SUPPORTAL and SUPPORTALCONT for SRM 7.0 EHP1

Dear All,
We upgraded a SAP SRM Server 5.5 instance to 7.0 EHP1 and we added Portal Usage to the Java stack.
In the very long list of Java Components, there is SAP PORTAL in version 2.0
Do i have to update it to the last version available
What about SAPPORTALCONT ?
Do i have to install it (not installed) ?
Many thanks in advance for your help
Regards
François LECOMTE

It is BP SRM 7.01

Similar Messages

WHERE IS CREATIVE SUPPORT AND FIRMWARE FOR THEIR PRODUCTS???????

@WHERE IS CREATIVE SUPPORT AND FIRMWARE FOR THEIR PRODUCTS??I swear I can't believe Creative is getting away with what they are doing. I can't tell you the amount of people that are infuriated with this company. Creative seems to be more concerned with releasing a hundred versions of the same type of mp3 player instead of supporting the mp3 players they've already released. I have owned multiple Creative products including soundcards and mp3 players. The lastest one- the Creative X-FI(with wireless lan) is one of the glitchiest players I've ever owned yet their last firmware update was 2 years ago- 2 YEARS!!
!!! I've had it with this ridiculous company. They would be the envy of Apple if they could only get their customer support together instead they'd much rather watch their customer base slowly evaporate.
Dave

I TOTALLY agree. Not only does their product support blow, so does their customer support. I can't find anywhere to contact these people regarding my warranty return status. I have typed the RMA info in for 3 days now and all I receive is an internal error! WTF :angry:
The contact us link is just another link back the same options on the page. SO "contact us" really means "Good luck clicking around in a circle until you give up." I really hope that they send me my product back, lord knows I can't track its status anymore.
This will be the LAST thing I ever purchase from Creative until I've heared that they have gotten their act together.

Business Package for SRM 7.0 EHP1

Dear `SRM Gurus,
What is which SRM business package version required for SRM 7.0 EHP1
Reagrds,
Vinod

It is BP SRM 7.01

BPM and Workflow for SRM 7

Hi
Does anyone know if BPM (Business Process Management) supports SRM and specifically SRM 7.0?
Is it possible to create the workflow in BPM and then transfer it to SRM 7? Will that work flow be a "developed" workflow from SRM point of view?
Sincerely
Anders

Hi,
In that case, I would use BPM for MDM and SRM workflow for SRM document approval.
For SRM ESOA, please visit ES Workplace.
http://www.sdn.sap.com/irj/sdn/esworkplace
http://esoadocu.sap.com/socoview/render.asp?packageid=DE4157EA06BD7BF1A3C7001A64D3F462&id=9E7765056D1C49FF9F433B406D1C70DD
Regards,
Masa

Advantages and disadvantages for SRM on one client with ECC

Dear SAP gurus,
We are evaluating the use of SRM on one client with ECC. Is there a paper spesifally discuss the advantage and disadvantages of having this deployment option?
Best regards,
John

Hi
check this link
SRM Server as an Add on to ERP 2005
Advantages
1) one backend for SRM and ECC6.0
Disadvantage
1.Sourcing scenario cannot be implemented.
2.It does not support multiple backend system.
Regards
G.Ganesh Kumar

I contacted the itunes store support and asked for an explanation of a refund and then my first name (for the account data) was not accepted - though correct - only when cancelling the second name it went through. How can that be???

Hello - I wonder what can have happened. I got a mail from the itunes store with the info of a refund for an App that I cannot have purchased. Then I asked for help via the support and had to fill out a form with data. My account name (first name and last name) was already there and when I finally wanted to submit my request for support it said that my first name ( there are 2 for that) was not correct. I had the idea of cancelling the 2nd 'first name = only M. and then the request was accepted.
What might be the reason for all that turmoil? I mean the refund for s.th. that I did not buy and then the non acceptance of my first name's data?
I appreciate a comment, aimeeh

Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away.

My Office for Mac keeps getting "Error Reporting" and I find it very hard to open without it closing and "Error Report" I even went through Microsoft support and look for the plist file and keep it on my desktop which solves the problem temporarily.

