Supported Drives for iDVD

I see that one "must" have a superdrive to use iDVD but I have also seen "no superdrive" patches and wonder if that will help me use iDVD.
I just installed an internal NEC-3540a dvd burner into my Digital Audio G4 and would like to incorporate idvd into my imovie workflow. Previously I could only make VCD's.
Is there any way to use idvd with my new dvd burner? If not, do I have to export my imovies in DV format and then burn from that file? Also, any suggestions as far as software (if iDVD is not possible to use) to make multi-film DVDs? My videos are typically 2-4 minutes in length.
Thanks!
Eric

Eric,
You have "old iron" for running iDVD 5... My brother is running it on a G4 450 DP and it runs, but slowly.
Patchburn should help Panther see the drive: http://www.patchburn.de/index.html
b iLife 05 System Requirements
Macintosh computer with a PowerPC G3 (400MHz or faster), G4, or G5 processor
600MHz G3 or faster required for GarageBand
G4 or G5 required for GarageBand software instruments and advanced photo editing in iPhoto 5
b 733MHz G4 or faster required for iDVD
b 1GHz G4 or faster required to use HD features of iMovie HD
256MB of physical RAM (512MB recommended)
512MB RAM required to use HD features of iMovie HD
b Mac OS X v10.3.4 or later
Mac OS X v10.3.6 or later required to use HD features of iMovie HD
Mac OS X v10.3.6 or later required to work with RAW photos (iPhoto 5)
Display with at least 1024 x 768 pixel resolution
QuickTime 6.5.2 (included)
DVD drive required to install GarageBand and iDVD
Apple SuperDrive (or 733MHz G4 processor) required for iDVD
RAW requires a supported RAW-compatible camera:
http://www.apple.com/ilife/iphoto/import.html
Compatible SuperDrive required to burn DVDs:
http://docs.info.apple.com/article.html?artnum=300665
4.3GB of disk space required to install GarageBand, iTunes, iPhoto, iMovie and iDVD; or 250MB to install iTunes, iPhoto and iMovie only
iPhoto books and prints are available in the US, Canada, Japan, and select European countries

Similar Messages

HT4407 i can't download windows support driver for my Macbook Pro 13" end 2011

Everytime i tried to download Windows support software from Boot Camp Assistant, i got an error message like "Can't install Windows support Software because you are not connected to the internet". Can someone help me please !!!!

Check your Network control panel and turn off Auto-Proxy setting.
This is one of the top #4 "how can they do this' pet-peeve errors.
The other is the often slow 8 hrs to download 600MB even on 10Mb+ cable.
Another, 'the drive cannot be partitioned because there isn't enough contiguous unfragemented free space; some files are locked and cannot be moved."
If auto proxy isn't it, router/modem and DNS settings.

What is the correct boot camp support driver for late 2009 Macbook for windows 8.1

I have late 2009 Macbook with OS X 10.9.4. I want to run boot camp for windows 8.1, but unable to due to the fact that it can only run Windows 7. What is the correct Boot Camp Support Software so that I can run Windows 8.1?

Thanks for the info, but unfortunately there is no current support software or update for my issue at this time. I found the information under Boot Camp: System requirements for Microsoft Windows operating system. Hopefully Apple will fix this issue promptly!

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

MP navigator ex the scanner driver for this device is not supported for my itunes/ ipod

Mp navigator ex driver for this device not supported when I plug in my ipod I have windows vista

Hello there K_McCreedy,
I saw your post about the scanning issues you have been having with your PS B110a and Mavericks. I have looked into this for you and I would like to offer some suggestions.
First of all, there is no downloadable full feature driver and software (scanning software included) for this model of printer and Mavericks. There are some work around options however, that I will link you to below!
Please follow these steps:
1. Mac OS X: How to reset the printing system
2. Repair disk permissions
3. OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
(See under link #3 for the different methods of scanning options with Mavericks under the FAQ's section)
I hope I helped answer your question!
Thanks for posting in the community and have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Where can I find a driver for the SM bus? It is not available thru HP support.

