Suppress the Page Header section on a specific Section

Hello,
I have a single page word document I want to append to the end of a report I have, so I placed it in Report Footer b. The word document fits perfectly on a single page without any header. I tried simply supressing the Page Header on the last page but because of the length of the the word document it gets cut in half, so the 2nd to last page includes a header and forces the word document onto 2 pages (one with a header and one without). I tried supressing the Page header the last and 2nd to last page, but that results in the printing of an extra page as the word document without a header only takes up one page.
Is there some way to supress a section based on what section is currently printing ie.
WhilePrintingRecords;
Section "Report Footer b"
I am open to any suggestions on how to simply add a report footer section without a page header.
Thanks

Unfortunately that also suppresses on the 1st report footer section (RFa)
I tried adding an additonal conditon
OnLastRecord AND Pagenumber >= TotalPageCount - 1
However, this results in the addition of an extra blank page, which changes the page count to 1+ what it should be. This may confuse some users.
Can I specify a specific record? How would I go about doing that?

Similar Messages

Is it possible to suppress the Page Header of the Main Report based on the Section Name?

Hi,
I am fairly new to Crystal Reports XI. Is it possible to suppress the Page Header of the Main Report based on the Section Name? Thanks.

In the section expert you can enter a formula on the suppress function.
You just need something to check against if it is section name you say
{section name} ="Suppressme"
I have used it more in drill level to display headers based on how far you have drilled into a report.
Hope this helps
Eric
Via Christi Health System

Need a formula to suppress the page header for multiple pages

Hello Experts,
I have a report where I need to suppress the Page Header on 4 pages that have charts. There are two different charts that take up the full page, but my page header shows up at the top of the page.
I found a way to get the page header off of the first page with a formula in the Section Expert; Suppress; but I need to be able to do the same for the other 3 pages.
My formula that worked for the first page is: PageNumber = 2
I tried everything I can think of to add page numbers 15; 21; and 35.
Can you please tell me if this is possible and what I should do? Thanks in advance for your help.
Kathryn.

Do you know what pages you want to suppress?
If yes, can you use the suppress formula option in the Section Expert?
pagenumber in [1,2,3,4]
Hope this helps.
Edited by: Sharma Hari on Nov 18, 2009 9:01 PM

Dynamically suppress the page footer

hi, I have to design a report in which the page footer could dynamically be suppressed so that the main content could reach the bottom of the page.
I noticed that if I suppress the page footer by desygn the "flow" of page content stretches up to the buttom of the page but if I suppress it by code in the formula editor the page content doesn't arrive at the button margin and stops where the page footer would have begun if I hadn't suppressd it.
is there a way to dinamically suppress the page footer so that the "flow" of page content could stretch up to the bottom?
thank you in advance.

Yes it is possible
Code it.
Place the following code to your Crystal Report Designer. Use the same code for your page footer.
'--for Header--
Private Sub rptPageHeader_Format(ByVal pFormattingInfo As Object)
If PageNum.Value = 1 Then
rptPageHeader.Suppress = True
Else
rptPageHeader.Suppress = False
End If
End Sub
Where Pagenum is the object that tracks the current apge number.
Insert the "page number" field from the special field to your report.
OR
Right-click on the Footer Section, choose Format Section. click the button beside the Suppress (No Drill-Down) under Common Tab and place this code...
if pagenumber=TotalPageCount then true
else false
OR
[http://www.crystalkeen.com/articles/crystalreports/pagefooter.htm]
All the best,
Praveen

Pages 5.2.2 - how to add a logo in the page header

Hi, how can I add a logo in the page header of each page?!
seems header and footer only supports text and automated page numbering only...
I need some advise on this one
thanks

Add an image to any page in the section, then drag it where you want it to appear on each page.
Reduce the opacity using the slider in the Style pane of the Format inspector to change the object’s transparency.
Choose Arrange > Section Masters > Move Object to Section Master (from the Arrange menu at the top of your computer screen).

How can I put an image in the page header so that it will be repeated on every page?

