Suppressing Warning and Error Dialogs in 8.2

All
I am looking into whether or not it is possible to suppress warning and error dialogs within a form created by LiveCycle Designer 8.2. I am aware this functionality is easily configurable within ES2 - which is the driver behind why I would like to get it working in some form within 8.2. Essentially, I would like no dialog boxes to appear unless explicitly done so via script.
Any ideas?

Just thought I would reach out one last time on this topic. To be more specific, I am looking for a means by which to "turn off" dialogs within a Designer 8.2 form. I still wish to use Validation patterns and perhaps Validation scripts but I don't want any dialog boxes to appear should any pattern or script be violated.
Any help would be appreciated.
Thanks in advance!

Similar Messages

System Warning and Error Messages in Plant Maintenance

Hi All,
Where can I find the list of system warning and error messages for Plant Maintenance?
Thanks
Andrew

Hi,
Follow the following path in SPRO. Some of the standard messages you will fond there:
Plant Maint & Customer Serivces - Maintenanace & Service Processing - Maint. & Service Orders - Message Control.
SM

Warning and Error

Hi all,
I am getting some Warning and Errors about some tables in SCC3 during the execution of Client Copy, Client Export and when consultant check their data then some table or missing which are showing in Warning and Error. one client copy is running for last 2 days.
the spam and SP level are same.
how can i retrieve these tables which are showing under Warning and Errors in SCC3?
Regards,
majamil

Hi Anil,
sorry for delay,
Dear, there is RFC System Comparision Option available in SCC9 while client comparison option is not .
I got some table are missing after RFC System Comparision. now how can i recover these tables?
and also I am stil getting same Warning and Errors regarding table during Client Copy, Client Export and
Remote client copy.
If I exclude these tables then how can i retrive these one on target system.
Regards,
majamil

Warning and errors

Below is what I get when trying to burn my project. I have one red stop sign - it's the first slide in the DVD map where it say to drag content here to automatically play. I want to do this, but can't seem to drag anything there. I have some yellow warning signs on the submenus where I do not have a movie, just text (saying that I don't have a movie for this area).
The following warnings and errors were found during the validation of the current project:
- There is an empty drop zone in your project. If you don’t add content to it before burning the project, it will appear as a grey area in your finished DVD.
- There seems to be too much motion menu content in your project. Correct this problem before you continue burning this project.

I have one red stop sign - it's the first slide in the DVD map where it say to drag content here to automatically play. I want to do this, but can't seem to drag anything there
What format is that content in?
I have some yellow warning signs on the submenus where I do not have a movie, just text (saying that I don't have a movie for this area).
That's probably a problem - why would you have a menu saying you don't have anything on it? I don't understand what you are trying to do.
There is an empty drop zone in your project. If you don’t add content to it before burning the project, it will appear as a grey area in your finished DVD.
That's a problem. In SOME cases you can delete the unwanted drop zone.
There seems to be too much motion menu content in your project. Correct this problem before you continue burning this project.
Is it 4:3 or 16:9? 16:9 only allows half the time 4:3 does. This usually happens when you drop a long movie (many minutes) into a menu drop zone (or as a button) and have it set to display a short (a few seconds) clip. In this case, edit the long movie to include just the short clip you want to see.

