Support Patch 17 Updatioin Error

Hi,
I'm facing problem while updating the Patch 17 to my SAP WAS...The installation stops at updating JDBC Drivers and the error in the log is
"ERROR 2006-10-11 12:25:26
FSL-06002  Error 1060 (The specified service does not exist as an installed service.) in execution of a 'OpenService' function, line (255), with parameter (SAPJ2E_01).
Please help me out in solving the problem......
Thanks in Advance...
Satya

Dear all,
Support packages will impact any configurations on DEV , QA servers, boz why i am asking this question , evert time i got error when i applied BASIS or ABAP like  Phase OBJECTS_LOCKED_?: Explanation of Errors then i have gone SE03 , i have tried to the unlock Request/Task SIDK****** , i got below message like ,
Unlocking requests/tasks may
cause inconsistencies.
Do you want to unlock the request/task?
Let me know its advisable to do Unlocking requests/tasks and Let me know i will impact any configuration and customised data .
Kindly advise.

Similar Messages

  • Error Applying BASIS Support Patch 10

    Dear all,
    I am facing syntax errror when i apply basis support patch 10.When i try to enter any T code its give me syntex error.
    And spam status show error stop IMPORT_PROPER
    Runtime Errors         SYNTAX_ERROR
    Date and Time          30.12.2008 01:31:48
    Short text
         Syntax error in program "SAPLKKBL ".
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLSALV" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
         The following syntax error occurred in program "SAPLKKBL " in include
          "CL_SALV_BS_DATA_TABLE=========CU " in
         line 20:
         "The type "T_TYPE_CELL" is unknown."
         The include has been created and last changed by:
         Created by: "SAP "
         Last changed by: "SAP "
    Please help me out for this error.
    Regards,
    Kumar

    Hi,
    Firstly, do you have a backup to fallback in a worse case situation?
    Is the import still running at the OS level - please check whether there is any active tp process at the OS level and the import log files in the DIR_TRANS/tmp directory getting updated ? What are the contents of the files?
    Cheers

  • Error During apply SAP_APPL  Support Patch

    Dear all,
    During the applying SAP_APPL Support Patch, I got the following error.
    Phase RUN_SPDD_?: Information on objects Modified in System
    The ABAP Dictionary objects were imported completely.This means that all imported ABAP Dictionary objects are now available in your system in the shipped original state.
    The system detected however that 1 of the ABAP Dictionary objects in teh support packages have been modified in your system.
    Check whether you want to retain or restore the changes you have made.
    To do this , call transaction SPDD (Choose 'call SPDD').
    For more information about performing the modification adjustment, see 'modification adjustment help'.
    Note:
    If you do not perform a mofication adjustment, all the changes to the objects named in transaction SPDD are lost after dictionary activation.If you have modified tables, this may lead to data being lost.
    help me.
    Regards,
    PC Patel

    Thanks Gagan & Amber,
    I ran the process in forground and got below notice :
    The ABAP Dictionary objects were imported completely. This means that
    all imported ABAP Dictionary objects are now available in your system
    inthe shipped original state.
    The system detected however that 1 of the ABAP Dictionary objects
    in the Support Packages have been modified in your system.
    Check whether you want to retain or restore the changes you have made.
    To do this, call transaction SPDD (choose 'Call SPDD').
    This is the biggest issue i am facing, I have done all adjustment in SPDD, all components are Green there. dont know why its saying 1 object left in SPAD.
    Second: Regarding the SPAU i am stuck on SPDD SPAU is still to come.
    Kindly suggest, Resolution will be appriciated.
    Regards,
    Gagan

  • Error after applying support patch SAPK-40009INCPRXRPM

    Hi all,
    In our PLM system after applying support patch SAPK-40009INCPRXRPM of component CPRXRPM, release-400
    we are getting some short dumps like CALL_FUNCTION_NOT_FOUND saying that OLR3_DMS_RFC_LOAD_OBJECT_LINKS function module can't found but this function module doesn't exist in the system.
    plz help me in this regard.
    Thanks in advance.
    Regards,
    Raja

