Supress Blank spaces

Hi all,
i want to suppress the Blank spaces is there any option I have tried in query properties by supressing zeros but i cant find the solution.
GL account      Amount
100000             10  
20000       
30000
40000
I want to show the report only G/L account 100000  and amount is 10 i dont need the remaining

Hi there,
Are you sure you don't have any more collumns? Because with only those two columns supressing the zeros in query definition (applied both to rows and columns) should do the trick.
Nevertheless you could create a new formula that is Amount different than zero, returning zero if false, and 1 if true.
Hide that formula, and create a condition to display only values where that formula is 1.
Diogo.

Similar Messages

  • Removing Blank Spaces caused by Supressed data

    Hi All,
    How we can remove the balank spaces caused by supressed data in crystal reports.for eg
    Item Code:I0002
                   Timer
                   For Time Info
                   100
    ItemCode:I00003
                   Pen
                   20
    if there is txt added against pen as for Timer(For Time Info)
    it will leave blank space.How to remove blank space.
    Thanks,
    Neetu

    Hi Neetu
    I have tried replicating your requirement at my end using Xtreme Sample database below are the steps which I have followed.
    1)I have customer Id field,Customer name field field placed in details section.
    2)Click on Section Expert
    3)Click on Details.
    4)Check the second option as "Suppress(No Drill Down)".In front of that there is one icon as "X-2".Double click on that icon.
    5) Type the below formula
         if {Customer.Customer ID}=157 and {Customer.Customer Name} ="Aruba    
         Sport" then true
        else if {Customer.Customer ID}=148 and {Customer.Customer Name}
         ="Koala Road Bikes" then true
         else false
    6)Save and close.
    With this formula where condition matches the specific criteria it will suppress the section and there will be no blank spaces.The rest of the data will be shown.
    Hope it will help you.
    Regards
    Asha

  • Instead of showing 0 in report its getting blank space

    Hi Sap Gurus.
    I am running the query in rsrt, in my report i am getting instead of 0 values it is showing Blank space. But in my source data there is value is 0. But when i execute the query its getting blank space. How to over come this problem.
    could u please let me know.
    Best Regards,
    venkat.

    Hi,
    Check out this.. it might solve your issue.
    in Query Properties
    Tab: value display >> Zero value Display >> Select "zero as Default Text"  under Display Zeros
    And Tab:  Rows/Columns >> Supress Zeros Option  >> "Do not Supress"  is selected.
    Thanks
    Jitu
    Edited by: Jitenderkumar Danduvia on Feb 23, 2010 12:45 PM

  • Fill with blanks(spaces) a VARCHAR2 type

    Thanks in advance,
    I have a VARCHAR2 type rtesta's var of length x(100 char)
    how i can fill(write) it without create a other varchar2 var that it'll be only filled with blanks(spaces). e.g
    rtesta := ' PC'||fil1||'xxx||fill2....
    where fil1 = say 10 spaces.. fill2 = 63 spaces and so on
    I would like something as
    rtesta := ' PC'|| RPAD(null,10)||'xxx||RPAD(null,63) ...
    but.... Oracle treats an empty string as null. And nulls are always a bit special within Oracle. Particularly, rpad('', n) and lpad('', n) returns null.
    Exists a built in for my problem?
    Thanks

    alter table your_table modify(your_column char(100));
    update your_table set your_column = ' '
      where your_clumn is null;  /* (added) But,this is no good for performance */
    alter table your_table modify(your_column varchar2(100));Exapmples.
    SQL> set null (null)
    SQL> create table test (vc varchar2(100));
    Table created.
    SQL> insert into test values ('');
    1 row created.
    SQL> insert into test values ('a');
    1 row created.
    SQL> insert into test values ('abcde');
    1 row created.
    SQL> select substr(vc,1,10) vc,length(vc) len from test;
    VC                          LEN
    (null)               (null)
    a                             1
    abcde                         5
    SQL> alter table test modify(vc char(100));
    Table altered.
    SQL> update test set vc = ' ' where vc is null;
    1 row updated.
    SQL> alter table test modify(vc varchar2(100));
    Table altered.
    SQL> select substr(vc,1,10) vc,length(vc) len from test;
    VC                          LEN
                                100
    a                           100
    abcde                       100----
    I misread OP's problem, sorry.
    Message was edited by:
    ushitaki

