Supported SAP Versions
Hallo
Is there an document were i could found the supported SAP Versions for Version XI 3.1?
In the supported platforms document i could not find something (https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000726096&_SCENARIO=01100035870000000202).
Is for example SAP Rel. 4.6.c supported?
hi,
you can go to http://service.sap.com/bosap-support and take a look at the supported platforms per product. In your case the product is the SAP Integration Kit.
Ingo
Similar Messages
-
Version of Internet explorer supports SAP CRM 7
Hi:
Somebody knows what is the SAP note that explains which version of explorer supports SAP CRM 7?
Thanks in advanceHi,
According to the Product Availability Matrix which you can look up for CRM 7.0 at service.sap.com/pam the following versions of Internet Explorer are currently supported:
INTERNET EXPLORER 6.0 WIN 2000 PROF.
INTERNET EXPLORER 6.0 WIN XP 2002 PROF. 32-BIT
INTERNET EXPLORER 7.0 WIN VISTA 32-BIT
INTERNET EXPLORER 7.0 WIN XP 2002 PROF. 32-BIT
INTERNET EXPLORER 7.0 WIN XP 2002 PROF. 64-BIT
INTERNET EXPLORER 8.0 WIN 7 32-BIT
INTERNET EXPLORER 8.0 WIN 7 64-BIT
INTERNET EXPLORER 8.0 WIN VISTA 32-BIT
INTERNET EXPLORER 8.0 WIN VISTA 64-BIT
INTERNET EXPLORER 8.0 WIN XP 2002 HOME 32-BIT
INTERNET EXPLORER 8.0 WIN XP 2002 PROF. 32-BIT
INTERNET EXPLORER 8.0 WIN XP 2002 PROF. 64-BIT
Regards
Gavin -
Until when give SAP support for version 7.30?
Hello,
Until when give SAP support for version 7.30?
How is the update from SAP GUI 7.30 to 7.40 handle?Hello Herr Jürs,
As per the attached note http://service.sap.com/sap/support/notes/147519
support ends in July
SAP GUI for Windows Support Deadlines
7.30: Full support up to July 15th, 2015. On July 15th, 2015 the used development environment Microsoft Visual Studio 2010 will transit to Microsoft's "Extended Maintenance" mode. This means that Microsoft will not create any corrections for components which belong to this development environment anymore (unless the issue is security relevant). Therefore no extension of full support for SAP GUI for Windows 7.30 beyond this date is possible.
Regards,
Jude -
Supported OData Version in SAP Gateway
Hello Experts!
I need to figure out about the supported OData Versions for SAP Gateway? I couldn't find anything at SAP Help or SCN. Is there a chance to get the supported version at our current system installation (any transaction or customizing step??)
Thanks in advance!Rupp,
As I see, Gateway is supposed to comply with OData V2 and they are gradually adding V3 features.
There is a reference here in first few lines of Andre's blog. How to consume an OData service using OData Services Consumption and Integration (OSCI).
If you are concerned about features supported, your best bet would be note 1574568. -
Key functional differences between SAP ECC Version 6.0 and SAP Version 4.6
Hi Forum,
As we are currently updgqrading to SAP ECC Version 6.0 from SAP Version 4.6, could someone please identify what are the new functionalities are being offred in SAP ECC 6.0.
Please let me know or guide me in a right direction - my email address is [email protected] or simply reply to the forum.
Thank you
YogeshDear Yogesh,
Please go through Upgrade info @ service.sap.com.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack.
4.6C supports NONUNICODE.
Hope this would add some more info.
Regards,
Naveen. -
Does PI 7.1 EHP1 supports java version 1.6?
Does PI 7.1 EHP1 supports java 1.6?
Where do i find these details?Hi Rajesh,
SAP PI 7.10, 7.11 (ehp1), 7.30 and 7.31 java code is compiled and shipped through JDK 1.5 and higher (1.6). SAP PI supports,
SAP Java JDK 1.5+ adn Sun's JDK 1.5. Whaterver customer code you write in your scenario like adapter module, java mapping and java proxy code, they all should compartiable with JDK version 1.5.
