Supported XPath expression

Hello,
LD8.1 does not support following :
for $a in views:myView()//convns:Bus | //convns:Car
EJB Exception:; nested exception is:
java.rmi.RemoteException: Query Compilation Error (Type Checks) 1-3-1-10: Accessing
the default context / is currently not supported.
Are there plans to implement support for this ?
Sincerely,
Benjamin.

Use
for $a in ( views:myView()//convns:Bus , views:myView()//convns:Car )
- Mike
"Benjamin Shrom" <[email protected]> wrote:
>
Hello,
LD8.1 does not support following :
for $a in views:myView()//convns:Bus | //convns:Car
EJB Exception:; nested exception is:
java.rmi.RemoteException: Query Compilation Error (Type Checks) 1-3-1-10:
Accessing
the default context / is currently not supported.
Are there plans to implement support for this ?
Sincerely,
Benjamin.

Similar Messages

Using the variable placeholder ? in an XPath expression

I'm trying to using the variable operator (?) in an Oracle prepared statement used in a query where clause. Here is the query:
select xt.APPLICATION_NAME, xt.VERSION, xt.EVENT_TYPE, xt.SENDING_SITE, xt.RECEIVING_SITE, xt.EVENT_ID
      from AUDITED_EVENT_XML_MIN e,
         XMLTable(XMLNAMESPACES('http://gov/va/med/datasharing/audit/endpoint/audit' AS "xae"),
                '/xae:auditable-event'
                PASSING e.xml_event_content
                COLUMNS
                APPLICATION_NAME VARCHAR2(255) PATH 'xae:application-name',
                VERSION          VARCHAR2(255) PATH 'xae:version',
                EVENT_TYPE       VARCHAR2(255) PATH 'xae:event-type',
                SENDING_SITE     VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.4/HD.2',
                RECEIVING_SITE   VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.6/HD.2',
                EVENT_ID         VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.10') xt
            where existsNode(E.XML_EVENT_CONTENT, '/xae:auditable-event[xae:event-type=?]','xmlns:xae="http://gov/va/med/datasharing/audit/endpoint/audit"') = 1This code works when the ? is replaced with "aValue". I need to use the ? so that my Java client can pass a variable value into the query.
Is this a supportable feature or am I doing something wrong?
I didn't see any examples in the Oracle XML DB Developers Guide where there was a ? in an XPath expression.
I also tried "?" with the same issue...
Here is the version info:
SQL*Plus: Release 11.1.0.6.0 - Production on Mon Sep 10 18:41:55 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsAny assistance would be greatly appreciated.
Thanks in advance...
Edited by: flyeagle5683 on Sep 10, 2012 5:49 PM

select xt.APPLICATION_NAME, xt.VERSION, xt.EVENT_TYPE, xt.SENDING_SITE, xt.RECEIVING_SITE, xt.EVENT_ID
      from AUDITED_EVENT_XML_MIN e,
         XMLTable(XMLNAMESPACES('http://gov/va/med/datasharing/audit/endpoint/audit' AS "xae"),
                '/xae:auditable-event'
                PASSING e.xml_event_content
                COLUMNS
                APPLICATION_NAME VARCHAR2(255) PATH 'xae:application-name',
                VERSION          VARCHAR2(255) PATH 'xae:version',
                EVENT_TYPE       VARCHAR2(255) PATH 'xae:event-type',
                SENDING_SITE     VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.4/HD.2',
                RECEIVING_SITE   VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.6/HD.2',
                EVENT_ID         VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.10') xt
            where XMLEXISTS(
                       'declarre namespace xae ="http://gov/va/med/datasharing/audit/endpoint/audit"; (: :)
                        $XML/xae:auditable-event[xae:event-type=$VALUE]'
                        passing e.xml_event_content as "XML",
                                  :1 as "VALUE"
            ) or you can do
select xt.APPLICATION_NAME, xt.VERSION, xt.EVENT_TYPE, xt.SENDING_SITE, xt.RECEIVING_SITE, xt.EVENT_ID
      from AUDITED_EVENT_XML_MIN e,
         XMLTable(XMLNAMESPACES('http://gov/va/med/datasharing/audit/endpoint/audit' AS "xae"),
                '/xae:auditable-event'
                PASSING e.xml_event_content
                COLUMNS
                APPLICATION_NAME VARCHAR2(255) PATH 'xae:application-name',
                VERSION          VARCHAR2(255) PATH 'xae:version',
                EVENT_TYPE       VARCHAR2(255) PATH 'xae:event-type',
                SENDING_SITE     VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.4/HD.2',
                RECEIVING_SITE   VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.6/HD.2',
                EVENT_ID         VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.10') xt
      WHERE EVENT_TYPE = :1Edited by: mdrake on Sep 10, 2012 7:23 PM
Edited by: mdrake on Sep 10, 2012 7:24 PM