Warning and Error encounter while building web dynpro component

Hi,
I encounter this while building the web dynpro component. I am currently using NWDI 2004s SPS11. can advise? Thanks in advance
[Warning]: Path in Classpath for file webdynproadmin.jar not found.
[Warning]: Path in Classpath for file webdynproclientserver.jar not found.
[Warning]: Path in Classpath for file webdynpromodel_dynamicrfc.jar not found.
[Warning]: Path in Classpath for file webdynpromodelimpl.jar not found.
[Warning]: Path in Classpath for file webdynproprogmodel.jar not found.
[Warning]: Path in Classpath for file webdynproruntime_designtime_coupling_api.jar not found.
[Warning]: Path in Classpath for file webdynproruntime_designtime_coupling.jar not found.
[Warning]: Path in Classpath for file webdynproruntime_repository_pmr.jar not found.
[Warning]: Path in Classpath for file webdynproruntime_repository.jar not found.
[Warning]: Path in Classpath for file webdynproservices.jar not found.
[Warning]: Path in Classpath for file SapDictionaryTypeServices.jar not found.
[Warning]: Path in Classpath for file SapDictionaryTypesRuntime.jar not found.
[Warning]: Path in Classpath for file SapMetamodelWebdynproContent.zip not found.
[Warning]: Version for file webdynproadmin.jar not found.
[Warning]: Version for file webdynproclientserver.jar not found.
[Warning]: Version for file webdynpromodel_dynamicrfc.jar not found.
[Warning]: Version for file webdynpromodelimpl.jar not found.
[Warning]: Version for file webdynproprogmodel.jar not found.
[Warning]: Version for file webdynproruntime_designtime_coupling_api.jar not found.
[Warning]: Version for file webdynproruntime_designtime_coupling.jar not found.
[Warning]: Version for file webdynproruntime_repository_pmr.jar not found.
[Warning]: Version for file webdynproruntime_repository.jar not found.
[Warning]: Version for file webdynproservices.jar not found.
[Warning]: Version for file SapDictionaryTypeServices.jar not found.
[Warning]: Version for file SapDictionaryTypesRuntime.jar not found.
[Warning]: Version for file SapMetamodelWebdynproContent.zip not found.
Error The project was not built due to "Resource already exists on disk: / /bin/ProjectProperties.wdproperties.". Fix the problem, then try refreshing this project and rebuilding it since it may be inconsistent.
And have this error encounter:
Development Component Build (2007-07-02 15:14:00)
Component name: timeoff/gp/ui
Component vendor: test
SC compartment: test.sap.com_CAF-TIMEOFF-TST_1
Configuration: Tst_CAFDEV_D
Location: Tst_CAFDEV_D
Source code location: cocomo@cocomo
DC root folder: D:\projects\ExitMgt\1\DCs\test\timeoff\gp\ui\_comp\
DC type: Web Dynpro
Host: cocomo
DC Model check:
   All used DCs are available locally
   ERROR: Check for used DCs failed: Illegal component usage: compartment "test.sap.com_CAF-TIMEOFF-TST_1" does not use compartment "sap.com_SAP_JTECHS_1" of used DC "sap.com/tc/cmi"; using DC: test/timeoff/gp/ui(test.sap.com_CAF-TIMEOFF-TST_1)
   Build failed with errors.

Hi,
Make sure you have all these jars located in the folder C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.webdynpro.runtime_2.0.0\lib.
If they are not there, search for them in the plugins folder. They should be available at some other location. Copy them to the folder I mentioned above. Or you can modify the class path to point to the existing location.
Thanks
Ram

[SOLVED] Pacman -Syu Warning and Error

I want to update my system, but the first weird thing I notice after pacman -Syu is this warning message:
warning: dependency cycle detected:
warning: util-linux will be installed before its udev dependency
And then, when checking for conflicts, pacman throws this about some existing Xorg files:
(100/100) checking for file conflicts [######################] 100%
error: failed to commit transaction (conflicting files)
xorg-xmessage: /usr/bin/xmessage exists in filesystem
xorg-xmessage: /usr/share/X11/app-defaults/Xmessage exists in filesystem
xorg-xmessage: /usr/share/X11/app-defaults/Xmessage-color exists in filesystem
xorg-xmessage: /usr/share/man/man1/xmessage.1.gz exists in filesystem
Errors occurred, no packages were upgraded.
Is it safe to force the install with a pacman -Syuf? I prefer to ask for your advice before I end breaking something...
Last edited by isacdaavid (2012-03-25 17:49:24)

Thanks! All those files belonged to an orphan and now extinct package called xorg-apps.
pacman -Runs xorg-apps fixed the problem.

My Robohelp html 8 project won't open after one warning and error message

I'm currently using Robohelp HTML 8 and when I open my project I first get the following message:
After I click OK, I get this error message:
The project won't open after that. When I look ate my files they seem to be intact even though the message says the folder is missing from
Your help is greatly appreciated.
Thank you,
Joy

Hi Joy
Unless I'm mistaken, K would be a network drive, no?
Unfortunately RoboHelp is only one of a host of applications that doesn't fare well if you try to make edits to a project while it resides on a network drive.
Try copying the project to your local C drive. Perhaps create a folder named Projects and copy your project to a folder named Primo Intranet inside that folder so it looks like this:
C:\Projects\Primo Intranet
Once you do this, try opening your project again and you will likely have better luck.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Microsoft Remote Conenctivity Analyzer got warning and error Message

