Suppress the UCM login screen

Hi,
We are going to implement Single Sign On (SSO) using SAML. We can not use UCM login screen.
So Is it possible to Suppress the UCM login screen?
~Hari

Hi
As Kent mentioned with UCM 11g will use WLS security realms for doing all the security authentications .
In case of OAM / SSO (OID 10g case) steps needed were :
1. Create the SSO provider on WLS security realm . For eg if it is 10g SSO then it is SSO Provider and if it is OAM then OAMIdentityAssertor.
2. Create the identity store provider ( like LDAP authenticator , OID Authenticator etc) on WLS security realm .
Both these providers should be set to flag Suffiecient .
SSO provider should be the first in list .
Identity store provider should be second .
DefaultAuthenticator should be set to Sufficient as well so that users from identity store get the right set of security access .
After these 2 steps restart WLS and UCM server . Verify that JPS provider is showing status as good .
Hope this helps .
Thanks
Srinath

Similar Messages

  • When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    You can take some of the steps here, #4, #5 or even trying a #18
    Step by Step to fix your Mac
    but I suspect your going to first have to create a data recovery drive
    Create a data recovery, undelete boot drive
    to get your data off the machine,
    then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
    Step by Step to fix your Mac

  • Why do I get sent to the User Login screen to enter my password after sleep?

    Hi,
    On OSX Lion, 10.7.4. I recently had to reinstall the OS on a new hard drive in my iMac and now have an issue with it that I never had before.
    After prolonged periods of sleep (I haven't determined what the minimum length is before this will happen), when I come to wake the computer it shows me the User Login screen. Under my user icon is an orange checkmark, presumably to show that I am the user logged in. Otherwise it is exactly the same as the User Login screen one gets when the computer boots up. I select my user icon and enter my password and the computer unlocks.
    I haven't got this set up anywhere, that I know of. I don't have the 'Security & Privacy - Require password for sleep and screen saver' option checked, never have. If I do turn that on just to check, it's a very different password screen, a little popup window in the centre of the dimmed screen.
    How do I turn this feature off?
    Thanks,
    Owen

    Sounds like you may have deleted something you shouldn't have. Boot to an OS X DVD or a bootable backup, and using Disk Utility, do a repair disk, and while there repair permissions. Disconnect any peripherals, and reboot. If you get the same startup behavior, do a safe boot, by holding the shift key down when booting. If that works, try a normal boot. If neither step helps, you may need to relaod your operating system.

  • Running FF 17 I can no longer see the hotmail login screen. I have tried in safe mode, deleted cache and cookies, etc.

    Running any version of FF I cannot see the hotmail login screen. It acts like the page has loaded but it is blank.

    Under Web Console I see the following (refreshing doesn't help):
    [08:52:44.211] Unknown pseudo-class or pseudo-element '-webkit-scrollbar-button'. Ruleset ignored due to bad selector. @ https://login.live.com/login.srf?wa=wsignin1.0&ct=1354306710&rver=6.1.6206.0&sa=1&ntprob=-1&wp=MBI_SSL_SHARED&wreply=https:%2F%2Fmail.live.com%2F%3Fowa%3D1%26owasuffix%3Dowa%252f&id=64855&snsc=1&cbcxt=mail:6
    And
    [08:52:44.819] ReferenceError: evt_Login_onload is not defined @ https://login.live.com/login.srf?wa=wsignin1.0&ct=1354306710&rver=6.1.6206.0&sa=1&ntprob=-1&wp=MBI_SSL_SHARED&wreply=https:%2F%2Fmail.live.com%2F%3Fowa%3D1%26owasuffix%3Dowa%252f&id=64855&snsc=1&cbcxt=mail:1

  • I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

    I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

    Hey Dpcupcake,
    If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • I updated my iMac to lion and now when i leave my desktop and it goes into stand by it like a picture is taken of the screen and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopar

    i upgraded my iMac to lion and now when i leave my desktop and it goes into stand by mode, its like a picture is taken of the actice desktop and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopard. does anyone else experience this and is there a fix?

    I have an iMac 8, 1 that I upgraded Leopard to Snow Leopard.  It was totally updated with the latest from Apple when I bought and tried installing Lion.  The upgrade failed, shot my OS and I couldn't boot.  Had the constant spinner on a grey screen..  did a format of the drive, hdd repair and everything came back clean... got back to Snow Leopard and all the updates on it again and then retried the Lion thing... same bs... dead duck.  Crashed my system one too many times.  I can't see where a few small changes, mostly app related can be classified as an OS upgrade and is not compatible with my iMac.  I have the stuff running on my Mac Pro but have yet to notice anything impressive.  I've always used F3 and really didn't require Mission Control.  Just open you app folder for launch pad... duh?  I use the hot corners anyhow.  As far as Safari is concerned... as a power user, Apple missed the boat on that for me.. full screen etc.. Wow.  I don't like the new Mail either..
    As you can see/read, I'm less than impressed with this release from Apple but I own so many of their products that I will have to put up with it for now... somehow the MS logo should apply to this release Steve.