I have a Compaq Presario V5120NR notebook. My operating system crashed and was not recoverable. I ourchased a copy of Windows XP Home Edition and installed it. This is the same operating system that came on the notebook. I downloaded all drivers available thru HP support and installed them. The Device Manager still shows that I have no driver installed for the SM bus. The notebook works, but has a few "quirks", such as the screen saver comes on, but then goes off for no apparent reason. No major problems, just little annoying things like that. Any idea where I can get the driver for the SM bus would be greatly appreciated, :-)
This question was solved.
View Solution.

You're very welcome.
Normally the SMBus controller with the chipset in your notebook is installed with the graphics driver.
I figured installing the generic AMD driver might contain the SMBus controller your notebook needs.
So, you can try that, or...
I have one other suggestion. Try this driver and see if it works. You have to manually install it.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...
Download and run the file. It will extract to C:\SWSetup\sp33927.
Go to the device manager and click on the SMBus controller needing drivers.
Click on the driver tab. Click on Update Driver.
Select the manual search method and browse to the above folder.
Select the SMBUSati.inf file and see if it installs the smbus controller.
This driver is from a dc5750 desktop with an AMD chipset. Maybe that is a generic ATI controller used by a lot of PC's.

Error getting CSS support information for driver [HsvAdmDriver]

Hi all,
we have installed HFM on Win2003 x64 EE server. Everything is working correctly, but we are not able to create a connection to HFM data source in Web Analysis.
Following error occurs:
4010 Error: Error Getting CSS Support Information For Driver HsvADMDriver; Nested Exception Is: Com.Hyperion.Ap.APException:
Does anyone know how to fix this?
Regards,
Vladino

Hi Vladino,
What version of HFM are you on?
Do you have the ADM driver and HFM client installed on your Web Analysis server along with the HFM server and/or cluster being registered on the Web Analysis server?
Regards,
John A. Booth
http://www.metavero.com

Error getting CSS support information for driver [com.hyperion.ap.hsp.HspAd

Hi everybody, I have the next message:
Error getting CSS support information for driver [com.hyperion.ap.hsp.HspAdmDriver]
when I try to make a DB connection from Financial Reporting Studio in my local machine. In the server everything works fine.
EPM 11.1.2.1
Oracle 11g
Windows Server 2008
Does anyone have an idea on how to fix it?
Thanks in advance.
Israel Fuentes
[email protected]

Did you ever get this resolved? I am having the same issue. I suspect firewall.
thanks,

[SOLVED]Installing it87 driver for lm_sensors support

Hello,
I've done much research on how to properly install an update it87 driver that could make 0x8620 work.
I ran sensors-detect and ran into this:
# sensors-detect revision 6209 (2014-01-14 22:51:58 +0100)
# System: Gigabyte Technology Co., Ltd. Z97X-Gaming 7
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... Yes
Found unknown chip with ID 0x8620
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): y
# DMI data unavailable, please consider installing dmidecode 2.7
# or later for better results.
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Found unknown SMBus adapter 8086:8ca2 at 0000:00:1f.3.
Sorry, no supported PCI bus adapters found.
Module i2c-dev loaded successfully.
Next adapter: i915 gmbus ssc (i2c-0)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus vga (i2c-1)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus panel (i2c-2)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpc (i2c-3)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpb (i2c-4)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpd (i2c-5)
Do you want to scan it? (yes/NO/selectively): y
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Do you want to overwrite /etc/conf.d/lm_sensors? (YES/no):
Created symlink from /etc/systemd/system/multi-user.target.wants/lm_sensors.service to /usr/lib/systemd/system/lm_sensors.service.
Unloading i2c-dev... OK
Unloading cpuid... OK
So I did some research and found that this was updated and available as a potential driver for my MOBO:
http://www.lm-sensors.org/wiki/Devices
You will see the IT8620E which covers the unknown chip lm_sensors found.
I downloaded the file, extracted it and tried to do a
sudo make
but I ran into an error because it was looking for
KERNEL_BUILD := /usr/src/linux-headers-$(TARGET)
which is NOT in that directory. I installed the linux-headers and saw that it adds files to
/lib/modules/3.19.3-3-ARCH
. I modified the Makefile and it got past that part but it ran into another error during
make install
After much frustration I looked and saw
usr/lib/modules/3.19.3-3-ARCH/kernel/drivers/hwmon/it87.ko.gz
so now I'm questioning if I even need to install this driver or if I need to update it. Is there a way to learn more about these drivers that come in the linux package?
I can't find anything concrete on how to make this work. I'm just trying to add my fan speeds and other junk to my conky!
Edit:
modinfo it87 gave me this result:
filename: /lib/modules/3.19.3-3-ARCH/kernel/drivers/hwmon/it87.ko.gz
license: GPL
description: IT8705F/IT871xF/IT872xF hardware monitoring driver
author: Chris Gauthron, Jean Delvare <[email protected]>
depends: hwmon-vid,hwmon
intree: Y
vermagic: 3.19.3-3-ARCH SMP preempt mod_unload modversions
parm: force_id:Override the detected device ID (ushort)
parm: update_vbat:Update vbat if set else return powerup value (bool)
parm: fix_pwm_polarity:Force PWM polarity to active high (DANGEROUS) (bool)
So, this tells me that this driver does not cover 8620.
Last edited by SirMyztiq (2015-04-10 06:23:31)