Hi to everyone!
I want to create a Pages template with the logo of our company in the page header.
I'd like to put that image (logo) in the page header so that it will be repeated on every page but it will not modify the content of the page.
Anyone know how to achive this, or something similar without have to copy-paste that image every time we add a page to the document?
Thanks in advance

Takashi,
Turn off the Page Headers (not absolutely necessary, but since you don't need it, why not)
Put your Graphic on the page and make the following settings:
Then Insert > Text Box and make the same settings as for the graphic.
Place your "Header text" in the text box and arrange the box and graphic as you want them. Move both to Section Master using the Arrange menu.
Jerry

SQL expression field is not displayed on the page header if no records

Hello
I'm creating a quite simple report. In this report I've got a SQL expression field which returns a DateTime
I display this field on the page header section.
Everything is working fine except when my principal query doesn't return any records my SQL expression field is not displayed. It doesn't seem to be evaluated.
So, I would display this field even if my Details Section doesn't contains any record.
I hope you understand what I mean.
Can someone help me?
thanks

Hello,
I thought about creating a formula but the value I need is stored in a database.
So i created a simple SQL expression field.
SELECT CONVERT(DATE,j_1) FROM VW_STD_DATEFIXING
And this expression doesn't have any dependencies.

How to place aggregated fields in the page header or group header

Hi,
i have a report where in i have to display a header based on the aggregated value of a field
currently the field has values like
row1 blank
row2 blank
row3 Cookies
row4 blank
I wanted to know how to get the maximum of these rows in the page header i.e. it should come as Cookies for this case.
Is there any way to get this? it is easy in the footer where i can do a maximum of this field and get the value but not sure how to get this in the group header.How do we group maximum at the page header or group header?
Require your help on this at the earliest.
Thanks
Shilpi

Hi Shilpi,
>
Shilpi Sinha wrote:
> currently the field has values like
> row1 blank
> row2 blank
> row3 Cookies
> row4 blank
>
Do display these things in a subreport(i mean adda subreport in detail section). And Create a formula in the subreport itself with shared varible for assiging the maximum value ..
Then in the main report , create one formula with same shared variable and just display in Header secton..
Regards,
Salah.

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Same problem here (no graphics in header or footer) and the problem has been reported months ago. It is another bug/feature lost when Apple moves from 09 to the iCloud-compatible versions. Complain to Apple, you may have better chance than me and they may finally listen to their users....

SSRS 2008 R2 report does not print the page header for a html content displaying on multiple pages

Hi
I need to display the html content from the database. The html content are quite long and can have content of 3-5 pages. Issue I am facing is f the record has html content of 3-5 pages, then it does not print the page header (which is a separate tablix) on
second page onwards.
Nikesh Shah
Nikesh Shah

Hi Nikesh,
According to your description, I’m not sure the meaning of Page header in your scenario. In Reporting Services, a page header that run along the top of each page, respectively. Headers can contain static text, images, lines, rectangles, borders, background
color, background images, and expressions. But we couldn’t add tablix in the page header.
If you are saying report header, a report header consists of the report items that are placed at the top of the report body on the report design surface. They appear only once as the first content in the report. So it cannot repeat in other pages.
If you are saying tablix header, freezing column headers are different in table and matrix. For more details, please refer to the following thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c8ddc1af-1bdf-4e72-8aab-0353c7cc848a/ssrs-report-freezing-row-and-column-while-scrolling-issue?forum=sqlreportingservices
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to include the page header in smartforms

Hi,the text element of the type include text is placed in the main page in header.
this text element extending to several pages.
The user wants to include page header only on pages where this element displays.
EX:in the page they are 5 elements include text will appear from 3rd page.
then they want to display the page header only from 3rd page.
IS it possible?
Message was edited by:
hymavathi bomma

Hi!
You have to define more header objects.
You can use conditions, which object appears. You can use a flag variable for this: gv_header_flag.
Based on this gv_header_flag, you can tell the Smartform, which header to print.
And you have to fill gv_header_flag with correct values in some ABAP code, entered into your Smartform, before you print your header.
Regards
Tamá

How to change the page Header background colour in a Theme

Hello,
I want to know how to change the page header background colour. If you are in the Editor I don't find a property where to change it.
If you are in the Theme Editor in the header bar I want to change stands <b>Theme Editor</b>. This (in my case blue colored bar) I want to change in another color.

Hello Radhika,
thanks for your answer. Where do I find the option for the pageheader in System Administration>Portal Display>Theme Editor ->IView Trays exactly?
The pageheader is a picture, which must be uploaded for the web dynpro. Why should any webdynpro element in the ivew tray. There is no relationship between these two parts.
I have not found any option to change the web dynpro pageheader. Could there any extra theme editor for webdynpro?
Thanks.
Olaf

How to alter the page header in mode_show_help?

