Support patches upload

Dear Expert
I have fresh installation SAP Netweaver as component SAP Netweaver 2004s and OS is windows 2k3 32bit
when I download the support patch for market place there is show in Windows Server on IA32 32bit but my system is not itanium this plane server
Please help me how to download suitable patches for us.
Regards
Sanjay C.

Hi Sanjay,
what kind of patches you want to install? Is your system single (JAVA or ABAP) or dual stack (JAVA&ABAP)?
Good to know, that the supported platform for NW7.1 is only IA64 or x86_64.
Cheers,
Jiri

Similar Messages

Transport Directory / Directory for support patches not found

I found that on our QAS & PROD system the profile param DIR_TRANS are exactly the same.
I can transport to both systems.
The problem I have is to upload Support Patches from the server.
In other systems I have uploaded them assuming that sapmnt\EPS\in existed in PRODN, but I cannot find the directory usr\sap\trans\EPS\in on the PRODN system
Would it be safe to add the profile DIR_EPS_ROOT in PRODN so that I can direct the SPAM trxn to pick up the unpacked support patches from the server to a specific directory? This would be a standard change the the profile and restarting SAP correct?
Please advise and Thank YOu
Maria

no longer required

Proper Plan for SAP Support Pack Upload

Hi Experts,
We are going for Support pack upload of SAP at your firm.
Like to get your suggestions on the Plan we have done for going with the update.
The Present Level of SAP in our server is very low 8 stacks low approx in both the Development Server and Production Server.
What is the best way to apply them from the below mentioned plan.
1. shall we go for 1 stack in Development for the required components then test it for 3-4 days then go for the same stack in Production. So that both the server go sync with each other. This way going till the target stack one by one.
2. shall we go and upload all 8 stacks for the components required in development first one by one and then test the system for all the errors available and then start with the Production. Will there be a transport problem if the system are not in sync for the so many days.
Please suggest which one shall be best suited if any other plan can be used for safe and proper update of Support pack.
Jitesh

Hi,
1. shall we go for 1 stack in Development for the required components then test it for 3-4 days
then go for the same stack in Production. So that both the server go sync with each other.
This way going till the target stack one by one.
If Large Support Stack gape is there, then
1. I would perform system copy of Existing Development System into another separate New Test Server.
2. Then , I will generate Side Effect Reports based on the Source-to-Target Support Stack gape. You can request such side effect from SMP at https://service.sap.com/side-effects by selecting the solution and by providing source to target SP level per component.
3.Refer The required SAP Notes regarding OCS Know problems for the support patches. Apply latest SPAM/SAINT Updates. Apply Latest SAP Kernel patches.
4. Apply the Required Support Package stack after taking successful offline backup of Database.
5. Perform SPDD - SPAU adjustment and record it in single/Multiple Change requests.
6. Ask the function team to check the Functionality in new Upgraded TEST system
7. After Confirmation from the Functional & Technical Team, Apply the same support package stack in existing real DEVELOPMENT system and move that SPAU-SPDD adjustment request.
2. shall we go and upload all 8 stacks for the components required in development first one by one
and then test the system for all the errors available and then start with the Production.
Will there be a transport problem if the system are not in sync for the so many days.
The same above steps will be applicable here also. Change Requests Transports are not recommended between the systems which are on different Support Patch Stacks. With the above mentioned steps your downtime as well as Development Holiday will be minimized.
Regards,
Bhavik G. Shroff

Does Oracle XE 10g or 11g have supported patches/bug fixes

Does Oracle XE 10g or 11g have supported patches/bug fixes?

XE isn't patch-able, unfortunately- eg. in the section ...Major Features Not Included at http://docs.oracle.com/cd/E17781_01/license.112/e18068/toc.htm#XELIC116 a "patch set" is one of the "not included" items
One could install one of the full release editions, get it patched, and upgrade an XE instance with the patch-able edition, but access to patches requires a support agreement.

