Suppressing a repeating field

This is my problem. I created a report, and I wanted one of my fields which is a name that repeats in the report. If I put the field as a group then the field stops repeating, but the field then repeats the grouping part again. Like so:
group 1
group 2
group 3 field 1 field 2 field 3
name 1 data data data
data data data
data data data
group 1
group 2
group 3 field 1 field 2 field 3
name 1 data data data
data data data
data data data
The problem with this is that the group 1 and 2 repeat. I want it to look like:
group 1
group 2
group 3 field 1 field 2 field 3
name 1 data data data
data data data
data data data
name 1 data data data
data data data
data data data
The other way I tried is taking group 3 the name and putting it as a field. This is where I get this repeating value. Like so:
group 1
group 2
group 3 field 1 field 2 field 3
name 1 data data data
name 1 data data data
name 1 data data data
name 1 data data data
name 1 data data data
name 1 data data data

Hi Brian,
It seems that you want a label "group #" that only prints on demand and not on every instance of the repeating frame.
You'll need to create a format trigger against the "group #" object. The format trigger allows you to both alter the style of the formatted object as well as suppressing the object completely.
To have it only print on the first instance of the repeating frame, create a count summary column in the group the repeating frame is based on. Then create a format trigger to return false when the summary is not "1".
Robin.

Similar Messages

Creation of HR infotype with repeated fields

Hi,
We have a requirement in our project where in we need to implement the repeat field screen structure.
We have to create an info type with 96 fields in which some of the fields are repeated more than once.
We have tried to create a table control to represent the repeated fields, for this we have a standard way which SAP follows. We have done the same way but we are not able to get the table control in the info type screen.
We have done the following steps using this link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/d52552575e11d189270000e8322f96/frameset.htm
1) I have created a structure with the repeated fields of the info type
2) created the entries in Mapping for Conversion of Repeat Structure/Tables (table T588AUTO_MAP) with the repeated fields
3) For each type LINE screen structure to be used, a corresponding entry was defined in Mapping for Conversion of Repeat Structure/Tables (table T588AUTO_TABLE).
4) I have created an info type with all these fields where in I should get the repeated fields in the table control format, but this was not happening.
Is there any task to be done to link all these transactions before going for creation of the info type?
Can any one suggest me how to get the table format on the screen with all these repeated fields.
with regards,
ramu mullapudi

Hi Choudhury,
Thanks for your reply. The infotype that you suggested solved my problem.
Regards,
RSS.

Sender FCC , problem with Repeating Field under a Sub-structure

Hi,
I have an Input File as
D,TH_ ,10/31/2008,ABC,pieces
PF, 10/31/2008,11/2/2008,11/3/2008,11/4/2008
P,mat,CS,100,120,130,125,150,170,120
P,mat,CS,100,120,100,110,140,120,110
I need to Implement an FCC to convert this to
a Structure like this
Recorset
    Header           1....1
        Unique Id
        date Time
        CustomerCode
        Code
        Unit
    Dates         1
     date          1....n
    Products       1....n
      product      1
      unit         1
      quantity     1.....n
This this is a Variable recordset type ( i.e each ROW has a Different Structure) the following keys D,PF,P are defined, for the header, dates, and Product Information.
The Following FCC parameters are applied
Document Name : MT_FILE_INPUt
Document NameSpace = http://xyz.com
Recordset Name = "Recordset"
Recordset structure = Header,1,Dates,1,Products,*
keyname              = Key
Keytype               = String
Header.FieldSeprator = ,
Header.FieldName = Unique Id,date Time,CustomerCode,Code,unit
Header.keyValue = 'H'
Dates.FieldSeprator = ,
Dates.Fieldname   = 'date'
Date.keyValue    = 'PF'
Products.FieldSeprator = ,
Product.FieldName = product,unit,quantity
Product.KeyValue = 'P'
Now the Problem is as Follows:
1) I have a Repeating Field Quantity under the Product and Date under the Dates Sub-structure, This is not getting Repeated at all.
Is there a Way to achieve the same
2) Another Point is That, i do not want to take the key Value in the XML structure after converion, is there a way to avoid it
Please let me know if any blogs are available
Any help would be appreciated.
Thanks,
Best Regards
Abhishek

can u try.. i haven't tired this.
quantity is occuring multiple times, but if that is fixed no# of occurance,, you can can try with this?
P,mat,CS,100,120,130,125,150,170,120
Product.FieldName = product,unit,quantity,quantity,quantity,quantity,quantity,quantity
let me try ..
As long as the quanitfy defined under Product.FieldName are more than the input msg quantity values (100,120..), you will be safe...
Edited by: Anand on Oct 31, 2008 3:54 PM

