Suppress Activate Equipment Button/Access from IE02

Hello,
When a serial number is created from MM it creates a serial number master record which is really an equipment record with a single serial number view. It has an equipment number in ITOB.
In IQ02, there is an activate equipment button.
My question is from IQ02, does anyone know of a way to hide or prevent the futher activation of the equipment.
My MM users need access to IE02 to update serial numbers if needed. My PM users do not want others to have access to the equipment records
I am looking at how it can be accomplished via security or configuration. Creative ideas are truly appreciated.
Thanks to all the PM experts for having a look.
Regards,
Dawn

hi
i think you can control form the roles and authorization. for stores person specify only the IQ03 only . Also what data did the MM user try to enter in the serial number master.
if you do the goods receipt some of the information will be automatically captured in the serial number master
regards
thyagarajan

Similar Messages

Automatically activate / click button in menu - dvd@access

Hey all -
I'm creating a DVD in DVDSP 4.1.2. There are video sections as well as DVD@acess sections. I have a main menu with a handful of buttons - some go to video some go to dvd@access menus. My main menu is a still image.
What I want to do is have the user click on a button and have them go to the dvd@access menu...which would then load the internet site I have set up for the menu. What I want to do is immediately after loading the dvd@access menu I want a to activate a button on that menu and automatically send them back to the main menu. Effectively automating a "back" button. I want the web page to load and then send them back to the main menu to make another selection. Is this possible?
Thanks in advance.

assign the menu a duration and use a timeout target.

How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling?

How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling? It is installed on my home network behind my TWC broadband router.

Ok.. since the TWC modem is also a router.. all configuration takes place on this box.. NONE whatsoever takes place on the TC.
There is no airport utility 7.7.3 but there is a firmware of that number for the latest AC model TC..
Is it tall like this.
Then it is Gen5.
otherwise it will have a firmware.. 7.6.4 or earlier and the airport utility must be 6.3 or earlier.
Open the Airport utility and give us a screenshot of the summary page.
That will also help us determine that you have the TC, which version and how it is setup.
You might want to press the edit and also give us the Internet and Network tab as they should be set correctly as well.
I have created a DDNS through DYN.com although I am not sure how to implement this into the TC.
You do not do anything in the TC.. set it up in the Ubee router.
Port forward 548 to the TC in the Ubee router.
And make sure the TC has a static IP in the Ubee router.
Overall if you find this too hard I strongly recommend you buy a product designed for remote access .. eg WD MyCloud.. they are cheap and easy peasy to setup for remote access.. by PC or Mac and since it is built outside of Apple you not bound up in Apple limitations built into all their equipment to prevent you using it the way you want.. rather than apple want you too.. eg BTMM and iCloud being the only way apple provide for access to the TC and only when it is the main router of the network.
You are fighting hard because Apple made this hard.. not easy.

How can I move my Verizon e-mail accessed from my iPAD to folders?

How can I move my Verizon e-mail accessed from my iPAD to folders?

If your Verizon account is an IMAP account you can create folders on the iPad via the Edit button when you are in the account. If you see an edit button in the window where your inbox, draft folder, sent folder and trash folder appear in that account - tap on it and an Add Mailbox button will pop up at the bottom of the window. If there is no Edit button there - your account is not an IMAP account and you cannot create folders on the iPad in the mail app.

RAR: Risk resolution options , Remove access from user is disabled

Hi All,
In RAR , After risk analysis, if we click on risk description 3 Risk resolution options are there.
Mitigate Risk
Remove access from user
Delimit access for user
In these options mitigate risk only working.I am using GRC SP 5.
How about other two options , save button is disabled.How to enable this?
can we remove/delimit access to user using these options? any body tested these options?
Thanks n Regards,
Joseph

Joseph,
These functionalities do not exist in the tool and these buttons have been in the RAR for past 2 years. SAP wants clients to use CUP for removing or delemiting access so I highly doubt this will ever work.
Alpesh

