Suppress pop up dialog boxes on error

Hi, I was wondering if there is a way to suppress the error dialog boxes that appear when calling interface type commands. For example, I'm calling the TCP/IP Open command and if the port is not avaible it throws up a dialog box with an error stopping execution. I want to handle the error without stopping so I can report the error manually. I'm sure there is a way to suppress this from happening. Usually the general error handler is for showing the dialog errors if you want them.
Thanks...
Solved!
Go to Solution.

QRP wrote:
That was a rude response! All I want to do is handle the error coming out of the TCP/IP open command without the error dialog box coming up, I still want the error reported though the error out, but just not the dialog. Whether it takes turning off the auto error reporting or not, I could really care less as long as the dialog box is not thrown. BTW, the only reason I turned off the auto reporting Altenbach is because someone else mentioned it previously that it might be causing the error dialog.
What Altenbach is saying is if the error dialog is coming up, then, by definition you have an unhandled error. It is virtually impossible to handle an error if you are not capturing it, and you cannot capture it if you don't have something coming out of the error out terminal. The only way this dialog is shown is because you do not have an error out terminal wired, so the LabVIEW handling takes over. When a default error dialog comes up, it is basically to tell you you have an unhandled error.
CLA, LabVIEW Versions 2010-2013

Similar Messages

Suppress default editor dialog box

Is there any way to suppress default editor dialog box that comes at 1st launch of Dreamweaver CS5. I need to automate some stuff and cant figure out how to handle it.
I cannot attach screenshot of this dialog box here, but it says that "Dreamweaver CS5 will set itself as Default editor for the following file types:" and gives option as jsp, asp, css etc.
Any help would be appreciated.

wsalopek wrote:
Suffice it to say for the purpose of this thread that when I did the ICS "upgrade" to my Droid 4, nothing but trouble followed until I did a hard reset and had to reinstall/customize everything...lots and lots of frustration and lost time, including a whole day when my phone was not usable at all (slow/rebooting on it's own/battery running hot/high cpu usage/battery dying in 90 minutes)...and I an NOT the only one.
Anyway, my wife has a Droid 4 as well, and she is being pestered by the dialog box that keeps asking her if she wants to do the upgrade. We do NOT want that "upgrade" installed on my wife's phone, but dealing with that dialog box is getting very tiresome.
Anyone know how to suppress that dialog box so it stops popping up?
Thanks...
There is no way to do this that meets the ToS on this board (as Verizon wants everyone to be at the same software level for a particular phone model). Search forums other than this one and the Motorola one for the information you need.

How I can diable in firefox dialog box "download error could not be saved, because the source file could not be read. " when file not downloaded

How I can diable in firefox dialog box "download error could not be saved, because the source file could not be read. " standart download manager when file not downloaded

It is possible that anti-virus software is corrupting downloaded files or is interfering otherwise.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See:
*http://kb.mozillazine.org/Unable_to_save_or_download_files
You can try to set the browser.download.manager.scanWhenDone pref on the <b>about:config</b> page to false.
*http://kb.mozillazine.org/about:config

How to suppress the Print Dialog Box?

Running an (ASP.NET /Crystal Reports 2008) application and using CrystalReportViewer control. Is there way to suppress the print dialog box when I click the print icon on the report tool bar?
Edited by: juRamz on Aug 26, 2009 2:54 PM

Hello,
Sort of, CR needs the info. Only option is to create your own print button that has all the info filled in. It's a Windows Framework Common dialog box that CR calls so it's the OS that is prompting for the info.
Using ReportClientDoc here's a possible solution, note that this too has a dialog box to select the printer:
private void button1_Click(object sender, System.EventArgs e) // Print To Printer button
    System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
    PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
    CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
    //CrystalDecisions.CrystalReports.Engine.PrintOptions newOpts = new PrintOptionsClass();
    pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
    rasPROpts.PrinterName = cboCurrentPrinters.Text;
    rasPROpts.PaperSize = (CrPaperSizeEnum)
        pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
    rasPROpts.PaperSource = (CrPaperSourceEnum)
        pDoc.PrinterSettings.PaperSources[cboDefaultPaperTrays.SelectedIndex].Kind;
    // new API added to allow changing printing options
    newOpts = new CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions();
    newOpts.DissociatePageSizeAndPrinterPaperSize = true;
    rptClientDoc.PrintOutputController.ModifyPageMargins(0, 0, 0, 0);
    rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
    MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
Thank you
Don

Photoshop CS5 pop-ups (Dialog boxes) will not stay / stick in place

My pop-up / dialog boxes have always opened in the same place as I had placed them from the previous time I had used them. All of a sudden they will no longer stick / stay, they open in the center of the page.
For example when I first open PS and I click Ctrl > C for Brightness / Contrast the box will open in the center of the page. If I move it to the side (so its not in the working area) it should open in that spot the next time I use it.
But now it will always open in the center of the page regardless of where I have placed it before. Very annoying it have to move the dialog boxes all the time.