Using the variable ? operator in an XPath Expression

I'm trying to using the variable operator (?) in an Oracle prepared statement used in a query where clause. Here is the query:
select xt.APPLICATION_NAME, xt.VERSION, xt.EVENT_TYPE, xt.SENDING_SITE, xt.RECEIVING_SITE, xt.EVENT_ID
 from AUDITED_EVENT_XML_MIN e,
 XMLTable(XMLNAMESPACES('http://gov/va/med/datasharing/audit/endpoint/audit' AS "xae"),
 '/xae:auditable-event'
 PASSING e.xml_event_content
 COLUMNS
 APPLICATION_NAME VARCHAR2(255) PATH 'xae:application-name',
 VERSION VARCHAR2(255) PATH 'xae:version',
 EVENT_TYPE VARCHAR2(255) PATH 'xae:event-type',
 SENDING_SITE VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.4/HD.2',
 RECEIVING_SITE VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.6/HD.2',
 EVENT_ID VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.10') xt
 where existsNode(E.XML_EVENT_CONTENT, '/xae:auditable-event[xae:event-type=?]','xmlns:xae="http://gov/va/med/datasharing/audit/endpoint/audit"') = 1This code works when the ? is replaced with "aValue". I need to use the ? so that my Java client can pass a variable value into the query.
Is this a supportable feature or am I doing something wrong?
I didn't see any examples in the Oracle XML DB Developers Guide where there was a ? in an XPath expression.
I also tried "?" with the same issue...
Here is the version info:
SQL*Plus: Release 11.1.0.6.0 - Production on Mon Sep 10 18:41:55 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsAny assistance would be greatly appreciated.
Thanks in advance...

