Support Stack 17 documentation

Good Day.
I am having a bit of a problem locating the documentation for Solution Manager Support Stack 17.
I have looked at the Installation & upgrade section but was unable to find anything. Would someone be so kind as to point me in the right direction
Regards
Don

Hello Don,
Please use the following link to check the information of the Solution Manager 7.0 Support package stack 17.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sps/info.do?pvnr=01200314690900000235&stcknr=01200314693300000878&langu=E&user_logged_on=S0004308721
Hope it helps,
Cheers,
Satish.

Similar Messages

SolMan Support Stack 17 Manual

Good Day
I am looking for the documentation for Support Stack 17. When Support Stack 15 was released, there was an updated manual (some 730 pages). Does anyone know if there was anew guide released with Support Stack 17? If so, would you be so kind as to point me in the direction of where it may be located.
I have looked under Service.SAP and I do not see anything for Suopport Stack 17
Regards
Don

Hi Don,
SP17 was only a minor shipment with corrections.
Next update of Application Help (http://help.sap.com) will be published for SAP Solution Manager 7.0 EhP1 Stack (ST 400 SP 18).
Best regards,
Ruediger

Difference between Support Stacks & Support Packs

Hi All,
Just the general question.
Difference between Support stacks & Support Packs? Please explain.
Thanks you all.

You can find all the products existing into CRM in the PeopleSoft Enterprise CRM 9 Product-to-PeopleBook Index, with the name of each linked Peoplebook to refer on the main CRM Peoplesoft documentation page.
And especially the PeopleSoft Enterprise CRM 9 Call Center Applications PeopleBook about Support and HelpDesk features.
Nicolas.

FPN - Producer and consumer support stack synchronication?

We have BI portal as a producer portal to a consumer portal (corporate portal). Both are on support stack 13 at the moment. We need to apply support stack 14 to the BI portal. Do we need to apply the same support stack to the consumer portal? Is there support documentation that contains this information?
Thanks.

Rich,
We were on SP13 on both CP and PP but we ffound at least one problem when we upgraded BI PP to sp14 and CP is still on SP13. I am not certain that this problem is because of SP synchronization but I do suspect. We are looking at patching CP to SP14 and see if the problem dissapears.
Yes, as per SAP both CP and PP can be on different SPs.
Regards,
Kiran

XPRA_EXECUTION error while importing Support stack 8 in Solution manager 4

We have installed Solution managr 4.0 on Windows 2003 OS. We are trying to inport support stack 8, but we are getting the XPRA_EXECUTION error while importing SAPKW70009. Following is the error log
Short text
Syntax error in program "CL_RSOBJS_TYPE_MANAGER========CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLRSVERS" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSOBJS_TYPE_MANAGER========CP " in include
"CL_RSOBJS_TYPE_MANAGER========CM00G " in
line 1:
"Method "GET_TEXT_OF_SEARCH_ATTRIBUTE" does not exist. There is, howeve"
"r a method with the similar name "GET_SEARCH_ATTRIBUTES"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_RSOBJS_TYPE_MANAGER========CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
CL_RSOBJS_TYPE_MANAGER========CP :
"Method "GET_TEXT_OF_SEARCH_ATTRIBUTE" does not exist. There is, howeve"
"r a method with the similar name "GET_SEARCH_ATTRIBUTES"."
We have tried clearing the queue and restarting the import but it does not work.
Can anyone please help us with the same.

Please, i need help. I have a problem when importing SAPKB62030 on phase XPRA_EXECUTION. This is the error:
The import was stopped, since an error occurred during the phase
XPRA_EXECUTION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
-   Error in phase: XPRA_EXECUTION
-   Reason for error: TP_STEP_FAILURE
-   Return code: 0008
-   Error message: OCS Package SAPKB62030, tp step R, return code
          0008
What can i doing?

