Supporting more than 256 connections

I have an application requiring supporting more than 256 wireless connections at a single location. How can I do this, while using a single SSID? Can this be done using a combination of Linksys routers and access points?

Well the Wireless can Support Upto 32 Wireless client at a time, and Remaining will be the Wired Computer. So if you have 256 Wireless Client at your location then i think you required 7 AP or the Range Expander at your Location along with the Wireless Router.

Similar Messages

Can the AirPort Extreme support more than one printer at a time?

can the AirPort Extreme support more than one USB printer at a time if it is connected to a USB Hub?

can the AirPort Extreme support more than one USB printer at a time if it is connected to a USB Hub?
Yes.....IF.....you use a powered USB hub.
I have had 3 printers connected at the same time in the past and assume that more would work as long you have a powered hub to support the number of ports that you need.

Will PC suite support more than one phone?

Nokia PC suite v6.41.6.
Windows XP Home v5.1 Service Pack 2
My wife has a Nokia 6681 and it runs fine on the above settings with PC Suite. We have the official Nokia USB cable.
My new 3220 isn't being recognised, however, and I was wondering if it is possible to support multiple phones from the PC Suite or whether I should just give up. I'm quite happy to upgrade to PC Suite v.7, but only if there's a good chance it'll work.
I've not been able to find a way anywhere of downloading a driver for a single phone or anything like that.
Thanks.

Nokia PC Suite supports more than 100 Nokia phones. I would recommend updating to version 6.70.22, PC Suite 6.41 is already quite old.
The main thing is that Nokia 6681 requires DKU-2(or CA-53) cable BUT Nokia 3220 requires DKU-5 (or CA-42) cable.
They both look the same and you can physically connect both to those phones, but they require different cable.
But PC Suite will work nicely with both once you have the right cable.
I strongly recommend CA-42, Nokia original, Nokia PC Suite includes cable drivers for that cable, so no separate drivers are needed.
There are numerous unofficial CA-42 cables out there, but some of them are just dead.Message Edited by manta on 12-Jan-2006
08:04 PM

Can SPA9000 Support More Than 16 SIP Users

Hi
Can SPA9000 Supports more than 16 SIP Connections. If yes then how ???
please give me complete detail because i m going to employ 100 SIP users on SPA9000 but i have found on net that it only supports 4 SIP users at a time and 16 Users by purchasing a license of 300$
So please help me regarding this matter
my email address is [email protected]
waiting for your kind response....

If the phones were Linksys SPA9XX phones the SPA9000 configured them for you. If you have an SPA9000 on a network and plug one of the SPA9XX phones into the same network it will find the SPA9000 and auto configure. If these are the first 2 phones the line displays are most likely showing one phone as extension 100 and the other as 101.
No problem, hope this helps.

Displaying text more than 256 in ALV report

Hi experts,
                 I have problem while displaying text field in ALV report which has more than 256 characters.
I'm using CL_SALV_TABLE for displaying alv.while concatenating my internal table holding all the text.but at the time of displying the report it's only displaying 256 characters.
           Can anyone guide me how to display more than 256 characters in ALV output using CL_SALV_TABLE.

Hi,
Please find the below code.
TRY.
      gr_column ?= gr_columns->get_column( columnname = 'MATNR' ).
      gr_column->set_output_length( '300' ).
    CATCH cx_salv_not_found.
    Message : Column definition problem
      MESSAGE e075().
ENDTRY.
Edited by: Archana.T on Jun 16, 2010 1:24 PM

ORA-24335 - cannot support more than 1000 columns - How to solve this?

Hi,
I got error message 'ORA-24335 - cannot support more than 1000 columns ' when i try to insert x no of rows for a table with following code:
INSERT ALL
INTO tableA Values ('A', 'B', 'C', 1, 2, 3)
INTO tableA Values ('D', 'E', 'F', 4, 5, 6)
INTO tableA Values ('G', 'H', 'I', 7, 8, 9)
SELECT *
FROM DUAL
How to solve above?
What does it really mean? It's not as easy as if my table has 10 columns than I can't insert more than 100 rows (1000 columns divided with 10 columns = maximun 100 rows to insert), or?
Is there a better/more appropriate way to do insert many rows?
Should I do my inserts with an OracleTransaction (My application is developed with C# and asp.net), as ~follows
BEGIN
INSERT INTO tableA Values ('A', 'B', 'C', 1, 2, 3)
INSERT INTO tableA Values ('D', 'E', 'F', 4, 5, 6)
INSERT INTO tableA Values ('G', 'H', 'I', 7, 8, 9)
COMMIT
END
Thx in advance!
Edited by: user8819407 on 2010-mar-07 15:40