Thanks,
RK -
Hi all,
I tried to add new SAP versions (e.g. ERP2004, 2005) to the drop down list in landscape configurator in control center but they are not visible.
I added new modified xml files ( copies of R3.47.200.xml) to setup/com.sap.b1i.repository\SysType.xml folder and Patch folder too but nothing goes on.
I don't know, if it is important to change or add newer SAP Versions but I would like to do this because of better documentation.
Has anybody tried this successfully??
The workaround which is described in this posting: SAP Business One Integration Technology does not work for me.
Regards
RaykoHi all,
now it is official. I wrote an message to SAP support regarding this issue and the reply is the following:
sorry for the delay in getting back to you, I was double checking with t
he development department just to be sure of teh reply.
<b>Unfortunately ERP2004/2005 is not supported in the current release.</b>
It is very helpful to get information about inserting new entries in dropdown list of control center but they are for nothing because B1i does'nt support this SAP releases. Thanxx god I can connect to 4.6C ( which is out of maintenance) but not to the both newest releases of SAP ( ERP2004 comes up 3 years ago!!!)
Ok , 2 weeks of trying and working for nothing. It seems I have to wait nearly 2 or 3 years until our current SAP release is supported.
Thanxx Eddy for help. See you 2008
PS: on Cebit 2007 SAP sales team told me: of course ERP is supported!! -
Data types in SAP version 4.0
Hello
I have a requirement of copying a program from SAP version 4.7 to version 4.0.However String data type is not supported by version 4.0.
What are the data types in version 4.0.?
Is there any substitute of using sring data type in version 4.0 as I have to store a value
whose length can be even more than 500 characters.
Thanks and RegardsCheck the links:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/difference-between-the-sap-40b-and-sap-47-ver-567929
http://www.jt77.com/human/resources-23860.html
http://www.thespot4sap.com/Articles/SAP_Enterprise_4point7.pdf
Need advice/assistance with kernel upgrade planning
Reward if useful -
Do you plan support SAP BO XI Mobile for Unix!?
Hello!
Could you help to know answers to following questions please?
1. Does SAP plan support SAP BO XI Mobile for Unix!?
2. Can I install SAP BO XI Enterprise server on Unix machine and SAP BO XI Mobile install Windows machine?
Is it correct configuration for SAP BO XI system?
Best regards
AndreyThank you very much. But, Iu2019m interesting in the Business Object and SAP Integration KIT.
The Link only has the next software available.
Crystal Reports 2008
Crystal Reports XI
Crystal Reports for Eclipse
Crystal Reports Server 2008
Crystal Reports Server XI
Crystal Reports 2008 Visual Advantage
Xcelsius Engage 2008
Xcelsius Engage Server 2008
Xcelsius Present 2008
crystalreports.com
Nsite Business Applications
BusinessObjects Edge Series 3.0
Is there any other place where I can Find the Integration KIT? I mean, a free trial version of the integration Kit? -
Is Mountain lion support SAP on large Enterprises level
is Mountain lion support SAP on large Enterprises level?
SECOND FOLLOW UP TO MY "QUESTION" about Mountain Lion sleeping on the job after applying update to OS X 10.8.1.
In the event Apple Support staff is monitoring this discussion, this post is pertaining to a late model 2011 macbook pro primarily used for work for photo processing (RAW), video capture astrophotography with subsequent video editing and playback, picture/drawing creation and compilation, basic office functions such as accounting, spreadsheets, word processing and basic online activity.
Concerning this systems two specific issues and the one of shortened battery life affecting all other systems these are the resultant observations and recommendations for work arounds.
1. System goes to sleep while downloading a file unatended resulting in long or failed downloads.
No Improvement since update.
Workaround – I play a movie file while downloading, it's simple, it works, it's obvious on my desktop and doesn't involve installing more software or changing settings that can be forgotten.
2. Garbled display when undocking from a cinema display requiring hard restart resulting in lost data.
Marginal Improvement since update – the application of the update to version 10.8.1 has improved but not eliminated the garbled display to a partially garbled display that can be salvaged by changing screen resolution.
