Support the launch of an NI TestStand Idea Exchange!

Calling all TestStand users!
While I love TestStand, I've got some ideas on how it could be improved, and I'm sure you do too.  NI recently launched a new platform for getting and tracking ideas on how to improve thier products called the NI Idea Exchange.  If you haven't seen what it's about, see the intro video here and then have a wander through the wildly successful LabVIEW Idea Exchange here.
There's already a LabVIEW Idea Exchange, a LabVIEW RT Idea Exchange and a LabVIEW FPGA Idea Exchange, so why not a TestStand Idea Exchange?  Well, setting it up and supporting it takes time and resources, so, we need to let NI know that we think having one is worthwhile.  If you're interested in furthering the development of TestStand, you need to let NI know that you're interested in a TestStand Idea Exchange!  If the idea of a TestStand Idea Exchange appeals to you, please post here to show your support.
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.
Solved!
Go to Solution.

Great idea!

Similar Messages

  • Diuplicate posts on the NI TestStand Idea Exchange

    Hi Laura,
    How do we get duplicates posts removed from the NI TestStand Idea Exchange.
    Regards
    Ray Farmer

    Laura,
    I thought there must have been an Option menu but couldn't initiately find it hence my post. But I have located now and notified of the duplicate.
    regards
    Ray
    Regards
    Ray Farmer

  • Memory usage of big Array in sub-VI (was: Allow the creation of "Inplace"-VIs of Idea Exchange)

    Hi,
    this thread is based on my post in the LabVIEW idea exchange.
    I put my VIs in the attached .rar file.
    Regards
    Marc
    CLD
    Solved!
    Go to Solution.
    Attachments:
    Inplace_VI.ZIP ‏21 KB

    That would be a good explanation.  There was a thread on something very similar to this recently.  Can't remember exactly the topic but Daniel's answer certainly triggered some memories of a very similar discussion taking place.
    I think it had to do with LV assigning a Array created as a constant as Read-only so in order to make changes to it it needs to be copied to a new memory location, thus leaving the constant unchanged.
    I wonder how it performs in other LV versions.
    Shane.
    PS: Found the thread.  HERE.
    Message Edited by Intaris on 08-20-2009 03:23 AM
    Say hello to my little friend.
    RFC 2323 FHE-Compliant

  • Cat0-3750 upgrade. Error: system number 1 does not support the same feature

    I am trying to upgrade or rather downgrade from ipadvservices (inadvertently upgraded to) to ipservices on a stack of Cat-3750s, but I get the following error message:
    Ios Image File Size: 0x00877A00
    Total Image File Size: 0x00B04200
    Minimum Dram required: 0x08000000
    Image Suffix: ipservicesk9-122-37.SE1
    Image Directory: c3750-ipservicesk9-mz.122-37.SE1
    Image Name: c3750-ipservicesk9-mz.122-37.SE1.bin
    Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
    Error: The image in the archive which would be used to upgrade
    Error: system number 1 does not support the same feature set.
    Any ideas?
    Chris

    I was having the same issue even with entering the following:
    archive download-sw /overwrite /allow-feature-upgrade tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
    I noticed the image which was running on the switch was correct without the ".bin" at the end:
    3560#sh ver | i image
    System image file is "flash:c3560e-universalk9-mz.150-2.SE7"
    I uploaded a fresh IOS image from CCO and made sure the image name had ".bin" at the end. Seems trivial except the error is produced through a sanity check. See below (please excuse the extra unplugging in the output):
    3560#sh ver | i image
    System image file is "flash:c3560e-universalk9-mz.150-2.SE7.bin"
    3560#$de tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
    Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!
    Mar 30 01:33:35.480: %USBFLASH-5-CHANGE: usbflash0 has been removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Mar 30 01:34:15.636: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding!!!!!!!!!!!
    [OK - 24893440 bytes]
    Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!
    Mar 30 01:34:35.593: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 2 removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    examining image...
    extracting info (100 bytes)
    extracting c3kx-sm10g-mz.150-2.SE7/info (499 bytes)
    extracting info (100 bytes)
    System Type:             0x00010002
      Ios Image File Size:   0x017BDA00
      Total Image File Size: 0x017BDA00
      Minimum Dram required: 0x08000000
      Image Suffix:          sm10g-150-2.SE7
      Image Directory:       c3kx-sm10g-mz.150-2.SE7
      Image Name:            c3kx-sm10g-mz.150-2.SE7.bin
      Image Feature:         IP|LAYER_3|MIN_DRAM_MEG=128
      FRU Module Version:    03.00.78
    Updating FRU Module on switch 1...
    Updating FRU FPGA image...
    FPGA image update complete.
    All software images installed.
    Worked for me, hope this helps.