I incorporated this suggestion and it worked very well. Thanks!
Now I have converted my solution to use a structured index. As such, I want to write the where clauses in terms of column names rather than XPath expressions.
I hoped it was as simple as changing the code that generates the XPath expression to generate a SQL expression. After making that change, I'm now getting this error:
Caused by: java.sql.SQLSyntaxErrorException: ORA-00920: invalid relational operator
 at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
 at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
 at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:686)
 at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:617)
 at oracle.jdbc.driver.T2CPreparedStatement.executeForDescribe(T2CPreparedStatement.java:559)
 at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1077)
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1186)
 at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
 at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3425)
 at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1490)
 at gov.va.med.datasharing.audit.dao.jdbc.runner.MapQueryRunner.run(MapQueryRunner.java:47)
 at gov.va.med.datasharing.audit.web.dao.jdbc.AuditableEventsQueryDAOImpl.getAuditableEventsByDate(AuditableEventsQueryDAOImpl.java:150)It seemed to me that if it worked for the XPath expression that it should also work for the SQL expression.
The static SQL is:
SELECT PK_ID, EVENT_TYPE, OUTCOME, SENDING_SITE, RECEIVING_SITE, CREATED_TIME, EVENT_ID, PATIENT_ID FROM
(SELECT rownum as rn, PK_ID, EVENT_TYPE, OUTCOME, SENDING_SITE, RECEIVING_SITE, CREATED_TIME, EVENT_ID, PATIENT_ID FROM
 (SELECT aet.AUDITABLE_EVENT_XML_PK_ID AS PK_ID, xt.EVENT_TYPE, xt.OUTCOME, xt.SENDING_SITE, xt.RECEIVING_SITE, aet.CREATED_TIME as CREATED_TIME, xt.EVENT_ID, xt.PATIENT_ID
 FROM AUDITABLE_EVENT_XML aet,
 XMLTable(XMLNAMESPACES('http://gov/va/med/datasharing/audit/endpoint/audit' AS "xae"),
 '/xae:auditable-event'
 PASSING aet.xml_event_content
 COLUMNS
 EVENT_TYPE VARCHAR2(255) PATH 'xae:event-type',
 SENDING_SITE VARCHAR2(255) PATH 'xae:sending-site',
 RECEIVING_SITE VARCHAR2(255) PATH 'xae:receiving-site',
 EVENT_ID VARCHAR2(255) PATH 'xae:event-id',
 PATIENT_ID VARCHAR2(255) PATH 'xae:patient-id',
 OUTCOME VARCHAR2(255) PATH 'xae:outcome') xt
 WHERE aet.CREATED_TIME BETWEEN ? AND ?
 AND ?
 ) ORDER BY CREATED_TIME desc
 ) WHERE rn > ? and rn <= ?So I'm thinking that Oracle must perform strong checking in SQL, not allowing the '=' operator to be substituted. If I run this query in Toad, replacing the ? with the SQL, it runs fine...
Can someone tell me whether or not this is a legal substitution?
The SQL that runs in Toad is:
SELECT PK_ID, EVENT_TYPE, OUTCOME, SENDING_SITE, RECEIVING_SITE, CREATED_TIME, EVENT_ID, PATIENT_ID FROM
(SELECT rownum as rn, PK_ID, EVENT_TYPE, OUTCOME, SENDING_SITE, RECEIVING_SITE, CREATED_TIME, EVENT_ID, PATIENT_ID FROM
 (SELECT aet.AUDITABLE_EVENT_XML_PK_ID AS PK_ID, xt.EVENT_TYPE, xt.OUTCOME, xt.SENDING_SITE, xt.RECEIVING_SITE, aet.CREATED_TIME as CREATED_TIME, xt.EVENT_ID, xt.PATIENT_ID
 FROM AUDITABLE_EVENT_XML aet,
 XMLTable(XMLNAMESPACES('http://gov/va/med/datasharing/audit/endpoint/audit' AS "xae"),
 '/xae:auditable-event'
 PASSING aet.xml_event_content
 COLUMNS
 EVENT_TYPE VARCHAR2(255) PATH 'xae:event-type',
 SENDING_SITE VARCHAR2(255) PATH 'xae:sending-site',
 RECEIVING_SITE VARCHAR2(255) PATH 'xae:receiving-site',
 EVENT_ID VARCHAR2(255) PATH 'xae:event-id',
 PATIENT_ID VARCHAR2(255) PATH 'xae:patient-id',
 OUTCOME VARCHAR2(255) PATH 'xae:outcome') xt
 WHERE aet.CREATED_TIME BETWEEN TO_DATE ('9/19/2011 12:00:01 AM','MM/DD/YYYY HH:MI:SS PM')
 AND TO_DATE ('12/20/2012 12:00:00 AM','MM/DD/YYYY HH:MI:SS PM')
 AND (OUTCOME=0 or OUTCOME=1)
 ) ORDER BY CREATED_TIME desc
 ) WHERE rn > 0 and rn <= 5;Any assistance will be appreciated,
Thanks in advance.

Using xpath expressions in Document-Builder

Hi all
we have re-designed our (existing) DDX-templates with the Document Builder in LC Workbench. The DDX templates are used to assemble PDFs with LC Assembler-Service.
Now my question: Is it still possible to use XPath-expression in the DDX template? Please find our example below:
The XPath expression works only if we copy&paste the DDX source code directly to the Assembler-Service property view (picture below). But referring the DDX-template doens't interpret the xpath path at run time (2nd picture below). Any help on that will be appreciated!
Works (using DDX source code directly):
Doesn't work (using DDX template):

Hi,
>
I tried to get a portion of an XML by using XPath Expressions as follows:
String xPathExpression =
"declare namespace xq='http://inti.notariado.org/indices' " +
"$this/xq:RULES/xq:RULE[@disabled]";
I think any XPath expressions which use [] are not supported in stand alone
version, but as this is not documented I could be wrong.
Regards
Arek

XPath Expressions

Hi,
I am trying to select a particular node in a loaded DOM tree based on XPATH expressions. Rightnow We are using Xerces parser.
Can anyone throw some light on this? i.e. Standard way of implementing this?
Thanks in anticipation.
With Regards
K.RajeshKannan.

