Suppress zero rows in file apd

hi experts,
i need to suppress zero rows in a file being ggenerated by APD.
Any suggestion how to proceed??

Dear Kevin,
Actually there is an option of appliying transformations in APD.
There is a transformation type of ABAP routine which you can directly drag and drop directly.So once getting the CSV file then apply transformations on it.
I think you can try this way
Regards,
Marasa.

Similar Messages

Suppressing zero rows using APD

Hello,
We are using APD to create a .csv file extract which is posted on the BW server. This file is created via APD using a query which in turn is loaded into a DSO. This data is then outputted into a .csv file. The problem is that we have a huge file, of which much of the rows contain zeros. Is there any way that the zero rows can be removed either before the datas is loaded into the DSO or during the extract from the DSO to the flat file. I cannot see any way to do this through APD functionality. Any help with this would be graetly appreciated,
many thanks,
Dave

Hi David,
Actually there is an option of appliying transformations in APD.There is a transformation type of ABAP routine which you can directlr drag and drop directly.So once getting the CSV file then apply transformations on it.I think you can try this way.This is my view.
Hope this helps
Regards
Karthik

Suppress zero rows in the query output.

Dear Experts,
We executed a query. In the output the values are displayed based on a hierarchy on gl account.
But in the output some rows dont have any values i.e 0 value. Still those rows are appearing in the report output.I want to
supress entire row. How to supress the entire row if no value i.e zeros are appearing in the query output.
Regards,
Bhadri M.

go to change mode of query
in that set the query properties /go to the query property secreen
in the "Display " tab set the supperssion as "active (all value=0)" and in structure properties select the check box "also use zero suppression for strucure element"
i think it will be help ful
Edited by: Soma Venkateshwarlu on Aug 28, 2009 2:40 PM

Zero Rows suppression is not working in Webi report.

Hello Gurus,
I have created a Web' report on top of BEx query. I am getting the report with Zero values. I want to suppress the rows with Zero values. When I ran the same query in BEx it is suppressing the zeros. (I have the property to suppress the Zero values int he query as active). Why Webi report is not recoginizing the property of the BEx query.
Please advise.
Thanks,
Aruna..

Hello,
I am facing the similar problem...I want to suppress 0 values in my report. I am using RDBMS - BOXI 3.1 SP1 (Reporting through Webi)
I have tried the above mentioned filter at Webi Level, but no luck.
Description       p1       p2       p3
Wages              0         0         0
Exp                   100      25       50
My requirement is the row, with all the columns with 0 should be suppressed.
Appreciate your help.
Thanks,
Anushka
Edited by: Anushka Bidesi on Aug 11, 2010 11:38 AM

Webi: unwanted zero rows suppression on BEx selection structure

Hello,
I have a Webi report/universe based on a BEx query having 2 structures: keyfigures in columns, characteristics selection structure in rows. We are still using BO XI 3.1 SP1.
Now: the webi report suppresses the zero rows of the char structure, but we do not want that. in the bex query, there is no active zero rows suppression.
I read in a similar thread about the opposite and that it will be fixed with XI 3.1 SP3:
Re: Zero Rows suppression is not working in Webi report.
Question: does anyone know, if "my" case is also solved by SP3? or anyone knows a workaround?
Unfortunately the PDFs XI31_SP3_Fixed_Issues_1of2.pdf and XI31_SP3_Fixed_Issues_2of2.pdf of SAP note 1457545 contain no information about this point.
Thanks and regards,
Phil

Hi Ingo,
thanks for the workaround tip!
In BEx query I tried with a calculated keyfigure set to "1" and alternatively with a restricted keyfigure set to "constant selection". Unfortunately, both did not work, the webi report was clocking long after the bex process was finished in BW.
Then I got error WIS 30284 ( universe connection corrupt) and 30285 (no free memory). But maybe we just have an issue with webi server performance.
anyway, thanks!
Best regards,
Phil
Edited by: Phil on Jun 23, 2010 10:42 AM

How to suppress Missing and Zero rows in OBIEE SA for Essbase Cube as Sour

Hi All,
Currently we have Essbase(ASO) cubes as source for OBIEE.How to suppress #Misssing and Zero rows in OBIEE.
For example, Dim1 having 4 members and Dim2 having 10 members then it shows 4*10= 40 combinations in Results.
If we considered Metrics also along with attributes, OBIEE will suppress “No Data” values and shows attributes having Data.
In Essbase-Excel Combination, Metrics will automatically comes with attributes so there we have option to suppress “No Data” rows under "Essbase Options".
In our current requirement,Users are selecting only Metadata.Is there any work around where we can suppress even if the measures or metrics are not selected
Thanks,
SatyaB

