Suppress Section with blank Subreport.

I am trying to suppress a section when the subreport in that section is blank. Supposedly this is described in knowledgebase article c2005853. However I do not know where the knowledgebase is located. Any help will be appreciated.

Hi Brent
Try to search for SAP note # 1211338 - How to suppress a section in the main report that contains a blank subreport.
Hope this helps you.
Regards
Ankeet

Similar Messages

Detail section with a subreport in it will not suppress when blank

Hi all,
I think this is an easy one because I did it before but cant get it done this time for some reason.
I have a Detail section with a sub report in it. %99 of the time it is blank... I have Suppress Blank Section checked but the section still shows up just taking up space.
What did i forget to do please?
Thanks
Timalaugh
Edited by: Timalaugh on Feb 10, 2012 5:04 PM

made changes to the sub report itself.
... every section checked as suppress Blank Section.

CRXI Export to text - suppressed section creates blank lines

I'm using CRXI Proffesional - full version 11.5.11.1470
I have a report that uses the typical "stealth" subreport to obtain and pass info to the container, but remains invisible in preview mode. The fields in the subreport are all suppressed, the sections in the subreport are suppressed if blank and the subreport itself is suppressed when blank, the section that contains the subreport is also suppressed if blank.
This has always worked fine to get info into the container from the subreport while not creating any "white space" on the report.
Print preview and export to pdf both function just fine, omitting the blank lines.
It seems that exporting this to a text file is now creating blank lines for each occurence of the subreport.
I have seen this problem in a couple of forums but have not seen a resolution yet.
Does anybody have any idea how I can stop the exporting of suppressed blank sections ?

Good morning.
We've got something to get straight first
When you say "...from the Report Viewer. The report printed as expected on HP printer...", do you mean the viewer of the .NET app, or the viewer of the CR designer?
And version 12.0.0.683, is very old (well as far as CR is concerned anyhow ). That version is SP 1, we are now on SP 2. So that will be the place to start. Get to SP 2 which can be downloaded from here;
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Ludek

Suppress printing of blank records

This should be simple, but I have tried everything I can think of, and trolled through the archives, without finding an answer. Please don't chastise me for asking a question which has already been answered, too simple, in the wrong section, or any of the other sins you regularly accuse us of...
I am printing a series of form letters which are selected on the basis of a couple of criteria. I want to exclude records with blank fields. (My database supports null values, but these field entries are blanks, not nulls. The fields are string (alphanumeric) values. My selection criteria (for the 1 month letter) are below. The first two criteria work fine; it is in the third line that I am trying to exclude the blank records. I have tried: {LetterEnt.Gr_LastName}<>"", {LetterEnt.Gr_LastName}<>" ", and then I got clever and tried the entry below. None of these work.
{LetterEnt.Letter1} = "X" and
{LetterEnt.Site} = "Q" and
Length({LetterEnt.Gr_LastName})>0

+Message: AFAIK, if there are no records, there are no detail sections, so
your report must show text from other sections.+
(Is AFAIK some sort of "geek code" (in which case you have gone completely over my head), or are you addressing somebody by that name? (My name is David).)
If there are no records, there are indeed detail sections - with blank address fields. See my previous more detailed exposition of the exact nature of the problem.
+It is also not clear what "forces" a printout. Are you using Crystal
Designer (my assumption since you are posing in the Crystal Report Design
forum) or something else (Crystal Enterprise)? Crystal Designer doesn't
force printouts - a user must initiate the printout.+
Am I using Crystal Designer? I don't know. The program is called Crystal Reports XI in my computer. Are you suggesting that I am in fact asking my question in the wrong forum? (I would have presumed that something called "Crystal Reports Design" deals with design issues in Crystal Reports, but if I am in error, I do apologise. Perhaps you could direct me to the more appropriate resource.)
What "forces" a printout? You are correct insofar as the operator has to push the Print button (at least as presently functioning. At one stage I had the letters printing out behind the scenes using an Active-X control. This ran for 2 weeks, then fell apart and I eventually gave up trying to make it work; but that is another story.) How does this happen? Crystal is adding completely blank pages as the first page on some of the reports, so it is not always immediately apparent to the operator that there is a letter sitting there with a blank address. (And this, too, is a separate issue. I have gone through all the instructions in the knowledge base as to how to get rid of the leading blank sheet. None of the instructions have worked, and I eventually gave up trying. Thinking about it, I have had an awful lot of frustration with this program. Perhaps I am unreasonable, but if I can't get something to work after 3 or 4 hours' trying, I give it up as a bad job and live with the fault.)
+You can always suppress those other sections with a condition such as
IsNull({some field that is never Null).+
It is not clear to me what this means. All the sections other than the detail section are blank - always.
+There are 3rd-party Crystal Reports tools that allow you to skip
processing (printing/exporting/emailing) if the report comes up with zero
records.+
Aha! Am I interpreting this correctly, as saying that I cannot do what I want to do (suppress printing of letters with blank addresses) in Crystal Reports, and that to do this I need to get a third party add-on?

