Support with Windows 10 and Poker Software

Hi, I am a poker player and have recently upgraded to windows 10 - my poker software has worked perfectly for years. Last night i finally managed to upgrade to windows 10. Once the upgrade was finished,however, i am now unable to log into my poker software. This screenshot displays the issue http://prntscr.com/7zfs5o The log in screen usually has a place to log in but in this instance it is completely grey and has no writing? Also, I have found that my scrolling pad does not work, and that the option is unticked in my settings. This is annoying as whenever i restart my computer, I have to also reselect this option My computer is a HP Pavilion Notebook - 17-f107na and was previously running windows 8 I have trouble shooted the software on the HP website, and havent found any issues Please help!

I've also updated my BIOS and still no luck - anyone?

Similar Messages

When I restart my computer and hold the option key after creating a bootable usb with windows 7 and partitioning only the original partition shows up. Not the windows one or the bootable usb.

     Okay so first things first this isn't the newest macbook pro. When I open about my mac and go to system report it says it is a Macbook Pro 3,1 and the Boot Rom Version say MBP31.0070.B07. Originally when starting up Boot Camp Assistant there where only two options, the "create windows 7 bootable usb" was not there at all. So after some editing and helpful tutorials I was able to get the option show up and created a bootable usb with windows 7 and downloaded the support software onto a separate flash drive. Finally I did the last step and created a second partition for windows. Once the process is complete my computer automatically restarts.
     This is where the problem is. Once my computer makes the booting up sound it doesn't load up windows it gets stuck on a apple logo as if it's trying to reastart normally and can't. So I shut down and this time I hold down the option key during start up. It brings up the main partition and some recovery thing but no windows partiton and no bootable usb.
     I forgot to mention that I am running OS X 10.9.3. Okay any body want to help me out? Iv'e been at this for hours and can't get an inch closer to having windows. Please and thank you!
P.S. If I missed a discussion that answer my question just point me to it. Iv'e been looking for a while, but who knows i might have missed one.

The only known way to make it work on an external drive is by first installing Windows onto an internal drive, then cloning the install to an external Thunderbolt drive. Thunderbolt is seen as an extension of the internal bus, so Windows doesn't see it as an external device.

Hotsync problem with Windows 7 and Outlook 2007

Hello,
I try to make contact between my Palm Tungsten E2 and outlook 2007 on my laptop with Windows 7 for synchronizing.Before this, I worked on this laptop with Windows Vista and also Outlook 2007.I installed the standard software and after that the update for outlook 2007 (palmoutlook2007conduits.zip (7.2MB)).In Vista this was working well, but not in Windows 7.I can see in the soft ware part that palmoutlook2007conduits is installed, but the in the log book I still have the same errors :
- Not Synchronized
Outlook Contacts synchronization failed
When I go to the settings, also there is the same error : “This version of Outlook is not supported by the Outlook Conduit application. Supported outlook versions are Outlook 98, 200, XP(2002) and 2003.”. It looks like the upgrade with palmoutlook2007conduits have no effect in Windows 7.
I hope someone have a solutions for this problem.
Post relates to: Tungsten E2
Post relates to: Tungsten E2

My new computer came with Windows 7 64-bit, and I need to HotSync my Tungsten E2 with Outlook 2007. Did anyone find a way to do this?

