Suppress "Select expand mode" pop up

Hi,
When i use "MNU_ETOOLS_EXPAND" for expansion of Input schedule, i am getting pop up "Select Expand mode", Is there any way i can suppress this message? Please let me know.
Thanks,
Ramanathan

Hi Bengt,
Thank you for your response. I feel rather silly but on reading the manual carefully - something I confess to being remiss about until I need to! Anyway, I learned that I was using the wrong cable (USB) and I need a DV cable to connect to the computer with - not one I'm familiar with as my previous camcorder connected to my computer with a firewire cable.
Once I have that, hopefully iMovie will recognize the device but if not, I will follow the steps you suggested. Will let you know.
Thanks again - Verna

Similar Messages

  • How to Avoid Pop up for Expand Mode Options

    Dear Experts
    In our Input schedules, we have two EVDRE Sheets.
    1) Master Data EVDRE Sheet
    2) The actual transaction data sheet.
    On BEFORE_EXPAND event of the Second sheet we trigger the Expansion of First Master Data Sheet to get the exact EVDRE filters. However we are facing issue as during the first expansion the BPC gives message
    Select the Expand Mode 1 ) Send Data and Clear Input 2) Clear Input.
    Can you please help how can we avoid this message to be show on expansion of 1st EVDRE ?
    You help is highly appreciated. I searched the SDN but could not find any answers.

    Hi Amurag,
    Did you ever find a solution/workaround to this issue?

  • AP: 3.4.1, On import. Can't select expanded previews

    Finally upgraded to AP 3.4.1.OSX 10.7.5. New in this version only, when importing (uploading) RAW Canon files (via FW 800 reader), I can no longer select (or deselect) a file if the preview image has been enlarged, i.e. double clicked on.  In every version prior to this I have been able to click import and the images load in contact sheet format. I uncheck all, then double click an image to see the large version of the JPEG and  step (rt arrow key) thru the images (in enlarged state) one at a time clicking on those I wish to import (on the small blue check box at bottom left which displays the camera's name for the file. When done, the import dialog with all EXIF and ITPC data intact indicates "Import X files to project Y" and the Import Checked button is available. Since 3.4.1, anything selected while in expanded view doesn' show up in the image to import count and the Import Checked button is greyed out.
    Since the 3.4.1 upgrade, any selection/deselection while the image is viewed in expanded mode is ignored by the import controls.
    Net result: importing now takes 3-4x as long as I have to double click to expand each image, then double click again to contract, select (by clicking the select box, arrow over one, repeat process. Example, I have ~900 images from Friday's homecoming. Deadline is tommorrow evening. It will easily add ~2 hours to make the import.
    Even though I couldn't image a reason why, I rebuilt the AP database, no change. The 10.7.5 upgrade was done before the AP upgrade and this behavior was not evident. Same camera, same card, same reader. I can't determine a single change in my equipment or behavior. An examination of the import options in preferences doesn't mention this nor can I find any mention in the PDF manual.
    Stumped and rather irritated and would really appreciate knowing (1) has anyone else seen this behavior and if so, did you find a fix. I will work around by just dumping them all into a project and winnowing  from inside AP, but that's a waste of time and disk space.
    Thanks,
    Robert
    (Also as an added feature, it seems that every plugin is demanding that I re-enter the serial #. I noticed this same behavior with the 3.3 upgrade.)

    Just '''HOLD''' on the text and '''TAP''' on the selected text and you can get the list of options including '''Copy Text'''

  • When using pop up editor windows on a Joomla 1.0.15 website the URLs selected in the pop-up are not passed back to the main window

    The Joomla content management system version 1.0.15 provides a content editor which uses pop-up windows to select images and files. When using any of these pop up editor windows since 3.6.9 the URLs selected in the pop-up are not passed back to the main editor window.
    Up until FF 3.6.8 there were no problems, but FF 3.6.9 and 3.6.10 both exhibit this same problem, as does FF 4 Beta 6. (Support Question raised on this forum in early September when 2.6.9 was released but no response)

    Do you have that problem when running in the Firefox SafeMode?
    [http://support.mozilla.com/en-US/kb/Safe+Mode]
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this:
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • Problem with JTree in expanded mode?