Suppressing printing of blank page

Dear all,
My report consists of 3 distinct sub reports. The first two sub reports should be printed as portrait on A-4 sheet while the third one should be printed as landscape A-4 . I have put the first two sub reports layout in the main section with orientation as portrait while the third one is placed in trailer section with orientation as landscape. The printing of subreports 2 and 3 is conditional. There may be case when first two sub reports get printed while we do not have third report as there is no data in the database for the same. In this case , I am still getting a blank page corresponding to the third sub report in the final report. How do I suppress this?
Regards,
Ranjit

Hey dareys,
Per PCWIZARD's suggestion in another thread,
It may be the printer's power supply is dropping the power to the printer when it is off. You can reset the power supply by unplugging it from both the wall and the printer for 5 minutes.
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Suppress embedded field blank lines in Crystal Reports XI is not working

Hi,
We have a text box in a Crytal Reports XI report which has address information in it as follows:
These are individual fields from the database. We check the "suppress embedded field blank lines" option for the text box and preview it in the designer and the suppression works as expected in that when the unit field is blank the whole address line isn't suppressed. However when we run this report using the Report Viewer control in a VB.NET 2005 application the whole address line is suppressed when the unit field is blank.
This appears to be a bug in the suppression logic when the Report Viewer is used to view a report. While yes we can embed a formula into the address line this adds extra maintenance and confusion which is not necessary as it works as expected in the report designer.
I have seen others which are having a similiar issue and the only suggestions are to create your own suppression using formulas, etc. which is only a bandaid and is not the best solution as the suppression works as stated in the designer but not in the viewer embedded in an application. Please indicate if this is a known bug and if this issue has been addressed and fixed in a new merge module.
We are running Crystal XI 11.5.0.313 for the report designer and have deployed the needed dlls to run the reports with our application using the CrystalReports11_5_NET_2005.msm merge module.
Thanks in advance for any assistance in resolving this issue!

Hello,
Moved to .NET SDK forum.
Upgrade to XI R2 SP 6, you are using the original release:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
And the distribution files are for Visual Studio version of Cr, not R2 build.
https://smpdl.sap-ag.de/~sapidp/012002523100013451312010E/crxir2_fp64_server_ins.zip
Or
https://smpdl.sap-ag.de/~sapidp/012002523100013451332010E/crxir2_fp64_net_mm.zip
Don

Incoming Emails with Blank message body in Outlook 2013 and 2010

Dear TechNet
Why Some of the incoming message we received in Outlook are displayed with blank message body but same message when viewed from Internet browser web client or in Blackberry device message body is viewable and also same message is viewable
in outlook ver 2003 , 2007, 2010 ( without service pack1)
Above problem of incoming email message with blank message body we are facing to users with outlook2013 and outlook 2010 (with sp1) and when the sender of the email is using Lotus Notes Client ver 8.5.3
Request you kindly suggest any setting need to be done in outlook or windows registry to resolve the email messages with blank body.
Thanks in Advance ............................
Regards,
Jayesh
Mob : 09819375673