Problems with youtube in firefox with windows 8 and 8.1

Lately i sell some computers with windows 8, and windows 8.1, so they are fresh install. and i have problems with the videos under youtube, but just with firefox, with chrome works ok, with internet explorer the same, no problem. The problem when i'm using the pluging of flash, is the next:
start the reproduction of the video with the default resolution in my case of 360, but after of a few seconds, 6 or 7, the reproduction jump to the lower resolution available (240 by example), and after other few seconds, do the same jump to a lower resolution, few seconds againd and jump to higher resolutions available, maybe 480, and so until try with every resolution available in the video and after of that show the next message:
"Se ha producido un error, vuelve a intentarlo mas tarde"
The messaage is in spanish because i'm using spanish versions to sell, well, just say that a error arised and try later.
well i think maybe problems with the pluging of flash, i will try with the html5 support, then i enable the html5 support in youtube.
And still with problems but a little different the video start with the default resolution (360), and after a few seconds maybe 3 or 4, the video stop, maybe 1 second and later continue by other 2 or 3 seconds of video and stop again other second, and continue on this way until the end of the video.
I dont have problems with the network, i can see the videows without problems with other computers in the same network, or with mobile devices, but the problem is just with firefox.
Isnt virus, because the installation is clean, i dont have extra software because the first times i think that would be by a extra software, then just clean installation of windows 8 and 8.1 and firefox, the problem i try versions since the 29 until now that the latest is the 33, the same problem, exactly in the same way, and doesn't help of nothing update the drivers of the motherboard or even install every update of windows.
Procesador Intel(R) Pentium(R) CPU G2030 @ 3.00GHz
motherboard gigabyte GA-H61M-DS2
MEMORY 4gb RAM DDR·3
Hard disk 500GB Seagate.
with this same configuration i dont have problem if i have installed windows 7.
I guess isnt a problem of hardware, because the other browsers can display the videos without any problem.
- the latest version of mozilla firefox in every time.
- I try every thing, clear cache, disable acceleration, update drivers, update windows, uninstall and reinstall, even format the machine again.
I see other posts of people with similar problems, but without 1 good answer, just a lot of general solutions that doesnt work.
i must confese that i dont test yet with other hardware and same software.
I hope someone can help me.
No big problem for me, because i dont use these computers, but i like use firefox, and if i had that problem in my computer i would be crazy trying to find a fix to the problem.

The data of my firefox is this one, dont know if this can be of utility, in this moment i install the addblock, but the problem was since the installation was clean. then this doesnt affect in the result.
Thank's
"application": {
"name": "Firefox",
"version": "33.0",
"userAgent": "Mozilla/5.0 (Windows NT 6.3; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0",
"supportURL": "https://support.mozilla.org/1/firefox/33.0/WINNT/es-MX/",
"numTotalWindows": 1,
"numRemoteWindows": 0
"crashes": {
"submitted": [],
"pending": 0
"modifiedPreferences": {
"browser.cache.disk.capacity": 358400,
"browser.cache.disk.smart_size.first_run": false,
"browser.cache.frecency_experiment": 3,
"browser.places.smartBookmarksVersion": 7,
"browser.sessionstore.upgradeBackup.latestBuildID": "20141011015303",
"browser.startup.homepage_override.mstone": "33.0",
"browser.startup.homepage": "about:home",
"browser.startup.homepage_override.buildID": "20141011015303",
"extensions.lastAppVersion": "33.0",
"gfx.direct3d.last_used_feature_level_idx": 0,
"media.gmp-gmpopenh264.lastUpdate": 1413506428,
"media.gmp-gmpopenh264.version": "1.1",
"media.gmp-manager.lastCheck": 1413975157,
"network.cookie.prefsMigrated": true,
"places.history.expiration.transient_current_max_pages": 99545,
"plugin.disable_full_page_plugin_for_types": "application/pdf",
"plugin.importedState": true,
"privacy.sanitize.timeSpan": 0,
"privacy.sanitize.migrateFx3Prefs": true
"lockedPreferences": {},
"graphics": {
"numTotalWindows": 1,
"numAcceleratedWindows": 1,
"windowLayerManagerType": "Direct3D 11",
"windowLayerManagerRemote": true,
"adapterDescription": "Intel(R) HD Graphics",
"adapterVendorID": "0x8086",
"adapterDeviceID": "0x0152",
"adapterRAM": "Unknown",
"adapterDrivers": "igdumdim64 igd10iumd64 igd10iumd64 igdumdim32 igd10iumd32 igd10iumd32",
"driverVersion": "10.18.10.3621",
"driverDate": "5-16-2014",
"adapterDescription2": "",
"adapterVendorID2": "",
"adapterDeviceID2": "",
"adapterRAM2": "",
"adapterDrivers2": "",
"driverVersion2": "",
"driverDate2": "",
"isGPU2Active": false,
"direct2DEnabled": true,
"directWriteEnabled": true,
"directWriteVersion": "6.3.9600.17111",
"webglRenderer": "Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)",
"info": {
"AzureCanvasBackend": "direct2d",
"AzureSkiaAccelerated": 0,
"AzureFallbackCanvasBackend": "cairo",
"AzureContentBackend": "direct2d"
"javaScript": {
"incrementalGCEnabled": true
"accessibility": {
"isActive": false,
"forceDisabled": 0
"libraryVersions": {
"NSPR": {
"minVersion": "4.10.7",
"version": "4.10.7"
"NSS": {
"minVersion": "3.17.1 Basic ECC",
"version": "3.17.1 Basic ECC"
"NSSUTIL": {
"minVersion": "3.17.1",
"version": "3.17.1"
"NSSSSL": {
"minVersion": "3.17.1 Basic ECC",
"version": "3.17.1 Basic ECC"
"NSSSMIME": {
"minVersion": "3.17.1 Basic ECC",
"version": "3.17.1 Basic ECC"
"userJS": {
"exists": false
"extensions": [
"name": "Adblock Edge",
"version": "2.1.5",
"isActive": true,
"id": "{fe272bd1-5f76-4ea4-8501-a05d35d823fc}"
"experiments": []
}