Xpath expression is similiar like SQL queries.I don't think you could standardize the way ( if your queries is simple ).Another thing is Xerces does not support XPath.Try Xalan instead.

XPath expressions in XmlCursor / XmlObjects

Hi all,
I tried to get a portion of an XML by using XPath Expressions as follows:
String xPathExpression =
"declare namespace xq='http://inti.notariado.org/indices' " +
"$this/xq:RULES/xq:RULE[@disabled]";
A simple example of an xml
<rules>
<rule disabled="true">hello</rule>
<rule>hello</rule>
</rules>
It should return one node, but actually it returns nothing. If I use another one:
String xPathExpression =
"declare namespace xq='http://inti.notariado.org/indices' " +
"$this/xq:RULES/xq:RULE";
Then I get two nodes (which is correct). It seems to me a bug or a partial support
for XPath expressions. Or maybe I am using a bad syntax, anyone can help?
Thanks in advance !

Hi,
>
I tried to get a portion of an XML by using XPath Expressions as follows:
String xPathExpression =
"declare namespace xq='http://inti.notariado.org/indices' " +
"$this/xq:RULES/xq:RULE[@disabled]";
I think any XPath expressions which use [] are not supported in stand alone
version, but as this is not documented I could be wrong.
Regards
Arek

Using substring in the XPATH expression for Receiver Determination

Hello, I need a little help please. In my receiver determination, I have a condition and I need to do a "not like" check. Basically, if the first three positions of the source field does not start with a specific code, then I need to execute the condition. The condition editor does not support a "not like" operand, so I went to the XPATH expression editor. I tried to used the XPATH substring function to get the first three characters and then do a "not equal" operand, but it doesn't appear to work. There are not any runtime errors, but the condition is not executing. Any ideas on this? Does the XPATH expression support the substring function?

Hi Jesse,
Can you please explain what is the meaning of http:// in the statement
/p1:PRODUCT/MATNRhttp://not(substring(.,string-length(.) - 2) = '123')
Please explein, I am having same issue. It is not working here.In My case it is
/p1:ORDERS01/IDOC/E1EDP01/E1EDP19/IDTNR[http://not(starts-with(.,\"D\"))]
also tried with
/p1:ORDERS01/IDOC/E1EDP01/E1EDP19/IDTNR[http://not(starts-with(.,'D'))]
Thanks in advance!

Xpath expression in condition editor

Hi Expert Forum !
I have an xml structure like this :
<aaa>
<bbb>
 <ccc>
 </ccc>
</bbb>
</aaa>
In my condition editor (receiver determination) I want to refer to an element which is a child of node <ccc>. However, node ccc is not defined in my data type.
I can without any problems type my xpath expression manually but it doesn't seem to work though. As if it doesn't recognize node ccc if it's not in the data type. I know for 100% sure that node ccc will be in my inbound message.
Is it possible to reference an element in the condition editor - knowing that it will be present in the inbound message - even though it's not defined in the underlying data type ??
So why not just change the data type if I know <ccc> will be there? Well, data type is an external definition and I don't wanna edit it only to support an xpath expression in my rec. determination. If I can avoid it...
Message was edited by:
 Hans Hougaard
Message was edited by:
 Hans Hougaard

Managed to make xpath expression work. It is possible to reference an element which is not defined in the data type. My problem turned out to be a namespace issue..