  • How to use blank space replace NULL on discoverer viewer

    Hi,
    There is a report that has a varchar field should show text values, and if NULL, I need it show blank space, and does in disco desktop, but on viewer, the same worksheet shows NULL.
    Even I changed in the Tools - Options - Format menu(desktop), it still show NULL on viewer.
    why?
    please help! thanks!
    sammy

    Hi Sammy,
    Unfortunately ‘some’ of the settings set in Desktop do not carry over to Viewer. These options need to be defined for Viewer itself.
    A temporary way to set the Viewer settings is to click on ‘Options’ when logged in Viewer itself. You’ll have to open a responsibility or report before this option becomes available to select. Within here you’ll be able to change the way NULL values are seen. However this method only makes the change for the User you logged in with.
    To make the change for all users, it’s best to edit the PREF.TXT file on the Discoverer Server. Please view the documentation below for more information on how to configure Viewer. For windows platform click here : http://download-uk.oracle.com/docs/html/A90287_01/toc.htm,
    For Unix platform click here : http://download-uk.oracle.com/docs/html/A90288_01/toc.htm. Once you’ve run the applypreference script, these settings will be forced down to all users of Discoverer.
    Hopefully this will help ;-)
    Lance

  • I recently deleted a partition on my mac that was intended to install windows. Now it is just blank space. I attempt to resize my Macintosh HD partition to cover entire hard drive space and hit apply but nothing happens (disk utility). Any ideas?

    I have a few problems...
    I wanted to make a partition to install windows, I tried to use bootcamp 5 where it wanted to partition and install windows at the same time. I do not have a cd of windows but instead had it on a flash drive. Bootcamp couldn't find it. Instead I was reading forums and found that there was another way to install windows by partioning your harddrive using the disk utility, downloading the bootcamp drivers, and installing rEFIt (an app that when starting the compouter a menu would come up to boot windows from the flashdrive). I try that and the windows install screen gets me to the point where I pick a partition. I attempt to pick the partitioned drive but a message comes up telling me that "this is of the GPT partition style" and windows cannot be installed on the drive.
    So now I went back to disk utility and deleted the partition but there is still blank space. I wanted to retry and install windows through bootcamp (somehow) but a message comes up that there cannot be any partitions or that a partition must be created using bootcamp. SO i keep trying to drag the partition over the blank space and hit apply but nothing happens.
    By the way I was trying to install windows 8 pro, some forums would say that you cant install win8 however I found others that said you could. How do I fix my partition and how do I use bootcamp to install windows (preferrably 8)?

    Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

  • Blank spaces in alv report

    hi experts,
    i have a requirement that i need to develop a report which is same as t-code cs11,
    but in cs11 we are getting the report for a single material and its bom components  .
    in my require ment  i need to develop a report for range of materials, i almost did that but the problem i am facing
    is how to obtain a blank space in alv report, after completion of single material  and its components r displayed.
    can any body pls suggest me.
    thanks&regards
    maheshlap

    hi srihari,
    i tried that but the blank lines r appending at the end of internal table.
    the following is the table ( t_main ) i am passing to the function module
    LOOP AT T_STKO INTO W_STKO.
        W_MAIN-STLNR = W_STKO-STLNR.
        W_MAIN-STLAL = W_STKO-STLAL.
        W_MAIN-STLST = W_STKO-STLST.
        W_MAIN-BMENG = W_STKO-BMENG.
        W_MAIN-BMEIN = W_STKO-BMEIN.
        READ TABLE T_MAST INTO W_MAST WITH KEY STLNR = W_STKO-STLNR .
        W_MAIN-MATNR = W_MAST-MATNR.
        W_MAIN-WERKS = W_MAST-WERKS.
        W_MAIN-STLAN = W_MAST-STLAN.
        READ TABLE T_MAKT INTO W_MAKT WITH KEY MATNR = W_MAST-MATNR .
        W_MAIN-MAKTX = W_MAKT-MAKTX.
        APPEND W_MAIN TO T_MAIN.
        CLEAR W_MAIN.
      ENDLOOP.
    can u pls send me some sampe code.
    thanks.