    Thanks for the prompt response Samrat,
    But with SGEN we can only regenerate the programs, but here the problem is the module I mentioned doesn't exist in system.
    Regards,
    Raja

  • I tried updating to itunes 10.5 and now when i try to open itunes i get a message saying "Apple application support was not found" error 2 (windows error 2)

    Ok so I went to update my itunes 9 to itunes 10.5 and now I get and error message "Apple application support was not found" error 2 (windows error 2) when ever I try to run itunes and iv been trying to fix this for like a month and let me tell you iTunes for windows is **** and I really want Icloud for my iphone 4 and yes iv tried uninstalling everything by apple in the correct order and reinstalling them after restart atleast honestly 20 - 30 times but nothing worked so if anyone can please help me I have windows 7 and a hp intel pentium computer 

    Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
    tt2

  • While applying the patch getting an error Failed:xdoloader.class on worker

    Hi,
    While applying the patch getting an error Failed:xdoloader.class on worker

    While applying the patch getting an error Failed:xdoloader.class on workerPlease post the details of the application release, database version and OS.
    What is the patch number you are trying to apply?
    Please post the complete error message from adpatch log file.
    Thanks,
    Hussein

  • AutoCAD to PDF in Acrobat Pro 9.2 - not supported file or damaged error

    After watching the online Adobe eSeminar regarding 30 tips and tricks with Acrobat, I thought I'd try converting some sample AutoCAD files to PDF to show my wife who is an architect.
    I've downloaded several different sample files in both dwg and dwf format. None of them will convert to a PDF. I keep getting a not supported or damaged file error. I'm using File->Create PDF->From File
    I went through the Acrobat help search and it said that the default installation of Acrobat includes what is necessary to convert these files.
    I'm running Snow Leopard with Acrobat 9.2 as part of the Design Premium Suite, which was installed originally with Leopard. Are there more files on the installation disk that are needed to be able to do this feature?
    Steve

    SEEverist wrote:
    After watching the online Adobe eSeminar regarding 30 tips and tricks with Acrobat, I thought I'd try converting some sample AutoCAD files to PDF to show my wife who is an architect.
    I've downloaded several different sample files in both dwg and dwf format. None of them will convert to a PDF. I keep getting a not supported or damaged file error. I'm using File->Create PDF->From File
    I went through the Acrobat help search and it said that the default installation of Acrobat includes what is necessary to convert these files.
    I'm running Snow Leopard with Acrobat 9.2 as part of the Design Premium Suite, which was installed originally with Leopard. Are there more files on the installation disk that are needed to be able to do this feature?
    Steve
    You can't just drop such files on Acrobat. You at least need to run them through distiler, or Open a Cad Program and the go to print menu and click Save as PDF button and choose save as PDF, or Save as Adobe quility PDF. The only file that acrobat open natively other than PDF is PostScript which iy converts to PDF through Distiller.
    (Please note information is given by an Experienced User of Acrobat. I am not an employee of Adobe.)

  • Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

    Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

    Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access.  You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  You are welcome to post any specific errors discovered to this discussion.
    For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

  • Hi, I am unable to install new itunes version to windows 7 PC.  It requires application support and gives windows error 2.  I have tried to save on desktop and run as administrator but errors remains, what other options do I have

    Hi, I am unable to install new itunes version to windows 7 PC.  It requires application support and gives windows error 2.  I have tried to save on desktop and run as administrator but errors remains, what other options do I have?

    Hello, hanliefromzaf. 
    Thank you for visiting Apple Support Communities. 
    Here is an article that I would recommend going through when experiencing this issue. 
    iTunes for Windows: Unable to install or open
    http://support.apple.com/kb/ts5376
    Cheers,
    Jason H. 

  • Does Oracle XE 10g or 11g  have supported patches/bug fixes

    Does Oracle XE 10g or 11g  have supported patches/bug fixes?