    Hi I have a JTree and I have added few nodes to it. Now when i run my program it is displaying all the nodes in the expanded mode. but at some point of time i need to add few more nodes. when i am am adding nodes to the root node when the tree in expanded mode the newly added nodes are not visible. They are not getting added. what could be the problem? how do i add nodes to the tree when in expanded mode as well as remove few nodes when in expanded mode?
    My code is as follows.
    import java.awt.BorderLayout;
    import javax.swing.JDesktopPane;
    import javax.swing.JFrame;
    import javax.swing.JScrollPane;
    import javax.swing.JTree;
    import javax.swing.tree.DefaultMutableTreeNode;
    public class Main extends JFrame{
         private DefaultMutableTreeNode top;
         public JTree mainTree;
         public Main(){
              super();
              JDesktopPane dp=new JDesktopPane();          
              dp.setLayout(new BorderLayout());
              top =new DefaultMutableTreeNode("All Active Nodes");                    
              mainTree=new JTree(top);          
              JScrollPane mtsp=new JScrollPane(mainTree);
              dp.add(mtsp,BorderLayout.CENTER);
              this.setContentPane(dp);          
              this.setDefaultCloseOperation(DISPOSE_ON_CLOSE);          
              this.setSize(300, 550);
              this.setVisible(true);
         public static void main(String[]args)throws Exception{
              Main as=new Main();
              DefaultMutableTreeNode top=as.getTop();
              DefaultMutableTreeNode node=new DefaultMutableTreeNode("murali");
              top.add(node);
              as.mainTree.expandRow(0);          
              Thread.sleep(10000);
              System.out.println("there");
              DefaultMutableTreeNode node1=new DefaultMutableTreeNode("murali12");
              top.add(node1);
          * @return the top
         public DefaultMutableTreeNode getTop() {
              return top;
    }

    I got the solution. The solution is to invoke nodesWereInserted(TreeNode node, int[] childIndices) this on treeModel after adding nodes are removing nodes.

  • My ipod touch is locked in expanded mode. It happens every time I do a itunes update. I've tried to soft reset then a hard reset. Neither has resolved the problem.  The screen goes back to normal but expands and locks during sync. help

    My ipod touch is locked in expanded mode. I can not get to the controls. It happens everytime I do an itunes update. I have tried a soft and a hard reset which fixes the problem but then during syncing the screen expands again and locks up. Help.

    tell me abt software version ...????
    was it jail break or not???
    reply these two and i will tell u further...

  • How to use substring on a property within a "select -expand properties" statement

    Apologies if this is a dumb question - I'm just familiarizing myself with Powershell.
    I have an existing script which queries groups in AD. It outputs some attributes of the groups to a CSV file.
    I'm trying to modify it a little bit - one of the attributes it returns is the distinguishedname of each group. I'm trying to get it to chop off the first part ("CN=groupname,"), leaving the OU path of each group.
    Here is the original line that I think needs to be modified:
    $AllGroups = $GroupAccounts | select -Expand Properties | select @{n='GroupName';e={$_.name}}, @{n='Description';e={$_.description}}, @{n='DN';e={$_.distinguishedname}}
    Based on what I've gleaned so far about Powershell, I figured I would use the substring function, along with the length of the group's name (plus 4 to account for the "CN=" and the first comma). But every variation that I've tried returns nothing
    at all for the last property ("DN").  
    Any suggestions?

    Hi,
    Here's an example:
    Get-ADUser testac1 |
    Select @{N='DN';E={$_.DistinguishedName.Substring($_.DistinguishedName.IndexOf(',')+1)}}
    Output:
    DN
    OU=Test 1,DC=domain,DC=local
    Don't retire TechNet! -
    (Don't give up yet - 12,950+ strong and growing)

  • ADF TreeTable: selective expand/collapse of rows

    Hi
    I have a query. How can i selectively expand or collapse nodes in a Tree Table. I have got the tree model but i need to expand even further so that the nodes can be expanded/collapsed initially based on some logic.
    It would be of great hhelp if any1 has some solution to it

    This doesnt work
    What i am doing:
    1. I have a TreeTable
    2. Its value is a TreeModel whose each node is my customized Object : MyObject
    So if i use this kinda code which is in ur tutorial
    CollectionModel model = (CollectionModel)tree1.getValue();
    treeBinding = (JUCtrlHierBinding)model.getWrappedData();
    I get a classcastexception:
    MyObject cannot be cast to oracle.jbo.uicli.binding.JUCtrlHierBinding
    since model.getWrappedData(); returns the root node of the tree which should be of my customized Object type