Would you please provide Snote for BI7.0 SP09(BI 7.0 Support Stack 09)

Hi,
Would you please provide Snote for BI7.0 SP09(BI 7.0 Support Stack 09).
What would be the pro and cons if i would go for BI 7.0 SP09
Is there any issue with data loads and BEx queries if we go for BI 7.0 SP09.
For one week we will go for BI7.0 SP09(BI 7.0 Support Stack 09) and later we would go for BI 7.0 SP15.
Please some can advise me on this
Edited by: Krish b on Jun 16, 2008 9:15 PM

1. Data flows do not need to be migrated into the 7.x fashion specifically but it is advisable.
2. no idea
3. Old Authorization concept of the BW 3.X is not longer supported. Before 7.3 upgrade you have to migrated to new concept.

BI/Netweaver Support Stack 17 and 18 source system dependencies?

Does anyone know what are the source system dependencies for BI/Netweaver Support Stack 17 and 18? I have looked everywhere online and I cannot find anything. Any help would be much appreciated it. Thanks!

Those dependencies are describe in the stack information in SAP Marketplace
Regards
Juan

Solution Manager 4.0 Support Stack 9

Support Stack / Support Pack 9 of Solution Manager has been called an Enhancement Pack or Feature Pack by SAP. This means it includes new functionality. Two new features that I have been able to identify are the Maintenance Optimizer and the "Synchronize system data with SAP Support Portal" tab of SMSY.
Has anyone found some sort of release notes for the Enhancement Pack so that I can find out what other new features were deployed as part of the stack?

Hello Steven,
You can find the requested set of support package stack news on the SAP Service Marketplace page, quicklink /solutionmanager -> Media Library -> Technical Papers, document called: "4.0 Support Package Stack 9"
Alternatively you may use the following link to directly access this document:
<a href="http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700006487392006E">http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700006487392006E</a>
The correct term for this development package is "support package stack" with the respective stack numbering as outlined on the front page of this slide.
I hope this helps in finding the requested information.
Best regards,
Doreen

NDS for Support Stack 11 - where to download

Hello All,
I am new to the Netweaver version of EP6. I am looking for where to download the Netweaver Developers Studio for this version of EP and I need it to be compatible with Support Stack 11 (we just installed).
I feel like this is a "stupid" question, but I need to know.
Many thanks,
Rich Conkling

Hi Rich,
You can get any version of Dev Studio from https://service.sap.com/swdc and navigate to Support Packages and Patches -> SAP NetWeaver -> SAP NetWeaver components ( < SAP NW 04 )-> SAP WEB AS -> SAP WEB AS 6.40 -> SAP NW DEVELOPERS STUDIO 2.0 -> Win32 and then pick the SP11 download from the list.
I believe the patches are cumulative.
You will need to have a service.sap.com account to do this.
Rob

Upgrade from support stack 12 to support stack 17

Currently I am on a client that has support stack 12 and needs to upgrade to support stack 17. My only question is what are dependencies that will be needed to be able to upgrade to 12 to 17, because I know this will not be a easy move. Any knowledge would help on this issue. Thanks!

just visit http://service.sap.com/rkt-Solman
select your solman version like 7.0, opt for section 'Technology consultants and System Administrators' and then technology configuration learning map
there you will find two sim files for the usage of Mopz in solman, simple usage and normal usage
and refer this SDN guide
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60d6ce0d-734f-2a10-e596-adbce4df51a8
http://help.sap.com/saphelp_smehp1/helpdata/en/45/56dd10b5f62a50e10000000a11466f/frameset.htm

SDM unapply support stack and deploy lower sps

Our portal sits on nw2004s java stack only (700 and support stack 11). Would like to rollback sps 11 and apply sps 10 so that it matches our BW ABAP support stack level. Is this possible to rollback the java stack support stack level?
The thought is to use SDM to undeploy all components, select all sps 10 components (SCA's) and deploy.
Would appreciate any comments in regards to this, is this the corrrect procedure or even possible?