I got the following error when trying to test using Microsoft Connectivity Analyzer for Lync Server
Analyzing the certificate chains for compatibility problems with versions of Windows.
Potential compatibility problems were identified with some versions of Windows.
Additional Details:
The Microsoft Connectivity Analyzer can
only validate the certificate chain using the Root Certificate Update
functionality from Windows Update. Your certificate may not be trusted
on Windows if the "Update Root Certificates" feature isn't enabled.
Elapsed Time: 7 ms.
Testing remote connectivity for user [email protected] to the Microsoft Lync server.
Specified remote connectivity test(s) to Microsoft Lync server failed. See details below for specific failure reasons.
Additional Details:
Couldn't sign in. Error: Error Message: This operation has timed out..
Error Type: OperationTimeoutException.
Elapsed Time: 100029 ms.
I have installed the certificate correctly:
Certificate Purchased from Comodo PositiveSSL Multi-Domain.

Hi,
Please try to active the Windows feature “Update Root Certificates” and then test again.
If you doesn’t active the feature, the clients and federated partners running the impacted
Windows versions must install the corresponding root certificates manually.
How to get a Root Certificate update for Windows
http://support.microsoft.com/kb/931125
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How to fix such a warning and error ?

%dmesg|grep -i warn
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557)
%dmesg|grep -i fail
PM: Resume from disk failed.
FYI:
%uname -a
Linux myarch 2.6.32-ARCH #1 SMP PREEMPT Thu Jan 7 22:19:56 UTC 2010 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ AuthenticAMD GNU/Linux
Any suggestion is appreciated!
Last edited by sw2wolf (2010-01-21 02:48:15)

Error messages are tools to diagnose problems, not problems themselves. If you don't have an issue, then there's nothing to fix. You can't possibly expect us to know what the cause of a random error message in dmesg is. If it's not a problem, don't worry about it.

Set up Warning or Error Messages in CO54 and CO60

Hi,
I would like to find out where in SPRO can I maintain warning and error messages for transactions CO54 and CO60?
Thank you in anticipation.
Best regards,
Lyncel

Hi,
Thanks you for your email. However, I do not have specific message class or message number. Messages for CO54 and CO60 are needed for us to find out possible scenarios wherein it will trigger the error "Sending Message failed" in a custom transaction for TECOing process order. This custom trannsaction calls transaction CO%$ in sending messages and transaction COR2 to TECO the process order. If you could provide the transaction in SPRO wherein we could check the messages for CO54, CO60 and please include COR2 also.
Thank you,
Lyncel

Help Needed With Scripting and Error Messages

    I am working to build a script to change orders in SAP using Java. I begun by recording steps and combining them. I am having issues with the Warning and Error Messages. Can someone help me write language to have the script enter through the warnings or errors if they pop up, but move to the next step if nothing pops up?? Some orders have the message, some do not, some have multiples... etc...
Thanks!!

Hello Jamie.
Getting popup you can use an Loop like below (this is now for Excel VBA coded):
For Each subWindow In Session.Children
            If subWindow.Name = "wnd[1]" Then
                On Error Resume Next
                Session.FindById("wnd[1]").sendVKey 0
                Session.FindById("wnd[1]/usr/btnANSWER_YES").press
                Session.FindById("wnd[1]/usr/btnSPOP-OPTION2").press
            End If
        Next
For Messages in SAP session statusbar like this:
If Session.FindById("wnd[0]/sbar").Text <> "" Then ...
To catch error Messages defined by messagetype you can use this:
If Session.FindById("wnd[0]/sbar").messagetype = "S" Then ... 'sucess messagetype
If Session.FindById("wnd[0]/sbar").messagetype = "I" Then ... 'Information messagetype
If Session.FindById("wnd[0]/sbar").messagetype = "E" Then ... 'Error messagetype
Aso...like we have in SAP
Hope this help a bit to achieve your requirements.
Best regards,
Holger

"Network Error" dialog box - how to suppress?

Whenever my MacBook takes a long time to acquire a Wi-Fi connection, it puts up a "Network Error - This computer's Internet connection appears to be offline" dialog box -- an unhelpful statement of the obvious. It only just gets in the way and can lead to annoying flip-flops between Spaces. Is there some hidden preference I can set to suppress it?
George

I was able to correct issue by removing (mine had two) the networkinterfaces.plist file in the library-preferences-systemconfiguration folder.
It is automatically rebuilt upon restart and error disappeared. Hope it works for you.