This is commonly seen with an Outlook add-in, such as the AVG add-in. I just ran into it again today. I removed AVG and enabled Windows Defender on a Win8 laptop with Outlook 2013, and that took care of the issue. If you must use AVG, you can disable the
add-in and then test new emails.
To disable the AVG add-in, this is one method:
Important Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry.
(https://support.microsoft.com/kb/322756/ )
in case problems occur.
To resolve this problem, follow these steps to disable the Avgoutlook.Addin add-in. If the problem is , we recommend that you contact the vendor of the add-in to ask about an updated version of the add-in.
Exit Microsoft Outlook if it is running.
Start Registry Editor.
In Windows 8
Press the Windows logo key+R, type regedit in the Open box, and then press Enter.
In Windows 7, 8 or Windows Vista
Click Start, type regedit in the Start Search box, and then press Enter.
Locate and then select the following registry subkey, depending on the type of Office and Windows installations that you have.
32-bit Office plus 32-bit Windows
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins\avgoutlook.Addin
64-bit Office plus 64-bit Windows
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins\avgoutlook.Addin
32-bit Office plus 64-bit Windows
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\Outlook\Addins\avgoutlook.Addin
Right-click the LoadBehavior value, and then click Modify.
Change the Value Data value to 0, and then click
OK.
Start Microsoft Outlook.
Note To re-enable this add-in in Outlook, change the LoadBehavior value to
3.

Pass Input Parameter With Blank To SSIS Get Strange Result

Hi! I stuck for a while when executing SSIS from stored procedure with input parameter. My input value is not consistent with output one. If I pass value with blank , SSIS seems gets second part. For example , if I pass "CALL FROM SP", SSIS get
"FROM" only.
I use Execute SQL Task to store input parameter. Here is the SSIS snapshot.
And here is the sp snippet
DECLARE @Path VARCHAR(200),
@Cmd VARCHAR(4000),
@ReturnCode INT,
@QUERY_STRING VARCHAR(70),
@BATCH_NO VARCHAR(14)
SELECT @Path = 'xxxxxx'
SELECT @QUERY_STRING = 'CALL FROM SP'
--BatchNo = YYYYMMDDHHMMSS
SELECT @BATCH_NO = CONVERT(VARCHAR(10),GETDATE(),112) + REPLACE(CONVERT(VARCHAR(8),GETDATE(),108),':','')
SELECT @Cmd = 'DTexec /FILE "' + @Path + 'Package1.dtsx" /MAXCONCURRENT 1 /CHECKPOINTING OFF /REPORTING EW ' + '/Decrypt ALCM '
+ ' /SET \Package.Variables[User::BATCH_NO].Properties[Value];' + @BATCH_NO
+ ' /SET \Package.Variables[User::QUERY_STRING].Properties[Value];' + @QUERY_STRING
My test are
input parameter
write to TESTTB correctly ?
any error?
execute SSIS in design mode
CALL FROM SSIS
YES
execute SSIS by sp
CALL FROM SP
NO
Option "FROM" is not valid.
execute SSIS by sp
CALL_FROM_SP
YES
Anyone could give me some hint ?
Thank you so much!!

Hi Nick,
It occurs because an argument of the DTExec commands must be enclosed in quotation marks if it contains a space. From the dtexe (SSIS Tool): Syntax Rules section of the
dtexec Utility (SSIS Tool) document, we can see:
All options must start with a slash (/) or a minus sign (-). The options that are shown here start with a slash (/), but the minus sign (-) can be substituted.
An argument must be enclosed in quotation marks if it contains a space. If the argument is not enclosed in quotation marks, the argument cannot contain white space.
Doubled quotation marks within quoted strings represent escaped single quotation marks.
Options and arguments are not case-sensitive, except for passwords.
So, you need to make the value of the variable @QUERY_STRING within double quotes in the value of the variable @Cmd or remove the space within the @QUERY_STRING value.
Regards,
Mike Yin
TechNet Community Support

Pass parameter with blank space for report ver 6

Hi,
I face a problem that i willing to pass the acno where it's value with blank space, for example ' 9' as parameter into my report, and assign it as v_acno. Inside the report query i add a where condition, acno >= :v_acno. When i run the report and pass acno without ' , it do not show any record. But when i run the report and pass acno with ' then able to show the records.
for example the value i key in
with ' = ' 9'
without ' = 9
So how i can solve it by pass the acno without ' but the record still able to show?
thks
Message was edited by:
user569740
Message was edited by:
user569740