Reduce downtime required for support patch application

Dear Experts,
I would like to know if there are any tips / notes we need to follow during application of
support patches to reduce the downtime window ( as during patch application , system is not
usable for normal users ) , any temparary parameter changes to Oracle RDBMS which we can
activate before appication of support patch and then revert the same once Patches are loaded
for normal Day operations.
Is there any note which talks specific settings which could enhance the performance
of support patch application process on Oracle RDBMS.
Regards,
RR

To my understanding if i select Downtime minimized some phases of Patch application could
be carried out when users are online and for others would get notified in SPAM for downtime
, so we just need to lock users and perform start for those rest of Import phases.
Yes this is correct, theoretically you can apply single patches with downtime minimized one after another. But this does not make a lot of sense obviously, because you will have several distinct downtimes then. So to apply one queue containing all packages is the way to go.
Regarding your questions on the benefits, i am afraid the answer here is: it depends, as for most performance tuning options you will have to test carefully if the are working.
For the db_cache_size consider:
- is my db_cache_size smaller than 1000M?
- do i have enough free memory on my server?
- am i seeing low buffer hit ratio while applying support packages?
If all questions are a yes, then i recommend you increase it to 2000M, it is easy to do. But if you don't have free memory on the server, then you will severly hurt performance by causing paging. If you don't have low buffer hit ratio (or you have lightspeed disks , then the tuning will not speed up anything.
As you see, you have options, but there isn't a single speed button that solves your problem.
Regards, Michael

What about support patches?

hi,
anyone please send me good information about basis support patches ECC 5.0.
and also send what are the use full support patches in Basis administration.
regards,
[email protected]

Check
http://service.sap.com/patches
All information you request is there.
Markus

Error Applying BASIS Support Patch 10

Dear all,
I am facing syntax errror when i apply basis support patch 10.When i try to enter any T code its give me syntex error.
And spam status show error stop IMPORT_PROPER
Runtime Errors         SYNTAX_ERROR
Date and Time          30.12.2008 01:31:48
Short text
     Syntax error in program "SAPLKKBL ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSALV" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLKKBL " in include
      "CL_SALV_BS_DATA_TABLE=========CU " in
     line 20:
     "The type "T_TYPE_CELL" is unknown."
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP "
Please help me out for this error.
Regards,
Kumar

Hi,
Firstly, do you have a backup to fallback in a worse case situation?
Is the import still running at the OS level - please check whether there is any active tp process at the OS level and the import log files in the DIR_TRANS/tmp directory getting updated ? What are the contents of the files?
Cheers

Kernal and support patch issue

Hi all
How can i install and run the kernal patch or support patch in SAP ?
what the procedure for install?
regards,
Kevin
Edited by: Kevin Wong on Jul 20, 2009 8:43 AM

Hi,
Kernel upgrade:
download the Kernel file from the service market place..
One with specific to your db and another db independent from service market place.
Uncar the file and replace exe folder in your system.
Before upgrading kernel you have
1. Stop SAP
2. Stop os coll
If you have the latest version of sap and java stack installed you can use JSPM to upgrade your Kernel patch.
You just download the SAR files and place it in EPS/in folder and run JSPM it will upgrade your kernel.
Regarding the SPAM i.e support package upgrading
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCUPGOCSSPAM/BCUPGOCSSPAM.pdf
http://help.sap.com/saphelp_nw04/helpdata/EN/d7/56e89a884b11d2b422006094b9ea64/content.htm
Thanks & Regards,
Balaji.S

If skydrive support resumable upload or how to upload large files to SkyDrive through application

Hi,
Does SkyDrive support resumable upload. For 33 MB file upload it took almost 5 min to upload . So to minimise time to upload i want to use resumable upload.
Explain how it should be done.
I do not want to use BITS protocol as given in one of forum. I want to upload more than 100 MB files.
Thanks,
Ashlesha

Wrong forum.
Here is the forum for you.