Process:         Microsoft Error Reporting [275]
Path:            /Library/Application Support/Microsoft/*/Microsoft Error Reporting.app/Contents/MacOS/Microsoft Error Reporting
Identifier:      com.microsoft.error_reporting
Version:         2.2.7 (2.2.7)
Build Info:      Unknown-110707~0
Code Type:       X86 (Native)
Parent Process: launchd [112]
Date/Time:       2012-01-09 23:50:57.914 +0800
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          27616 sec
Crashes Since Last Report:           6
Per-App Interval Since Last Report: 394 sec
Per-App Crashes Since Last Report:   4
Anonymous UUID:                      C05EBED5-CDE0-4A98-9B3B-BD69496D018F
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
VM Regions Near 0:
--> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL /Library/Application Support/Microsoft/*/Microsoft Error Reporting.app/Contents/MacOS/Microsoft Error Reporting
    __TEXT                 0000000000001000-0000000000062000 [ 388K] r-x/rwx SM=COW /Library/Application Support/Microsoft/*/Microsoft Error Reporting.app/Contents/MacOS/Microsoft Error Reporting
Application Specific Information:
objc[275]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib                  0x90b85f29 mig_strncpy + 27
1   com.apple.framework.IOKit               0x92c9a269 io_registry_entry_from_path + 123
2   com.apple.framework.IOKit               0x92c46c99 IOServiceGetMatchingServices + 51
3   com.apple.MultitouchSupport.framework          0x956379ed _mthid_copyAvailableDevicesInfo + 268
4   com.apple.HIToolbox                     0x99bd68c6 TISHardwareSupportsGestureHandwriting + 47
5   com.apple.HIToolbox                     0x99bd66c2 SyncHandwritingHotKey + 20
6   com.apple.HIToolbox                     0x99bd5840 _FirstEventTime + 1474
7   com.apple.HIToolbox                     0x99bcd95f RunCurrentEventLoopInMode + 30
8   com.apple.HIToolbox                     0x99bd4cc6 ReceiveNextEventCommon + 168
9   com.apple.HIToolbox                     0x99bd4c0a BlockUntilNextEventMatchingListInMode + 88
10 com.apple.AppKit                        0x95661040 _DPSNextEvent + 678
11 com.apple.AppKit                        0x956608ab -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113
12 com.apple.AppKit                        0x9565cc22 -[NSApplication run] + 911
13 com.apple.AppKit                        0x958f118a NSApplicationMain + 1054
14 com.microsoft.error_reporting           0x000039d9 0x1000 + 10713
15 com.microsoft.error_reporting           0x000033de 0x1000 + 9182
16 com.microsoft.error_reporting           0x00003305 0x1000 + 8965
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib                  0x90b8890a kevent + 10
1   libdispatch.dylib                       0x9563fc58 _dispatch_mgr_invoke + 969
2   libdispatch.dylib                       0x9563e6a7 _dispatch_mgr_thread + 53
Thread 2:
0   libsystem_kernel.dylib                  0x90b8802e __workq_kernreturn + 10
1   libsystem_c.dylib                       0x9b79cccf _pthread_wqthread + 773
2   libsystem_c.dylib                       0x9b79e6fe start_wqthread + 30
Thread 3:
0   libsystem_kernel.dylib                  0x90b8802e __workq_kernreturn + 10
1   libsystem_c.dylib                       0x9b79cccf _pthread_wqthread + 773
2   libsystem_c.dylib                       0x9b79e6fe start_wqthread + 30
Thread 4:
0   libsystem_kernel.dylib                  0x90b8802e __workq_kernreturn + 10
1   libsystem_c.dylib                       0x9b79cccf _pthread_wqthread + 773
2   libsystem_c.dylib                       0x9b79e6fe start_wqthread + 30
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000001 ebx: 0x00000001 ecx: 0x00000200 edx: 0x00000000
edi: 0x00000000 esi: 0x92c42236 ebp: 0xbffff204 esp: 0xbffff1f8
   ss: 0x00000023 efl: 0x00010283 eip: 0x90b85f29   cs: 0x0000001b
   ds: 0x00000023   es: 0x00000023   fs: 0x00000000   gs: 0x0000000f
cr2: 0x00000000
Logical CPU: 2

