Supported versions of FCP

Just got the new Mac Book Pro...Which versions of FCP are supported on these new intel macs?

Final Cut Studio 5.1 and Final Cut Studio 6.

Similar Messages

What earlier version of FCP will work with the intel-3processor?

what earlier version of FCP will work with the intel-3 processor?

The version of the CR designer that the reports were created in is really not that important. Though more on that below. What you need is Crystal Reports XI R2A (11.5.x). That is the last version of CR to ship the Report Designer Component (RDC) that you are presumably using at this time. Note that this version is out of support thus no fixes, no phone support, though we welcome your queries on these forums. To obtain CR XI R2A you will have to contact sales; 866-681-3435. Do not get CR 2008 (12.x) as this version does not ship the RDC and only has the SDK for .NET and Java.
Re. version of the reports. While the version of the designer the reports were created in should not be that important, the older the designer, the more potential problems you may run into. Updating the reports to CR XI R2A is highly advised. You can do this manually by simply opening the reports in the designer and saving them - making sure they still run once that is done. Alternatively, you can do this in code by simply using the .SaveAs method, or exporting to rpt file format. This may not however update the database connectivity correctly (the database engine was completely rewritten in CR 9) and testing will be needed to make sure these reports still work. This is particularly true of your version 8 reports. Version 9 reports and later should be OK.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Working between different versions of FCP

Hi folks,
I've seen some posts where this is addressed a bit, but not for the versions of FCP that I'm dealing with so I wanted to see if anyone had any insight.
I have one of the final generation PowerPC G5s and I got FCP 5.0 (as part of FCS) when I bought the system. Somehow I missed the universal upgrade to 5.1 while it was offered (I know, I know, they offered it for like two years, I have no idea how I missed it) and so I'm maxed out at 5.0.4 because none of the newer version will run on my system.
At the moment I have a short film I directed and cut in 5.0 and the last bit of work (color correction and dropping in the final auidio mix) was done in 5.1. I'm wondering if there is a way to open that 5.1 project in 5.0 so that I can make some additional changes.
I've seen posts about exporting XMLs to move projects between 6.0 and 5.1, but I wasn't sure if that worked between only between those two versions
Is there a similar method to go between 7.0 and early versions if I end up upgrading my machine?
Any insight would be appreciated.
Thanks in adavance,
Avi

You can use XML to make a version 7 project open as far back as version 4. All you need to do is choose the correct version of XML:
FCP4 supports XML version 1 only
FCP5 supports XML versions 1 and 2
FCP5.1 supports XML versions 1, 2 and 3
FCP6 supports XML versions 1, 2, 3 and 4
FCP7 supports XML versions 1, 2, 3, 4 and 5.

Error. your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.

I have the following inside my SharePoint server 2013 :-
EnterPrise Wiki site collection.
i have both "Excel services Application "& "Visio Graphics Service" running correctly.
The problem i am facing is as follow:-
when a user click on an Excel sheet or Visio document , it will be shown inside the browser without any problem.
but if the user click on "Open in Visio" OR "Open in Excel" links inside the browser, they will get the following errors:-
Sorry, but to open this workbook, your computer must be running a supported version of Microsoft Excel and a browser that supports opening files directly from Office Web Apps.
To open this document, your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.
I have the following settings inside my PC:-
Office 2010 for Excel, word, power point,etc.
Visio 2013.
i have disabled SharePoint foundation support for office 2013
Can anyone advice on this please?

Hi,
Please try to reset the Internet Explorer settings or open Internet Explorer in In-Private browsing and then check if this issue occurs.
If the issue persists, please try to access SharePoint in another computer with Office 2013 and then check if this issue occurs. Or repair Office and restart your server.
Here is a blog about the same issue for you to take a look at:
http://sharepointexit.blogspot.com/2013/12/sorry-but-to-open-this-workbook.html
Best Regards
Dennis Guo
TechNet Community Support

Multiple versions of FCP on one system

Hi guys just a quick question. I have FCP 5 installed on my mac. I am about to purchase Final Cut Studio 2, meaning FCP 6 will be installed on my system too.
Does this mean I will have to uninstall FCP 5 first or will I basically have two FCP's on my system. My only worry is that installing FCP 6 will overwrite/destroy a project that I'm currently editing on FCP 5?
Any suggestions or help on in?
Also is Final Cut Studio 2 compatible with OSX 10.4.11?
Thanks!!

When you install FCS 2 the higher version of FCP 6 will replace your installation of FCP 5.
You will not lose project files.
Also is Final Cut Studio 2 compatible with OSX 10.4.11?
Mac OS X 10.4.9 or later.

Is there a way to edit a project on two different versions of FCP?