Hi,
So how did you solve the problem? Can you please give an example?
I have the same problem inserting over 1000 values into my Oracle DB. The table only has 51 columns but to speed up the insert command, I use bulk inserts via insert all command. I need to insert 100 rows at a time for a total of 5100 values.
Example:
SQLCmd = INSERT ALL INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
SELECT 1 FROM DUAL
SQLVals = 1 22C38299 80700334 04-19-2012 13:55:33 mm-dd-yyyy hh24:mi:ss MCC93000 04/19/2012 13:55:42 mm-dd-yyyy hh24:mi:ss 12 4 0.792191 23 1 0.00 -113.50 13.48 9 1 9
1 36PR7038 8070EDC2 04-19-2012 12:24:35 mm-dd-yyyy hh24:mi:ss MCC60360 04/19/2012 12:24:41 mm-dd-yyyy hh24:mi:ss 7 4 0.757501 3 2 13.88 -114.80 14.06 5 1 6
1 42C63512 8050166F 04-19-2012 16:02:50 mm-dd-yyyy hh24:mi:ss MCC52420 04/19/2012 16:02:57 mm-dd-yyyy hh24:mi:ss 10 4 0.778471 8 1 0.00 -122.30 13.05 8 1 7
1 33MR3076 80803E75 04-19-2012 13:13:16 mm-dd-yyyy hh24:mi:ss MCC60330 04/19/2012 13:13:22 mm-dd-yyyy hh24:mi:ss 13 5 0.636721 28 3 0.00 -122.19 0.70 8 1 6
Then I call: &DBInsert($sqlCmd, @sqlVals);
This is the error I get: ORA-24335: cannot support more than 1000 columns.
I need to insert about 879,500 rows (51 cols per row). The values I read from a text file in sets of about 48,000 and put them into a hash. I tried inserting one row at a time, but it takes too long, about 28 hrs! Then, I tried the bulk update with only 6 rows and the total time was about 25 minutes. Which is acceptable to us.
Thanks!

Using more than 256 colors in 3D graph?

Hi,
I am using 3D surface plot in Labview 6.i and I would like to know if it is
possible to use more than 256 colors (in the Z-scale).
Actually I would like to have very smooth change in the color map and this
could be possible if we could use 16bit color instead of 8bit.
Thanks.

Hi nweiss,
I'm not sure whether or not you received my reply to your last post; in case you haven't, here's the link:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000E94C0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
Thanks,
Ted F.

Will new Intel "Conroe" chip in Mac towers support more than 4 gig of RAM?

Hi all,
long time no speak
Question:
Will the new Intel "Conroe" chip in the upcoming Mac towers support more than 4 gig of RAM?
I score Orchestral and since the new VSL library is completely 24bit i need to at least be able to adress 8 gig of RAM (16 gig would be better
To APPLE: Guys please be aware that us Pro Users were always eager to adress those 8 gig of RAM in our G5s, but were dissapointed in the fact that Logic FCP etc, were never turned into 64 bit apps.....so adressing 4 gig was it for us........
I guess another way to ask the same question would be whether "Conroe" is 64 bit, as that is what is required to adress more than 4 gig of RAM.....
thanx,
SvK

Will the new Intel "Conroe" chip in the upcoming Mac
towers support more than 4 gig of RAM?
From what I've read Conroe will be 64-bit. A google search of "64-bit conroe" will give you a few sources and more info.
To APPLE: Guys please be aware that us Pro Users were
always eager to adress those 8 gig of RAM in our G5s,
but were dissapointed in the fact that Logic FCP etc,
were never turned into 64 bit apps.....so adressing 4
gig was it for us........
It doesn't need to be a 64-bit application. It just needs to have 64-bit memory addressing. Here is a good article if you're interested.
http://developer.apple.com/business/macmarket/mathematica.html
I don't have any experince with VSL, but I did have a quick experience with Kontakt 2 (I sold it). The Kontakt 2 forum has a post from the moderator that explains some issues around Kontakt's memory issues.
http://www.nativeinstruments.de/forum_us/showthread.php?t=31572
"furthermore, even Kontakt 2 and related products will not get 64 bit support any time soon since this would require a complete rewrite of the engine - this is the last thing we want at this point! products based on Kontakt 2 are Akoustik Piano and Bandstand."
The complete rewrite of the audio engine might be the general issue with utilizing more than 4Gb of memory. But, I am not sure...I think there is another issue with how the OS handles memory usage.

