Support: Searching for PC audio connection (TV:32W2333)

HI,
I just bought a 32W2333 LED TV and I was trying to connect my computer.
I need to do it with a monitor PC cable and I bougth the TV because I saw it has a PC connection slot (RGB/PC connector in the back of the TV).
But I was unable to find the sound input for that connection slot. Is there any way for the TV to receive the signal of the PC and show the monitor of the PC at same time?.
Thanks.
Javier.

>javiercuest says "I just bought a 32W2333 LED TV and I was trying to connect my computer.
>I need to do it with a monitor PC cable",
My question is, why MUST you use a "monitor PC cable"??
Is there a reason you cannot use an HDMI cable, as has been discussed in other threads in this forum??
donhe7

Similar Messages

  • HT4628 After installing the new OS from apple (10.8.2) my macbook pro keeps disconnecting from the internet.  I am connecting with an Airport Extreme and while it shows I am connected, every 20-45 seconds its searching for a wireless connection.  Any sugg

    I guess I posted my question as a title but that is my issue.  My airport is connected via wireless yet it keeps searching for a wireless connection, hence I am experiencing bad latency and disconnection issues.  Anyone know a solution?

    I have the same problem. And in my case it happens when i transfer "large" files over the WiFi. When i send an MP3 filer over Skype i loose connection. When i transfer updates between my iPhone 5 / iPad 3 and iMac with Mountain Lion i loose connection. When i have a video conference i loose connection. You get the idea.
    There is usually like 30 people using their own router on the 2.4 GHz band near by. None on the 5 GHz band which i use. But when my WiFi freezes on ML i can only see my own router. And i am also connected to it. But all my neighbors WiFi routers are now invisble to me. My network stalled.
    What i do is that i disconnect my WiFi and then reconnect it again. Thank fixes it. But all my transfers and what not has been dropped. And i have to start all over - and the WiFi will stall again.
    While my WiFi is frozen on the iMac with ML i have no problem using the same router on the same 5 GHz band with my iPhone 5 or iPad 3.
    Downgrading the AirPort Extreme to 7.6.1 from 7.6.3 helped a bit. Now i only loose connection a few times each day.
    It is a software error in ML i am sure of. A driver maybe. But i am suspecting that it is either a speed-sync error or an energy saving error. Like the network card turns of in the middle of a file transfer to save enrgy - maybe.
    When i stream movies from my iMac to my Apple TV or  3 there is no problem at all. It is so odd.

  • Outlook 2010 search for contacts of connected account

    Hello.
    My client has one issue: they can search contacts in their exchange account but the results don't return contacts from an account that she is authorized to (she can see emails from this other account). She doesn't remember what triggered it she just said
    it stopped working. The other person has Mac. How do you enable or troubleshoot search shared contacts from connected accounts?
    She is using Windows 8 and Outlook 2010 and they have internal exchange server 2007. I have seen this post: http://social.technet.microsoft.com/Forums/en-US/0403a096-49b1-4a87-a34f-44566c9cf9ab/outlook-2010-searching-a-shared-users-contacts?forum=outlook
    where it points me to another site but it doesn't say what the problem could be if you can't search from shared contacts.

    Hi,
    Is the user searching within the shared Contacts folder?
    Switch to Outlook Online Mode and search, does the issue persist?
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install Configuration
    Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office programs.

  • My iPad2 quit connecting to wireless network. Won't turn on, won't search for networks, no connection

    A couple of days ago, my 1 month old iPad2 quit searching for wireless networks, won't recognize my home network, and the wi-fi connection won't stay on. I can switch it on, but it doesn't do anything (won't search for wifi) and as soon as I move away from that window, it switches back to "OFF". Anyone have a fix for that, or is it a problem that can only be resolved with returning the product for repair or replacement?

    If no change after resetting network settings on your iPad and/or after restoring your iPad with iTunes as a new iPad or not from the iPad's backup, your iPad has a hardware problem.

