Suppresion of NON-ZERO numbers in Key Figures

Dear All,
How do we suppress Non - zero values for multiple Key figures in Query Designer? Please suggest some method.
I have tried conditions and it does not work for individual cells....It works for an entire row.....
Thanks,
Naveen

But will that suppress the zeros too?? I want the Zero's to be displayed...only non-zeros to be suppressed....Please let me know if this is what it does...
I dont see that option at all...in the properties
thanks for your help
Edited by: Naveen_Purdue on Sep 22, 2010 7:05 PM

Similar Messages

Aggregates on Non-cumulative InfoCubes, stock key figures, stock, stocks,

Hi..Guru's
Please let me know if anybody has created aggregates on Non-Cumulative Cubes or key figure (i.e. 0IC_C03 Inventory Management.)
I am facing the problem of performance related at the time of execution of query in 0IC_C03.( runtime dump )
I have tried lot on to create aggregate by using proposal from query and other options. But its not working or using that aggr by query.
Can somebody tell me about any sample aggr. which they are using on 0ic_c03.
Or any tool to get better performance to execute query of the said cube.
One more clarification req that what is Move the Marker pointer for stock calculation. I have compressed only two inital data loading req. should I compress the all req in cube (Regularly)
If so there would be any option to get req compress automatically after successfully load in data target.
We are using all three data sources 2lis_03_bx,bf & um for the same.
Regards,
Navin

Hi,
Definately the compression has lot of effect on the quey execution time for Inventory cubes than other cumulated cubes.
So Do compression reqularly, once you feel that the deletion of request is not needed any more.
And ,If the query do not has calday characterstic and need only month characterstic ,use Snap shot Info cube(which is mentioned and procedure is given in How to paper) and divert the month wise(and higher granularity on time characterstic ,like quarter & year) queries to this cube.
And, the percentage of improvement in qury execution time in case of aggregates is less for non cumulated cubes when compared to other normal(cumulated) cubes. But still there is improvement in using aggregates.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Non Cumulative and Cumulative Key Figure

Hi all:
Can anyone clarify difference between Non cumulative KF and Cumulative KF.What is the use of these two and when we go for this.?
Please send me if any docs [email protected]
Rgds
MSK
Note: Points to be reward.

Hi,
Check this Link:
http://help.sap.com/saphelp_bw32/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
take a look to https://websmp105.sap-ag.de/bw -> SAP BW InfoIndex -> Non-cumulatives
here you can find:
Non-Cumulative Values 3.x (pdf)
Also Check this:
Cumilative and non Cumilative
Non cumulitive Key figures
Bye
R.Ravi

Multiprovider displays zero value for Key figure

HI,
Multiprovider contains 3 cubes, in which one keyfigure (YDAYS) presents in two cubes and assigned to multiprovider from two cubes. But iam getting zero value in the multiprovider level. But in the cube level getting the data. This problem iam getting in testing system.
When i compated Develoment system and Testing system everything is correct, mapping, assignment .
Any ideas what might be the problem
Thanks / Venkata

Check the report to see if it has any filters that is available in only one of the infoproviders. if thats the case then move the filter and make it restricted.
Use RSRT to see which infoproviders are being hit when you execute the query. Look in detail. I had the same problem once and careful investigation revealed a filter that was at the report level instead of kf restriction level.

Concepts: cumulative / non-cumulative key figures. Differences.

Hi, could you help me to understand cumulative / non-cumulative key figures concepts ? When use it? Differences? Performance?
I appreciate you if you spend few rows without link to massive web documentation.
Thanks in advance!
Bye!
Ferdinando

Have a look at this:
Non Cumulative and Cumulative Key Figure
Hope it helps.
Regards

Non-zero rule for figuring out the interior of a shape

I need help in understanding how the non-zero rule works in figuring out the interior of a shape? Can anybody give a simple example? The winding rule is set by the PathIterator...WIND_NON_ZERO.

Do you have a Java question?
We can't really answer general questions like that, except to point you towards google.
If you have some Java code you're working with, post an [SSCCE |http://sscce.org] that demonstrates where you're stuck, and be specific with your questions.

Cummulative key figures

Hi experts. please explain me what are cummulative KFs and how to use them?
regards
rajesh

Dear Rajesh
Flow/non-cumulative value
You can select the key figure as a cumulative value. Values for this key figure have to be posted in each time unit, for which values for this key figure are to be reported.
Non-cumulative with non-cumulative change
The key figure is a non-cumulative. You have to enter a key figure that represents the non-cumulative change of the non-cumulative value. There do not have to be values for this key figure in every time unit. For the non-cumulative key figure, values are only stored for selected times (markers). The values for the remaining times are calculated from the value in a marker and the intermediary non-cumulative changes.
Non-Cumulative with inflow and outflow
The key figure is a non-cumulative. You have to specify two key figures that represent the inflow and outflow of a non-cumulative value.
Note
For non-cumulatives with non-cumulative change, or inflow and outflow, the two key figures themselves are not allowed to be non-cumulative values, but must represent cumulative values. They must be the same type (for example, amount, and quantity) as the non-cumulative value.
Aggregation Behavior of Non- Cumulative Key Figures Locate the document in its SAP Library structure
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/content.htm
The non-cumulative key figures are used in the Inventory cube.
Assign Points if useful
Regards
Venkata Devaraj !!!