Hi croatia2014,
Thanks for visiting Apple Support Communities.
If you have photos in your Photo Stream that you want to save to your iPad, you can save them to your Camera Roll using this method:
Manage My Photo Stream contents. In the My Photo Stream album, tap Select.
Share, print, copy, or save photos to your Camera Roll album: Select the photos, then tap .
You can find these steps in the iOS 7 user guide here:
My Photo Stream
http://help.apple.com/iphone/7/#/iphbfeb468fc
You may also find this advice useful:
If there are any photos in My Photo Stream that you want to keep, save them to your Camera Roll, then back up your Camera Roll and other data using iCloud or iTunes.
From:
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
All the best,
Jeremy

Cookbook and materials for SRM certification

Hai,
Could anybody forward me the SRM cookbook/material for certification purpose.
My email id is [email protected]
Thanks in advance,
steve

Hello SRM Gurus ,
It would be of great help if you can send me SRM Certification details & Materials and also some cookbooks for SAP SRM Configuration.
thanks in advance , will award points for the same.
Please email me at [email protected]
thanks again.
Cheers.

Continued Support and enhancements for Toplink Essentials?

Will the support for Toplink Essentials (for JPA 1.0) continue through this forum and the issue list at Glassfish dev [1]? Will further enhancements be taken up on Essentials? Or will all further improvements happen only on EclipseLink?
[1] https://glassfish.dev.java.net/issues/

Oracle AS/TopLink included TopLink Essentials within our 10.1.3.1 and later releases and offer full support to licensed customers. This means that for the full lifecycle of the 10.1.3 stream we will continue to support customers using TopLink Essentials and if needed fix any critical bugs.
Going forward all future feature and enhancement work is being done in EclipseLink as it is replacing TopLink Essentials in both the Oracle stack as well as in GlassFish V3. We encourage you to upgrade to EclipseLink when it makes sense for you and any enhancements you wanted to see in TopLink Essentials be requested against EclipseLink.
Doug

Support and Documentation for Events in FlashPro CS6

What events does FlashPro CS6 support?
I'm only seeing events triggered from documentAfterSave and documentAfterActivate.
                              CSInterface.instance.addEventListener("documentAfterSave", eventHandler);
                              CSInterface.instance.addEventListener("documentAfterActivate", eventHandler);
Anyone sucessful with any others? Any documentation?
I was hoping to find the standard events including:
                              CSInterface.instance.addEventListener("documentAfterDeactivate", eventHandler);
                              CSInterface.instance.addEventListener("applicationActivate", eventHandler);
Working to get events working in all the CS6 apps...
- Mark

One thing to try is to choose the "javadoc" option from the "run" menu when you are standing on the project with the UML diagrams - this will create HTML files with the diagrams in them.
The other thing you can do is right click on the diagram and select publish...

Prerequities for SRM 7.0

Hi
SDN,
I want to know what are the Prerequities for SRM 7.0 ?
how it will integrate with SAP R/3 ?
Do we really require XI, MDM, BI and EP for SRM , if so for what pupose ?
how long Period it take to implement SRM 7.0 in organization ?
Regards,
amit kushwaha

Hi,
how it will integrate with SAP R/3 ?
Intergation with R/3 depends on the Scenario what the client is using.
Do we really require XI, MDM, BI and EP for SRM , if so for what pupose ?
All the SAP modules are required - MDM is a must in SRM 7.0 - It is the main components for Self service procurement -Master Data Management .
BI -Business Information ware house for all the SRM report you will get in the BI only
EP -Enterprise Portal is the Front end for all the SRM users (web based applications)
how long Period it take to implement SRM 7.0 in organization ?
It may take 10 months to 12 months
Regards
Ganesh

RoboHelp Support and Upgrades Continued

I work for a large gov't agency whose IT group has informed
us that Robohelp will not be providing continued support and
upgrades for the product RoboHelp...is this correct????? p.s. as a
result I am being informed that staff should discontinue use of
product..........if this is not true you may want to provide
clarification.

easirider,
According to this thread from early July:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=447&threadid=1167119&en terthread=y
RoboHelp is apparently alive and well. Check it out and tell
your bosses not to jump ship just yet. Also, I called Adobe Support
after being told by a third party software vendor that maintenance
contracts were NOT available. They were wrong too - the Adobe rep
was more than happy to renew my contract (or set up a new one) with
a credit card or a P.O.
Jim

EP not mandatory for SRM 7.01?