Cannot set Flash button properties from sprite behaviour

I'm puzzled...
I'd like to set Flash button properties from behaviors on the
sprite
itself (unselect all buttons with a sendAllSprites, for
example) but
only this sample script works :
on mouseEnter me
sprite(spriteNum).selected = true
end
those ones won't:
on mouseEnter me
me.selected = true
end
on mouseEnter me
selected = true
end
It must but obvious but I can't get it to work...
Thanks.
PJ

The selected property is a property of the sprite. You need
to
reference the sprite specifically when you access it.
When you are using
me.selected=true
the 'me' is referring to the current instance of the
behaviour that is
running. It is not referring to the sprite itself. Therefore,
you need
to use
sprite(me.spriteNum).selected=true
so that you correctly reference the sprite.
You can use the syntax
me.property=true
only if the property in question is a property in that
*script*.

How to activate hold button in MIGO ?

Dear all,
How to activate hold button in MIGO Screen ?
Jeyakanthan

Note 316931 - MIGO: 'Hold data' does not work
Summary
Symptom
The function 'Hold data' is not active in Transaction MIGO.
Additional key words
Enjoy
Cause and prerequisites
This is caused by a program error.
Solution
Set the attribute 'Hold data' in the Screen Painter (Transaction SE51) for program SAPLMIGO in all screens. Generate the screen after you made the change. The functions are then available.
You do not need to implement the changes manually if you import Support Packages.
A prerequisite is that Note 303091 exists in your system.
Manage held data
You can use this function to hold the data you are currently entering. No documents are posted.
To retrieve this data, choose "Goods receipt -> Held data". When retrieving the data, the held data is deleted from the overview tree.
If you want to delete held data that is no longer required from the overview tree, you can select this data with "Goods receipt -> Held data".
It is also possible to use held data as a reference for frequently recurring transactions, that will not be deleted after being called again.
Caution:
Some data cannot be held by the system and has to be re-entered after you try to retrieve it. This data includes:
Batch classification
Import data
Profitability segment
In Batch Classification, newly created selection criteria is lost if you do not post the document immediately.
Edited by: sudhansu satapathy on Mar 4, 2010 9:19 AM
Edited by: sudhansu satapathy on Mar 4, 2010 9:21 AM

Removing posting access from txn codes (FBV2, FBV3 and MIR4)

Hello all,
There is a business requirement to remove the ability to post
Financial documents from a particular FI role. We are using a
job role (for the most part, one SAP role per user) approach.
For the transaction codes FBV2, FBV3 and MIR4, they would like to
remove the ability to post. The relevant auth. object for
posting is object F_BKPF_BUK, Vendor: Account Authorization. In
this role, the ability to post (which is actually activity 01,
create), has been removed; however, the role still has the
ability to post the documents.
I executed an auth. trace for each transaction code and the only
activities outside of 03 or 77 (pre-enter) are checked in this
object. I also verified that none of the other roles assigned to
the test ID (a FI reporting and display role) have this
authorization object with 01 in the activity field.
As a sanity check, if anyone has removed posting access from
specific FICO roles, please confirm that this authorization
object is the correct one. I believe I've done the standard
security 'debugging' steps and now I am stuck.
Also, other transactions with posting access FV60 and FBV6 are
restriction from posting by removing activity 01 from objects
F_BKPF_BLA and F_BKPF_KOA.
Thanks in advance for your help!

Hi, the authorizations were correct in the first place - ths issue is that they didn't test it fully because the post button was still visible. However, when I tested it via the instructions given by FICO, when I selected the post button, security prevented me from doing so and authorization object F_BKPF_BUK for activity 01 was checked.
Next time, I will make sure the testers are testing properly.

SFW5 (BF) does not show me Check / Activate Changes button in ECC 6 EHP4

Hello All,
i am facing a strange problem, i want to activate business Function 'HCM, Core Processes in Talent Management' (BF name 'HCM_TMC_CI_1') in ECC6 EH4 IDES system. I also have SAP enterprise SearchTREX installed and this component shows me dependency in green light in SFW5 tcode (that means all the pre-requisites are fullfilled).
But in SFW5 tcode does not show me Check / Activate Changes button on the top bar, and if i see in menus its greyed out i am not able to activate the same.
I tried to unlock client using tcode SE06 and SCC4 but nothign worked out.
I even checked the authorization of user it has sap_all, SAP_new, IDES_IDA_SUP, IDES_SWITCH, R3_TRUSTED.
I will appreciate any help on the same.
We developed system from Homogenious Export Image provided by SAP to us.
Mani

