Suppose the loads are running in BW, but the BW & System Times are differe
BW system time is greater than the R/3 system, how we can ensure wether the loads are uploaded into BW System?
Hi...........
Look..............While loading data From R/3 to BW............first Extraction will start...........ie the Extraction Job..............if u copy the Request no from the Header tab of the IP Monitor...............then go to the Source System ..........SM37 >> Put the Request no with BI as prefix..............there u can see the Status of the Extraction Job...........
Now if u r in BW............then U hav different options.......
PSA and Data Targets/InfoObjects in Parallel >> A process is started to write the data from this data packet into the PSA for each data package. If the data is successfully updated in the PSA, a second parallel process is started. In this process, the transfer rules are used for the package data records, data is adopted by the communication structure, and it is finally written to the data targets. Posting of the data occurs in parallel by packet...................This method is used to update data into the PSA and the data targets with a high level of performance. The BW system receives the data from the source system, writes it to the PSA, and starts the update immediately and in parallel into the corresponding data target............
In this case Extraction and Loading to the Target will complete parallely.....................when the Technical status will be green..and the Extraction node and the Processing node both will be green............at that time u will understand that load got completed..............
PSA and Then into Data Target/InfoObject >>A process that writes the package to the PSA table is started for each data package. When the data has been successfully updated to the PSA, the same process then writes the data to the data targets. Posting of the data occurs in serial by packet.
In This case first the Extraction Job will get completed.............ie the Extraction node will be Green..........at that time Data Packets will be Yellow...........After some time all data packets will green..............Technical status will be green.along with the data paclets..............it means load completed............
Only PSA >> Using this method, data is written to the PSA and is not updated any further. In this two seperate Background JObs will be created...............First the Extraction Job will completed.............then the Technical status will be green............then a new JOb will Start to push from PSA to data target............After Loading till PSA...............if u go to the Status tab..............there u will find Processs Manually tab............if u click there update to Target will start..........then Tecxhnical status will again be yellow................after update to the Target get completed....................Technical status will aagain be Green.............
Now if u r in BI 7.0...................Then infopackage will loaddata till PSA.............u can monitor the Extraction job............Then u hav to Excute DTP to load from PSA to the target..............In the DTP monitor u will find the DTP request............in the SM#& in BI side...............u can monitor this Job.............
Hope this helps.........
Regards,
Debjani........
Similar Messages
-
I've even tried only having the iPad mini on the router but that's not even worked. Safari works but the apps are the worst and its what I use most.
Hi Friends,
I found the solution for this problem (because I faced it too): go to Settings>>General>>Reset>>Reset Internet Settings (the third option in IOS 6).
Five minutes later my iPhone 4S works fine again.
If the issue persists, forget the wifi connection, then sign in again.
Hope it helps -
How can I delete apps off of my iPhone 4? I know the apps will begin to shake, but the "X" doesn't appear like it's suppose to. Help, please!!!!
What apps are you trying to delete? Apps that come on the phones cannot be deleted in this fashion. Only apps you purchase from the app store can be deleted.
-
I have a problem with my Time Capsule. The message I get is: Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 111.27 GB but only 42.1 GB are available. As a result, my backups are no longer running. My umderstanding was that the Time Capsule would automatically delete old backups to make space. Can anyone help me figure out how to get my backups to run again?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting. -
I am getting the error ¨This backup is too large for the backup disk. The backup requires 1.42 TB but only 998.49 GB are available¨ when I try to do a time machine backup. I have a Retina Macbook Pro and am only using 250 GB on the internal drive. My 1TB external drive that I am trying to use has been complete reformated (case sensitive journaled) and therefore completely empty. Any ideas why time machine is saying my drive has 1.14 TB when its capacity is no where near that?
Well, at this point I might recommend that you reboot your MacBook Pro while simultaneously holding down the Command - R keys and booting into the Lion Recovery Partition. There I would enter the "Disk Uility", highlight your Mac HD in the left hand column to select it and run "Repair Disk", and then run "Repair Permissions" twice. They may resolve the hard drive's confusion in Time Machine.
Hope this helps -
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck! -
I am trying to log onto a Mac Mini I haven't used in awhile and I forgot the password. I am trying to reset the password with my apple ID but the computer keeps saying the Apple ID and the password are incorrect whenever I know they are, as I am using the exact same ID right now.
I have switched my password in the past, so my theory is my mac mini thinks that my password has not changed and it will not update because The Wi-Fi password has also changed so it cannot connect to any servers...Does that sound like I am on the right track?