Workaround – Open the lid and wait for the display to appear then undock.
3. Short Battery Life
Marginal Improvement since update – battery life is approximately 10% longer on this machine.
Workaround – None, recharge more often.
Disposition – Mountain Lion 10.8.1 is still not worth upgrading to at this time.
Mountain Lion added a lot of nifty features that I have no interest in pertaining to my work. I stick to a few basic programs I use which I need a Mac to run. Given the shorter battery life, garbled display and the fact that the system shuts down while working unatended on a job this version OSX is not an improvement. -
List of SAP versions, Diff. between SAP versions
Can any1 send me a list of SAP versions and whts the different between these Versions. ?
ECC 5.0 is based on WAS 6.40 and ECC 6.0 is based on WAS 7.00.
From functional point of view there are some minor differences, as the core functionalities are not changed a lot. However there is Industrial Solutions intergarated to ECC 6.0 by default.
From ABAP point of view you have the following new elements/components:
- New ABAP editor /meanwhile it's available via downport for lower releases as well/
- ABAP WebDynpro
- Enhancement framework
- Regular experssion support
Also check this link for functionality differences.
http://solutionbrowser.erp.sap.fmpmedia.com/ -
Does BizTalk adapter pack 2010 support SAP ECC6 EHP5?
SAP Adapter BizTalk Adapter Pack 2.0:
Supported server versions: SAP ECC 6.0 Non-Unicode, SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode,
SAP R/3 4.7 Unicode, SAP R/3 4.6c Non-Unicode
SAP Adapter BizTalk Adapter Pack 2010:
Supported server versions: SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode, SAP R/3 4.7 Unicode, SAP
R/3 4.6c Non-Unicode, SAP ERP 6.0 with EHP 4.0
None specifically says it supports ECC 6.0 EHP5. But, I was able to find several posts that they are integrating with SAP ECC 6 EHP5 using BizTalk adapter. However, I would like to make sure whether Microsoft officially supports or not in case of technical
issue occurs.
Does anyone have an answer?I appreciate your response but I'm afraid that the information you have given is what I looked up before and thought they can't be an answer. As I already have stated in my question, I found several posts saying that they are integrating with ECC 6.0 EHP5
with BizTalk Adapter. With that, I can assume the BizTalk Adapter would work with EHP5 of ECC 6.0 as EHP is just an EnHancement Package. However, it does not mean Microsoft will support it when there is a technical issue unless it is stated so. So, what I
want to confirm here is more about liability. I cannot suggest my client to use BizTalk based on assumption.
To save anyone else's time, following are SAP versions supported by each BizTalk Adapter pack. None specifically mentions EHP 5. Can anyone from Microsoft or partner confirm this??
SAP Adapter BizTalk Adapter Pack 2.0:
Supported server versions:
SAP ECC 6.0 Non-Unicode, SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode, SAP R/3 4.7 Unicode, SAP R/3 4.6c Non-Unicode
SAP Adapter BizTalk Adapter Pack 2010:
Supported server versions:
SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode, SAP R/3 4.7 Unicode, SAP R/3 4.6c Non-Unicode, SAP ERP 6.0 with EHP 4.0
SAP Adapter BizTalk Adapter Pack 2013:
Supported server versions: SAP 7.2, SAP 7.0, SAP ERP 6.0 with EHP 4.0, SAP ECC 6.0 Unicode -
How web services support SAP transactions
Hi ,
How does webservices technology support SAP t-codes?
Regards
RajuYes and no. <a href="http://www.w3.org/Protocols/rfc2109/rfc2109.txt">rfc2109</a> . This means that cookies provide a kind of session and therefore state, which can be hold on server side.