Hierarchy: How to suppress duplicated/repeated rows in a BEx query

Hi Gurus.
I have a BEx query which displays data based on a Cost Element hierarchy. When the hierarchy is expanded to leaf level (or any level), all key figures and characteristics are displayed for the leaf level but are also repeated throughout all the levels above.
Is it possible to suppress the repeated rows in higher levels of the hierarchy and display a summary result only?
The issue we have is that if the user wishes to export or save a workbook, they will have to filter and manipulate the report a great deal which is impractical.
I'm hoping it's a simple setting that I've missed. I look forward to receiving the magic answer!! :o)
Thanks,
Angela

Hi All,
I've been playing around a bit more and found a setting which I hope my users will find acceptable:
From the query - Query properties -> Data Formatting tab - Multidimensional View -> select Display Rows hierarchically and expand to (chosen characteristic)
Can anyone tell me if I can set this as a default setting in the query designer, or will I need to create a view to save the setting?
Thanks all,
Angela

Promoting a repeating field to a header field

I have a field that is a member of a repeating field and has the same value all throughout the report. I need the contents of this field to be placed in the header portion of the report.
I get the error..field F1 (which is my header field) references column (which is the repeating field) at a frequency below its group.
Can anybody suggest how to do it....
Thank you.

Hi,
just go to the data model and move the field which u r intended to be in header section move that in to group .
.. and in layout move the field to main group ....
reagards
Kiran

Adding a Repeating Field

Can I add a repeating field in a PDF, one where the end user can select to duplicate a field when filling out a form?
Thanks for your help!
Jeff

You can create a form with duplicated field in FormsCentral, then export it to Submission-Enabled PDF. But you may not add a repeating field in PDF, then import form to FormsCentral. but there's no limitation if you create PDF form with duplicated field, use it locally.

PDF template : how to have a multiple pages repeating field group

Hello,
I'm trying to create a PDF template.
My problem is that my repeating field group is composed of 2 pages, so what my request has to generate will be N * 2 pages.
But when I put the <?rep_field="BODY_START"?> and the <?rep_field="BODY_END"?> on two different pages, I can't generate the output.
It looks like those BODY_START and BODY_END has to be on the same page.
Could anyone confirm and/or provide help regarding my issue ?
Thanks in advance.
Regards,
Nicolas

Nicolaus, it appears as if Oracle is not willing to support templates generated using Adobe. They give us over a hundred pages on how to define an rtf template and then spend a measly 15 pages on PDF Templates. I have been successful in creating their example using the PO in the User Guide, but unsuccessful in repeating the outer group(which they don't tell you how to do or provide examples). So in summary you can print one PO at a time and the feature works great, but try to print more than one and you are screwed. Maybe it is time for someone from Oracle to make a post and make a believer out of all of us.

Repeating field values per paage in Master Detail Report

I know there are lots of threads about repeating fields values across pages but not seem to work that I have tried and I was looking for a simple resolution to my problem.
I have a master detail report like:
Deptno: 10 Dname: Accounting
Empno Surname Job Sal
1234 Smith Clerk 1000
1235 Jones Clerk 1200
Deptno: 20 Dname: Research
Empno Surname Job Sal
2234 Smith Clerk 1000
2235 Jones Clerk 1200
etc. The employee data is displayed in a Word table.
Now if I use the standard emp/dept tables (with only 14 employees) the report paginates properly and I see one department per page and the corresponding employees per page. I have used the <?split-by-page-break: ?> tag. A sample of the rtf file is:
<?for-each:dept?>Dept: <?deptno?> Name: <?dname?>
TABLE of EMPS (via insert -> table ->advanced etc)
<?split-by-page-break: ?>
<?end for-each?>
Everything works fine but if I then apply a larger xml file to this rtf where the number of employees spill over onto another page the deptno and the dname do not print before the table when I want them to.
I have tried putting things into Word headers, using the <?start:body?> tag and a couple of other ways (like @section). Could someone be quite explicit about the steps I need to follow (rather than just say put it in a header) to make sure that if the employees spill over the page the deptno and dname will display. I don't know if its made more difficult because I have multiple departments but any help would be appreciated.