PCMCIA-GPIB support for Windows 7 and 8

I understand the PCMCIA-GPIB adapters are legacy devices, however, for some of us who still have these adapters and platforms with Windows 7 or 8 on them, it would be very useful to see a supported release of NI488.2. I haven't been able to get any version of the software to work yet (I'm running Windows 7 Professional 64-bit) with this adapter. If anyone has a workaround available, without having to install XP or using a virtual environment, please share. If NI still sells this product, then it would seem appropriate that it should be fully supported.
Current use: Data collection via Agilent IC-CAP, Silvaco UTMOST IV, and MATLAB from parameter analyzers, LCR meters, and network analyzers for on-wafer probing.

Too bad.
It looks like they dropped support for the PCMCIA-GPIB completely with Windows 7.
The ironic thing is that they still sell this card. I would bet most people don't know that it isn't supported with Windows 7.
I wouldn't have know if I hadn't read your post.
Very bad of NI.

Problems with windows update and fingerprint

HI
My windows was out of date and in the coarse of trying to update it, the system runned into a problem and the only way i could get back my information was to let the system settings go back to its default settings. Following that, i find it difficult to download new updates and the fingerprint is also not working any more. Please what should i do ?

Hi @CLEPRIS ,
Thank you for visiting the HP Support Forums and Welcome.It is a great site for information and questions. I have looked into your issue about your HP-ENVY m6 Notebook and issues with Windows Updates and the Fingerprint reader software. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers that might need updating on your system.
It shows me that there seems to be interference with Software task, usually your virus protection.
You might have to disable this software and then run the Windows update.
I would suggest to uninstall HP SimplePass and reinstalled the latest version for Windows 8.1.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
I hope this fixes things up for you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I can connect the laptops to the printer. Any advise?

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I am not able to connect the laptops to the printer. Any advise?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Hello i have purched new computer with windows 8 and cannot sync with my ipod nano

hello I have a new computer with windows 8 and itunes works perfectly however it will not sync with either of our ipods.

Hey azduck,
Thanks for the question. I understand you are having issues syncing your iPod nano with iTunes for Windows. The following articles may help to resolve your issue, based on your symptoms:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Additionally, you may find the following article helpful:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Thanks,
Matt M.

CD/DVD drive it's not supported by Windows XP and Bios

I've bought a new cd/dvd drive Mat****a Panasonic.
It only work on Windows 2000, it's not supported by Windows XP and Bios, so i can't boot with.