SAP ABAP ERP holds session:
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/b7/d7baaf1481a349ab723e3acd7334b3/frameset.htm">Providing and Consuming Web Services</a>
"WSDLs - There are two kinds of WSDLs Standard and SAP WSDL. The standard WSDL is provided for those users who will use tools from other vendors to create clients. For SAP users, there is an extended SAP WSDL. This is an extended version of WSDL and can be parsed using SAP tools (SAP Proxy Generator), thus providing information about additional Web service requirements such as authentication, session, and so on."
for me is also the technical implementation - how is the webservice session managed on server and on client - not totally clear. If someone can help me to find exaxct technical details. Unfortenately I also always used it (esp. with Web Dynpro) without thinking about details. -
How to find the right OSS Note for my SAP version
Hi All,
There have been issues with the Vendor/Material Master records whenever we run a LSMW by recording process. It is such that all those fields that we have not updated come up with a value as *DELETED* for which i think we should implement a OSS Note to our system.
I am unable to find the right OSS Note Number for this to our SAP system :
SAP_APPL Support Pack: SAPKH50009 Components:Logistics & Accounting.
Request you all to provide me with the correct OSS Note Number so that we can get this issue corrected as this has become very critical.Hi,
As Jurgen wrote - it could be some programming problem.
But, generally, if you find a SAP Note, that, in your opinion, can solve your SAP problem and it is not intended for your SAP version - simply write to SAP OSS.
If this note really solves your problem, they will extend the validity of this note for your SAP version.
Otherwise, if it is SAP problem, OSS will try to provide solution for it.
I usually act like this - it works.
Hope it helps, not this time, maybe in the future.
Regards,
Wojciech -
Re: SAP Versions & Releases
Hi,
I want to know about the SAP ERP Release strategy. upto my knowledge ECC6 is the latest version in ERP.
Is their any change in installation procedure or environment between 4.7ee and ECC6.
vivekHi Vivek,
The SAP releases newer versions, these new versions has more functionality and features to meet the present business requirements,
for eg: You dont prefer to work Windows 98 no since you dont have all the additional features what you find in your present windows systems, like ease of use. Similarly SAP needs to come up with new functionality in order to make the client/customer feel comfort in running his business.
Similarly the installation procedure varies from 4.7EE to ECC5, in earlier versions you have installation tool R3setup which works in slightly different way and GUI screen input options are different.
From ECC5 we had SAPINST tool where you have more user friendly screen and easy to understand what each feild means and also you can restart the installation from where stopped.
About maintanence, SAP will give free support to its cleints for a term i think 5yrs, later there will be additional support for 3 yrs(this has to be paid), and later if still customer wanted support SAP provides for another 2 yrs(the cost is more) and after this SAP doesnot provide any support for that version and the client has to upgrade his software (since client pays for license every yr, which cost him same for older and newer version, its better suggested to get it upgraded)
Now most of companies has moved to ECC6(due to extensive functionalities of java stack) and many features of SAP work with SAP kernel 620 and above.
Hope this helped you to certain extent........
Regards.........
Maybe you are looking for
-
Error While Building Attribute Dimension in ASO Cube
Hi all, Cuurently I'm trying to bulit an ASO application in Oracle EPM 11.1.1.3 When I'm building an attribute dimension "QSize" in ASO cube ,I'm Getting some Warnings I'm using Flat file as my source AND MY RULE FILE IS GEN2,QSIZE, ALIAS2,QSIZE 1, "
-
Driver Program For Withholding tax(USA) Smartform 'idwtcert_us_1099misc1'
Hai friends, i need to print withholding taxes(USA) by using the smartform 'idwtcert_us_1099misc1'. for this purpose for driver program i checked in tnapr table. & i have checked in sap Img Path also. but i am unable to find it. so please help in
-
Missing Library libclntsh.so.10.1 after installation of HTML DB 1.6
Hi all, we have an installation of HTML DB 1.6 ("Standalone Apache) under RedHat Linux from the 10g Rel.1 Companion CD. LD_LIBRARY_PATH and SHLIB_PATH are both set to $ORACLE_HOME/lib. Now we saw that Oracle.so searches for a library libclntsh.so.10.
-
Can someone please tell me how to enable the flash player with firefox, i have followed all the steps, it says its enabled, but i have a X on top of a arrow pointing down- (at the end of the browser bar) when i hover over it, its labeled flash video
-
what is the use of sales order in APO? Which application(DP,SNP,PPDS) uses the same and for what purpose?