Hello Mani,
You have to check for the compitability and dependency of already activated Enterprise Extension. If an incompatible Extension set is activated than it wont allow other application to work. Please check and let me know if you require anymore information.
Regards,
Vinit Pagaria

I want to activate Color Management Suite from purchase via internet photoshop, illustrator and indesign, how? thank you for your reply

I want to activate Color Management Suite from purchase via internet photoshop, illustrator and indesign, how? thank you for your reply

hello, I already Bridge CS6 installed but can not be accessed by the> parameters color edition menu. The message said that eereur lme Suite Color Management is not enabled. What should I do?
De : gener7 <[email protected]<mailto:[email protected]>>
Répondre à : "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date : mardi 9 septembre 2014 14:20
À : jp <[email protected]<mailto:[email protected]>>
Objet : I want to activate Color Management Suite from purchase via internet photoshop, illustrator and indesign, how? thank you for your reply
Download and install Bridge CC, then in the Bridge Edit menu > Color Settings choose the color settings you want to synchronize your CC apps to.
ATTENTION Le message contenu dans cet email ainsi que dans tout fichier attaché est destiné exclusivement aux personnes dont le nom figure ci-dessus. Il peut contenir des informations confidentielles ou protégées par le secret professionnel et dont la divulgation est strictement prohibée. Si vous avez reçu cet email par erreur, détruisez-en le contenu. Vous n'êtes pas autorisé, dans cette hypothèse, à copier, distribuer ou conserver ce message. Merci.
WARNING This information in this mail and in any attachments is intended for the above-mentioned addressees only. It may contain privileged or confidential information the review, dissemination or disclosure of which is strictly prohibited. If you have received this email by error, please destroy it. In this case, you are not authorised to disclose, copy, distribute, or retain this message or any part of it. Thank you.

Can't activate direct data access for VProvider

I try to activate direct data access for BC VirtualProvider 0TR_CM_1. When I open "Activate Direct Access" dialog I don't see any assigned source systems in "Source Syst. for InfoSource 3.x" nor any in "Data Transfer Processes" tabs. Does it mean what non of source systems don't have direct access data sources? Or in other words - why I can't assign any source system for the BC VProvider?

Hi,
While creating datasource there is an option for direct access.This option shows if the DataSource supports direct access to data.
A RemoteProvider in BI can only get data from a DataSource that supports direct data access.
It is only useful to access data directly if the quantity of data to be extracted can be restricted to a suitable selection.
Hope this helps
Regards
Karthik

Why cant I send emails, or open folders, from my Outlook email when using ipad. My Outlook is functioning normally when accessed from laptop.

Why am I unable to send emails or open folders from my Outlook email when using my iPad? My Outlook is functioning normally when accessed from my laptop. This problem has been going on for three days now - everything was functioning normally before. I have looked at the standard troubleshooting suggestions provided by Apple, but they do not appear to cover this eventuality. I should be most grateful for any help.

Try first to Clear your cache from : Tools > Options > Advanced > Network, Clear Now button.
if the above is not helpful, [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles create a new profile] and check it again.
if you create the new profile see: [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles#w_recovering-information-from-an-old-profile Recovering information from an old profile]
thank you

I need to call the Run continously button programmatically from MFC application .

I have create Labview application from sample VI and with help of VirtualInstrument class I am to access the methods like Run ,SetControlValue and getControlvalue .But for VI we have Run continously button also .how do I programmatically call the Run continously button opteration from my applciation using VI methods.

"Run Continuously" is not something that should be used in an application. (There are very few legitimate uses for continuous run, e.g. to quickly play with a few input parameters while debugging a subVI independent of the main application. The equivalent in your case would be to just place the run invocation in a loop and call it repeatedly. This is definitely not the way to do it!)
Why don't you simply place a big while loop around all the code inside the VI that needs to run continuously?
See also THIS recent discussion.
LabVIEW Champion . Do more with less code and in less time .