  • Removing a user name from the Skype login screen o...

    Hi, I want to remove a username from the skype login screen on a Samsung Smart TV, but haven't found any way of doing it.  I managed to remove a username on a laptop PC by looking up the Skype help but that method doesn't seem to work on the Smart TV - anyone got any suggestions? Thanks

    Hi
    There is a way of doing this, but it involves resetting ALL of the smarthub back it's default state - which would mean that you would have re-install any other apps that you have downloaded. 
    To do this, go to the SMART HUB menu and press the TOOLS button on the remote. WHen the menu appears, select the SETTINGS option and then RESET. You'll need to enter your PIN (if set) before you can reset the SMART HUB back to its factory default state. When it's completed, Smart Hub will update itself next time you go back to it, and you'll notice that all of the Skype Names are now removed from the sign in screen. 

  • CS6 trial installation stops at the initial login screen

    Hi guys
    I am new to photoshop and photography both. I bought a new PC yesterday with 4K LG display. The PC has gigabythe 9600 display card with 2GB RAM on it. Intel i7 quad core cpu 4 GHz, 16 GB RAM, 250 GB SSD, 1 TB HDD 7200 RPM. REst is on the board (lan and all). I have installed win  7 sp1.
    Downloaded CS6 and when I start installation it asks whether I want to try or install with a serial.  I click on try as I haven't bought it yet. It presents the lic agreement and after that asks me to log in. I click on log on button and it shows the busy circle. After a few minutes of that circle it shows an error saying that either the internet is not connected or the system date is wring. My internet is working fine and the system date and time is also correct. I reinstalled the system 3 times but same thing. It's not even showing the login screen. I tried to install without logging in but then it asks to login after the installation and shows the same error.
    The same installation works fine on a different laptop. Have I bought an incompatible machine?
    If it doesn't work than I will need to put it on ebay as I have no use of this powerful machine as I don't do any gaming.
    Your help is very much appreciated.
    Thanks in advance
    Shail

    Click here and follow the Mac OS X 10.4 instructions even though you're using Mac OS X 10.5.
    (48712)

  • After upgrade to Mavericks, a new gray screen appears just before the regular login screen.  The new screen appears for a few seconds with several boxes full of unidentifiable figures.  How can I remove?

    OS X Mavericks Upgrade Issue
    Now when I boot my iMac, a new gray screen appears for a few seconds following the Apple screen and just before the login screen.  The new screen shows several boxes with unidentifiable figures in them.  It has become annoying because it has never appeared before.   Anyone know of a way to stop this screen (of garbage) from showing?  Thanks…Larry

    It's possible that a PRAM reset may solve the problem:
    http://support.apple.com/kb/HT1379?viewlocale=en_US&locale=en_US

  • Any way to get the old login screen back?

    This login screen has no option to login with a microsoft account and for some reason it's not letting me login via skype name.

    illmatic wrote:
    This login screen has no option to login with a microsoft account and for some reason it's not letting me login via skype name.
    What exactly is the version of Skype installed on your computer? In Skype go to Help -> About Skype.
    Does the login screen look like this one?

  • Macbook Pro worked fine yesterday, today it won't boot past the password login screen. Any walkthroughs available to get it working?

    It powers up, gets to the login screen, accepts my entry, then stops.

    (NOTE: Running original start-up disk, I noticed OS on computer is 10.5.8 and the disk is 10.5.7)
    My actions/results:
    Verifiy Disk:
    - Incorrect block count for file system.log (Should be 920 instead of 463)
        Checking Volume Information:
          -The volume Macintosh HD needs to be repaired : ERROR: File system verify or repair failed
    - (popup) First Aid Failed. Disk Utility stopped verifying "Macintosh HD" because of error. File system verify or repair failed.
    Repair Disk:
    - Incorrect block count for file system.log (Should be 920 instead of 463)
    - The volume Macintosh HD was repaired successfully
    Verify Permissions:
    -Permissions differ on "private/var/log/secure.log" - Should be -xx-------, th
    -Group differs on "Library/Preference Panes" - Should be 0, group is 80
    -Permissions differ on "Library/Preference Panes" - Should be (xxxxx-xx-x)
    -ACL Found but not expected on "Applications/Time Machine.app"
    -ACL Found but not expected on "Applications/Utilities"
    - Permissions repaired successfully

  • How do I re-install the OS if I can't get past the user login screen?