Hi,
The SDM is one of the options to choose for undeploying an application. But I basically prefer using the J2EE Engine's visual administrator tool (it is more intuitive in my opinion). Here's how to deal with it:
1. Start the tool using the go.bat located in \usr\sap\<SID>\<Instance Name>\j2ee\admin folder
2. Log in with an Administrator user.
3. Under the Server node click Services-> Deploy.
4. In the runtime tab, on the right hand side screen click on the Applications checkbox. The list of all deployed applications appears.
5. Select the application and click on the Remove button.
http://img143.imageshack.us/img143/600/vaxu5.jpg
Undeploying using SDM
You can also undeploy the application using the SDM tool. Launch the tool by running the remotegui.bat from your usr\sap\SID\JC00\SDM\program. Enter your sdm password and then go to the undeployment tab. pick the application you want to undeploy and add it to the right hand pane and follow the steps in the wizard
Check this official SAP link for deployment and undeployment details.
http://help.sap.com/saphelp_nw04/helpdata/en/28/2c3c1bf823204c8370bfacbe54133b/frameset.htm
with regards,
Kanthi

Support Stack

Hello,
I am having difficulty deploying the latest support stack to the discovery system using SPAM. At first, tp.exe was having problems connecting to the database but this was due to the erpadm user not having write access permissions to the file system. When I resolved this, I then encountered an error that the environment variable dbms_type is not set when in fact it is set as a user variable for erpadm. When I run tp.exe. from the commmand line and try connecting to the db (tp.exe connect ERP), it states that the SAPEVTPATH is not set. But, if I explicitly tell it which profile to use in the command line (tp.exe pf=D:\usr\sap\trans\bin\tp_domain_erp.pfl connect ERP), it connects without error. Any ideas?
Thanks,
Greg

Hi!
You cannot apply the SPS as a 'Stack' without the .xml-File. As a workaround for your situation you could try to pseudo-download the SPS from the Service Marketplace (meaning you navigate through the required steps but never actually download any files) and generate the .xml-File there. This should work if the fileversions you have on the CD are exactly the same as you would download. If there are differences in versions or so you might have to edit the .xml-File.
It may be quicker to work without the .xml though. In this case you would patch JSPM itself first and then apply all the other patches.
Regards,
Jörg

Support Stack 17 When?

Good Day;
Does anyone know when Support Stack 17 will be available? I can not seem to find any info.
Regards
Don

Please find the detailed schedule with planned days here:
SAP Solution Manager Support Packages
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000595040&_SCENARIO=01100035870000000202&_OBJECT=011000358700005273772003E

Are Support Stacks Cumulative?

Hello everyone,
I have a quick question related to SAP Support Stacks. We are on ECC 6.0. SP Stack 17 contains HRSP 53 and SP stack 18 contains HRSP 59. Does this mean that the support stacks are cumulative. That is, that SP 18 contains HRSPs 54 thru 59?
Thank you again for your assistance.

The SP-Stacks by themselves are not cumulative i.e. you will have to apply every Support Package Stack 17, 18 in that order.
But every component in the stack is consistent & cumulative.
So what you see as the SAP HR 6.00 SP-level is the highest SP level supplied in that stack & it has rest of the SP's as well.
So as SP-Stack 17 has until 53 of SAP HR, SP-Stack 18 has 54,55,56.57.58 & 59. You can also check it for yourself in the URL that I had provided in the earlier thread by selecting the source stack as 17 & target as 18.
- Regards, Dibya

HRSPs vs SAP Support Stacks

Hello everyone,
I'd like to confirm this forum if all HRSPs up through 59 are included within the SAP Support Stack thru #18.   If this is true, are any of you in an organization that applies Support Stacks in lieu of HRSPs? If so, how do you associate a Support Stack with an HRSP?
Here is some background:
u2022     SAP has indicated that Support Stack 18 is the base line Support Stack for year end.
u2022     My customer is on ECC 6.0 and is significantly behind on their HRSPs.
u2022     Basis is actively trying to get us to HRSP 61 (the baseline HRSP for year end) by the end of this month.
u2022     Basis will not apply HRSPs (except for #60 & 61), instead, they have begun applying SAP Support Stacks 15-18.
u2022     The Basis staff feels that HRSPs (36-59) are included within these support stacks.
Thank you for your assistance.

Can you please read the "Rules of Engagement" in SDN?
https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement
And please open a separate thread for this.
- Regards, Dibya

Support Stack 17 documentation

Similar Messages

Maybe you are looking for