How can I change the page header on the page that gets opened by calling mode_show_help? I'd like to have the help pages maintain the consistancy of the look of the portal.
thanks,
adam

Hi!
You have to define more header objects.
You can use conditions, which object appears. You can use a flag variable for this: gv_header_flag.
Based on this gv_header_flag, you can tell the Smartform, which header to print.
And you have to fill gv_header_flag with correct values in some ABAP code, entered into your Smartform, before you print your header.
Regards
Tamá

How to change the page header?

Hi,
I just installed and started using Plumtree 6.0 a month ago, and we are still in a trial phase for our company's portal.
I want to change the default page header to replace Plumtree logo to my company's logo. I thought I can change it in the style sheet, but I didn't find where to change in the cssmill folder. I found an artical in edocs.bea.com saying I can modify the header by using ALI Publisher, but I don't know what's the right way to do it and faster.
Can someone guide me how to change the page header?
Thank you. (if this is not the correct forum to post the question, please let me know which forum should I go)

Depends on what you want to do. Personally, I'd do a header portlet and not touch the Plumtree/BEA logos. They're likely to be overwritten when the product receives updates.
This may seem like a lot of steps, but really - it goes quickly
** Think through what you want to display. If all you want to do is replace the image, but you wan to keep the overall layout style then you can create a simple replacement header
Step 1 - create a header portlet
=======================
If you're using Publisher...
=====
* Create a new portlet - choose the Header portlet template
* Upload your image / change the header in the rich text editor
If you're not using Publisher
=====
* Personally, static HTML will do just fine - create a folder and html file called something like "mybanner/mybanner.htm" on your remote portlet server
* Plop in an image (you'll want to swipe some adaptive tags for community and page name - can always stick those in later)
* Create a new remote portlet web service that references this HTML page
* Create a portlet from the web service - make sure the type is "header"
Step 2 - turn it on
=======================
* Create a new experience definition (or modify default - I usually create a new one so you can move it between environments)
* In the experience definition's "header / footer" settings area, tell the header to load from the new header portlet you created
* If you created a custom experience definition, modify your experience rules to load this experience defiintion according to whatever parameters you think make sense (just be careful you don't knock out your login page - we usually use security groups to just say "hey - the user is logged in and is, in fact, a member of this portal - that'll still let your login pages load)
Done
May seem like a lot of work, but really it's just a series of simple steps. Advantage here is you can vary things as you see fit and also just feel safe that the next time Plumtree/BEA updates those imageserver files you'll be good to go. From there you can get as fancy schmancy as you like using adaptive tags, etc. Heck - make it a .NET app if you want and do some crazy personalization or something. Embed stock tickers, important news alerts, whatever.
That help at all?
Thanks,
Eric

JavaHelp print shows null1/1 in the page header

I just noticed that when I print a page of the JavaHelp system, it puts the word null next to the page number in the header of the printed output. For example: null 1/2. Does anyone know if that is a bug in JavaHelp, or if maybe there is something I need to configure somewhere in JavaHelp?
Thanks for your help

Thanks for the reply. That is really an interesting solution with many new things, which I dont know. I have mixed both the solutions and adjusted them a bit.That helped reducing the blank pages. But the issue with both solutions is page header(orderid, quotepostas,function date, page number fields) is displaying only for new Function Date. For remaining pages the page header is not getting displayed. Actually the function information, can span across multiple pages, caz it has many other children. Ex: Function with date1 has information that spans across 3 pages, only in the first page the page header is getting displayed, in 2nd and 3rd pages only the function information is displayed, page header is not getting displayed. Actually I am using it this way..
<?for-each:Order?>
<?xdoxslt:set_variable($_XDOCTX,'z',count(xdoxslt:distinct_values(Function/Date)))?>
<?for-each-group:Function;Date?>
<?OrderId?>
Page num : <?position()?>
<?QuotepostAs?>
<?Date?>
<?for-each:current-group()?>
<?Date?>
<?Id?>
<?end for-each?>
<xsl:if xdofo:ctx="inblock" test="position()<xdoxslt:get_variable($_XDOCTX,'z')"><xsl:attribute name="break-before">page</xsl:attribute></xsl:if>
<?end for-each-group?>
<xsl:if xdofo:ctx="inblock" test="position()<count(//Order)"> <xsl:attribute name="break-before">page</xsl:attribute></xsl:if>
<?end for-each?>

Suppress the Page Header section on a specific Section

Similar Messages

Maybe you are looking for