ORA-31013: Invalid XPATH expression

Hi,
I am getting this error when i am trying to execute a sp which will do xml parsing.
What all i did is i have Oracle database with 9.2.0.1.0 version. The i hav ugraded the database to 9.2.0.6.0 using the Oracle patch. After upgrading the Oracle db to 9.2.0.6.0 i got the below error:
ORA-00600: internal error code,
Then i ran the catpatch.sql to get rid off this error. After running the catpatch.sql the above error gone but i got another error
ORA-31013: Invalid XPATH expression.
What does this mean. The sp is working fine before upgrading the Oracle db to 9.2.0.6.0. Is the patch upgrade corrupted any of the XML libraries or the 9.2.0.6.0 doesn't support the xml parsing or do i need to apply any patch for this.
Please suggest me ASAP since this error has been raised at cusotmer and i am in very much need of this.
The statement which i am using for parsing the xml file is
x.xml_data.extract('/x:recording/@x:ref').getStringVal() from xml_process;
where xml_process is a table of xml_type.
Thanks
Rao

Hello, There,
Recently we have moved some project from 9ir2 to 10gr2, some code which worked fine before but now got error.
any patch needed for this ? did anybody get the same issue before?
here're my environment:
1)9ir2:
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
PL/SQL Release 9.2.0.8.0 - Production
CORE 9.2.0.8.0 Production
TNS for Solaris: Version 9.2.0.8.0 - Production
NLSRTL Version 9.2.0.8.0 - Production
2) 10gr2:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
3) below are my test code which works fine in 9ir2 but got problem of "ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in..."
---===================TEST CODE START========================================
var xml_data clob;
begin
:xml_data:='<?xml version="1.0" encoding="UTF-8"?>
<MCCI_MT000100.Message xmlns="urn:hl7-org:v3" xmlns:voc="urn:hl7-org:v3/voc" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<id root="2.16.840.1.113883.4.3.57.100000126" extension="58212040112"/>
<creationTime value="20030620"/>
<versionId>v3r1b3</versionId>

<interactionId root="2.16.840.1.113883.4.3.57.100000126" extension="FICR_IN600201"/>
<processingCode code="P"/>
<processingModeCode code="T"/>

<acceptAckCode code="AL"/>

<applicationAckCode code="AL"/>
<communicationFunctionRcv>
<typeCode code="RCV"/>
<deviceRcv classCode="DEV" determinerCode="INSTANCE">
<id root="2.16.840.1.113883.4.3.57.100000126" extension="111111111"/>
<name use="L">BCE</name>
</deviceRcv>
</communicationFunctionRcv>
<communicationFunctionSnd>
<typeCode code="SND"/>
<deviceSnd>

<id root="2.16.840.1.113883.4.3.57.100000126" extension="100000126"/>
<name use="L">SampleProvider</name>
</deviceSnd>
</communicationFunctionSnd>
<controlActProcess>

<id root="2.16.840.1.113883.4.3.57.100000126" extension="111111112"/>
<effectiveTime value="20030620"/>
<subject>

<invoiceAdjudicationRequest>
<id root="2.16.840.1.113883.4.3.57.100000126" extension="58712040112"/>
<amt currency="CAD" value="200"/>
<reasonOf>

<justifiedInvoiceElementOrder>
<id extension="162" root="2.16.840.1.113883.4.3.57.100000126"/>
<code code="CP"/>

<netAmt currency="CAD" value="200"/>
<component>
<InvoiceElementDetail>
<id extension="162.1" root="2.16.840.1.113883.4.3.57.100000126"/>
<code code="240"/> 
<unitQuantity>
<numerator value="4" unit="h"/>
<denominator value="1" unit="each"/>
</unitQuantity>
<unitPriceAmt>
<numerator value="25" currency="CAD"/>
<denominator value="1" unit="1"/>
</unitPriceAmt>
<netAmt currency="CAD" value="100"/>
<reasonOf>
<justifiedAct>
<billableClinicalService>
<code code="240"/>


<effectiveTime value="20030620"/>
<performer>
<healthCareProvider id ="100000126"/>

</performer>
<location>
<participant>
<COCT_MT240000.ServiceDeliveryLocation>
<code code="12"/>

</COCT_MT240000.ServiceDeliveryLocation>
</participant>
</location>
</billableClinicalService>
</justifiedAct>
</reasonOf>
</InvoiceElementDetail>
</component>
<component>
<InvoiceElementDetail>
<id extension="162.2" root="2.16.840.1.113883.4.3.57.100000126"/>
<code code="240"/> 
<unitQuantity>
<numerator value="4" unit="h"/>
<denominator value="1" unit="each"/>
</unitQuantity>
<unitPriceAmt>
<numerator value="25" currency="CAD"/>
<denominator value="1" unit="1"/>
</unitPriceAmt>
<netAmt currency="CAD" value="100"/>
<reasonOf>
<justifiedAct>
<billableClinicalService>
<code code="240"/>