  • Displaying selection screen as pop-up from dialog box

    Hi,
          I have a screen which is of dialog-box type. This dialog screen shows an ALV and has a button in the ALV toolbar. On pressing this button, a pop-up screen is to be displayed. This pop-up screen is designed as a selection-screen. Is it possible to display this selection screen as a pop-up from a dialog box screen?
    Regards,
    Suhas

    Hi Suhas,
    Its possible to display selection screen as pop-up from dialog box.....Check the code below...copy paste and execute...
    SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE text-001.
    PARAMETER p.
    SELECTION-SCREEN END   OF SCREEN 123.
    CALL SELECTION-SCREEN 123 STARTING AT 20 5
                                ENDING AT 80 15.
    The below code might help u to add a button in alvgrid's toolbar......
    *       CLASS lcl_event_handler DEFINITION
    CLASS lcl_event_handler DEFINITION.
      PUBLIC SECTION.
        DATA: wa_toolbar   TYPE stb_button,
              calc         TYPE REF   TO cl_gui_frontend_services.
        METHODS : toolbar_handle FOR EVENT toolbar      OF cl_gui_alv_grid
                                        IMPORTING e_object
                                                  e_interactive,
                  ucomm_handle   FOR EVENT user_command OF cl_gui_alv_grid
                                        IMPORTING e_ucomm.
    ENDCLASS.                    "lcl_event_handler DEFINITION
    *       CLASS lcl_event_handler IMPLEMENTATION
    CLASS lcl_event_handler IMPLEMENTATION.
      METHOD toolbar_handle.
        MOVE   3 TO  wa_toolbar-butn_type.
        APPEND wa_toolbar   TO e_object->mt_toolbar.
        MOVE : 0            TO wa_toolbar-butn_type,
               'CALC'       TO wa_toolbar-function,
               '@0M@'       TO wa_toolbar-icon,
               'Calculator' TO wa_toolbar-quickinfo.
        APPEND wa_toolbar TO e_object->mt_toolbar.
      ENDMETHOD. "toolbar_handle
      METHOD ucomm_handle.
        IF e_ucomm = 'CALC'.   " When button added in toolbar is clicked
          IF calc IS INITIAL.
            CREATE OBJECT calc.
          ENDIF.
          CALL METHOD cl_gui_frontend_services=>execute
       EXPORTING
         application            = 'CALC'.
        ENDIF.
      ENDMETHOD. "ucomm_handle
    ENDCLASS.                    "lcl_event_handler IMPLEMENTATION
    DATA : container    TYPE REF   TO cl_gui_custom_container,
           grid         TYPE REF   TO cl_gui_alv_grid,
           event        TYPE REF   TO lcl_event_handler,
           it_display   TYPE TABLE OF mara,
           wa_display   TYPE mara.
    START-OF-SELECTION.
      CALL SCREEN 100.
    *&      Module  STATUS_0100  OUTPUT
    *       text
    MODULE status_0100 OUTPUT.
      SET PF-STATUS 'BASIC'.
      PERFORM build_it_display.
      PERFORM create_objects.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
    *       text
    MODULE user_command_0100 INPUT.
      CASE sy-ucomm.
        WHEN 'BACK'.
          SET SCREEN 0.
          LEAVE SCREEN.
        WHEN 'EXIT'.
          SET SCREEN 0.
          LEAVE SCREEN.
        WHEN 'CANC'.
          SET SCREEN 0.
          LEAVE SCREEN.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    *&      Form  build_it_display
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM build_it_display .
      SELECT * FROM mara UP TO 15 ROWS INTO TABLE it_display.
    ENDFORM.                    " build_it_display
    *&      Form  create_objects
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM create_objects .
      IF container IS INITIAL.
        CREATE OBJECT container
        EXPORTING
          container_name     = 'CUSTOM'.
        CREATE OBJECT event.
        CREATE OBJECT grid
          EXPORTING
            i_parent         = container.
        SET HANDLER event->toolbar_handle FOR grid.
        SET HANDLER event->ucomm_handle   FOR grid.
        CALL METHOD grid->set_table_for_first_display
          EXPORTING
            i_structure_name = 'MARA'
          CHANGING
            it_outtab        = it_display.
      ENDIF.
    ENDFORM.                    " create_objects
    Cheers,
    Jose.