  • Automatic search for wi-fi connection

    The moment i unlock my cell it asks for searching for wi-fi availability. The messsage appears Search for WLAN. Though i have tried changing settings through Menu>Settings>connection> WLAN but the problem persists. Can we avoid getting this notification again n again.

    Go to settings > connectivity > wlan > options > settings > show wlan availability > never, before that remove the wlan widget from the homescreen.
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • WRT54G v8 - searching for Channel after connected, then fails, no internet for wireless connection

    So I have Time Warner Cable Internet
    WRT54G v8 with the 8.00.2 software
    MAC Address Cloning off
    WEP encryptian with 64-bit
    Tpad1 - Thinkpad z61p
    Tpad2 - Thinkpad T41
    Dell - Crap
    All of these worked two weeks ago and I can't remember installing or removing any software on any machines.
    I have had a few of the problems that many have had so far and it is hard to narrow down what the true symptoms are so I will start with these.
    If I power cycle cable modem, then plug in router, then wire connect in Tpad1 internet works fine. If I try to add the Dell wireless internet most of the time works fine. But when I try to unplug the Tpad1 and it tries to connect wirelessly it can't do it and then the Dell loses connection and the power light blinks and then stops and then blinks again.
    I also had the settings open on Tpad1 so that I could see some detail. It looks as if the software on the Tpad1 is trying to find a channel to connect to, then it will connect on the channel I specified in router at 54mbps work for a Google page load then disconnect and start searching for a channel again and the connection drops to 1mbps.
    After this if I turn the Tpad1 off and try to connect the Dell wirelessly that won't work, and if I try to connect through wire it does not connect either.  I need to unplug or reset the router.
    Possible Solutions:
    1. re-flash router - will try
    2. Change wireless settings such as beacon interval to 50, framentation threshold to 2306 or 2304, RTS Threshold to 2307 or 2304
    3. Using CD to install the internet connection

    So this is still an issue. 
    I have come to find that if I am only connecting my Tpad1 to the wireless router it eventually works. It connects and then when I try to access a web page it starts looking for the channel again and then finds it again. Once this happens three or four times (looking for the channel) it seems to get a solid connection and no longer looks for another channel.
    After this I think it is okay for the Dell to connect but I can't 100% remember now.
    We just have avoided using our computers at the same time on the wireless network together.
    also.... when the Dell is connected and then Tpad1 tries to connect, Tpad1 kicks Dell off and Tpad1 can't connect with a solid connection; and after three or four times of re-connecting for both computers the wireless network becomes no longer visible, almost like the router locks up. So a reset of the router and the Dell can connect fine as long as the Tpad1 does not even try.
    This post is being done by Tpad1 connected wirelessly because I am working from home and no one else is trying to get on.

  • Supported formats for capturing audio

    I need to capture audio in PCM format.
    According to the JDE 4.6.0 Multimedia Guide:
    "The BlackBerry® smartphone uses two formats to record audio: Adaptive Multi-Rate (AMR) and 8 kHz mono-16-bit pulse code modulation (PCM). By default, the format is AMR.
    PCM: capture://audio?encoding=pcm or capture://audio?encoding=audio/basic"
    However, when I run the code:
    Manager.createPlayer( "capture://audio?encoding=pcm" );
    This works on a Pearl 8100, but on a Pearl 8330, I get a MediaException, with the error:
    Unsupported record encoding type
    Do all handsets support PCM encoding? If not, where would I find out the capabilities of the different models?