<effectiveTime value="20030620"/>
<performer>
<healthCareProvider id ="100000126"/>

</performer>
<location>
<participant>
<COCT_MT240000.ServiceDeliveryLocation>
<code code="12"/>

</COCT_MT240000.ServiceDeliveryLocation>
</participant>
</location>
</billableClinicalService>
</justifiedAct>
</reasonOf>
</InvoiceElementDetail>
</component>
<coverage>
<coveringCoverageEvent>
<id extension="1" root="2.16.840.1.113883.4.3.57.100000126"/>
<code code="event"/>
<beneficiary>
<coveredParty>

<id extension="00012345" root="2.16.840.1.113883.4.3.57.100000126"/>
<code code ="spouse"/>
<coveredParty>
<CoveredPartyAsPatientPerson>
<name>
<family>Jackson</family>
<given>Robyn</given>
</name>
<administrativeGenderCode code="F"/>
<birthTime value="19490601" />
<deceasedTime value="20030123" />
<multipleBirthInd value="false" />
<multipleBirthOrderNumber value="1" />
<addr>
<postalCode>L1W3V4</postalCode>
</addr>
</CoveredPartyAsPatientPerson>
</coveredParty>
</coveredParty>
</beneficiary>
<author>
<underwriter>

<id extension="10001" root="2.16.840.1.113883.4.3.57.100000126"/>
</underwriter>
</author>
</coveringCoverageEvent>
</coverage>
</justifiedInvoiceElementOrder>
</reasonOf>
</invoiceAdjudicationRequest>
</subject>
</controlActProcess>
<attentionLine type="AttentionLine" assoc="inboundRelationship">
<keyWordText code="BENEFITGR">Physio</keyWordText>
</attentionLine>
<attentionLine type="AttentionLine" assoc="inboundRelationship">
<keyWordText code="TPID">111111112</keyWordText>
</attentionLine>
</MCCI_MT000100.Message>
end;
select extract(xmltype(:xml_data),'/MCCI_MT000100.Message/communicationFunctionSnd/deviceSnd/id@extension','xmlns="urn:hl7-org:v3"').getStringVal() from dual;
--=====================TEST CODE END=======================================
in 9ir2 the result is:
SQL> select extract(xmltype(:xml_data),'/MCCI_MT000100.Message/communicationFunctionSnd/deviceSnd/id@extension','xmlns="urn:hl7-org:v3"').getStringVal(
) from dual ;
EXTRACT(XMLTYPE(:XML_DATA),'/MCCI_MT000100.MESSAGE/COMMUNICATIONFUNCTIONSND/DEVI
100000126
but in 10gr2, the error show as below:
SQL>
SQL> select extract(xmltype(:xml_data),'/MCCI_MT000100.Message/communicationFunctionSnd/deviceSnd/id@extension','xmlns="urn:hl7-org:v3"').getStringVal(
) from dual ;
select extract(xmltype(:xml_data),'/MCCI_MT000100.Message/communicationFunctionSnd/deviceSnd/id@extension','xmlns="urn:hl7-org:v3"').getStringVal() fro
m dual
ERROR at line 1:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in:
'/MCCI_MT000100.Message/communicationFunctionSnd/deviceSnd/id@extension'
thanks in advance!
richard

XPath expression failed to execute.