I GETerror message 403 DO NOT HAVE PERMISSION TO ACCESS FROM THIS SERVERwhen trying to access aolFROM THE TOOL BAR

HELP I GET ERROR MESSAGE 403 "NO PERMISSION TO ACCESS FROM THIS SERVER

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Creating a Button Class from MC

I have a few simple questions for those who know about
classes. I have been reading the tutorials on creating classes and
specifically extending the MC class. I am pretty sure that an
extended MC_Class might help me get what I need from my project.
I essentially have a bunch of buttons, hundreds to be exact -
and the exact number needs to be dynamic. Each one is currently a
static MC with a bunch of variables assigned to each one via global
variables. Its iis pulling in data taht assign the button values
from XML files and - these XML files may change.
Q1. If I extend the MC class so I can add attributes to MC's
instance (Avoiding global variables) - will it mess with the rest
of the movie clips in my scene? I mean if all I want to do is ad a
a few dynamic string variables - it really shouldnt effect any of
the other clips would it? MC.JumpURL = "newurl.com", MC.Thumnail
="/here/image.jpg" (This would help alot)
Q2. What if I wanted to define actions of the new MC in the
class? If the MC is an extension of the MC class. Would all of my
MC's automatically take on the actions of the custom MC Class? For
instance - I want the movieclip to animate onscreen and have
rollover effects. I could do this easy if it were static - but I
need this to become dynamic. Also - there are now unknown
quantities to deal with
Q3. How exactly would I call and assign the MC its atributes
at the same time? And how do I specify this MC to use the functions
defined in the class and not the other MC's I created elsewhere in
the File.
Example. Currently I have a grid of MCs' created when the
User clicks a menu item (Another type of MC).
Each new MC animates onstage - it calls a
loadMovie(_root.thumb[0], this.Flipper) to assign and embedded MC
an image defined in the XML that was loaded and assigned because I
placed the instance on stage and wrote a MC script on each MC.
Confused - check out what I am creating at
www.vincesidwell.com/Fischer
Click Fabrication or TurboSystems menus. Both menues will
load a new set of Thumbnails at the bottom. They are loaded via an
XML loaded by the menu and a function assigns the jpgs for the main
gallery, Rollover image, and eventually a URL for a downloadable
High Res Image.
The client recently added more than 9 images per menu item. I
will need to create a scrollable thumbnail gallery with dynamic
quantities
I can manually create the MC Scroller item for static number
of buttons. But scripting an unknown for each ones links and images
is insane. So I am looking at Classes. Assign a custom class for
the flipping buttons and I should be able to assign tthem as the
XML loads, and have it automatic. (pray please please please)
Anyhelp?
Thanks
Vince Sidwell