Thanks Deepak.
As i am new to OBIEE,If possible could you please tell me procedure in brief manner,How to create implicit fact column.Currently we have 10 dimensions.
So,Do I need to create individual implicit fact column for each dimension or one column is enough.
Please advice
Thanks,
SatyaB
Edited by: SatyaBodhanapu on Sep 29, 2011 1:16 AM

Crosstab issue: Suppress Zeros in Rows

Dear all,
We have a report in BO Design Studio with a crosstab.
In this crosstab I have some rows where all key figures are 0 (or empty).
In BO Analysis Office these rows can be suppressed via Filter >> Suppress Zeros in Rows.
How can we achieve this in Design Studio?
Kind regards,
Lieselot

Hi,
Maybe not exactly for your scenario but for similar ones it could be more useful:
A very interesting way of filtering data based on Key Figure values (Measures) is by using Conditions.
You can even change the values for your conditions dynamically directly from Design Studio either via user interaction (such as through a Dropdown or Prompt dialog) or only in the background via scripting (for example in the Application On Startup Event).
See this great post from Xavier Hacking about how it can be done: http://www.hackingsap.com/blog/sap-design-studio-and-conditions
So you could also create a simple condition for a "key figure value not equal 0" - that could be another option. The advantage is the possibility later to make some changes to the condition directly in Design Studio. But you do not need that if the rows with 0 values shouldn't be shown all the time (then you don't need to use a variable in the condition).
Regards,
David

How to hide zero rows from a structure

Hi
I have a month structue in rows which consists of 36 months. In the keyfigure coulmn also I have a structure with 6 keyfigures. In normal circumstances there will be values only upto 12 or 15 months. I want to hide the remaning rows. Is it possible.
I created a counter on one important keyfigure so that when value>0 it is 1 otherwise 0. I call this counter. Then I tried to create a condition to show only the 1. But while creating the condition after the keyfigure a column for month with the different elements of structure has to be selected. And of course the condition does not work.
Any suggestions how to hide the zero rows of structure
Ram

Right click on the key figure structure and characterstic structure select 'Properties' and check the option 'Also use Zero Suppression for Structure elements'.
Also from the query properties select the 2nd tab display and select the option Suppression "Active All Values = 0" and from Effect on Select "Rows and Columns".
Thanks.

File adapter don't want to ignore the header row in file

Hi gurus!
In my sender communication channel I specified Document Offset = 1 to spent the first row in file(header)
But it doesn't work.
Do you have any ideas?

Under Document Offset, specify the number of lines that are to be ignored at the beginning of the document.
This enables you to skip comment lines or column names during processing. If you do not make an entry, the default value is zero lines.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
But in Receiver File adapter
NameA.addHeaderLine=0
is used to have no Header line in the target structure
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm

How to suppress zero values in EVDRE Report?

Hello.
In my EVDRE Report I need zero values to be suppressed.
But SAP BPC NW 7.0 Help says that
The system does not suppress rows or columns returning a zero (where a zero amount is stored in the database)
So how can I suppress zero values?
P.S. In SAP BPC 7.0 for Microsoft platform "Suppress" parameter suppresses both zero and NULL values just like I need.
Thanks.

I have next options in EVDRE ExpandRange:
PARAMETER     EXPANSION 1     EXPANSION 2
ExpandIn     COL     ROW
Dimension     TIME     P_ACTIVITY
MemberSet     DEP     BASMEMBERS
BeforeRange
AfterRange
Suppress          Y
Insert
And my result is
     2009.JAN     2009.FEB     2009.MAR
EMPL1     1,00      1,00      1,00
EMPL2     1,00      1,00      1,00
EMPL3     1,00      1,00      1,00
PC     1,00      1,00      1,00
SQM     1,00      1,00      1,00
LABMAN     0,00      0,00      0,00
LABPRD     0,00      0,00      0,00
MACHRS     0,00      0,00      0,00
MAINT     0,00      0,00      0,00
NONE     0,00      0,00      0,00
MACH1     0,00      0,00      0,00
MACH2     0,00      0,00      0,00
MACH3     0,00      0,00      0,00
As you can see zero rows present.
I'm on SAP BPC 7.0 NW SP7.