Hi Nick,
It occurs because an argument of the DTExec commands must be enclosed in quotation marks if it contains a space. From the dtexe (SSIS Tool): Syntax Rules section of the
dtexec Utility (SSIS Tool) document, we can see:
All options must start with a slash (/) or a minus sign (-). The options that are shown here start with a slash (/), but the minus sign (-) can be substituted.
An argument must be enclosed in quotation marks if it contains a space. If the argument is not enclosed in quotation marks, the argument cannot contain white space.
Doubled quotation marks within quoted strings represent escaped single quotation marks.
Options and arguments are not case-sensitive, except for passwords.
So, you need to make the value of the variable @QUERY_STRING within double quotes in the value of the variable @Cmd or remove the space within the @QUERY_STRING value.
Regards,
Mike Yin
TechNet Community Support

Can not access app store on iphone 5, comes up with blank screen?

click on app store on iphone 5 and it comes up with blank screen , after awhile the section heading at the bottom of the screen such as top charts, updates, search , etc, but the main screen body is still blank. Seems to be trying to connect but can't. Any ideas? Much appreciate it.
Thanks!
CC

Do you have a case on the phone? If so, what case? If you do, then try removing the case and see if it works.
If not, then try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. After that, try again.

Fill with blanks(spaces) a VARCHAR2 type

Thanks in advance,
I have a VARCHAR2 type rtesta's var of length x(100 char)
how i can fill(write) it without create a other varchar2 var that it'll be only filled with blanks(spaces). e.g
rtesta := ' PC'||fil1||'xxx||fill2....
where fil1 = say 10 spaces.. fill2 = 63 spaces and so on
I would like something as
rtesta := ' PC'|| RPAD(null,10)||'xxx||RPAD(null,63) ...
but.... Oracle treats an empty string as null. And nulls are always a bit special within Oracle. Particularly, rpad('', n) and lpad('', n) returns null.
Exists a built in for my problem?
Thanks

alter table your_table modify(your_column char(100));
update your_table set your_column = ' '
where your_clumn is null; /* (added) But,this is no good for performance */
alter table your_table modify(your_column varchar2(100));Exapmples.
SQL> set null (null)
SQL> create table test (vc varchar2(100));
Table created.
SQL> insert into test values ('');
1 row created.
SQL> insert into test values ('a');
1 row created.
SQL> insert into test values ('abcde');
1 row created.
SQL> select substr(vc,1,10) vc,length(vc) len from test;
VC                          LEN
(null)               (null)
a                             1
abcde                         5
SQL> alter table test modify(vc char(100));
Table altered.
SQL> update test set vc = ' ' where vc is null;
1 row updated.
SQL> alter table test modify(vc varchar2(100));
Table altered.
SQL> select substr(vc,1,10) vc,length(vc) len from test;
VC                          LEN
                            100
a                           100
abcde                       100----
I misread OP's problem, sorry.
Message was edited by:
ushitaki

Issue with blank screen HP G60-447CL Notebook PC

Issue with blank screen HP G60-447CL Notebook PC, I purchased warranty and have had the laptop serviced before for the same exact issue. Same problem has come up again blank screen it has been less than five months this problem was fixed and it has started again: blank screen white, laptop is powered on nothing else happens. Now I cannot reach anyone.

You're very welcome.
I have tried many times to help folks with different drivers and nothing has worked.
I'd say at least a dozen people have posted about this issue, and no one can fix it.
I don't understand it either.

I had my screen sectioned with an application running permanently in it and have lost it, please can someone tell me how to get it to do that again? Thank you.