I am editing for a director who has a higher version of FCP. I don't want to upgrade because it will interfere with my work with other directors. But I'd like to be able to take the film that's now on 6.0.4 to my computer, which is running 6.0.1. I thought I'd heard somewhere about exporting an edl and being able to use that? I don't know anything about this, so if anyone can let me know if that's possible and and what the work flow is, it would be great!
thanks

See if there's a way with your current configuration to make this idea work:
Clone your 2nd internal drive volume onto an external drive, then clone your boot drive volume onto the 2nd internal volume (erasing everything that's on the 2nd internal first.)
Now you have two identical boot drives in your G5. With one of them booted, invoke Software Update, and update Final Cut to v6.0.4. Use that volume to work on this project, and when you have to work on a project that requires v6.0.1, boot to that drive volume.
The downside is that your media files will now be on a firewire drive, but that's doable. Better yet, buy an eSATA PCI card and install it in your G5, and buy an eSATA external enclosure for your media drives. Perfect.

Why will not Mozilla-Firefox not open in the version 3.5.16? The schoolonly supports version 3.0

My question is why does Mozilla Firefox version 3.5.1.6 not work when it always had in the past since 2009 approximately.
The only thing different is that I did purchase Norton 2011 then upgraded to Norton 2012 Anti-Virus Protection Suite.
The School I go to will only support Version 3.0 Firefox. I have installed the version 7.0 from your sight by clicking download. I used the older version 3.5.1.6 on my laptop as well with no problems but now it won't work and they both crash. I have clicked on send reports but no answers yet. The laptop as well as my desktop had viruses from a server that I used which I found out had two computers which weren't virus protected with current updated signatures. This was McAfee "Total Protection Suite" which did not give me any protection at all and this is what happened, and it should have at least blocked me from getting onto the Internet through the server. I only used this server as a gateway only. I never had this problem with AVG Protection Anti-Virus Suite, but then I changed to McAfee, which the server uses, and this is when all my problems started because two computers on this network were not protect with updated virus signatures. The viruses crashed my Laptop and almost my desktop as well. I ran Norton and this took care of the problem on my desktop and then I ran Malwarebytes and Hitman both Virus Scanners and removed all 53 viruses, PUPS, and other Malware.
I reinstalled both of the Mozilla Firefox version 3.5.2.6 and I got the message that said sorry the browser crashed and click OK to send a report to Firefox which I did. I can't start school without Mozilla Firefox as the School only supports Firefox 3.0. As I had corrupted files from the problems with all the Malware and I have resolved most of the issues now except that I will have to upgrade to Windows 7 "Home Premium" and I am working with Dell Tech. Support with this and trying to complete as much as possible before I call them back.
Will I be able to use the older version and is Norton 2012 the program causing the older versions not to work?

You can install the portable Firefox 3.6.x version, that comes with its own profile, to access websites that do not work with Firefox 5+.
*http://portableapps.com/apps/internet/firefox_portable#legacy
*http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
You probably need to create a new profile because the SQLite version used in Firefox 3.5 is not compatible the the SQLite version that is used by current Firefox versions.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Sun Studio (12,1) is unable to find a supported version of the Netbeans IDE