Hi Everybody ,
I am working AIA PIP 3.1 for JDE E1.I am facing some errors so that i can't proceed.
See the log errors as below:
javax.xml.ws.soap.SOAPFaultException: XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is ora:processXSLT('xsl/Xform_BillOfMaterialsListABM_to_BillOfMaterialsListAXML.xsl',bpws:getVariableData('InitialLoadBillOfMaterialsListReqMsg','InitialLoadBillOfMaterialsList'),bpws:getVariableData('Parameters')). The XPath expression failed to execute; the reason was: oracle.fabric.common.xml.xpath.XPathFunctionException: javax.xml.transform.TransformerException: oramds:/deployed-composites/default/InitialLoadBillOfMaterialsListJDEE1toAgileImpl_rev1.0/xsl/Xform_BillOfMaterialsListABM_to_BillOfMaterialsListAXML.xsl<Line 18, Column 271>: XML-22044: (Error) Extension function error: Error invoking 'lookupXRef':'oracle.tip.xref.exception.RepositoryException: lookup could not find values in column name "AGILE_01" for table name "oramds:/apps/AIAMetaData/xref/ITEM_ITEMID.xref" using reference column name "JDEE1_01" and reference value "731882::M30" Please ensure lookup criteria has a match.'. Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
Please reply me ASAP,
Waiting for your response.....
Regards
Jyoti Nayak

Hi,
Ya i checked the data for same table,but i didn't get any XREF related information in xref_data table.
Did you mean that, data should already present under AIAFPINST_XREF.Probably xref is meant for storing dynamic value.
Please check the above error and reply me soon.
With Regards
Jyoti Nayak

Does SOA BPEL 11.1.7.0 support XPath 2.0 in XSLT mapping?

Dear Oracle support,
I am using SOA Suite 11.1.1.7.0 (local development) and 11.1.1.6.0 (in production, but will upgrade to 7). I came to the requirements need to do very complicated mapping using XSLT in BPEL. I would like to use some features of XPath 2.0.
Does SOA 11.1.1.6.0 or 11.1.1.7.0 have supported XPath 2.0? If not yet, is there any plan to support in the future?
Thank you in advance for your response,
Alena Li

Hi Alena Li,
Firstly, this is not Oracle support, this is Oracle forums...
https://wikis.oracle.com/display/Forums/Forums+FAQ
SOA supports *some* features of XPath 2.0 in XSLT, the infrastructure also supports XSLT 2.0, but JDEV mapper does not...
Check docs here...
http://docs.oracle.com/cd/E28280_01/dev.1111/e10224/bp_appx_functs.htm#SOASE2127
Cheers,
Vlad

[Error ORABPEL-10039]: invalid xpath expression - array processing

hi,
I am trying to process multiple xml elements
<assign name="setinsideattributes">
<copy>
<from expression="ora:getElement('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500['bpws:getVariableData('iterator')']/ns2:HEADER/ns2:SSN')"/>
<to variable="ssn"/>
</copy>
</assign>
where iterator is a index variable .
I am getting into this error .
Error(48):
[Error ORABPEL-10039]: invalid xpath expression
[Description]: in line 48 of "D:\OraBPELPM_1\integration\jdev\jdev\mywork\may10-workspace\multixm-catch\multixm-catch.bpel", xpath expression "ora:getElement('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500['bpws:getVariableData('iterator')']/ns2:HEADER/ns2:SSN')" specified in <from> is not valid, because XPath query syntax error.
Syntax error while parsing xpath expression "ora:getElement('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500['bpws:getVariableData('iterator')']/ns2:HEADER/ns2:SSN')", at position "77" the exception is Expected: ).
Please verify the xpath query "ora:getElement('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500['bpws:getVariableData('iterator')']/ns2:HEADER/ns2:SSN')" which is defined in BPEL process.
[Potential fix]: Please make sure the expression is valid.
any information on how to fix this .
thanks in advance

check out this note here
http://clemensblog.blogspot.com/2006/03/bpel-looping-over-arrays-collections.html
hth clemens

XPath Expression

Hey Guys...
Currently I am working on one Xpath expression issue..as described below;
Its a File to Idoc scenario ...where in I need to check the two Item level nodes and based on that need to produce the target Idoc. and my souce structure look like this....
DT_Input
       Header ---    1 to 1
             H1
             H2
             H3
       Item -
     0 - Unbounded
          Item_1
          Item_2
          Item_3
Query : If the Item_1 and Item_3 are not equal AND Item_1 not equal to blank ...then I need to produce the target Idoc otherwise not!
Can you please help me out!!!
Cheers.,
S