Hello,
At some point a while ago I somehow mistakenly must have clicked on something in error and suddenly my Google Analytics programme (which is shown in by bookmarks at the top of the screen) was displayed in a section of the browser window to the left - the browser screen was split into two sections, with the google analytics program running in the left section and the right section was my regular browser window where everything ran as normal.
I have no idea how this happened, but love it and have come to really appreciate it. However I've just changed computers, operating systems and allsorts and now I've got everything back on track that window has sadly gone and I cannot find how to get it back. I've searched through every option I can find and cannot figure out how to do that again!
Can anyone help please? :-)

Hi jscher200,
Thank you for your reply, sorry for the VERY late late response, but I have just figured out how to control this separate 'panel'. I find it really useful for monitoring Google Analytics in as it can just sit there running. It does have its limitations, as it's a limited size (you can't expand it to full screen view), so you can only ever see a vertical section of a website and need to scroll to look to the right or left, but I have the live view of people accessing my website running on there and if the numbers start racking up at any time, I can scroll to look and see what pages they are accessing, where they've been referred from, etc.
To get it to work, you save a website address in the Bookmarks Toolbar and when you can see it sitting on the toolbar at the top of the screen with its little icon, right click on it then click 'properties', then tick the box 'Load this bookmark in the sidebar'. The next time you click on this bookmark to open the website, it will load in this sidebar, which looks like a separate 'window' but is immovable. You can only have one sidebar application running at a time, but can change it by right clicking on the bookmark you want to load in there and it will then change to that one next time you click on that bookmark.
I hope this might be useful to others, as I asked for help with this on loads of forums and not one person knew that this existed - even really skilled techies!

I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that

I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that I have to upgrade using the account that I used to buy iPhoto. What do I have to do to upgrade iPhoto?

Dear Katty,
Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
https://discussions.apple.com/thread/3374419?start=0&tstart=0
https://discussions.apple.com/message/16628399#16628399
Do you have an idea of how can I solve this problem?
Thank you very much again.
Best regards,
Alfonso

Mail from Exchange 2010 mailbox - BCC to Hotmail addresses with blank To: field not hounoured