DAC not populating FACT table for the GL module - W_GL_OTHER_F (zero rows)

All - We did our FULL loads from the Oracle Financials 11i into OBAW and got data in most of the dimension tables populated. HOWEVER, i am not seeing anything populating into the fact table W_GL_OTHER_F (zero rows). Following is a list of all dims / facts i am focusing towards for the GL module.
W_BUSN_LOCATION_D     (8)
W_COST_CENTER_D     (124)
W_CUSTOMER_FIN_PROFL_D     (6,046)
W_CUSTOMER_LOC_D     (4,611)
W_CUSTOMER_LOC_D     (4,611)
W_CUSTOMER_LOC_D     (4,611)
W_DAY_D     (11,627)
W_DAY_D     (11,627)
W_DAY_D     (11,627)
W_GL_ACCOUNT_D     (28,721)
W_INT_ORG_D     (171)
W_INVENTORY_PRODUCT_D     (395)
W_LEDGER_D     (8)
W_ORG_D     (3,364)
W_PRODUCT_D     (21)
W_PROFIT_CENTER_D     (23)
W_SALES_PRODUCT_D     (395)
W_STATUS_D     (7)
W_SUPPLIER_D     (6,204)
W_SUPPLIER_PRODUCT_D     (0)
W_TREASURY_SYMBOL_D     (0)
W_GL_OTHER_F <------------------------------------- NO FACT DATA AT ALL
Question for the group: Are there any specific settings which might be preventing us from getting data loaded into our FACT tables? I was doing research and found the following on the internet:
Map Oracle General Ledger account numbers to Group Account Numbers using the following file file_group_acct_names_ora.csv. Is this something that is necessary?
Any help / guidance / pointers are greatly appreciated.
Regards,

There are many things to configure before your first full load.
For the configuartion steps see Oracle Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users
- http://download.oracle.com/docs/cd/E13697_01/doc/bia.795/e13766.pdf (7951)
- http://download.oracle.com/docs/cd/E14223_01/bia.796/e14216.pdf (796)
3 Configuring Common Areas and Dimensions
3.1 Source-Independent Configuration Steps
Section 3.1.1, "How to Configure Initial Extract Date"
Section 3.1.2, "How to Configure Global Currencies"
Section 3.1.3, "How to Configure Exchange Rate Types"
Section 3.1.4, "How to Configure Fiscal Calendars"
3.2 Oracle EBS-Specific Configuration Steps
Section 3.2.1, "Configuration Required Before a Full Load for Oracle EBS"
Section 3.2.1.1, "Configuration of Product Hierarchy (Except for GL, HR Modules)"
Section 3.2.1.2, "How to Assign UNSPSC Codes to Products"
Section 3.2.1.3, "How to Configure the Master Inventory Organization in Product Dimension Extract for Oracle 11i Adapter (Except for GL & HR Modules)"
Section 3.2.1.4, "How to Map Oracle GL Natural Accounts to Group Account Numbers"
Section 3.2.1.5, "How to make corrections to the Group Account Number Configuration"
Section 3.2.1.6, "About Configuring GL Account Hierarchies"
Section 3.2.1.7, "How to set up the Geography Dimension for Oracle EBS"
Section 3.2.2, "Configuration Steps for Controlling Your Data Set for Oracle EBS"
Section 3.2.2.1, "How to Configure the Country Region and State Region Name"
Section 3.2.2.2, "How to Configure the State Name"
Section 3.2.2.3, "How to Configure the Country Name"
Section 3.2.2.4, "How to Configure the Make-Buy Indicator"
Section 3.2.2.5, "How to Configure Country Codes"
5.2 Configuration Required Before a Full Load for Financial Analytics
Section 5.2.1, "Configuration Steps for Financial Analytics for All Source Systems"
Section 5.2.2, "Configuration Steps for Financial Analytics for Oracle EBS"
Section 5.2.2.1, "About Configuring Domain Values and CSV Worksheet Files for Oracle Financial Analytics"
Section 5.2.2.2, "How to Configure Transaction Types for Oracle General Ledger and Profitability Analytics (for Oracle EBS R12)"
Section 5.2.2.3, "How to Configure Transaction Types for Oracle General Ledger and Profitability Analytics (for Oracle EBS R11i)"
Section 5.2.2.4, "How to Specify the Ledger or Set of Books for which GL Data is Extracted"
5.3 Configuration Steps for Controlling Your Data Set
Section 5.3.1, "Configuration Steps for Financial Analytics for All Source Systems"
Section 5.3.2, "Configuration Steps for Financial Analytics for Oracle EBS"
Section 5.3.2.1, "How GL Balances Are Populated in Oracle EBS"
Section 5.3.2.2, "How to Configure Oracle Profitability Analytics Transaction Extracts"
Section 5.3.2.3, "How to Configure Cost Of Goods Extract (for Oracle EBS 11i)"
Section 5.3.2.4, "How to Configure AP Balance ID for Oracle Payables Analytics"
Section 5.3.2.5, "How to Configure AR Balance ID for Oracle Receivables Analytics and Oracle General Ledger and Profitability Analytics"
Section 5.3.2.6, "How to Configure the AR Adjustments Extract for Oracle Receivables Analytics"
Section 5.3.2.7, "How to Configure the AR Schedules Extract"
Section 5.3.2.8, "How to Configure the AR Cash Receipt Application Extract for Oracle Receivables Analytics"
Section 5.3.2.9, "How to Configure the AR Credit-Memo Application Extract for Oracle Receivables Analytics"
Section 5.3.2.10, "How to Enable Project Analytics Integration with Financial Subject Areas"
Also, another reason I had was that if you choose not to filter by set of books/type then you must still include the default values set of books id 1 and type NONE in the list on the DAC parameters (this is a consequence of strange logic in the decode statements for the sql in the extract etl).
I would recomend you run the extract fact sql prior to running your execution plan to sanity check how many rows you expect to get. For example, to see how many journal lines, use informatica designer to view mapplet SDE_ORA11510_Adaptor.mplt_BC_ORA_GLXactsJournalsExtract.2.SQ_GL_JE_LINES.3 in mapping SDE_ORA11510_Adaptor.SDE_ORA_GLJournals then cut paste the SQL to run your favourite tool such as sqldeveloper. You will have to fill in the $$ variables yourself.