How to make iTunes support more than just one harddrive

The title of this topic says it all: How do I make iTunes support more than just one harddrive? I cannot afford to buy a really huge drive just because iTunes doesn't support more than one.
There must be a way around this! Anyone?

I sure hope so. I run iTunes on an iBook G4 with limited space. I've got about 15gigs of music on an external harddrive. I only use the harddrive at home so I like to keep a handful of albums with me on the lappy. There should be some way to designate a primary folder on the laptop for imports, and a secondary (external or whatever) for the bulk of the library. Maybe some nifty way to do quick transfers between them within iTunes. Like a relocate function.
Say I want the new death cab for cutie album on the laptop this week, but next week I want to swap it out with something new that comes out. It would be nice to highlight an album and select "transfer to secondary" so that iTunes can move the files for you, keep them organized, and keep track of them.
That doesn't sound so difficult...

How to get more than 256 bytes data

hello.
I use Schlumberger 32K Card�iJava Card 2.1�j.
Please tell me how to get more than 256 bytes data from the applet in the card!!
According to JCRE specification, need to use Get Response Command.
What is Get Response command?
Do I have to write processing of Get Response command to an applet?
Or JCRE processes Get Response command?
If knows, please tell me about!!
Thanks.

Thanks for your response!!
I understand that I have to write processing of Get Response command to an applet.
But case of Schlumberger 32K card, when host send Get Response command to an applet, card reply 6F-00!?
I'm investigating now, and it seems that response is returned before applet processes Get Response command(CLA = 00, INS = C0).
Do JCRE perform the process of Get Response command?

Can't get pan to use more than 4 connections/server

My ISP has a news service that I users can access with a max of 20 connections per user.
I've been trying to use pan to download some file from this server, but I can't get it to use more than 4 connections.
On the pan web site it says to go to the NNTP menu,but I just can't find it.
What's up? Am I blind?

Have you overriden the doPost() method in ViewFormData? If not I think that you get this error message as a default
doGet() and doPost() should do the same thing so have one call the other

Does Premiere Elements 10 support more than 25 chapter markers?

Can anyone tell me if Version 10 supports more than 25 chapter markers? If not, is there an easy work-around other than using menus? Thanks.

If you bought PrE within 30-days, then Adobe offers a money-back return. Do not know how that would work with the bundle, and you might need to return them both, then buy just PSE. If you bought over 30 days ago, there is probably no direct recourse, but you might check with Adobe C/S (Customer Service), just in case. As they would be who you need to deal with, for a 30-day return, you can ask for full details.
I have yet to hear why the 25 Chapter limitation was imposed. Maybe a kind Adobe employee can comment? The old 99 limit was due to the allowable VTS's in the DVD-specs. That was fixed, very long ago, and I do not know of a way around it, even with professional authoring applications.
Good luck,
Hunt

More than one connection to DB

Hello there,
I need to manage more than one connection to DB at the same time.
Each one of my pages needs to refrence to another DB Schema.
I'm working with JDEV 10.1.3 based on ADF,JSP.
Thanks.

Or are you saying you want to dynamically log off and log on to different schemas/database connections?
Regards
Grant

Can the sony handycam dcr-hc30 support more than the original 512mb memory? Thanks.

Can the sony handycam dcr-hc30 support more than the original 512mb memory? Thanks.

According to this compatibility chart: http://esupport.sony.com/perl/support-info.pl?&info_id=11 the DCR-HC30 can use the following cards:Memory Stick Duo Pro - 1 GB, 2 GB, and 4GBMark 2 Memory Stick Duo Pro - 1 GB, 2 GB, and 4GB.You might want to read the chart to make sure I was reading it correctly.

Will iOS 5 support more than 11 home screen pages ?? Because folders made my phone slower

Will iOS 5 support more than 11 home screen pages ??
Hope to see that in the new iOS

As we're all users like you, we have no more way of knowing the features than you. All we know is what's been released thus far on Apple's website.

Supporting more than 256 connections

Similar Messages

Maybe you are looking for