    XE isn't patch-able, unfortunately- eg. in the section ...Major Features Not Included at http://docs.oracle.com/cd/E17781_01/license.112/e18068/toc.htm#XELIC116 a "patch set" is one of the "not included" items
    One could install one of the full release editions, get it patched, and upgrade an XE instance with the patch-able edition, but access to patches requires a support agreement.

  • Reduce downtime required for support patch application

    Dear Experts,
    I would like to know if there are any tips / notes we need to follow during application of
    support patches to reduce the downtime window ( as during patch application , system is not
    usable for normal users ) , any temparary parameter changes to Oracle RDBMS which we can
    activate before appication of support patch and then revert the same once Patches are loaded
    for normal Day operations.
    Is there any note which talks specific settings which could enhance the performance
    of support patch application process on Oracle RDBMS.
    Regards,
    RR

    To my understanding if i select Downtime minimized some phases of Patch application could
    be carried out when users are online and for others would get notified in SPAM for downtime
    , so we just need to lock users and perform start for those rest of Import phases.
    Yes this is correct, theoretically you can apply single patches with downtime minimized one after another. But this does not make a lot of sense obviously, because you will have several distinct downtimes then. So to apply one queue containing all packages is the way to go.
    Regarding your questions on the benefits, i am afraid the answer here is: it depends, as for most performance tuning options you will have to test carefully if the are working.
    For the db_cache_size consider:
    - is my db_cache_size smaller than 1000M?
    - do i have enough free memory on my server?
    - am i seeing low buffer hit ratio while applying support packages?
    If all questions are a yes, then i recommend you increase it to 2000M, it is easy to do. But if you don't have free memory on the server, then you will severly hurt performance by causing paging. If you don't have low buffer hit ratio (or you have lightspeed disks , then the tuning will not speed up anything.
    As you see, you have options, but there isn't a single speed button that solves your problem.
    Regards, Michael

  • Transport Directory / Directory for support patches not found

    I found that on our QAS & PROD system the profile param DIR_TRANS are exactly the same.
    I can transport to both systems.
    The problem I have is to upload Support Patches from the server.
    In other systems I have uploaded them assuming that sapmnt\EPS\in existed in PRODN, but I cannot find the directory usr\sap\trans\EPS\in on the PRODN system
    Would it be safe to add the profile DIR_EPS_ROOT in PRODN so that I can direct the SPAM trxn to pick up the unpacked support patches from the server to a specific directory?  This would be a standard change the the profile and restarting SAP correct?
    Please advise and Thank YOu
    Maria

    no longer required

  • I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times.  The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"!  Help please!

    I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times.  The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"!  Help please!
    Install appeared to run okay up to,, and including "shared Technologies"....

    Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows

  • What about support patches?

    hi,
           anyone please send me good information about basis support patches ECC 5.0.
    and also send what are the use full support patches in Basis administration.
    regards,
    [email protected]

    Check
    http://service.sap.com/patches
    All information you request is there.
    Markus

  • Kernal and support patch issue

    Hi all
    How can i install and run the kernal patch or support patch in SAP ?
    what the procedure for install?
    regards,
    Kevin
    Edited by: Kevin Wong on Jul 20, 2009 8:43 AM

    Hi,
    Kernel upgrade:
    download the Kernel file from the service market place..
    One with specific to your db and another db independent from service market place.
    Uncar the file and replace exe folder in your system.
    Before upgrading kernel you have
    1. Stop SAP
    2. Stop os coll
    If you have the latest version of sap and java stack installed you can use JSPM to upgrade your Kernel patch.
    You just download the SAR files and place it in EPS/in folder and run JSPM it will upgrade your kernel.
    Regarding the SPAM i.e support package upgrading
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCUPGOCSSPAM/BCUPGOCSSPAM.pdf
    http://help.sap.com/saphelp_nw04/helpdata/EN/d7/56e89a884b11d2b422006094b9ea64/content.htm
    Thanks & Regards,
    Balaji.S

Maybe you are looking for