Hi all,
We're working on upgrading both the hardware and software on our application currently, and part of this involves upgrading our compiler to Sun Studio 12.1. I downloaded
SunStudio12u1-SunOS-SPARC-pkgs-ML.tar.bz2
from the Sun website and we installed it into the following location on our server:
/opt/compiler/sunstudio12.1
I successfully compiled all my code using the compiler, however, when I try to launch the debugger by typing ./sunstudio in the 'bin' directory, I get the following error:
{opt/compiler/sunstudio12.1/bin}./sunstudio
Sun Studio is unable to find a supported version of the NetBeans IDE.
Sun Studio requires a NetBeans IDE version 6.5.1 with NetBeans C/C++ module (cnd
2) enabled.
Sun Studio looks for a valid NetBeans IDE installation in the following order:
1) Location specified with --netbeanshome command line option
2) At /opt/compiler/sunstudio12.1/netbeans
I have seen references to executing 'prepare_system' on forums while I was trying to investigate this, but when our sys admin folks try to execute the command, it does not work (command not found). They've mentioned that they expected a prepare_system script in the directory where we untarred the downloaded sun studio tarfile, but it is not there:
drwxrwxr-x 4 59001 staff 1024 Aug 20 2009 .
drwxr-xr-x 3 yu12 lifecad 1024 Jul 2 09:48 ..
drwxrwxr-x 4 59001 staff 1024 Aug 17 2009 LEGAL
-rw-rw-r-- 1 59001 staff 3985 Aug 19 2009 SS12u1_README-pkgs.txt
-rw-r--r-- 1 59001 staff 5598 Aug 20 2009 SS12u1_README-pkgs_ja.html
-rw-r--r-- 1 59001 staff 4155 Aug 20 2009 SS12u1_README-pkgs_zh.html
-rwxrwxr-x 1 59001 staff 517979136 Aug 6 2009 SunStudio12u1-SunOS-SPARC-pkgs.sh
-rwxrwxr-x 1 59001 staff 11814 Aug 6 2009 install_patches.sh
drwxrwxr-x 5 59001 staff 96 Aug 17 2009 patches
I can see a netbeans directory was created as part of the install, but I'm not sure why sun studio thinks netbeans is not available (afraid my knowledge about netbeans is practically non existent):
{opt/compiler/sunstudio12.1/netbeans}ls -l
total 6062
drwxr-x--- 2 root root 512 Apr 5 11:14 bin
drwxr-x--- 7 root root 512 Apr 5 11:14 cnd2
-rw-rw-r-- 1 root root 5254 Mar 5 2009 CREDITS_ja.html
-rw-rw-r-- 1 root root 5175 Mar 5 2009 CREDITS_pt_BR.html
-rw-rw-r-- 1 root root 4908 Mar 5 2009 CREDITS_zh_CN.html
-rw-rw-r-- 1 root root 5434 Mar 5 2009 CREDITS.html
-rw-rw-r-- 1 root root 1717 Mar 5 2009 DISTRIBUTION.txt
-rw-rw-r-- 1 root root 0 Aug 6 2009 dummy
drwxr-x--- 2 root root 512 Apr 5 11:14 etc
drwxr-x--- 7 root root 512 Apr 5 11:14 gsf1
drwxr-x--- 6 root root 512 Apr 5 11:14 ide10
-rw-rw-r-- 1 root root 1845 Mar 5 2009 LEGALNOTICE.txt
-rw-rw-r-- 1 root root 64275 Mar 5 2009 LICENSE.txt
-rw-rw-r-- 1 root root 37141 Mar 5 2009 moduleCluster.properties
drwxr-x--- 7 root root 512 Apr 5 11:14 nb6.5
-rw-rw-r-- 1 root root 15822 Mar 5 2009 netbeans.css
drwxr-x--- 8 root root 512 Apr 5 11:14 platform9
-rw-rw-r-- 1 root root 6141 Mar 5 2009 README_ja.html
-rw-rw-r-- 1 root root 5692 Mar 5 2009 README_pt_BR.html
-rw-rw-r-- 1 root root 5122 Mar 5 2009 README_zh_CN.html
-rw-rw-r-- 1 root root 5155 Mar 5 2009 README.html
-rw-rw-r-- 1 root root 2913280 Mar 5 2009 THIRDPARTYLICENSE.txt
drwxr-x--- 5 root root 512 Apr 5 11:14 websvccommon1
Our server details are:
{opt/compiler}uname -a
SunOS a03714 5.10 Generic_142900-03 sun4v sparc SUNW,T5440
Any advice appreciated on how to get the debugger working. Ideally, I'd prefer not to uninstall / reinstall if at all possible as we're about to start system testing our executables, and I think a reinstall would require more unit teting and delays to our project (yikes!). But any input would be appreciated here.
Thanks,
Brendan.

Hi David,
First off - thanks for the response. I do have some follow up questions if you don't mind though:
1. When you say the install is corrupted, do you suspect
- the file I downloaded from the website either was corrupted, or was not the correct file for my platform
- the procedure used to install the software was incorrect
- something else
2. Is there a logfile that the sun studio install creates which would indicate an error during the installation procedure? I'm sure our admins who performed the install would have shouted if an error was logged... but on the offchance that the installation does not 'shout loudly' for some errors, I'd like to see a log of the error. At a minimum, I'd expect it to say why the install failed, and what we need to modify to ensure a successful install next time 'round.
3. I successfully compiled my code using the C compiler from the install. My unit tests also look good... does this suggest that the install was at least a partial success, and would you suspect that my recompiled executables are reliable, despite the fact that I cannot launch the IDE?
4. Today, one of our admins telnetted to our unix server - not via exceed by the way, but he did try the following test:
- set his display env variable (he knew he would not get a display however)
- executed the sunstudio script
He did not get the netbeans error, and the process appeared to be running (as I mentioned, without a display) until he killed it. I've asked if they can repeat the test using an exceed session. I thought there may be something on his $PATH that I did not have - unfortunately this was not the case (although, he may have access as 'root' to something that I require to launch the IDE). My question is, would you expect this behaviour if the install was corrupted?
Let me know what you think.
Thanks,
Brendan.

Working with different versions of FCP

My apologies if this is answered somewhere else but is there any way to work on a newer version of FCP then take that project to an older version?
We have 5.1 at home but the workplace has 5.0. I'd like to do some work at home and am not sure how take the project back on forth.
Your help is greatly appreciated.