What OS are you running?
I know of no way Windows can cause that, but I don't know about OS X.
If you can't find a direct solution, it might be a case where a complete Photoshop preferences reset to defaults could help... Press and hold Control - Shift - Alt simultaneously (or Command - Shift - Option if on a Mac) immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
-Noel

How can I Create custom pop up dialog box with question/answer

I need to create a pop up dialog box that asks a question and accepts an answer input. The form needs to be able to be emailed out (not server based) Can someone help me do this? I am a designer, with very (Very!) limited coding skills. Looks like the windjack program that I keep running into does not work with Acrobat X.
Thanks for any help you may have

I am not able to help you with the current method you are using - which seems an odd one in that you are using a menu script to do this????
I would have done the page completely differently - instead of slicing it up into a vastly complex table, I'd have added the image to the page and then used an imagemap. Then I'd have used this script to add the popups (as toolitps) that you can be as simple or as complex as you wish: http://boxover.swazz.org/.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Move an application "pop-up" (dialog box) with keyboard possible?

Is there a way to move an application's pop up (dialog box) with a keyboard command/shortcut? I had a situation where I was not connected to my 2nd monitor and an application popup box was opening on that 2nd (*not connected*) monitor.
I hate to say this; but on a PeeCee, a user can move a window via the keyboard. Is this possible on a Mac? Thanks!

no, it's not possible on a mac. if the popup open on the other monitor connect the second monitor and move the popup with a mouse. it should open on the main monitor form now on.
If you don't have a second monitor at all do the following.
1) goto System Prefs - universal access - enable access for assistive devices.
Paste the following into Script Editor and press run. This will move all offscreen windows currently open on the second monitor to the main screen.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 335px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
–– Example list of processes to ignore: {"xGestures"} or {"xGestures", "OtherApp", ...}
property processesToIgnore : {}
–– Get the size of the Display(s), only useful if there is one display
–– otherwise it will grab the total size of both displays
tell application "Finder"
set _b to bounds of window of desktop
set screen_width to item 3 of _b
set screen_height to item 4 of _b
end tell
tell application "System Events"
set allProcesses to application processes
set _results to ""
repeat with i from 1 to count allProcesses
set doIt to 1
repeat with z from 1 to count processesToIgnore
if process i = process (item z of processesToIgnore) then
set doIt to 0
end if
end repeat
if doIt = 1 then
tell process i
repeat with x from 1 to (count windows)
set winPos to position of window x
set _x to item 1 of winPos
set _y to item 2 of winPos
if (_x < 0 or _y < 0 or _x > screen_width or _y > screen_height) then
set position of window x to {0, 22}
end if
end repeat
end tell
end if
end repeat
end tell
</pre>

BDC for pop up dialog box.....

Hi Experts,
I need urgent help in BDC.
I want to handle BDC for the pop up dialog box.
Please help.

hi
can u he a bit clear

The pop-up dialog box, such as on Facebook, is truncated. It chops off the command buttons.

The pop-up dialog boxes, such as those on Facebook, are truncated. The boxes are 1/2 of normal size with the bottom 1/2 gone, including the command buttons, making it useless. Since yesterday evening, ALL dialog boxes on Facebook and Zynga are affected. I can't post anything from the pop-up boxes.
== This happened ==
Every time Firefox opened
== yesterday evening

Reset the page zoom on pages that cause problems: '''View > Zoom > Reset''' (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages

Open pop up dialog box

I read on article i.e to create new pop up dialog box. We have to use launchListener"#{backing_bean.handleLaunch}" to pass parameter to corresponding pop up dialog box.
Anyway I tried to do the same job declaratively by using setActionListener instead of launchListener. The pop up dialog box gets the passed parameter using EL #{prossesScope.param} And it works.
Is this fine technique or not recommended at all?
Regards
Eric H

Hi,
its fine as well. As soon as the dialog is opened the process scope becomes accessible. With multiple parameters you will however find it more convenient to use the launch listener as describe in
http://download-uk.oracle.com/docs/html/B25947_01/web_complex003.htm#CEGDAHEA
because a setActionListener can only set one parameter at a time
Frank

Printer Pop-up Dialog box

Hi
I encounter the printer Pop-up Dialog Box appear upon a
PrintJob is sent.
Is there a way to ignore or escape this pop up box?
Regards