  • Apple TV reboots when viewing photos and selecting slideshow mode

    Just purchased the A-TV, so only experience is with the 2.3 OS release. I can view my synced photos without issue, but when I select slideshow mode, the screen goes black for a few minutes and then the box reboots. The diagnostics state there is not a hardware problem, but this is hopefully not a 'feature' of A-TV. Help!

    Welcome to the  Discussion Forums.
    There could be a/some photos causing a problem, are you able to sync your photos in batches to try to eliminate this possibility.

  • Unable to select tunnel mode ipv6ip

    Hi.
    Please, can you explain why I am not able to select tunnel mode "ipv6ip" on my switch. I would like to configure tunnel from Hurricane tunnelbroker.net.
    switch-cisco-lab-cor(config-if)#tunnel mode ?  aurp    AURP TunnelTalk AppleTalk encapsulation  cayman  Cayman TunnelTalk AppleTalk encapsulation  dvmrp   DVMRP multicast tunnel  eon     EON compatible CLNS tunnel  gre     generic route encapsulation protocol  ipip    IP over IP encapsulation  iptalk  Apple IPTalk encapsulation  ipv6    Generic packet tunneling in IPv6  nos     IP over IP encapsulation (KA9Q/NOS compatible)switch-cisco-lab-core#show running-config interface tunnel 0Building configuration...Current configuration : 203 bytes!interface Tunnel0 description Hurricane Electric IPv6 Tunnel no ip address shutdown ipv6 address 2001:xxx:xxxx::2/48 ipv6 enable tunnel source 172.16.1.1 tunnel destination xxx.xxx.xxx.xxxendSwitch Ports Model              SW Version            SW Image                 ------ ----- -----              ----------            ----------               *    1 52    WS-C3560G-48TS     12.2(53)SE            C3560-IPSERVICESK9-M

    Hi,
    You need Advanced IP services feature set for IPv6 in IPv4 tunneling feature support.
    HTH
    Laurent.

  • Work Protect Mode Pop up

    Hi,
    I would like to get the source for the Work Protect Mode pop up that we see in the portal.
    Can anyone point out where can I get the actual source code?
    Regards
    J

    Hi Kai,
    Thank you for the response...
    I am not sure of the location of the text you suggested, but I found that
    text is maintained in CL_FPM_CONFIRMATION_REQUEST abap class. this text is divided in to two text 1) This application contains unsaved data which may be lost. and 2) Do you want to continue without saving the changes? And append this is the class constructor.
    We can change the text here... But thought changing the text is not a solution for my issue, so I need to address the root cause....
    I contacted SAP (raised an OSS message) and working with them on this, as of now we modified our logic in Value Determination BADI and it is working fine 90%
    Update: modified Value determination BAdi and V_T77SP_2 table entry to solve this issue!
    Thanks,
    Pradeep

  • Where the heck is theAutomation Mode pop-up menu

    sorry, I can't even begin to do the most basic mixing, because I can't find the Automation Mode pop-up menu. They say it is above the pan control, but no it's not anywhere! And the manual assumes you see it but... it's not there.
    Stupid question, sorry, but it's been over an hour of searching for this most basic of functions.

    okay... got it .. it's in the upper left corner of the mixer.
    poopy.

  • Placed an image in a new Illustrator document.  Tried to change the Output Mode in the Output Dialog but could not select "Separations Mode".

    Placed a DCS2 document image in a new Illustrator document. 
    Tried to change the Output Mode in the Output Dialog but could not select "Separations Mode".

    I would check with the makers of ULTRASEPS.
    I never heard of it, just checked their website, I don't think they support Illustrator:
    What do I need to use UltraSeps?
    UltraSeps requires Adobe Photoshop version CS2 or higher on Windows and Macintosh.
    Its also 100% compatible with Photoshop Creative Cloud and Creative Cloud 2014.

  • Howto pre-select "landscape" mode when printing?

    Hello,
    I am currently implementing an application which should be able to pre-select landscape-mode without forcing the user to open the PageFormat Dialog.
    I would be happy about any ideas, thanks a lot in advance, lg Clemens

    I was able to solve the problem by myself, however thanks for listening ;)
    lg Clemens

Maybe you are looking for