    Supported audio formats by BlackBerry -
     The following audio formats (including extensions) are supported:
    ACC - audio compression formats AAC, AAC+, and EAAC+
    AMR - Adaptive Multi Rate-Narrow Band (AMR-NB) speech coder standard Supported AMR-NB rates are 4.75 KBps, 5.15 KBps, 5.9 KBps, 6.7 KBps, 7.4 KBps, 7.95 KBps, 10.2 KBps, and 12.2 KBps. AMR
    files must conform to the standards specified in the Internet
    Engineering Task Force (IETF) Request for Comments (RFC) document
    RFC3267, Section 5, on the Internet RFC Archive web site.
    MIDI - Polyphonic MIDI (.mid, .midi, or .smf)
    MP3 - encoded using MPEG Part 1 and Part 2 audio layer 3 Supported sample rates are 16kHz, 22.050kHz, 24kHz, 32kHz, 44.1kHz, and 48kHz.
    WAV
    - supports sample rates of 8 kHz, 16 kHz, 22.05 kHz, 32 kHz, 44.1 kHz,
    and 48 kHz with 8-bit and 16-bit depths in mono or stereo WAV files
    created using audio codec GSM6.10 are supported. However, BlackBerry
    8830 series smartphones do not natively support Global Systems for
    Mobile Communications® (GSM®) encoding and require the BlackBerry
    Attachment Service from either the BlackBerry® Enterprise Server or the
    BlackBerry® Internet Service. See KB13547 for more information. Note:
    Playback of WAV files received as email message attachments requires
    BlackBerry Enterprise Server software version 4.1 Service Pack 2
    (4.1.2). Note: If the BlackBerry smartphone
    user has a BlackBerry Internet Service 2.3 account with BlackBerry
    Device Software 4.2 or later, WAV voice mail files will work.
    Windows Media Audio (WMA 9) Standard Profile Decoder WMA 10 Professional M0 Profile Decoder WMA 9 Profile Decoder and WMA 10 M0 Profile Decoder are only supported by BlackBerry Device Software 4.2.1 or later. See KB05419 for more information.
    The
    following audio file extensions are also supported (depending on
    BlackBerry smartphone model and BlackBerry Device Software version):
    .avi containing PCM, MP3, AAC, AAC+, eAAC+, H.263, MPEG4-SP, MPEG4-ASP, uLaw/aLaw, GSM610
    .3gp containing MP3, AMR-NB, AAC, AAC+, eAAC+, H.263, MPEG4-SP, MPEG4-ASP, uLaw/aLaw, AMR-NB
    .mp4 containing MP3, AMR-NB, AAC, AAC+, eAAC+, H.263, MPEG4-SP, MPEG4-ASP, uLaw/aLaw, AMR-NB
    >.mov containing MP3, AMR-NB, AAC, AAC+, eAAC+, H.263, MPEG4-SP, MPEG4-ASP, uLaw/aLaw, AMR-NB
    .wmv containing WMV, WMA9/10Pro
    .aac and .m4a containing AAC, AAC+, eAAC+
    .wav containing PCM, uLaw/aLaw, GSM610
    Note:
    Support is available for streaming stereo audio over a Bluetooth®
    connection (A2DP and AVRCP Bluetooth profiles) on the following
    BlackBerry smartphone models:
    BlackBerry® 8800 Series smartphones (running BlackBerry Device Software 4.2.2 or later)
    BlackBerry Curve 8300 Series smartphone (running BlackBerry Device Software 4.2.2 or later)
    BlackBerry Pearl 8100 Series smartphones (running BlackBerry Device Software 4.2.2 or later)
     Note: DRM (Digital Rights Management) copyright protected files will not play on BlackBerry smartphones.
    Source: KB05482 
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • My wifi will not detect networks and will not search for other networks when I search for them. Do I need a new iPhone or can I fix it myself?

    My wifi is on and when it tries to find a wifi connection, the gray little circle just keeps spinning and will not detect our home wifi. I have tried to search for it and connect to it manually, but it will not search for the network name. I'm hoping I don't need a new phone so please help.

    The following may have something that will help: http://support.apple.com/kb/TS1398

  • Searching for files manually, arghhh

    My newly installed 7.2 doesn't search for the audio files required in the song efficiently. I have to do it all manually folder by folder. Any clues anyone? I didn't have this problem previously. Cheers
    MacBook 2ghz 1gig ram   Mac OS X (10.4.7)  

    Hi rat salad (yum),
    Do you have Pro Application Support installed?
    Did you ever organize your sounds with the Project Manager? It takes a half a day depending on how big your hard drives are, but it makes a huge difference

  • Can't search for wireless on L655-s5150

    I cannot search for wifi on my L655-S5150. I can only access the Internet via an Ethernet cable. This randomly happened about two weeks ago, and I can't even search for wifi. Connections are constantly not available.