We have currently upgraded 3 instances and it is happening in all 3 on all PC's. Appears that Oracle has it's own pop-up printer window it uses when printing from the PC instead of using the standard one. I imagine it is slow because of it being java. I'd open an SR but they will just say to update to today's version of java. We can't test in other browsers since IE8 is our standard company wide. I haven't got any hits searching MOS or Google on this so was just wondering if others are seeing the same thing. BTW - Our 11i instances work fine and load quick even on the first print but then 11i is using the PC's standard print pop-up window and not a java based one from the applications.
FYI - Fuound Bug 9202075 which seems to be the same issue except that we are on java 1.6.07. I have opened an SR.
Edited by: user649511 on May 20, 2011 7:18 AM

Confirmation Pop up dialog box

Hi All,
I want a pop up dialog box to be open on click of my create button asking "whether you want to submit the page"
Need help
Regards

Hi Trent
I have a create button. On the button optional URL target section, changes the Target as URL and the URL Target as
javascript:apex.confirm('Are you sure you want to submit?', 'CREATE');
I tried with this even
javascript:apex.confirm('Are you sure you want to submit?', 'SUBMIT');
But in both the cases the funtion is not calling.
Regards

Please help!! How to communicate between applet and pop up dialog box

Hi friend,
I have done a AWT pop up dialog box from Applet. In this pop up dialog box, I want get user name, and display on an Applet, anyone can tell me how to do? Thanks a lot!!!!
Alva

You need to create two methods in your applet, getName and setName as well as a name field.
private name = "";
public void setName(String n)
    name = n;
public void getName()
    return name;
}The various constructor methods for Dialog already take the owner of the Dialog (your applet) as a parameter, so in your applet's ActionEvent handler, all you have to do is call
    name = textName.getText().trim();
    owner.setName(name);Yes, it's that easy.

Suppressing smartforms Print dialog box

Hi,
I want to suppress Print Dialog Box in smartform and directly go to print preview. I have set the CONTROL_PARAMETERS ,NO_DIALOG to 'X' and PREVIEW 'X' but still print dialog box is not suppressed. i even set OUTPUT_OPTIONS-TDDEST but it disappear and each time it display the print dialog with output device(TDDEST) field empty.
Thanks in advance.

Hi,
Chek this sample program in 4.7:SF_EXAMPLE_03
control-no_dialog = 'X'.
control-preview   = 'X'.
control-no_open   = 'X'.
control-no_close = 'X'.
call function 'SSF_OPEN'
    exporting
*     ARCHIVE_PARAMETERS       =
*     USER_SETTINGS            = 'X'
*     MAIL_SENDER              =
*     MAIL_RECIPIENT           =
*     MAIL_APPL_OBJ            =
*     OUTPUT_OPTIONS           =
      control_parameters       = control
*   IMPORTING
*     JOB_OUTPUT_OPTIONS       =
    exceptions
      formatting_error         = 1
      internal_error           = 2
      send_error               = 3
      user_canceled            = 4
      others                   = 5.
if sy-subrc <> 0.
*   error handling
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    exit.
endif.
*   now call the generated function module
    call function fm_name
         exporting
*                   archive_index        =
*                   archive_parameters   =
                    control_parameters   = control
*                   mail_appl_obj        =
*                   mail_recipient       =
*                   mail_sender          =
*                   output_options       =
*                   user_settings        = 'X'
                    customer          = customer
                    bookings             = bookings
                    connections          = connections
*        importing document_output_info =
*                   job_output_info      =
*                   job_output_options   =
         exceptions formatting_error     = 1
                    internal_error       = 2
                    send_error           = 3
                    user_canceled        = 4
                    others               = 5.
    if sy-subrc <> 0.
*     error handling
      message id sy-msgid type sy-msgty number sy-msgno
              with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
endloop.
call function 'SSF_CLOSE'
*   IMPORTING
*     JOB_OUTPUT_INFO        =
    exceptions
      formatting_error       = 1
      internal_error         = 2
      send_error             = 3
      others                 = 4.
if sy-subrc <> 0.
*   error handling
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
* analyse internal error table of Smart Forms
call function 'SSF_READ_ERRORS'
       importing
            errortab = errtab.
if not errtab is initial.
*   add your handling
endif.
I hope this will work.
Regards,
Anjali

File format in pop up dialog box in table control

Hi All,
I am using a popup dialog box on user command click in table control. I have to fix the file format to '.CSV' format only from the selection, how to fix this. The FM is 'KD_GET_FILENAME_ON_F4'. Is there any other FM ?
Regards
Gajendra

Hi,
To implement general checks in SRM,you can use BADI "BBP_DOC_CHECK_BADI".But the messages will not come in form of POP UPS.To display messages in the form of Pop up ,you need to implement both the BADI's BBP_DOC_CHANGE_BADI and BBP_DOC_CHECK_BADI.
For sample code,refer the foll link:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/bbp_doc_check_badi-CheckPurchasingDocument&
BR,
Disha.
DO reward points for useful answers.

Suppress pop up dialog boxes on error

Similar Messages

Maybe you are looking for