  • Command line options / API Support to launch the sequence file

    does teststand support any command line options / API Support to launch the sequence file and also populate the test run status. I want to explore the option of integrating the teststand with QC where I can launch the sequence from QC and results are sent back to QC.
    Thanks in advance,
      -Dilip

    Hi Dilip,
    Here are the command line options for TestStand v4.2.1:
    Command Line Processing
    Command line usage:
       seqedit.exe [<sequence file>]
                   [/goto <location>]
                   [/run <sequence> <sequence file>]
                   [/runEntryPoint <entry point> <sequence file>]
                   [/quit]
                   [/setCurrentDir]
                   [/useExisting]              
                   [<workspace file>]
          <location>:  property object path to the item to display in the file
                   Location examples:
                         TestExec.exe c:\example.seq /goto "Seq[\"MainSequence\"].Main[\"Power On\"]"
                         TestExec.exe c:\example.seq /goto "Seq[\"MainSequence\"].Main[\"ID#:JifH4ODTf0y1z7bJ​ne0G7D\"]"
                         TestExec.exe c:\example.seq /goto "Seq[1].Main[4].TS.LoadOpt"
          <sequence file>:  sequence file to open
          <sequence>:       sequence to run
          <entry point>:    entry point, such as Single Pass or Test UUTs, to run
          <workspace file>: workspace file to open
       You may specify multiple sequence files, sequences, and entry points.
       Quotes are required for arguments that contain a space, such as
       "Test UUTs" and "C:\My Documents\Test Sequence.seq"
    I don't believe you'll get a return status of the executed sequence from the editor on close; but you could design your sequence to write the status to a file and then read that by your QC application.
    -Jack

  • HT2513 I have a message that I cannot eliminate. "The Anniversary calendar does not support events". I cannot find any event associated with the anniversary calendar. In fact I have deleted the anniversaries from my calendar. any ideas?y

    I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

    I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

  • IPad Air: Can't launch Safari or YouTube from the link in emails. Any idea?

    Can't launch Safari or YouTube from the link in emails. Any idea?

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • IPhone6 is not sending or receiving texts from non-Apple users, except when in Group texts. I've tried the various fixes on the main support page to no avail. Any ideas?

    iPhone6 is not sending or receiving texts from non-Apple users, except when in Group texts. I've tried the various fixes on the main support page to no avail. Any ideas?

    Have you contacted your carrier to make sure there's no issues with your account?
    ~Lyssa

  • HT201071 Any idea when Aperture will support the Sony RX10?

    I have so many RAW photos just sitting on my camera. I've downloaded them to Lightroom already as a safety precaution. Does anyone know if I transfer the RAW files from Lightroom to Aperture whether the decoded codec will work or will I have the same "cannot read" problem? Also, does anyone know when they might support the Drone Phantom II camera codec?

    I've tried DNG Converter 8.4, no luck getting the RAW file accepted into Aperture.
    It is currently 18 May 2014 and there appears to be no way for Aperture 3 to read RAW files from the DJI Phantom FC200 camera.
    Come on Apple what is the hold up? The DJI Phantom Vision/Vision+ is one of the biggest selling flying cameras around.

  • I get a message that says "Safari browserversionyou are currently using does not support the community toolbar