Update:
I believe after some researching and actually going for it that I managed to install the it87 test driver.
I modified the Makefile on this line:
KERNEL_BUILD := /lib/modules/$(TARGET)/build
And when it failed on this line:
SYSTEM_MAP := /boot/System.map-$(TARGET)
I did:
sudo cp /proc/kallsyms /boot/System.map-`uname -r`
Because Arch doesn't put this file there because it isn't needed to boot...I think.
Either way it finished and I was able to use the lm_sensors.

IS CLIP supported by Xilinx Spartan3E driver for LabVIEW 8.6?

IS CLIP supported by Xilinx Spartan3E driver for LabVIEW 8.6?
For HDL interface node, the enable chain and multi clock domain is difficult to understand
Solved!
Go to Solution.

Reidl,
Thank you for your answer. How do I uninstall my current version? I have looked in "Add or Remove Programs," but I don't see anything under "Xilinx" or "Spartan." I do see an entry for "National Instruments Software." However, when I click "Change / Remove" I don't see any entries for the Spartan Board.
I tried running the installation program, and I received the following message:
The NI LabVIEW FPGA Support for Spartan-3E 1.1.0 installation has failed with the following error.
You have a higher version of NI LabVIEW FPGA Support for Spartan-3E in your system. You must uninstall it before installing this again.
What is the latest version number? How do I check what version I currently have?
Thanks,
James Carroll

"Error getting CSS support information for driver[HsvAdmDriver]" in HFM

Can anyone suggest a workaround for the error message:
"Error getting CSS support information for driver[HsvAdmDriver]"

For anyone else experiencing this problem, install the ADM Client on the server(s) involved and restart the services. After this, we had no more problems in HFM

Camcorder support page for Imovie and iDVD

Can someone please let me know where I can view the support page for DVD camcorders that supports iMovie and iDVD.

Click here and here for some resources.
(40433)

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

jeanfromisle-arné wrote:
I'm new to MacBook Pro.
My system is Mac OS X v.10.6.8.
I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
where do I find the exact version (in french)
For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.

Can't get super drive to play disc in dvd player it states disc not supported that for any disc inserted into the player

can't get super drive to play disc in dvd player it states disc not supported that for any disc inserted into the player

Hi, not sure it works in 10.9, but...
DVD Player doesn't like external players, use VLC Player...
http://www.videolan.org/vlc/
http://hints.macworld.com/article.php?story=20100208120847220
http://hints.macworld.com/article.php?story=20111107064435227

Sierra Wireless driver for native support for 10.5 displays wrong network

Anyone getting the wrong wireless network with the Sierra Wireless driver for native support in Leopard? Sometimes when my AT&T 881u cannot connect, the mini card starts displaying Verizon information. This only happens once every couple of weeks. AT&T says its Sierra Wireless' problem and Sierra says the issue is Apple's.
I took a picture of the issue with my iPhone. I'll post a link as soon as I get a chance to sync.
This card normally works great, but this issue is really strange since AT&T G3 network shouldn't be compatible with Verizon's EVDO.

That model is included in the hpijs and ESP ghostscript driver set:
http://www.linuxprinting.org/macosx/hpijs/
When you get that installed, come back with print server model for setup help. Since there isn't auto setup software for OS X, we need to setup all the details.

Supported Drives for iDVD

Similar Messages

Maybe you are looking for