Supported UCS devices

I am trying to position SCH at a customer that wants to know if it will cover all UCS servers or just limited to C Servers

Hi Khosrow.
The UCS Manager (UCSM) supports Smart Call Home. Which means that all B-Series blade servers or C-Series rack servers that are managed by UCSM will be covered by Smart Call Home.
More information is available here:
http://www.cisco.com/en/US/services/ps2827/ps2978/ps7334/UCSServerswithSCH.pdf

Similar Messages

  • We have a router at home supposed to support 10 devices but when i try to connect my mac book pro it says another device is using your computer's ip address

    we have a router at home that is supposed to support 10 devices but when i try to connect my mac book pro it says another device is using my computer's ip address

    Are the IP addresses statically assigned (wrong ), or does the router give them out using DHCP (right )?

  • Could not find supported audio device in AA3

    okay so i know its not a good idea to use AA3 with Vista...but other people are doing it so why can't I? I've seen the topic posted before but the threads are pretty much dead and I still have no helpful info. I've scoured this thing with no affective solution. I've installed AA3 on several systems in the past and never had this much trouble--if any. This problem has gone on for over 2 months now!
    Since I installed AA3 on my new computer all i can get and all i have ever gotten is the "AA could not find a supported audio device. Please check device settings" dialog--
    press okay (or x) and Audition closes---never getting past the loading window --during "initalizing required components"
    I have 3 audio devices/ with up to date drivers which all my other audio programs recognize (Audition 1.5, Sonor, Cubase + more) with no problem whatsoever--
    AA3
    Windows Vista SP1 64 bit
    Realtek HD Audio
    + Presonus FP10 digital firewire interface/preamp (kind of unrelated but aa3 still wont recognize it either apparently)
    I have installed all updates including the 64-bit SP1 fix for AA3.
    I've read the Realtek HD issue solutions and made sure my drivers are fine.
    IM DESPERATE----PLEASE!!!
    I'm having a recording studio built right now & AA3 is my main DAW so this is rather dire.---All the other DAW's i've tried suck compared to AA3 (with the exception of stability). hehe AA3 is always crashing on me and yet i still prefer it over other DAW's.

    I put the PreSonus StudiLive 16.4.2 plus Adobe Audition 3 setup instructions into a short write-up on my blog: Live Event Multitrack Audio Capture
    Here is a photo showing how to set up the Firewire channels for input and output
    I hope this helps:
    Ron Fredericks
    LectureMaker, LLC

  • I have a Tritton TRI-BC200 hands free device that my iPhone 5 no longer "sees" on Bluetooth, so, I cannot pair the device. Anyone have a suggestion? Tritton no longer supports the device.

    I have a Tritton TRI-BC200 hands free device that my iPhone 5 no longer "sees" on Bluetooth, so, I cannot pair the device. Anyone have a suggestion? Tritton no longer supports the device.

    I had this problem and what I did was: read the user manual. I was actually using the wrong buttons to put the Tri-BC200 on pairing mode. I also boot my I phone. Everything worked OK. Regards.

  • Hi, im trying to download pictures from my camera but when I connect the lightning to usb camera adapter i get the message that there is too much energy required to support the device, can anyone help me?

    Hi, I´m trying to use the lightning to usb camera adaper, but I get a message that ¨there is too much energy needed to support the device¨, so I can´t download my pictures, can anyone help me?

    This discussion may help.
    It mostly depends on the camera. Some cameras have a Transfer Mode, which does not attempt to charge while transferring pictures. does yours have such a setting?
    Alternatively you can try to plug a powered USB hub between the camera and the USB connector so the power is provided by the HUB rather than the iPad.
    Other than that, yes the Memory card reader may be a better option assuming your Camera uses Secure Digital (SD) type memory cards.