Hyperion Smart View - Suppress zero & #missing

Hi,
I just noticed today that Suppress zero & #missing rows doesn't work in hyperion smartview when planning forms are opened in it.
Is it necessary to check the suppress #missing rows in Hyperion planning while building the forms ?
Is it not possible that I have all the rows in Hyperion planning form and suppress #missing and zero rows in smartview form whenevr I like to?
Thanks in advance!!

Hi,
You will probably have to set the suppressions on the forms design side, suppress on the smartview side is more for adhoc analysis.
Cheers
John
http://john-goodwin.blogspot.com/

Imp is not importing zero rows tables

Hi....
I have successfully exported the schema......
But while importing into another DB, it is not importing zero row tables.....
Why it is happening like that.....is there any specific reason for that......
Plz help.....urgent....
Thanks in advance.

Hi
export is fine...in the log file it is showing all the zero row tables being exported
but while importing .....in the log it is missing the 5 zero row tables....
any way....
exp system/password file=/home/oracle/export_backups_manual/schema_backup_09_05_2011.dmp owner=schema_name log=/home/oracle/export_backups_manual/schema_backup_09_05_2011.log
imp system/password file=/home/oracle/schema_backup_09_05_2011.dmp fromuser=schema_from touser=schema_to log=/home/oracle/schema_backup_09_05_2011.imp.log
Thanks

Supressing Zero Rows after drilldown with a free characteristic

Hello,
during drilldown with the usage of a free characterictic, some zero rows are shown. If a key figure has no value for all columns, we would like to supress these rows, which are show up with the drilldown characterictic.
Especially drilldowning to account number level in our reports creates a confusing long list with a hundred of zero lines.
Can someone tell me how to suppress this zero lines?
Thanks,
Nuran

unfortunately that didn't work. I think so we need a general condition function, that we can say; when all the columns are zero then suppress this row, but with a standard condition function it seems also not possible to do this.
Message was edited by: Nuran Adal

Hide zero rows - have values in hidden col, but formula col in rpt is -0-

In Hyperion Reporting Studio, I have a report that's set up as follows:
Row1: Descendants of Projects
Columns: A - C are data columns (hidden)
D - formula [A] - - [C] (shown on report)
Basic suppression is chosen for row1. In the report, column D still shows any projects with -0- value. What settings do I need to use to suppress any rows where the formula (col D) = 0?
I've been going in circles with the Advanced Options, rounding, etc.
Thanks in advance for any help.

Basic suppression is chosen for row1. In the report, column D still shows any projects with -0- value. What settings do I need to use to suppress any rows where the formula (col D) = 0?From above what I can understand is that you want to suppress row when formula(col D)=0. Is so then this can be done by Using the Advanced Option in Conditional Suppression "Suppress Row If Data/FormulaValue in Cell" say D,1 Is Zero.

Suppress zero rows in file apd

Similar Messages

Maybe you are looking for