    Satellite L655-S5150 (PSK2CU-0K101S)
    Downloads here.
    Whichever card it is, sounds like it's dead.
    This Realtek card will work in that model with the driver listed: A000073800
    For its location, go here.
    -Jerry

  • Is there a way to search for audiobooks or books in different languages?

    Hi well my question is very simple. My native language is Spanish but I am a German citizen and I would like to read one or the other book in Spanish or listen to audiobooks in Spanish. But if I want to search for these products in my German iTunes-Store I will only get the newest German books or German audiobooks.Is there a way to search for an audio book or a book in Spanish or other languages? Thank you very much!!!

    Exactly that -- the procedure is described in the online Help: InDesign Help | Text variables
    Now every time you insert the variable named "# of potatoes", you'll see the text "50" appear (with a minimal rectangular marker to indicate it's a variable), and when you want another number of potatoes, all you have to do is adjust the text in the Variables dialog.

  • HT1414 my iphone 4 turns on but cannot make calls or send texts because it is "searching" for service it says to connect to itunes but when  connect it to my itunes it doesnt pop up and i need my phone to work asap !

    i have an iPhone 4 and it turns on but it keeps "searching" for service and it says to connect to my itunes and a support grouop but when i plug it into my laptop (and i have a toshiba not a mac) my phone doesnt even connect so i have no idea whatas going on with my phone and i need it asap!

    Check your connection - Reset Network Settings - Toggle Airplane Mode -
    If none of those help hard reset the phone
    Hold down the Home button and the Power on/off button "at the same time"
    -Screen will go black then after a few seconds you should see the Apple Logo, once you see the logo let go of both buttons. Allow the iPhone to reboot-

  • I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem.  How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

    I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port).  I see the drive on my laptop and I can add and delete files no problem.  How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive?  I don't have enough space to do that.

    How did you move the music to the external drive?  What exactly is on the drive?  The entire iTunes folder or only music?  If it is the entire iTunes folder you can do the option+start suggestion earlier.  If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move.  iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

  • I get an error that says can't connect to the itunes store when I search for a specific artist only

    Hi all,
    When I try to search for music by a specific artist in the iTunes store on my iPhone 5, I get an error that says "Can't connect to the iTunes store".  This only happens when I search for music by this band.  I can search for other artists and listen to song clips and everything seems to be connecting to the iTunes store just fine.  But for some reason, it doesn't work with this artist.  The band name is July for Kings.  Not sure if anyone else has had this issue, but I hope so!
    Thanks,
    Rick

    IF you are not able to resolve your issue then contact Apple Support at https://getsupport.apple.com/GetproductgroupList.do?caller=ikb&PRKEYS=PL220,1316 29,PL113,PL302,PF3,PF4,PF9,PL303,PL339,p…
    hopefully they can help. You may also be interested to know that for some reason it is just not available to a lot of people at the same time. Appears to be an issue of more users than their servers can handle. Has happened periodically for at least 6 months that I know of but apparently users are able to use within several days if there are no other issues with the users device.

  • I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed. How can I upgrade my OS to 10.6 or better?

    I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed (and am given no option for updating my OS). How can I upgrade my OS to 10.6 or newer?

    You have to understand the difference between an Update and an Upgrade.
    An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .8 added to OSX 10.5 or the .11 added to OSX 10.4..
    An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
    10.5 Leopard was written for Power PC Macs with code added to force it to run on Intel processors.
    10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
    10.7 Lion ($19.99) used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
    10.8 Mountain Lion ($19.99) is pure 64 bit, which excludes more systems than Lion did. It can only run on the Late 2008 through Mid 2010 MacBooks. It's not something you can add memory to, for example, as it involves the base architecture.
    10.9 Mavericks is pure 64 bit and is a free download from the App store.
    The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion, Mountain Lion or Mavericks which are downloads only.
    System Requirements for 10.6:
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
      Some features require a compatible internet service provider: fees may apply.

Maybe you are looking for