  • [ANE] Repacking for simulator and fake support of device

    Hello,
    I have a question about anes, here is my problem : Some of the anes I use don't have simulator support or all-device support (only android, only iOS,...)
    In my code, I of course test the device before calling anything so its fine from a runtime point of view (never had a runtime issue).
    But, it does refuse to compile/launch. I know I could use multiple projects, compiler constants for imports, blablabla, but the best way to increase productivity would be to have them support all-device and simulator even if they do nothing with it.
    So what I tried :
    - rename ane as zip
    - edit extensions.xml, add proper stuff
    - rezip and rename back, and of course, don't call anything in the ane if you know your support is just "fake" for that device
    It works for simulator BUT if I use the rezipped ane in a iOS build (which was supported), it refuses to build a release. So I have to switch ane back and forth.
    It doesn't work if trying to add iOS support (well it compiles but when installing on device, install never ends). I tried adding a fake library.swf for iOS with only empty functions but didn't work.
    Haven't encountered the case where I need to add new Android support so I can't say for that one.
    Anyone knows of a quick way (which doesn't involve recreating all the concerned anes, since I don't have source code for them) ? Would create a huge productivity boost here.
    I hope question is clear enough.

    Understand that I'm not going to tell you that what you want is wrong. There's nothing wrong with wanting Flash on a tablet. The only problem is that the future of Flash no longer exists for tablets.
    fredfromewa wrote:
    So, does anyone know if real Java and Flash support is indeed coming in the future or am I going to have to either return or sell these IPADS and go switch a competitor...
    You can go to a competitor, but it won't help you in the long run since Adobe Flash on mobile is dead, and by the hand of Adobe themselves, not Apple. Here's the official announcement from 2 months ago:
    Adobe Abandons Mobile Flash, Backs HTML5
    You do have one alternative left: Buy a Windows-based tablet now. Why now? Because in mobile versions of Windows 8, Microsoft will no longer allow plug-ins like Flash:
    Microsoft Follows Apple, Bans Flash From Windows 8 Tablet Software
    In fact, even Microsoft's own Flash competitor, Silverlight, will not be allowed to run in tablet versions of Windows 8, only in desktop Windows.
    In the end, your last alternative will be to buy a Windows-based tablet that, ironically, does not run the tablet version of Windows, and then never upgrade it to Windows 8 mobile. You will probably be able to be run Flash then. But since the tablet will run desktop Windows, have fun with 30 minutes of battery life, maybe less after you boot Flash...
    fredfromewa wrote:
    ....they could easily have a much larger majority of the market with tablets by supporting Java and Flash.
    Uh...all the way up to now, the iPad practically has the entire tablet market to itself. How is it possible that Flash would have made that significantly larger?
    Seen from a different perspective...how is it that all the tablets that support Flash have completely failed to make a dent in the tablet market?
    Neither angle seems to support what you're saying.

  • I've had my iphone 5s since march 2014  and I've been using the same charger it came with. for the last two weeks ive been getting a message saying the accessory may not support the device. how is that possible?

    How come I keep getting a message saying that the accessory may not support the device?  I've been using the same charger that came in the box with the phone. Now it doesn't charge at all.

    Then take the cable, the plug and your iPhone to an Apple Store genius bar it is still  under the 12 month warranty

  • TS2634 I am trying to connect my camera through a USB and it says it does not support this device

    I just bought the USB connector for mynipadbandntried to connect my camera but it comes up does not support this device. What do I need to do in order to connect my camera ?

    What model camera?
    Cheers, Tom

  • I have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

    i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

    This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.

  • Ethernet Trunk Setup on 4500 to support UCS

    Looking for documentation that details the configuration steps needed to configure Port Channels and Trunking on a Cisco Catalyst 4500 and other Catalyst models to support the UCS 6100 Ethernet Uplinks. I have found all kinds of documents on creating the port-channel on UCS but am unable to find what needs to be done on the Network side to support UCS.

    The most important thing to know is that UCS Fabric Interconnects only support LACP etherchannels for upstream port aggregation. 
    On the 4500 side, you'll want to do something like this:
    Switch# configure terminal
    Switch(config)# interface range fastethernet 5/6 - 7 (Note: Space is mandatory.)
    Switch(config-if-range)# channel-group 2 mode active
    Switch(config-if-range)# end
    Switch# end
    Let me know what questions you have about this.
    --Justin

  • Can Web Dynpro for ABAP supports Mobile devices as like web dynpro for java

    HI,
    Experts,
    Web dynpro for abap application supports mobile devices as like web dynpro java application supports the mobile devices.
    Thnaks
    shabeer ahmed.