    Hi. I recently was given a Mac mini. Great right? Problem is, it's used and it has two users with password protection and there us no way to get in touch with those people to get their passwords and log in.
    I thought I would just try putting in the OS X install disk and re-install the system and start fresh. I tried holding down the C key while starting up the computer. It still goes to the log in screen. Does that sound right? I tried that a few times, tried starting up in safe mode... every time it just goes to the log in screen. How do I get passed this? Are there any other ways to wipe the hard drive clean and do a clean re-install of the OS and not have to deal with the log in screen???
    Halp

    As long as you have the original OS X disks, follow directions here,about half way down the note, to change the admin password: http://support.apple.com/kb/HT1274

  • How to suppress the protocol dialog screen in ALV grid ?

    To check the values in the ALV grid we make use of the method add_protocol_entry from the class interface CL_ALV_CHANGED_DATA_PROTOCOL. The coloring of the wrong cells in the ALV grid is a nice feature but the popup screen that appears on every entry that is incorrect is not so nice. Is there a possibility to suppress this dialog screen without stopping the coloring feature? Or is there an other way to get this coloring feature in the specific cells of the ALV grid. We have already tried the emphasize option in the field catalog but in this case the coloring of a cell disappears when the cursor is set on the colored field in the ALV grid.
    I hope somebody can help us.
    Thanks and greetings,
    Ad Pegels
    Suiker Unie
    Netherlands

    As I understand by adding the PROTOCOL you are trying to validate some fields and display those with a different color.
    Instead, if you can validate and can change the color manually I think the pop ups can be avoided. All you have to  do is to add a nested internal table to the main internal table that has the display data. This nested table will be of type LVC_T_STYLE. You can add rows, one for each field that you want to display in a different color and also spcify the style in which you want to display.
    Once you do that those fields should be displayed with different colors.
    Regards,
    Ravi
    Note : Please allocate points if you find this useful.

  • Delaying to get the sap login screen

    Hi all,
    I am facing one strange problem and unable to understand it.
    When i run startsap all command, it is executing very successfully.
    But the problem is that when i try to log in to the system from sap gui it takes a very long time around 15 minutes with "waiting for response" status and then sap screen comes up.
    when i try to login with username and password again it takes some time to get the session_manager screen.
    In sm04 screen i do find around 6 to 8 sapsys users with type http plugin and client 000, after half an hour these are logged off automatically and system starts running smoothly as usual.
    This happens only when i do restart the sap system.
    Details,
    os- hp unix
    db- oracle 10g
    release - 700
    Need your precious suggestion and help.
    Thanks and Regards,

    Hello,
    >> In sm04 screen i do find around 6 to 8 sapsys users with type http plugin and client 000, after half an hour these are logged off automatically and system starts running smoothly as usual.
    I have seen that situation on some of our 7.00 system too.
    I was also not able to login and have seen (from dispmon), that the wps running some programs of SAPSYS.
    But i have these situations only after some kernel upgrade.. i have rebooted the sap system and after that it worked fine and never seen this again.
    Really strange.. but i have also no solution.. i have only rebooted the system and it worked for me..
    Regards
    Stefan

  • The annoying login screen after rebooting App server

    Is there a way to disable to login prompt after reboot the App server? IE offers
    to remember it, but it doesn't. Thanks for any info!
    Dinesh

    Hi,
    I have answered a similar question in How to logout an user when the browser is closed?
    Thanks,
    Sharmila

Maybe you are looking for

  • Help -- How to display Html text in a JEditorPane

    I'm trying to display html in a JEditorPane (html is obtained by transforming Xml and Xsl). So after i do the transformation i have a string which is the html source to be displayed. But when i use editorpane.setText(htmlString) method it is displayi

  • Most recent date with two other conditions met

    Ok, so I'm sure somebody is going to suggest that I do a search first before posting on here.  So let me assure you, that I have exhausted all search possibilities that I could possibly think of before registering to post on here.  I've read a lot of

  • UCCX 8.0(2) SPAN/RSPAN based VOIP Monitoring

    Hi Alll, UCCX 8.0(2) High Availability (both servers are co-located in data center, where agents and supervisors are in building across the street over fibre) SRND for UCCX 8 describes that it supports SPAN and/or RSPAN based voip monitoring, which i

  • LiveCycle: Change PDF Attachment name

    I have been able to customize the subject name and body of the email as well as create specific groups that the email needs to go through, but can not figure out how to change the file name to the attachement.  Currently its just a bunch of numbers a

  • I can't see image thumbnails in my library.

    not able to view thumbnails to edit . i set the image size to 12 megs file size and that didn't help. the pics are jpegs. the app will open the file and then I can see the pic. but it isn't the one I want. thanks, BottomShark