My Apple G5 using operating system 10.6.8 keeps locking up. I get no warning or error message. I do get some intermittent screen distortion. Any ideas as to what could be causing this and how i get rid of this problem? Complete system re - install? N

My mac keeps locking up it s Power mac G5 Intel using 10.6.8 OS.X. I get no warning or error messages it just locks up and the only way to get it to work again is to depress power button and restart. Its random intermittent and incredibly frustrating. I do get some screen distortion from time to time and wondered whether it may be a graphics card issue or whether it could be solved with a complete system re-install and OS upgrade?

According to everymac.com, your Mac came with Tiger, 10.4.x and can't go any higher than Lion, 10.7.x.
It would have come with gray, machine specific disks. Since there's no reason to install 10.4.x first, and then Snow Leopard over that, just purchase a retail copy of Snow Leopard for $20. What you won't get with the retail version of SL is the iLife suite (Garage Band, iDVD, etc.) that were on the original bundled disks, but you can purchase iLife on Amazon pretty cheap, and get newer versions besides.
When you get Snow Leopard, you can boot to the DVD, erase the drive and install everything clean. Hopefully, you issue is only software, and not hardware related.

Suppress error dialog in automator

hi,
sometimes my automator app outputs an error dialog "watchmedo encountered an error".
this blocks the app to be restarted automatically (I schedule my apps on a repeated basis), as the app is still open.
how can I suppress error dialogs like this? or can I quit the app once an error is encountered?
those error dialogs (which only go away by clicking OK) kill the possibility to restart the app automatically ...
thanks.

Hmmm - it is supposed to throw an error when getting the ID. Another way would be to assign the ID to a variable, although you will need to enclose your application terms in a using terms from statement so that the compiler will know what application dictionary to use:
set theID to "com.apple.missingSafari" -- add/remove "missing" to test
try
    using terms from application "Safari"
        tell application id theID -- error if the ID doesn't exist
            get URL of tab 1 of window 1 -- or whatever
        end tell
    end using terms from
on error errmess
    beep
    log errmess
end try