I sent a template to Chris who was able to solve the problem.
The change that he made was from:
<?for-each:dept?>Dept: <?deptno?> Name: <?dname?>
TABLE of EMPS (via insert -> table ->advanced etc)
<?split-by-page-break: ?>
<?end for-each?>
to:
Dept: <?deptno?> Name: <?dname?>
<?start:body?><?for-each@section:dept?>
TABLE of EMPS (via insert -> table ->advanced etc)
<?end for-each?><?end body?>
That is, he used the start and end body tags and the section attribute and took out the <?split-by-page-break: ?> tag. I put back in the split page tag on the template he gave me but it gave me an extra page each time the department changed. So maybe you can really only use one of the other.
Regardless, Chris sorted it out for me, so thanks.

How to display repeating fields on PDF template?

I'm having trouble printing repeating fields on a PDF. I followed the BI user guide but the report generates only one row. The sample XML file has 6 employees. I want to print a row for each employee using PDF as my template instead of RTF document. My data source is XML file and I am currently on PeopleTools 8.50 and Enterprise Portal 9.1. Please help.
I have the form fields on the PDF as follows:
Name: body_start
Tooltip: <?rep_field="BODY_START"?>
Name: EMPNO
Tooltip: <?rep_field="T1_G1"?>
Name: ENAME
Tooltip: <?rep_field="T1_G1"?>
Name: JOB
Tooltip: <?rep_field="T1_G1"?>
Name: SAL
Tooltip: <?rep_field="T1_G1"?>
Name: body_end
Tooltip: <?rep_field="BODY_END"?>
-- XML file -----
<?xml version="1.0" ?>
<ROOT>
<LIST_G_EMPNO>
<G_EMPNO>
<EMPNO>7782</EMPNO>
<ENAME>CLARK</ENAME>
<JOB>MANAGER</JOB>
<SAL>2450</SAL>
</G_EMPNO>
<G_EMPNO>
<EMPNO>7839</EMPNO>
<ENAME>KING</ENAME>
<JOB>PRESIDENT</JOB>
<SAL>5000</SAL>
</G_EMPNO>
<G_EMPNO>
<EMPNO>125</EMPNO>
<ENAME>KANG</ENAME>
<JOB>CLERK</JOB>
<SAL>2000</SAL>
</G_EMPNO>
<G_EMPNO>
<EMPNO>7934</EMPNO>
<ENAME>MILLER</ENAME>
<JOB>CLERK</JOB>
<SAL>1300</SAL>
</G_EMPNO>
<G_EMPNO>
<EMPNO>123</EMPNO>
<ENAME>MARY</ENAME>
<JOB>CLERK</JOB>
<SAL>400</SAL>
</G_EMPNO>
<G_EMPNO>
<EMPNO>124</EMPNO>
<ENAME>TOM</ENAME>
<JOB>CLERK</JOB>
<SAL>3000</SAL>
</G_EMPNO>
</LIST_G_EMPNO>
</ROOT>
Edited by: user8260115 on Jan 27, 2010 9:21 AM

Can you advise me what needs to be done to view my pdf template with the given xml below. What would be the setup of my rep_fields.. I'm also getting the "FO Formatting failed" error when trying in BI Pub Template Viewer.
<LIST_BILL_SEG>
<BILL_SEG>
<CALC_AMT>5</CALC_AMT>
<BILL_SQ>0</BILL_SQ>
</BILL_SEG>
<BILL_SEG>
<CALC_AMT>10</CALC_AMT>
<BILL_SQ>1</BILL_SQ>
</BILL_SEG>
<BILL_SEG>
<CALC_AMT>15</CALC_AMT>
<BILL_SQ>2</BILL_SQ>
</BILL_SEG>
<BILL_SEG>
<CALC_AMT>20</CALC_AMT>
<BILL_SQ>3</BILL_SQ>
</BILL_SEG>
</LIST_BILL_SEG>

Display repeated fields label in data form

I have created an input form with periods & years in columns. One column for current period & year according to user selection and the other for Dec of prior year. Whenever Dec period is selected, the "December" word will not display in other column because it is the same. It seems like system default not to display for repeated fields. However, users would like to see it. Does anybody have any ideas/workarounds for this? currently, i typed in the word "December." with a dot at custom header to make it looks different so that the comparative column header will be displayed.