Could you please provide some information (name) about you notebook?
Did you bought this drive or was this drive delivered with the notebook?
If the drive cannot berecognised by BIOS then in my opinion the drive supports wrong master / slave / c-sel settings.
You should know that not all drives are compatible.
The settings cannot be changed because the drive dose not supports any jumpers but only the firmware.

Sync contacts fails since switch to new pc with Windows 7 and live mail

Since switch to new pc with Windows 7 and live mail synchronisation of contacts fails. On old pc with Vista and Outlook Express there were no problems.

Well, I guess I have to download some other software to make my apple product work. Really great stuff you guys sell. I will never buy another apple product. My Iphone, Ipod and Itunes are junk

On my home PC, I operate with Windows XP and use Outlook Express for my email. Can my Outlook Express address book be imported by my IPhone4

On my home PC, I operate with Windows XP and use Outlet Express for my email. Can my Outlook Express address list be imported to my IPhone4

Not directly; OE is not supported by iTunes. You need full Outlook. Address Book in later versions of Windows is supported.

Reader X integration with Windows Explorer and protected mode

Hello all.
I'm having some problems with Adobe Reader X under Windows 7 and it seems that I need to disable protected mode. I disabled it by unchecking the related option in edit-preferences, also I created the registry key for the local user (bProtectedMode = 0).
After doing that, the protected mode seems to be disables when I open pdf documents with Reader X, but it's still enabled when previewing documents thumbnails in windows explorer. The issue is that when I open a folder containing pdf files and left click or right click them, two AcroRd32.exe processes spawn and it seems to me that it's a protected mode behaviour (broker process + sandboxed renderer process).
I'd like to know if it's possible to fully disable protected mode so that it remains disabled even when I'm navigating directories with Windows Explorer and documents are previewed. My current Adobe Reader version is 10.1.3.
Thank you very much.

Hi Fernando,
Here's a statement that hopefully helps or at least solves your mystery:
While Protected Mode can be disabled for PDFs viewed with the product, Adobe continues to protect you when 3rd party software invokes a Reader process; that is, Protected Mode sandboxing cannot be disabled for shell extensions. For example, when you use Windows Explorer to preview a PDF in the Preview Pane, it starts a Reader process to display the preview. In such cases, Task Manager shows that two AcroRd32.exe processes spawn and that the operation is occurring with Protected Mode enabled.
Ben

Ive got a new pc with windows 7 and my ipod touch 4th gen is synced with my old pc ,how can i back up the photos on the ipod to my new pc ?

ive got a new pc with windows 7 and my ipod touch 4th gen is synced with my old pc ,how can i back up the photos and music on the ipod to my new pc ?

Your iPod can only be synced with one computer at a time. If you try to sync it with a new computer/iTunes library, it will replace the contents of the iPod with whatever is in the new library. You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabling the prevent iPods,iPhones, and iPads from automatically syncing option.
Before doing anything else, authorize the new computer with your iTunes Account. In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials. Either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync.
Then right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
iOS: How to back up
Now onto synced content such as music, videos, photos, etc. For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases. For all other nonpurchased iTunes content such as music, videos, and photos synced to the device, see this older post from another forum member Zevoneer covering different software available to assist you with this task.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier. Here is more on backing up and restoring your iPod.
iTunes: Backing up, updating, and restoring iOS software
If you do happen to lose any purchased content, you can always redownload it from the iTunes Store again at no cost via iCloud. See this article for information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
B-rock

Using Dell Latitude D630 with Windows 7 and Adobe CS6 - PCMCIA hardware accelerators?

I have a separate thread going using the hardware accelleration that comes with the Intel Mobile 965 Express Chipset not working
for me, and trying to figure out how to get OpenGL and 3d features of Photoshop CS6 to work.
So, I was thinking maybe a work-around. Are there supported PCMCIA card graphics accelerators that anyone could recommend
that would work with Windows 7 and interface via PCMCIA that meet the requirements to be used with Adobe CS6?

A Dell Latitude 630 isn't enough machine to do what you want to do, I owned one. Geerks.com had a great laptop today for 379.

Support with Windows 10 and Poker Software

Similar Messages

Maybe you are looking for