Is there a way to update my Wi-Fi password (saved into the computer) without logging on?If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. -
I have a 15 inch mac book pro running osx 10.5.8. I recently moved to Florida and switched to Comcast (the only option). Now when I access my bank website, I can get past the login to my account page but the data is permanently unavailable. The bank says no one else has this problem. Everything is up to date as far as software is concerned. . .I just update anything that comes up. I have not had this problem with this computer anywhere else and I am not having a problem with any other website. I have the problem with both Safari and Google Chrome.
Harden your Mac against malware attacks
-
I have my boyfriend's apple ID and password, how do I check what apps he has on his phone? ( not all the apps that he had downloaded, but the ones that are actually on his phone). And How can I remotely download apps to his phone if I have his ID and PW?
Thank you so muchIf you want seperate accounts for managing apps and purchasing content, basically yes, you need two account and would need to repurchase. However, if you just want seperate ID for iMessgae, icloud and such, you can do that and still continue sharing the same Id for apps and itunes.
-
Documents are appearing in J1INMIS but the same are not appring in Form 26Q
Hi,
Documents are appearing in J1INMIS but the same are not appearing in Consolidated Form 26Q.(J1INQEFILE).
Can anyone give me the solution for above.
Thanks & Regards,
reddyHi Reddy,
So you have completed the challan & update of Bank challan steps?
I implemented CIN in India in Summer 2009 & we found a number of issues & bugs with the standard code, particularly around the TDS process. During the J1INMIS processing we found that a number of tables were not being updated (Challan update) & we had to copy & fix the code ourselves as J1INMIS (so I'm lead to believe) is not supported by SAP any longer.
Good luck!
Regards,
Steve -
Consistent gets are reduced by 50% but the query taking more elapsed time.
Hi All,
While tuning a application my consistent gets are reduced by 50% but the query is still taking the same time.
In a Warehouse env data is coming from With clause that is having some 40000 rows .Then these 40K rows are joined to a table that is having 2 Billion records having indexes on primary key and date column(bitmap)indexes .
It is using Hash Joining method.Try forcing a hash join, if possible:
http://dba-oracle.com/tips_oracle_hash_joins.htm
Can you post the plans?
http://www.dba-oracle.com/plsql/t_plsql_plans.htm -
Consistent gets are reduced by 50% but the query is still taking the same t
Hi ,
I am tuning a query in DWH env using a WITH clause .Doing that my consistent gets are reduced by 50% but the elapsed time in increased.
In that one 40000 rows are coming from WITH clause and joined with a table having 250000000 rows joined through Hash join.
can anybody help me out in this issue.
Thanx
NitinNitinMishra wrote:
Hi ,
I am tuning a query in DWH env using a WITH clause .Doing that my consistent gets are reduced by 50% but the elapsed time in increased.Unusual! Normally time goes, down when system resources do - but not always as you are seeing :(. Last time I saw something like this the reads had gone down but the CPU usage had gone up. You can get CPU usage from V$SQL.
Can you post the query, the execution plan, and statistics - both before and after the tuning? -
Firefox5 is not showing BBC iPlayer Video & Radio.
Other browsers are all fine(Safari,IE,Chrome)
The iPlayer webpage is all there but the flash video player is black. The OS is MS Windows XP Professional 32-bit SP3.Also, when the flash video does not show up it displays the error that I do not have the current flash player. The problem is that I do have the current flash player that actually plays flash from another section of the website.
Forgot to add that earlier. -
CAn anyone make some suggestions regarding this message. 'This backup is too large for the backup disk. The backup requires 1.38 TB but only 327.08 GB are available.'
See #C4 in this terrific document provided by expert Pondini.
http://web.me.com/pondini/Time_Machine/Troubleshooting.html -
The App Tabs are a great function but mine vanish each time I close Firefox. Why? Really just makes them act just like a regular tab then.
Make sure that you use Firefox > Quit Firefox to close the window with the App Tabs and the Firefox application.<br />
If you only close the window and not Firefox then you need to use History > Recently Closed Windows.
Maybe you are looking for
-
How do I count specific, smaller groups of information in one large table?
Hello all, I have a feeling the answer to this is right under my nose, but somehow, it is evading me. I would like to be able to count how many photos are in any specific gallery. Why? Well, on my TOC page, I thought it would be cool to show the use
-
When you take a snapshot of the desk top where is it saved?
When you press Control-Command-3 for a snapshot where can I find it?
-
Hello there folks, I have a portfolio about my work as a architectural technologist at http://www.simonenevoldsen.dk. To build up this website I have been using iWeb and comes the problem! I have used the blog version of iWeb and because that when yo
-
I wish to maintain a "collection" of produced digital video clips that can be web published. Say, on the left side of web page screen, is the video clip field. On the right side, are fields to be filled in by user. (Data to be stored in database). Ba
-
I am new and need help. I have adobe 7.0 professional and I have recently upgraded to adobe 9.0 reader. I can not save pdf files. I no longer have the diskette to click on and save a pdf file.