    Hi Shabeer,
    if you are looking for Mobile Web Dynpro, this is only supported with Java: [Mobile Web Dynpro |http://help.sap.com/saphelp_nw04/helpdata/en/7d/28fa3e7cb1d861e10000000a114084/frameset.htm]
    If you are on NW 7.0, check out this documentation:
    [Mobile Web Dynpro Online|http://help.sap.com/saphelp_nw70/helpdata/en/42/c136cb0f241d66e10000000a1553f6/frameset.htm]
    Kind regards
    Stefanie

  • Spartan-6 supported BPI devices for actual Memories

     
    We plan to start a new Design with Spartan-6 (XC6SLX45T-3FGG484).
    The BPI Flash on the SP605 Evaluation Kit is Obsolete.
    The list of supported BPI devices in ISE11 Suite is old.
    Is there a newer list of supported BPI devices for Spartan-6?
    Is the Micron M29W256GL supported?
     

    Hello,
    You need to follow below link to get the list of supported flashes with Spartan-6 devices.
    http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_7/pim_r_supported_spi_bpi_proms.htm

  • Fennec 4.0b6pre installs but immediately closes giving this message on X10 mini pro 2.1 "fennec does not support this device and you may experince problems."

    '''Fennec 4.0b6pre (arm6 nightly build) installs but immediately closes giving this message on X10 mini pro 2.1 "Fennec does not support this device and you may experience problems." and two option "continue" & "quit" but closes before clicking any button immediately. '''

    https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements
    Your device (I assume it's `'''Sony Ericsson Xperia X10 Mini'''`) is not compatible with Fennec ARMv7-optimized releases, but might be able to run the [https://wiki.mozilla.org/Mobile/Platforms/Android#ARMv6_.28experimental.29 experimental ARMv6 nightly builds].

  • Console Launcher No support Audio Device Available

    Note: Creative SB X-fi is detected (without a yellow mark) in my device manger. My card is an X-fi Titanium Fatalty Professional.
    The easiest way I can put this is by explaining the mistake I made. Without installing the card, I moved it from one PCI-e slot to another, the one below it. This caused a small annoying issue that I decided to fix by totally uninstalling the card (correctly I hope) and putting it back in it's original slot. After reinstalling it via the disk it came with, when the computer restarts afterwards I am told that no supported hardware is detected and most of what seems to have installed correctly doesn't even show in my programs.
    I have tried uninstalling and driver sweeper for HOURS straight over and over and so far nothing is working. Has anyone had a similar issue or know what the problem is? I've already made sure I'm using the same settings I originally used before moving slots but no dice.
    P.S. During SOME of the updates or even installations, I? occasionally receive the error I-00 (usually during Alchemy or Creative Control Console installations or Updates) and I am told the installation can't continue. It does though, simply bypassing these things/
    I am using Windows 7 64bit

    Update: I'm facing a new issue now during installation! -EVERY- time the install wizard finishes and I restart the computer, I see the volume panel icon on the task bar and Creative SB X-fi when I hover over it. However, when I double click to open the console launcher (Which installed correctly to my knowledge) I'm told no supported audio device is available.
    Did I break my card or something after what I did earlier? Or is my disk screwed up now too? I'd really rather not use the motherboard's crappy audio, I can actually tell that the audio quality is lower.

  • E5 DAC/Amp Win8 error "There is no supported audio device available"

    I've just received my Sb E5, and installed the software package (while the E5 was connected and charging) without "apparent" problems. However, if I start the software it will report a problem with reading the device, and if I use the menu and select "audio device selection" it will immediately report"
    "There is no supported audio device available"
    If I disconnect, the software's volume indicator will max, and then if I reconnect USB the volume will return to ~15%.
    Please advise ...
    TIA

    Have you installed all of the drivers:
    http://www.msi.com/product/mb/Z77A-G45.html#/?div=Driver&os=Win7%2064
    I don't see anything about the Sound Blaster Cinema 
    http://www.msi.com/product/mb/Z77A-G45.html#/?div=Overview
    Did you mean the z87-g45 gaming? http://www.msi.com/product/mb/Z87-G45-GAMING.html

Maybe you are looking for