Error dialog and message when SCA reference property saved in EM

In using EM to set the value of an SCA property on a composite reference instance -- the "TARGET_DIRECTORY" SCA property which is created by the File Adapter wizard when LogicalDirectory is specified and the token name "TARGET_DIRECTORY" is specified, I get an error dialog when saving the change:
Error performing the operation. Please view the log file for details.
The actual property value update is made even though there is an error dialog.
This is the corresponding server log message (note reference to JCA property LogicalDirectory in the trace -- not the property actually modified in EM):
Message Level     1
Component     soa_server1
Module     RMI
Host     eavlab56
Host IP Address     10.47.128.181
User     <WLS Kernel>
Thread ID     [ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'
Message     RuntimeException thrown by rmi server: javax.management.remote.rmi.RMIConnectionImpl.setAttribute(Ljavax.management.ObjectName;Ljava.rmi.MarshalledObject;Ljavax.security.auth.Subject;)
javax.management.RuntimeMBeanException: javax.management.RuntimeMBeanException: Update failed, unknown property: LogicalDirectory.
javax.management.RuntimeMBeanException: javax.management.RuntimeMBeanException: Update failed, unknown property: LogicalDirectory
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.rethrow(DefaultMBeanServerInterceptor.java:856)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.rethrowMaybeMBeanException(DefaultMBeanServerInterceptor.java:869)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.setAttribute(DefaultMBeanServerInterceptor.java:768)
at com.sun.jmx.mbeanserver.JmxMBeanServer.setAttribute(JmxMBeanServer.java:699)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$14.run(WLSMBeanServerInterceptorBase.java:378)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.setAttribute(WLSMBeanServerInterceptorBase.java:376)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.setAttribute(JMXContextInterceptor.java:234)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$14.run(WLSMBeanServerInterceptorBase.java:378)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.setAttribute(WLSMBeanServerInterceptorBase.java:376)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.setAttribute(SecurityInterceptor.java:358)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.setAttribute(WLSMBeanServer.java:294)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$9$1.run(JMXConnectorSubjectForwarder.java:551)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$9.run(JMXConnectorSubjectForwarder.java:549)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.setAttribute(JMXConnectorSubjectForwarder.java:544)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1449)
at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1264)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1366)
at javax.management.remote.rmi.RMIConnectionImpl.setAttribute(RMIConnectionImpl.java:683)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
javax.management.RuntimeMBeanException: Update failed, unknown property: LogicalDirectory
at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doSetAttribute(OracleStandardEmitterMBean.java:761)
at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalSetAttribute(ContextClassLoaderMBeanInterceptor.java:75)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doSetAttribute(AbstractMBeanInterceptor.java:124)
at oracle.as.jmx.framework.generic.spi.interceptors.MBeanRestartInterceptor.internalSetAttribute(MBeanRestartInterceptor.java:140)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doSetAttribute(AbstractMBeanInterceptor.java:124)
at oracle.as.jmx.framework.generic.spi.security.AbstractMBeanSecurityInterceptor.internalSetAttribute(AbstractMBeanSecurityInterceptor.java:142)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doSetAttribute(AbstractMBeanInterceptor.java:124)
at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.setAttribute(OracleStandardEmitterMBean.java:709)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.setAttribute(DefaultMBeanServerInterceptor.java:762)
at com.sun.jmx.mbeanserver.JmxMBeanServer.setAttribute(JmxMBeanServer.java:699)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$14.run(WLSMBeanServerInterceptorBase.java:378)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.setAttribute(WLSMBeanServerInterceptorBase.java:376)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.setAttribute(JMXContextInterceptor.java:234)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$14.run(WLSMBeanServerInterceptorBase.java:378)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.setAttribute(WLSMBeanServerInterceptorBase.java:376)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.setAttribute(SecurityInterceptor.java:358)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.setAttribute(WLSMBeanServer.java:294)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$9$1.run(JMXConnectorSubjectForwarder.java:551)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$9.run(JMXConnectorSubjectForwarder.java:549)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.setAttribute(JMXConnectorSubjectForwarder.java:544)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1449)
at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1264)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1366)
at javax.management.remote.rmi.RMIConnectionImpl.setAttribute(RMIConnectionImpl.java:683)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.lang.IllegalArgumentException: Update failed, unknown property: LogicalDirectory
at oracle.fabric.management.composite.mbean.Binding.verifyValidProperty(Binding.java:668)
at oracle.fabric.management.composite.mbean.Binding.setProperties(Binding.java:480)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doSetAttribute(OracleStandardEmitterMBean.java:753)
at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalSetAttribute(ContextClassLoaderMBeanInterceptor.java:75)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doSetAttribute(AbstractMBeanInterceptor.java:124)
at oracle.as.jmx.framework.generic.spi.interceptors.MBeanRestartInterceptor.internalSetAttribute(MBeanRestartInterceptor.java:140)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doSetAttribute(AbstractMBeanInterceptor.java:124)
at oracle.as.jmx.framework.generic.spi.security.AbstractMBeanSecurityInterceptor.internalSetAttribute(AbstractMBeanSecurityInterceptor.java:142)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doSetAttribute(AbstractMBeanInterceptor.java:124)
at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.setAttribute(OracleStandardEmitterMBean.java:709)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.setAttribute(DefaultMBeanServerInterceptor.java:762)
at com.sun.jmx.mbeanserver.JmxMBeanServer.setAttribute(JmxMBeanServer.java:699)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$14.run(WLSMBeanServerInterceptorBase.java:378)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.setAttribute(WLSMBeanServerInterceptorBase.java:376)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.setAttribute(JMXContextInterceptor.java:234)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$14.run(WLSMBeanServerInterceptorBase.java:378)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.setAttribute(WLSMBeanServerInterceptorBase.java:376)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.setAttribute(SecurityInterceptor.java:358)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.setAttribute(WLSMBeanServer.java:294)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$9$1.run(JMXConnectorSubjectForwarder.java:551)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$9.run(JMXConnectorSubjectForwarder.java:549)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.setAttribute(JMXConnectorSubjectForwarder.java:544)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1449)
at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1264)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1366)
at javax.management.remote.rmi.RMIConnectionImpl.setAttribute(RMIConnectionImpl.java:683)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Thanks Heidi. Some how, I think this might be related to the back and forth Jay Kasi and I have been having about the LogicalDirectory functionality of File Adapter. Coincidence that EM is complaining about that particular property in the trace?
Please see:
NPE validating a configuration plan in JDev
-Todd

Suppressing Warning and Error Dialogs in 8.2

Similar Messages

Maybe you are looking for