Hi
This feels related to a previous question
http://social.technet.microsoft.com/Forums/exchange/en-US/bec88844-79c1-4d17-bf73-9425842b22de/problem-sending-mail-with-bcc-and-without-to?forum=exchangesvrgenerallegacy but is slightly different - it just applies to Hotmail and related addresses (e.g.
hotmail.com, hotmail.co.uk, outlook.com, live.co.uk).
Sending from our Exchange 2010 to BCC addresses with blank To: field, the BCC is not being honoured, but just by Hotmail-related addresses. Any Hotmail-related recipient sent to in this fashion sees all their and other Hotmail-related addresses in the To:
field. But any other addresses to other mail hosts (gmail, yahoo etc) in the same BCC list aren't shown, and recipients at the other mail hosts have a fully hidden BCC list (i.e. see no To addresses at all).
If the To: field has an address then there is no problem - all BCC addresses are hidden for all recipients as expected.
It feels like it is the way the header is being handled by the Hotmail MTAs. But I only see this behaviour from our Exchange 2010 servers (including test servers).
Below are message headers from examples - anyone any ideas on this?
Thanks,
Gordon
Headers from the same message sent as a BCC to a "@live.co.uk" address and "@gmail.com" address with no To: field, and below that a header of similar with a To: field.
First message, sent from [email protected] (gets translated to
[email protected]) BCCd to
[email protected] and [email protected] with no To: address.
Seen in mailbox of [email protected] (note the "to:" field at the bottom - this is what is being shown in the UI):
x-store-info:J++/JTCzmObr++wNraA4Pa4f5Xd6uensaUSop/gUCq9urBwwSF/6FOwwl1Py7H+wW1z5lc55JnUJDXNvxmGUxkw/bnnWJePWYXWzuS5Ywv2HQzl2GD+3A6SoaKpjD5JlShFHg3JE6so=
Authentication-Results: hotmail.com; spf=pass (sender IP is 143.52.X.XX)
[email protected]; dkim=none header.d=shu.ac.uk; x-hmca=pass
[email protected]
X-SID-PRA: [email protected]
X-AUTH-Result: PASS
X-SID-Result: PASS
X-Message-Status: n:n
X-Message-Delivery: Vj0xLjE7dXM9MDtsPTE7YT0xO0Q9MTtHRD0xO1NDTD0w
X-Message-Info: NhFq/7gR1vQRHV6jbdvQfibhgw1iwvrSqdhXuaSscqGalY1BHnH2KCdI+PRBKCQiYnAlF/zI6HIxnd9XTtPz9XHPDwg5mATFcpFtv9WV5ImszG0/OtQaSIg5iX4MbuVLCVo+t2VN/SyhCbwRod9LNPet1UXZtp+Oho5aLYTKlYQVRQ8OWRHqxMCUhgER4oHof+Be4v85/e3u59xr9Q2GEVPOpY/FDKse
Received: from MTA2.shu.ac.uk ([143.52.X.XX]) by SNT004-MC4F19.hotmail.com with Microsoft SMTPSVC(7.5.7601.22712);
Wed, 10 Sep 2014 03:56:32 -0700
Received: from MTA1 ([10.14.XXX.XXX])
by MTA2.shu.ac.uk with esmtp (Exim 4.76)
(envelope-from <[email protected]>)
id 1XRfZg-0004Kn-9C
for [email protected]; Wed, 10 Sep 2014 11:56:32 +0100
Received: from CAS1.shu.ac.uk ([10.14.XX.XX])
by MTA1 with esmtp (Exim 4.80.1)
(envelope-from <[email protected]>)
id 1XRfZg-0002cz-2q; Wed, 10 Sep 2014 11:56:32 +0100
Received: from MBX1.shu.ac.uk ([xxxx::xxxx:xxxx:xxxx:xxxx]) by
CAS1.shu.ac.uk ([xxxx::xxxx:10.14.XX.XX%12]) with mapi id
14.03.0174.001; Wed, 10 Sep 2014 11:56:29 +0100
From: "user1" <[email protected]>
Subject: RE: PLease ignore yet again! testing Bcc again - no "to" field
Thread-Topic: PLease ignore yet again! testing Bcc again - no "to" field
Thread-Index: Ac/M5d+WfHZZ5GLGRsCfXxvcxsjnbw==
Date: Wed, 10 Sep 2014 10:56:28 +0000
Message-ID: <[email protected]>
Accept-Language: en-GB, en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [10.14.XXX.XXX]
Content-Type: multipart/alternative;
boundary="_000_24BACA8040C3054487601DFC4087062C8C013974mbx1sh_"
MIME-Version: 1.0
to: [email protected]
Return-Path: [email protected]
X-OriginalArrivalTime: 10 Sep 2014 10:56:33.0151 (UTC) FILETIME=[E23190F0:01CFCCE5]
Seen in mailbox of [email protected]:
Delivered-To: [email protected]
Received: by 10.25.156.200 with SMTP id f191csp386624lfe;
        Wed, 10 Sep 2014 03:56:32 -0700 (PDT)
X-Received: by 10.194.200.137 with SMTP id js9mr48633666wjc.90.1410346592418;
        Wed, 10 Sep 2014 03:56:32 -0700 (PDT)