Hello Raul,
where can I change this setting? in workspace?
Thanks in advance.
JC

How to put non-repeating field in a repeating frame?

I have a formula field that creates the header for a list in a repeating frame. I seem to be in a quandary though-if I include the field inside the repeating frame the header gets repeated. If I put it outside the frame I get an error 'Field references Column at a frequency below its group'. If I move the formula column to the parent query it works except in the case where the child query returns no rows-then I get the header with no data.
So, I either need a way to display the header inside the repeating frame, but only once, or I need a way to suppress the header when the child query returns no rows.

So, I either need a way to display the header inside the repeating frame, but only once, or I need a way to suppress the header when the child query returns no rows.You can try one idea. Keep the formula column in detail group and create one more summary column as serial number for the detail records so in repeating frame place that field (formula column) in repeating frame and use the PL/SQL code for that field as below...
IF :serial_no = 1 THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;Then it should display for the first record only.
-Ammad

Hide/Suppress Cost center field in MIGO and MB1A for movement types 551&552

Hi All,
Can anybody tell me how to suppress or hide the cost center field in MIGO or MB1A for movement types 551 and 552?
I did below settings and it worked fine for only MB1A and for MIGO still it is showing cost center field.
IMG > Materials Management > Inventory Management and Physical Inventory >Goods Issue/Transfer posting > Define screen layout > select movement type to change the option.
Also I did gothrough the settings for Enjoy transaction (MIGO) there we have only option to make fields either "Required entry" or "Optional entry" and we don't have an option to hide/suppress.
Please advise or help me .
Thanks in advance!
Regards,
Praveen

Hi
The cost center field is a required field in mvt type 551 as you are scrapping materials, some cost center will need to take the cost of this operation.
Anyway, you first need to make the field as optional for example, before you move.
One option is that you create a screen variant in Tcode SHD0 for MB1A, where 551 is setup as constant (with content) , and mark Cost center as invisible and assign this screen variant to a transaction in SE93.
regards
Sidi

Repeating field on each page

Dear all,
My XML source:
<?xml version="1.0" encoding="UTF-8"?>

<XXAP_INVOICE_REGISTER>
<LIST_G_HEADER>
<G_HEADER>
<INVOICE_ID1>212884</INVOICE_ID1>
</G_HEADER>
</LIST_G_HEADER>
<CP_OPERATING_UNIT>CM</CP_OPERATING_UNIT>
<CP_RUN_BY>SYSADMIN</CP_RUN_BY>
<CP_REPORT_ID>AP-2006</CP_REPORT_ID>
</XXAP_INVOICE_REGISTER>
As you can see the fields with CP_ tags are OUTSIDE of the List_G_Header tags, how can I Repeat those CP_tags on each page on Microsoft WORD RTF template?
I am failed to put these CP_ fields into Header of WORD RTF template.
Thank you for assistance ~!

Thanks Nishka and Ananth, do you mean that I should insert a field or form field into the Header? But how to do so? Since I am not allowed to insert a BIP field / form field into the header.
Error message: " You cannot paste form fields into comments, headers, footers, footnotes, endnotes ..." (MS WORD 2003)
Thanks BIPuser, I solved my issue with your suggestion.
Edited by: jefftam on Oct 13, 2010 6:36 PM

Suppress Non Changed Fields in change pointer triggered IDOC

I have a requirement to clone message type MATMAS as ZMATMAS. This ZMATMAS is the message type I used to create change pointer triggering outbound idoc for change/create of materials.
When i change a material, all fields are sent instead of the fields only changed(of course key fields should be sent as well). Is there a way via configuration that I can suppress fields which are not changed? Or do i need to clone FM MASTERIDOC_CREATE_SMD_MATMAS and suppress the fields via program
Thanks in Advance!

i'll clarify the requirement again.
Let say i changed a field BRGEW in the material master.
Currently, all the segements which contains BRGEW is sent, but these segements contains other data which are not changed in the material master.
How do i suppress it?
Thanks,

Calculating values from repeated fields.

I have a subform that repeatable, how to i calculate a value from a fields from the repeated values?

Hi,
Try using the following FormCalc code on the "total" field which is outside of your repeating row/subform:
total.rawValue = sum(form1.Page1.Row1[*].Amount[*]);
Row1 - Repeating Row
Amount - Column dedicated to Amount
Hope this helps
Thanks,
VJ

Suppressing a repeating field

Similar Messages

Maybe you are looking for