Hi there!
I'll try and give some answers to your questions below...
"vin-E" <[email protected]> wrote in message
news:[email protected]...
>I have a few simple questions for those who know about
classes. I have
>been
> reading the tutorials on creating classes and
specifically extending the
> MC
> class. I am pretty sure that an extended MC_Class might
help me get what
> I
> need from my project.
>
> I essentially have a bunch of buttons, hundreds to be
exact - and the
> exact
> number needs to be dynamic. Each one is currently a
static MC with a
> bunch of
> variables assigned to each one via global variables. Its
iis pulling
> in
> data taht assign the button values from XML files and -
these XML files
> may
> change.
>
> Q1. If I extend the MC class so I can add attributes to
MC's instance
> (Avoiding global variables) - will it mess with the rest
of the movie
> clips in
> my scene? I mean if all I want to do is ad a a few
dynamic string
> variables -
> it really shouldnt effect any of the other clips would
it? MC.JumpURL =
> "newurl.com", MC.Thumnail ="/here/image.jpg" (This would
help alot)
You do not have to create a new MC class to assign local
values or functions
to it. A pseudo code example:
Loop through total buttons you want to make (which can be
number of entries
in an XML file)
Create a new movieclip and load the button graphic into
this, give it a
name like
MyButtonX, where X is an increasing number based on which
button this
is. (Instead of creating
and empty movielcip, you could also attach a movie (or
button) from
library.
Assign the values and create the functions for this button
that you
would like (probably based
on information in the XML file):
MyButtonX.someVariable = node.attribues.someData;
createOnRelease(MyButtonX, someOtherParamters)
(where you have defined the function createOnRelease to do
something
like
function createOnRelease(MC, someOtherParameteres) {
MC.onRelease = function() {
do what you want to do based on someOtherParameteres
Position and resize MyButtonX
In your example you have a 3x3 grid, which might extend to
3xTOTAL,
so you'd have to use some
mathematical formula based on the value X, something like
MyButtonX._x =
(((X-1)%3)*(buttonWidths+hSpaceBetweenButtons)
MyButtonY._y = Math.floor((X-1)/3)*(buttonHeights
+vSpaceBetweenButtons
end of loop.
>
> Q2. What if I wanted to define actions of the new MC in
the class? If
> the MC
> is an extension of the MC class. Would all of my MC's
automatically take
> on
> the actions of the custom MC Class? For instance - I
want the movieclip
> to
> animate onscreen and have rollover effects. I could do
this easy if it
> were
> static - but I need this to become dynamic. Also - there
are now unknown
> quantities to deal with
If you actually create a new class, than all instances of
that class will
have the methods you define for it (just like all instances
of a movieclip
has those methods. At least, have them available. That
doesn't mean they are
always in use ... like for example the onRollOver. But again,
you don't need
to create a class to give all your dynamically created
buttons a rollover
effect. (Check code above).
> Q3. How exactly would I call and assign the MC its
atributes at the same
> time? And how do I specify this MC to use the functions
defined in the
> class
> and not the other MC's I created elsewhere in the File.
You use the instance name of the MC to access that MC and its
attributes/methods. For example button number 10 might look
like this:
trace(MyButton10._x);
trace(MyButton10.someVariableYouHaveDefined);
MyButton10.callSomeFunctionYouHaveDefined();
For a movieclip to access a variable that has been defined
for that instance
of the movieclip, use "this" to point to that particular
instance. So if we
defined the function "callSomeFunctionYouHaveDefined" for
button number 10
and want to access "someVariableYouHaveDefined" for this
particular
instance, then
MyButton10.callSomeFunctionYouHaveDefined = function() {
trace(this.someVariableYouHaveDefined);
> Example. Currently I have a grid of MCs' created when
the User clicks a
> menu
> item (Another type of MC).
> Each new MC animates onstage - it calls a
loadMovie(_root.thumb[0],
> this.Flipper) to assign and embedded MC an image defined
in the XML that
> was
> loaded and assigned because I placed the instance on
stage and wrote a MC
> script on each MC.
>
> Confused - check out what I am creating at
www.vincesidwell.com/Fischer
>
> Click Fabrication or TurboSystems menus. Both menues
will load a new set
> of
> Thumbnails at the bottom. They are loaded via an XML
loaded by the menu
> and a
> function assigns the jpgs for the main gallery, Rollover
image, and
> eventually
> a URL for a downloadable High Res Image.
>
> The client recently added more than 9 images per menu
item. I will need
> to
> create a scrollable thumbnail gallery with dynamic
quantities
>
> I can manually create the MC Scroller item for static
number of buttons.
> But
> scripting an unknown for each ones links and images is
insane. So I am
> looking
> at Classes. Assign a custom class for the flipping
buttons and I should
> be
> able to assign tthem as the XML loads, and have it
automatic. (pray please
> please please)
Again, no need for a class for this. If you load the buttons
into seperate
MCs, and make sure to have all these MCs created inside a
common parent MC
for these buttons (which then _only_ contains these buttons).
You can move
this parent MC up and down on the stage based on the
scrollbar. And you can
read height off this MC to create your scrollbar.
You might want to check out the following tutorials at
http://www.gotoandlearn.com/:
XML Video Playlist
Creating Animated Buttons
Introduction to OOP
Now, I've said many times you don't need to make your own
class to do what
you want. That does not mean you can't make your own class. I
just think
that the main problem you are facing is the dynamic part,
which you will be
facing if you make your own class or not.
/Jensen/
>
> Anyhelp?
>
> Thanks
> Vince Sidwell
>
>
>

Suppress Activate Equipment Button/Access from IE02

Similar Messages

Maybe you are looking for