Return-Path: <[email protected]>
Received: from MTA1 (MTA1. [143.52.X.XXX])
        by mx.google.com with ESMTPS id cg3si20369633wjc.56.2014.09.10.03.56.32
        for <[email protected]>
        (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128);
        Wed, 10 Sep 2014 03:56:32 -0700 (PDT)
Received-SPF: pass (google.com: domain of [email protected] designates 143.52.X.XXX as permitted sender) client-ip=143.52.X.XXX;
Authentication-Results: mx.google.com;
       spf=pass (google.com: domain of
[email protected] designates 143.52.X.XXX as permitted sender)
[email protected]
Received: from CAS1.shu.ac.uk ([10.14.XX.XX])
by MTA1 with esmtp (Exim 4.80.1)
(envelope-from <[email protected]>)
id 1XRfZg-0002cz-2q; Wed, 10 Sep 2014 11:56:32 +0100
Received: from MBX1.shu.ac.uk ([xxxx::xxxx:xxxx:xxxx:xxxx]) by
CAS1.shu.ac.uk ([xxxx::xxxx:10.14.XX.XX%12]) with mapi id
14.03.0174.001; Wed, 10 Sep 2014 11:56:29 +0100
From: "user1" <[email protected]>
Subject: RE: PLease ignore yet again! testing Bcc again - no "to" field
Thread-Topic: PLease ignore yet again! testing Bcc again - no "to" field
Thread-Index: Ac/M5d+WfHZZ5GLGRsCfXxvcxsjnbw==
Date: Wed, 10 Sep 2014 10:56:28 +0000
Message-ID: <[email protected]>
Accept-Language: en-GB, en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [10.14.XXX.XXX]
Content-Type: multipart/alternative;
boundary="_000_24BACA8040C3054487601DFC4087062C8C013974mbx1sh_"
MIME-Version: 1.0
Similar message sent with [email protected] in To: field: from
[email protected]/[email protected] BCCd to
[email protected] and
[email protected] as seen in mailbox of [email protected]
x-store-info:J++/JTCzmObr++wNraA4Pa4f5Xd6uensaUSop/gUCq9v81cBAiz99O+8SxkfBVJ9NjbAXH8xe1rjvemR/ciBJT5MdkHvi8JYPj0vgDySrSfVnSG2OjgyyKNgjV2QF5PyGqXgRRVkQVM=
Authentication-Results: hotmail.com; spf=pass (sender IP is 143.52.X.XX)
[email protected]; dkim=none header.d=shu.ac.uk; x-hmca=pass
[email protected]
X-SID-PRA: [email protected]
X-AUTH-Result: PASS
X-SID-Result: PASS
X-Message-Status: n:n
X-Message-Delivery: Vj0xLjE7dXM9MDtsPTE7YT0xO0Q9MTtHRD0xO1NDTD0w
X-Message-Info: NhFq/7gR1vTvTqmPqDcS3ZKVZ4zJXdbe/WQhPCDn6U7TYJxfLAm+gALYf9z8EvjEIPauVTBwIF/uNFwreEfp3wgBZYYA8nUP8PFhNAMvRkDwCAnqdyWkFMZlNIQlCYkX84PJFTI7+qoRwxyIjAr2dfuXuj/qYYgN8IbRFD0FftK7d85hSKx/muFfL/1x713Efp1R2ztH/sUzvcxbXl+i8zHWvMqqF945
Received: from MTA2.shu.ac.uk ([143.52.X.XX]) by BAY004-MC6F14.hotmail.com with Microsoft SMTPSVC(7.5.7601.22712);
Wed, 10 Sep 2014 05:22:06 -0700
Received: from MTA1 ([10.14.XXX.XXX])
by MTA2.shu.ac.uk with esmtp (Exim 4.76)
(envelope-from <[email protected]>)
id 1XRguU-0006jA-4s
for [email protected]; Wed, 10 Sep 2014 13:22:06 +0100
Received: from CAS2.shu.ac.uk ([10.14.XX.XX])
by MTA1.shu.ac.uk with esmtp (Exim 4.80.1)
(envelope-from <[email protected]>)
id 1XRguU-0001YY-0a; Wed, 10 Sep 2014 13:22:06 +0100
Received: from MBX1.shu.ac.uk ([xxxx::xxxx:xxxx:xxxx:xxxx]) by
CAS2.shu.ac.uk ([xxxx::xxxx:10.14.XX.XX%15]) with mapi id
14.03.0174.001; Wed, 10 Sep 2014 13:22:00 +0100
From: "user1" <[email protected]>
Subject: test BCC - using own name in To
Thread-Topic: test BCC - using own name in To
Thread-Index: Ac/M8dJDWdvoIxoORH2RMAqNKM2m1w==
Date: Wed, 10 Sep 2014 12:22:00 +0000
Message-ID: <[email protected]>
Accept-Language: en-GB, en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [10.14.XXX.XXX]
Content-Type: multipart/alternative;
boundary="_000_24BACA8040C3054487601DFC4087062C8C013A65mbx1sh_"
MIME-Version: 1.0
To: [email protected]
Return-Path: [email protected]
X-OriginalArrivalTime: 10 Sep 2014 12:22:07.0005 (UTC) FILETIME=[D63584D0:01CFCCF1]

I'm guessing that they're using something other than Exchange for the MTA's. I don't recall seeing this in the "Received:" headers ever since Exchange stopped using the MS Windows SMTP service:
Microsoft SMTPSVC(7.5.7601.22712)
--- Rich Matheisen MCSE&I, Exchange MVP

Suppress Section with blank Subreport.

Similar Messages

Maybe you are looking for