Welcome to the forum!
XML exports and imports will allow you to go back and forth with sequences. But since the crossgrade is so inexpensive, I'd suggest the office buy the latest software, so you don't waste time and effort doing this. I don't think every single aspect of what you do at home will translate completely with XML being the transfer technique.
There's a fine article written by Philip Hodgetts on the subject here: http://www.kenstone.net/fcphomepage/xmlhodgetts.html
Jerry

I need firefox 2 temporarily to use with a program that does not support version above 2.0 what do i do

I am trying to access information from a teaching site for securities exam and it will not let me access the programs because it does not support version above 2.0 and i have 3.0 or 3.5 please advise.

The page title is "Minimum System Requirements for FINRA E-Learning Courses", so I would assume that the page works with newer Firefox versions. All other requirements on that page looks pretty outdated with Flash 8 as minimum.
* http://www.finra.org/Industry/Education/OnlineLearning/E-learningCourses/P119435
On which page do you get that error?<br />
The login page in your More system details list doesn't give an error for me.
If you really need such an old version the use the portable version of Firefox 2.0.0.20.<br />
You can find the portable Firefox 2.0.0.20 version under "Mozilla Firefox, P.E. Legacy > Mozilla Firefox":
Win: http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox,%20P.E.%20Legacy/
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.0 r32
# Java Plug-in 1.6.0_13 for Netscape Navigator (DLL Helper)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

Is the latest version of FCP studio compatible with Radeon X1600 graphics..

I read under the requirements that the latest version of FCP studio is not compatible with "integrated graphics cards"... what does that mean to me with an iMac that has a Radeon X1600 with 128MB and a bus type PCIe? Will it work?
Thanks!

Final Cut Studio 2 (with FCP 6) runs just fine on my 2.0 GHz 20" iMac CD, which has a 128 MB ATI Radeon X1600 with an external display (1280x1024) connected via DVI.

Apple application support version 1.4.1 is installed error

I keep getting this error when I attempt to open itunes after upgrading to the latest version. 10.1.1
Apple application support version 1.4.1 is installed, itunes requires apple application support version 1.3.2 or later
Does anyone know what to do about it?
I have already uninstall the entire program and all its components 3 times. Still, same error after re-installing.

Bang goes another theory. Okay, let's try putting your AAS 1.4.1 back. (Fingers crossed, iTunes will notice it properly this time.)
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Error: The domain in this directory is not a supported version.

I am using configure utility in workshop to select the appropriate domain. The domain has been created with weblogic 8.1 I get following errors:
The domain in this directory is not a supported version.
any idea, why am i getting this error?
Thanks,
Ashish

Hello Jun,
Did the suggestion of adding stuff into config.xml file ("<Domain Name="fo_testdomain" ConfigurationVersion="8.1.3.0"> in your config.xml
") resolved your problem. If not , then do open a support ticket to know more about CR173024 and CR133495.
Following is the summary of CR173024.
WLS 81 SP2 - Configuration wizard fails with "The domain in this directory is not a supported version".
Hope it helps.
Kuldeep

Sun Studio is unable to find a supported version of the NetBeans IDE at the

I'm following the system install instructions in the Grid Compute Utility guide, Appendix A "Building a Local Development Environment" and am getting stuck on step 4, installing sunstudio. I'm running Solaris 5.10 on x86 and can run netbeans IDE without problem. Here is some info, I'm not sure what other system info is relevant:
bash-3.00# which netbeans
/opt/netbeans-5.5.1/bin/netbeans
bash-3.00# which sunstudio
/usr/bin/sunstudio
bash-3.00# sunstudio
Validating NetBeans IDE at: "/opt/SUNWspro/../netbeans-5.5.1"
Sun Studio is unable to find a supported version of the NetBeans IDE at the specified location.
Sun Studio requires a NetBeans IDE version 5.5.1 with NetBeans C/C++ Development Pack version 5.5.1
installed. Sun Studio looks for a valid NetBeans IDE installation in the following order:
1) Location specified with --netbeanshome command line option
2) At /opt/netbeans-5.5.1 location, if exists
3) At /opt/SUNWspro/../netbeans-5.5.1 location, if exists
4) At /opt/SUNWspro/../../netbeans-5.5.1 location, if exists
Please run the System Preparation Tool (prepare_system), if available, to set up your environment.
Any help!?

Did you install NetBeans separately or let Sun Studio installer do it? The latter usually results in working configuration.
I think that NetBeans installation simply doesn't have c++ pack; you can install one following usual NetBeans modules installation path and then re-try starting Sun Studio.
Another option is to uninstall NetBeans and re-install Sun Studio using its installer, which should set up NetBeans properly.

Installation of a 2nd version of FCP X

how do I download a second version of FCP X to MacBook? I bought and downloaded a version to a MacBook Pro 3 months ago, and need it on a small computer

See > https://discussions.apple.com/message/23979860#23979860

Supported versions of FCP

Similar Messages

Maybe you are looking for