You could create an advance user defined function.
fed your function with the 3 values (Item_1 and Item3).
Inside the function, check the values of Item_1 and Item_3 nodes.
What is the result of your query? I mean, if your query is meet, Which value do you want to populate in your IDOC?
You should use this sentence: result.addValue(a[0]). It is supposed a is the value returned by the funcion.
If you don`t want create the node in the IDOC, use this other one: result.addValue(ResultListCC).
Regards,
Carlos

XPATH-expressions and namespaces

I have a xml-file for testing my xpath expression, like this:
<a>
 
 <c>aaa</c>
 <d>
 <e>111</e>
 </d>
 
 
 <c>bbb</c>
 <d>
 <e>222</e>
 </d>
 
 
 <c>ccc</c>
 <d>
 <e>333</e>
 </d>
 What I want is to get the value of element 'e', based on a check on what the value of element 'c' is. I alway know the value of element 'c'.
I solve this by using this xpath-expression in my xsl-file:
<xsl:variable name="xpathTest" select="//e[../preceding-sibling::c = 'bbb']" />This expression should return '222', and it works!!!
But, when I use the another xml-file with a similar structure, with namespaces, like this:
<body xsi:type="fkpsoap:FKPSOAPOperationResponse">
 <FKPSOAPOperationResponse>
 <fkpsoap_1:fkrdk178_output_data>
 <fkpsoap_1:fkrdk178_list_cust_information>
 <fkpsoap_1:fkrdk178_list_customerinfo>
 <fkpsoap_1:fkrdk178_list_variable_code> aaa </fkpsoap_1:fkrdk178_list_variable_code>
 <fkpsoap_1:fkrdk178_list_value_name>
 <fkpsoap_1:fkrdk178_list_value_text> 111 </fkpsoap_1:fkrdk178_list_value_text>
 </fkpsoap_1:fkrdk178_list_customerinfo>
 <fkpsoap_1:fkrdk178_list_customerinfo>
 <fkpsoap_1:fkrdk178_list_variable_code> bbb </fkpsoap_1:fkrdk178_list_variable_code>
 <fkpsoap_1:fkrdk178_list_value_name>
 <fkpsoap_1:fkrdk178_list_value_text> 222 </fkpsoap_1:fkrdk178_list_value_text>
 </fkpsoap_1:fkrdk178_list_customerinfo>
 <fkpsoap_1:fkrdk178_list_customerinfo>
 <fkpsoap_1:fkrdk178_list_variable_code> ccc </fkpsoap_1:fkrdk178_list_variable_code>
 <fkpsoap_1:fkrdk178_list_value_name>
 <fkpsoap_1:fkrdk178_list_value_text> 333 </fkpsoap_1:fkrdk178_list_value_text>
 </fkpsoap_1:fkrdk178_list_customerinfo>
 </fkpsoap_1:fkrdk178_list_cust_information>
 </fkpsoap_1:fkrdk178_output_data>
 </FKPSOAPOperationResponse>
</body>Then the xpath-expression does not work!
I can easily extract the value of the element similar to the element 'e' in my test-file, but then I will always get the value from the first occurance of 'e', which is '111'.
Can anyone help me with this?

Most APIs which let you create XPath objects allow you to create a namespace context and attach it to the XPath object. Your API most likely does too, whatever it is. Then you would just use the prefixes which the namespace context describes in your XPath expression.
(This namespace context generally maps prefixes to namespace URIs. Remember that the namespace URI is really what the XPath is looking for and the prefix is just a short cut for you to use.)

Help Page Error: Using XPath expressions as list indexes and map keys

The help page says for maps to use the XPath expression
/process_data/mapvar[@id='/process_data/@stringvar']
But in reality for things to work you have to omit the quotations.

thanks a lot for your help..
there are total 162 records in the v$open_cursor for that user.
among that the open cursor is only 4 and open-recursive cursor is only 6 for that user.
in my session i am executing only the renaming of the constraints and nothing more.
When i have queried the v$open_cursor for cursor_type='OPEN' for all the users, then i got that it has exceeded the value of open_cursors parameter.
So how can i resolve that....

Supported XPath expression

Similar Messages

Maybe you are looking for