Hi all,
i'm wondering because someone told me, that the portal won't be mandatory for SRM 7.0 EHP1. Is it right?
Regards,
Danilo

Hi,
Portal-Independant Navigation Frame (Without Portal, with NetWeaver Business Client HTML) is available from SRM 7.0 SP06.
Regards,
Masa

SRM 7.0 EHP1 - new functions for BRF workflows

Hi all,
We currently upgraded our SRM 5.0 system to SRM 7.0.
We need some inputs whether to activate the EHP1 for SRM 7.0
Are there any limitations in terms of BRF workflows which are now covered in SRM 7.0 EHP1?
In SRM 5.0,we were using n step header level approval workflow using the BADI and custom tables for approval determination.
We need to map the same in SRM 7.0 now but wanted to know the limitations in terms of any new functionalituies which can be used in terms of Shoppign cart workflow in SRM 7 EHP1 v/s SRM 7.0 SP10.
I read in one of the posts in the forum that parallel processing for BRF workflows is not supported in SRM 7.0 EHP1.Please advise.
Please advise.

Thanks Saravanan.
We are having lot of issues with the ACW in SRM 5.0 and hence plan to reimplement the workflow in SRM 7.0 using the process controlled workflows plus the new features introduced for workflow.
Can you please advise if ACW are better than PCW or vice-versa??
I dnt have the link for the post but cans someone confirm if parallel processing is supported in SRM 7.0 EHP1 workflows??
Are there any shortcomings in terms of the BRF workflows in SRM 7.0 EHP1?

SRM and MDM for material master in SRM contracts for multiple R/3

Dear all,
my question is:
We are implementing SRM 4.0 in classic scenario with multiple R/3 back-end and we want to set-up Global Outline Agreements in SRM in a multi-backend environment where the Material Master are not harmonized.
We heard that MDM and COntent Integraton can be a solution.
Then detailled question is:
Can we have 2 material numbers (e.g. ABC and XYZ) in 2 different R/3 systems refering the same product.
Have the mapping done in MDM (Content Integrator?) to a third material number:123
Replicating the material master 123 to SRM from MDM(?)
Create global Outline Agreements in SRM for Material Master 123.
Distribute the GOA as Outline Agreement to R/3 system 1 with the translation to ABC and to R/3 system 2 with the translation XYZ, all of that during the distribution step (or another).
Have the call-offs quantities correct on 123 in SRM and BW?
IF yes, how is it working, do you have some documentation discribing the scenario and the config steps to do?
Thanks in avance

Hello RD,
That's a good question.
You are on the right way. MDM is the tool for you.
But..
Content Integrator (CI) was first developped for Shell, to address the need of cross-referencing of material/supplier/category IDs, for:
- reporting purpose (actual Spend Analysis)
- mapping purpose (send of XML PO)
CI was later "fusionned" into the new MDM (1.0) solution.
So now, you can not order CI without MDM (even if some SRM slides still present CI).
But mapping API where developped for all inboud/outbound interfaces in SRM, for materials only (good luck for you).
You will find everywhere this piece of code:
Call ECI
    CALL FUNCTION 'BBP_PRODUCT_MAP'
      TABLES
        it_input          = lt_mapping_in
        et_output         = lt_mapping_out
      EXCEPTIONS
        logsys_not_found = 1
        driver_not_found = 2
        product_not_found = 3
        internal_error    = 4
        OTHERS            = 5.
So it is ok, you have the mapping call, but I don't know if all the rest of the process was really "finalized" (call of API mapping in CI, via XI). I personnaly never used it, but I assume it should work.
I my opinion your process is supported by SAP:
- Extract materials from both R/3 and consolidate them as a single product in MDM.
- Distribute this product into SRM.
- Maintain contracts on those products.
- Distribute them to R/3 (The ECI call is also used during contract distribution).
- Call offs corrects in SRM and BW
For MDM documentation, look at netweaver area of service.sap.com.
For MDM/SRM integration, look at SRM 4.0 spend analysis:
https://websmp206.sap-ag.de/~sapdownload/011000358700004424262004E/GlobalSpendOverview.ppt
For SRM contract distribution, call-offs, BW, look at SRM in details in service.sap.com/srm/SRM4.0:
https://websmp206.sap-ag.de/~sapdownload/011000358700001966382004E/contracten.ppt
For SRM5.0, see online help on help.sap.com.
Rgds
Christophe

SUPPORTAL and SUPPORTALCONT for SRM 7.0 EHP1

Similar Messages

Maybe you are looking for