Reg : Support patches to be installed

HI all ,
Need some info regarding the support patches to be applied to be applied for oracle 10.2.0.2 .for the operating system .SunOS pluto 5.10 Generic_137137-09 sun4u sparc SUNW,Sun-Fire-V240.Can u plz help me out .And the support patches that are applied at os level are applied for database only or for sap also ?thanx in advance.

Check
Note 832871 - SAP relevant patches for Solaris 10 on SPARC
Markus

Does iWeb support the uploading/downloading of files

I believe at one time, iWeb would support the upload and download of files from the mobileme account. I don't see anything like that in the templates. Am I correct in assuming it was there at one time and now it has disappeared?

It's still there.
This is how you do it.
Select something on your iWeb page you want to use as the hyperlink. (for example the words "link to file")
In the Link Inspector window check the box "enable as hyperlink" then select "Link to a file", then choose the file you want to link to. Publish, that's it. If you want the file to automatically open on the downloaders computer, then zip it first and select the zipped file to link to.
David

Error During apply SAP_APPL Support Patch

Dear all,
During the applying SAP_APPL Support Patch, I got the following error.
Phase RUN_SPDD_?: Information on objects Modified in System
The ABAP Dictionary objects were imported completely.This means that all imported ABAP Dictionary objects are now available in your system in the shipped original state.
The system detected however that 1 of the ABAP Dictionary objects in teh support packages have been modified in your system.
Check whether you want to retain or restore the changes you have made.
To do this , call transaction SPDD (Choose 'call SPDD').
For more information about performing the modification adjustment, see 'modification adjustment help'.
Note:
If you do not perform a mofication adjustment, all the changes to the objects named in transaction SPDD are lost after dictionary activation.If you have modified tables, this may lead to data being lost.
help me.
Regards,
PC Patel

Thanks Gagan & Amber,
I ran the process in forground and got below notice :
The ABAP Dictionary objects were imported completely. This means that
all imported ABAP Dictionary objects are now available in your system
inthe shipped original state.
The system detected however that 1 of the ABAP Dictionary objects
in the Support Packages have been modified in your system.
Check whether you want to retain or restore the changes you have made.
To do this, call transaction SPDD (choose 'Call SPDD').
This is the biggest issue i am facing, I have done all adjustment in SPDD, all components are Green there. dont know why its saying 1 object left in SPAD.
Second: Regarding the SPAU i am stuck on SPDD SPAU is still to come.
Kindly suggest, Resolution will be appriciated.
Regards,
Gagan

Does Skydrive Support resumable upload for large files

Hi,
Does SkyDrive support resumable upload. For 33 MB file upload it took almost 5 min to upload . So to minimise time to upload i want to use resumable upload.
Explain how it should be done.
Thanks,
Ashlesha

Hi u_os,
This forum is to discuss problems of Windows Forms. Your question is not related to the topic of this forum.
I suggest you posting it in the OneDrive Forum http://answers.microsoft.com/en-us/onedrive/forum?auth=1 for supports, where you can contact OneDrive experts.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have a Canon RebelXS digital camera. Do I need to install the specific Canon Software to my IMAC to upload my photos or will IMAC software support this upload?

I have a Canon RebelXS digital camera. Do I need to install the specific Canon Software to my IMAC to upload my photos or will IMAC software support this upload?

I think you'll find that iPhoto will recognize your Rebel and load it's pictures (does for my RebelXT). If you don't want to use iPhoto, then yes, you'll need to download the software that came on a disk with the camera, and possibly update it (from the Canon site) based on the operating system you're running.

IGS patch upload

Hello everybody,
I want to upload the IGS patch, then how to upload, can i use the regular procedure as regular patch upload or IGS file contains standalone installation setup, please suggest me
Thanks

Hai,
Check the SAP Note 718267, this will help.
Also check 458731.
Regards,
Yoganand.V
Edited by: Yoganand Vedagiri on Jan 12, 2009 3:30 PM

Support patches upload

Similar Messages

Maybe you are looking for