Do Any One Can explain How to Create Non-Summing Key Figure??

Hi Guru's,
Can Any buddy explain how to create a Non-Summing Key Figure?
Details:
I am creating Three Key Figures, One of them are Ticket Number's.
Ticket Number supposed to be a Characteristic, but I was asked to do it as a Key Figure.
If I create it as normal KF, then the Ticket Numbers will be summed, isn't it?
Your Help much appreciated.
Regards,
BH

Hi,
If you are going to use that keyfigure in ODS, in Update rule you are having the option 'OVERWRITE' .
choose Overwrite for that keyfigure instead of 'Addition'.
rgrds,
v.sen.

Key Figure value in Cube showing with extra zeros

Loaded data into the cube. When I display the result
Key figure values are showing with 2 extra zeroes and Quantity value shaowing with 3 extra zeroes.
Original value
Price, Quantity, Sales Rev
2     1     2
3     2     6
When display value from cube
Price, Quantity, Sales Rev
2,00     1,000     2,00
3,00     2,000     6,00
Why zero is showing? How can I display the original value? In PSA, values are showing correctly.
Thanks,

Hi,
These are the zeroes after the decimal places. this is the property of the key figure.
In your report you can change the display value. In the display properties of the Key figure under the number of decimal places make it as 0. This will remove the zeroes.
Hope it helps.
Regards,
Gaurav
Edited by: Gaurav Kothari on Oct 16, 2008 10:35 AM

Purpose of Non Cumulative key figures

Whatu2019s the purpose of Non Cumulative key figures?

Hi....
There is an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Also Check..........
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
Re: Non-Cumulative keyfigure example
Hope this helps.....
Regards,
Debjani........
Edited by: Debjani Mukherjee on Oct 27, 2008 3:46 AM

Problem with Non-cumulative key figure.

Hi all,
I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. This cube is defined by me to test the non-cumulative key figure.
In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.
I have done the following while defining the non-cumulative InfoCube:
1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
2. Loaded data to non-cumulative InfoCube from flat file.
3. Compressed data in non-cumulative InfoCube after the load.
Note:
1. Validity area is determined by the system based on the minimum and maximum date in data.
2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
Is there any other settings to be done?
Please help me in resolving this issue.
Thanks and regards
Pruthvi R

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

Non-Cumulative Key figure with inflow & outflow

I am using some non-cumulative key figure in our inventory cube, however, I could not find the non-cumulative field in E or F table of the cube?
Is there a separate table to hold the reference unit. If so, what is the table name.
Thanks.

Hi,
Go to t-code RSDV and enter the tech.name of your cube that has the non-***. key figure and you will see a validity table. This is only thing I know that will make you look at validity table.
The unit for the Non-*** KF will be the same unit as its inflow and outlow parameters' unit.
Thats my 2 cents on the matter.
Reddy

Non cumulative key figure is not getting filled based on inflow and outflow

hi,
i have a non cumulative key figure which is having inflow and outflow.
i have these three info objects in dso.
as i know non *** key figure is calculated based on inflow and outflow.
i am getting values for inflow and outflow so non *** should be calculated based on this values.
but the collumn is blank in the dso
in that non *** keyfigure i have added two info objects in inflow and outflow.
is there any other setting i nedd to do?
please sugest me.
its urgent

Hi Venkat,
Have you followed the process right. First Filling the Initial Stocks and then Inflow and Out Flow and then Delta. If you follow the process correctly then you can able to view the Data in the Reporting Level.
For Initial Stocks the Marker Should be set. For Inflow and Outflow the Marker should not be set.
Hope This Helps,
Regards,
rik

Snapshot scenario or non cumulative key figure in inventory management

Hi
We are currently using Inventory Management with non-cumulative key figures but we get very high performance problems due to so big number of lines in info cube.
We are analyzing the other scenario with snapshot and I am asking if it would be very realistic to use it to satisfy our requirement: to be able to get inventory management at day level for about 2 000 000 combinations article-site and about 100 000 stock movement lines per day (we are retailer!).
Is there somebody to give me advice about it?
Tanks a lot
Anne

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

Bad performance with non-cumulative key figures

Hi All,
I have a cube with 8 non cumulative key figures based on fiscper.
I am not sure how the performance for reporting with non-cumulatives can be improved.
Thanks
Karen

Performance of non cumulative cubes is dependant on the distance between the marker (date of the last compression) and the execution date.
For actual stock, the more you compress the better it is.
Regards,
Fred

Suppresion of NON-ZERO numbers in Key Figures

Similar Messages

Maybe you are looking for