    I get an annoying message everytime I open Safari. It reads - "Safari browser version you are currenty using does not support the commuinty toolbar" How do I get rid of this

    victoria Hamlin wrote:
    it didn't... but at least I know where to find the Library-  any other ideas?
    Instead of being installed as a standard plug-in, the Community Toolbar uses the system loader "launchd" to load the plugin on-demand whenever Safari is opened. You will need to remove three components that are installed, starting with the binary files.
    The binary file is the actual toolbar application, and is located in the /Library/InputManagers/CTLoader/ folder. Removing the entire CTLoader folder will remove the application and other files that are installed along with the toolbar. If you just care to quickly stop the toolbar from loading, doing this will be enough to keep it from loading.
    With the binary file removed, the toolbar will no longer launch; however, the system will still try to load it when Safari is opened because the system launcher instructions file is still installed. While having these instructions present will not cause a decrease in performance, removing them will prevent the system from outputting errors and warnings in the system log files.
    Removing only this instructions file is another way to stop the toolbar from loading; however, it will require either the use of the following command in the Terminal (done before removing the file) or a restart of the system after removing the file to unload the instructions from the system loader and prevent the toolbar from launching.
    sudo launchctl unload /Library/LaunchAgents/com.conduit.loader.agent.plist
    The final components to the toolbar are some resources that it uses, which are relatively benign and will become unused "orphaned" files when the other components of the toolbar are removed. These files are all located in the /Macintosh HD/Library/Application Support/ folder in a directory called Conduit. Remove this directory and the toolbar in its entirety will be removed.

  • I deleted safari off my computer. I can not access the Internet at all. Any idea how to wt it back?

    I deleted safari off my computer. I can not access the Internet at all. Any idea how to wt it back?
    The app is not found at all in my computer

    If you’ve deleted or damaged the Safari application, you don’t have a backup, and you don’t have another web browser, proceed as follows.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Copy or drag — do not type — the line below into the Terminal window:
    open /Library/Application\ Support/Apple/.SafariArchive.tar.gz
    Press return. The Archive Utility application will launch and run briefly. When it exits, enter the following line in the Terminal window the same way as above:
    sudo cp -R Downloads/.SafariArchive/Applications/Safari.app /Applications/
    Select the whole line by triple-clicking it, then copy or drag it to the Terminal window. Press return. This time you’ll be prompted for your login password, which won’t be displayed when you enter it.
    There should be no output from the above command. If that’s the case, launch Disk Utility, select the boot volume and run “Repair Permissions” (not “Repair Disk.”) This is one of the few times there’s a reason to do that.
    Next, two more commands in Terminal:
    chmod -R -N Downloads/.SafariArchive
    rm -r !$
    Those are two separate lines; press return after each one. You can then quit Terminal.
    Test Safari. If it works, you’re done. If not, you did some other damage to your system and need to reinstall.

  • I am looking for a text to speech app that supports the Books App?

    I am looking for a text to speech app that supports the Books App?

    If Settings -> General -> Accessibility -> VoiceOver does not work, then it is unlikely iBooks will do text to speach on its own in the current version.
    <http://www.apple.com/feedback>
    I know that some competing services, Kindle, Nook, etc... are restricted in doing text to speach by the book publishers.
    If this is text in a PDF (not an ebook), then maybe there is another app that can to text to speach on PDFs.
    If it is published books that are of interest, there is Audible.com <http://www.audible.com/>
    In theory it should be possible to use the Mac OS X Text to Speach facilities to convert a document into an audio file, and they sync that to the iPod Touch.  I assume there is similar text to speach utilities for Windows systems.
    I'm also guessing that there are web sites dedicated to assisting sight impaired individuals that might provide ideas for getting text to speach options for the iPod Touch.

  • I'm attempting to sync several albums from itunes to iphoto.  When select to sync all albums it copies over the previous recorded album.  I tried to sync the Albums individually and the same thing happens.  Any ideas on how to sync my albums?

    I'm attempting to sync several albums from itunes to iphoto.  When select to sync all albums it copies over the previous recorded album.  I tried to sync the Albums individually and the same thing happens.  Any ideas on how to sync my albums?

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • I have a gen 3 ipod and can't get it into disk mode.  In itunes it does not have the option and I cant figure out how to do it on the ipod touch itself.  Any ideas?

    I have a gen 3 ipod and can't get it into disk mode.  In itunes it does not have the option and I cant figure out how to do it on the ipod touch itself.  Any ideas?

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • " plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

    Hi,
    Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
    Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
    Thanks,
    Shyam

    Hi Linc,
    Thank you for your response. Here is the screenshot of the warning that I am talking about.
    Here is what I do:
    1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
    2. Click Security Tab and click Manage WebSite Settings
    3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
    4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
    I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
    Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
    Thanks again,
    Shyam

Maybe you are looking for