  • How to remove the extra or blank space from RTF Template

    Hi All,
    Try to remove the extra space from  xml template.
    Here I have attached the .xml file with .rdf, here the issue is when you load the data we will get 2 page output but when I am trying to add any column or extra space in the last page of this template the output getting 4 pages with lot of blank space. Could you please guide me to solve this issue.
    Could you please let me know how to do the attachement in this forum as I am new to this community.
    Regards,
    Sushant

    Can you drop in a mail with RTF, xml data to [email protected], I will help you on the issue.

  • RTF Template Blank Spaces Issue

    Hi,
    I have one issue in the RTF File. I have developed templates for the dunning letter report.
    If i have only one line in the main body table and below this table i have some contents information for the customer to print in the report. The issue is there is blank spaces between the table and the contents when i am printing one or two invoices in the report.
    I want to remove this blank spaces and bring the contents information to print just below the table even it is sinle report or many records in the report.
    please guide me if any one come accross with this issue.
    with regards
    Ram

    Hi,
    Make sure there are no spaces before/after your form fields - put them on their own line with no spaces in between. On their own line they don't generate an extra line.
    If you are still having problems email me the xml and rtf ggr888 [AT] gmail [D0T] com
    Regards,
    Gareth
    Blog: http://garethroberts.blogspot.com/

  • Lots of blank space when printing array with only last element printed

    I have a slight problem I have been trying to figure it out for days but can't see where my problem is, its probably staring me in the face but just can't seem to see it.
    I am trying to print out my 2 dimensional array outdie my try block. Inside the trying block I have two for loops in for the arrays. Within the second for loop I have a while to put token from Stringtokeniser into my 2 arrays. When I print my arrays in this while bit it prints fine however when I print outside the try block it only print the last element and lots of blank space before the element.
    Below is the code, hope you guys can see the problem. Thank you in advance
       import java.io.*;
       import java.net.*;
       import java.lang.*;
       import java.util.*;
       import javax.swing.*;
       public class javaflights4
          public static final String MESSAGE_SEPERATOR  = "#";
          public static final String MESSAGE_SEPERATOR1  = "*";
          public static void main(String[] args) throws IOException
             String data = null;
             File file;
             BufferedReader reader = null;
             file = new File("datafile.txt");
             String flights[] [];
                   //String flightdata[];
             flights = new String[21][7];
             int x = 0;
                   //flightdata = new String[7];
             int y = 0;
             try
                reader = new BufferedReader(new FileReader(file));   
                //data = reader.readLine();   
                while((data = reader.readLine())!= null)   
                   data.trim();
                   StringTokenizer tokenised = new StringTokenizer(data, MESSAGE_SEPERATOR1);
                   for(x = 0; x<=flights.length; x++)
                      for(y = 0; y<=flights.length; y++)
                         while(tokenised.hasMoreTokens())
                            //System.out.println(tokenised.nextToken());
                            flights [x] [y] = tokenised.nextToken();
                            //System.out.print("*"+ flights [x] [y]+"&");
                   System.out.println();
                catch(ArrayIndexOutOfBoundsException e1)
                   System.out.println("error at " + e1);
                catch(Exception e)
                finally
                   try
                      reader.close();
                      catch(Exception e)
             int i = 0;
             int j = 0;
             System.out.print(flights [j]);
    //System.out.println();

    A number of problems.
    First, I bet you see a lot of "error at" messages, don't you? You create a 21x7 array, then go through the first array up to 21, going through the second one all the way to 21 as well.
    your second for loop should go to flights[x].length, not flights.length. That will eliminate the need for ArrayIndexOutOfBounds checking, which should have been an indication that you were doing something wrong.
    Second, when you get to flights[0][0] (the very first iteration of the inner loop) you are taking every element from the StringTokenizer and setting flights[0][0] to each, thereby overwriting the previous one. There will be nothing in the StringTokenizer left for any of the other (21x7)-1=146 array elements. At the end of all the loops, the very first element in the array (flights[0][0]) should contain the last token in the file.
    At the end, you only print the first element (i=0, j=0, println(flight[ i][j])) which explains why you see the last element from the file.
    I'm assuming you have a file with 21 lines, each of which has 7 items on the line. Here is some pseudo-code to help you out:
    count the lines
    reset the file
    create a 2d array with the first dimension set to the number of lines.
    int i = 0;
    while (read a line) {
      Tokenize the line;
      count the tokens;
      create an array whose size is the number of tokens;
      stuff the tokens into the array;
      set flights[i++] to this array;
    }

  • Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display.  There is only a blank space that after about 1 minute, has a small box with a question mark.  How can I go back to attached images?

    Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display.  There is only a blank space that after about 1 minute, has a small box with a question mark.  Double clicking on the box will open the image in a separate window.  It's very slow and tedious for multiple images.  How can I go back to attached and displayed  images?  If I click on "Forward", the images appear instantly in the email to be forwarded.

    Scott,
    My problem seemed to fix itself.  Or, by shutting down the computer one night, instead of putting it to sleep, may have reset something.  Since updating to Mavericks, I always (or usually) let the computer sleep overnight or anytime I'm walking away from it.  A few days ago, I was updating notes for my kids about how to find all my stuff and how to turn on my computer, so I wanted to rewrite the start-up procedures for the iMac, just in case they ever need to.  Well, I shut it down one night so the following morning, I could write down each step.  Lo and behold, the images, etc. are all there again!  Solved, but I'm not sure why.
    Tom

  • How do I get rid of the blank space at the bottom of the new Firefox menu?

    The new firefox 4 has a different menu system. IT has blank space at the bottom wiht just a plus sign that opens new tabs. I can get that from the + sign by the tabs and don't want it or the rest of the blank space on the bar. I need all the space in the main window I can get. How do I get rid of this?
    Found my own answer, disable Conduit Engine toolbar, whatever the heck that is. Why it's enabled to start with is beyond me.

    Hi stephanie,
    These are unrelated questions/statements.
    Space before and space after a paragraph are controled in the Text Inspector, as you've found out.
    Pages will create a page break whenever there is no room for another line on the page. That break can come anywhere in a paragraph.
    You may be thinking of Widow and Orphan prevention, and the other Pagination controls, found under the More button in the Text Inspector. (If that's what you found, then thanks for the refresher! I hadn't been to that pane for awhile, and had forgotten the variety of pagination controls available.
    Regards,
    Barry

  • How to delete blank space from value of Infoobject in the transfer rule

    does anyboady know how to write a routine in the transfer rule in order to delete ending blank spaces from value of Infoobject 'ORDTEXT'. E.g. value: 'ABM    '?  After routine, the result should be 'ABM'.
    Thanks for any input.

    Deleting 'ending blank spaces' from a character type field (ie info-object or text) in SAP is not meaningful. For all usage, a char type field of length 8 having value  'ABM     '  is same as 'ABM'.
    Ok, HTML is changing the display in the above, so let me restate it
    For all usage, a char type field of length 8 having value  'ABM_____'  is same as 'ABM', take the underscore character (_) in the first string as a placeholder for space character.
    Edited by: Ajay Das on Jul 29, 2009 12:07 PM

  • How to supress blank page in scripts?

    Hi gurus.
    can any one let me know how to supress blank page in scripts? When one of my condition satisfies it should print two pages and its working fine. When condition fails, it should print one page but its printing blank page as second page.
    Waiting for your answer.
    Urgent
    Regards,
    surya.

    hi,
    1. By providing the control commands in scripts,u can supress the blank pages.
    2.write the data between protect and end protect.
    3.Enclose the text that you want to prevent page-break in PROTECT... ENDPROTECT
    SAPscript will ensure that each line of this text is printed together on the same page.
    /: PROTECT
    Text
    Within
    The same page
    /: ENDPROTECT
    Regards,
    SHIVA(reward if helpful).

  • How can I print a selection in Firefox 11 without it wasting paper and printing blank space in place of the non-selected material?

    In Firefox 10 and before, I could select a small portion of a web page and it would print the selected portion on a single page. In Firefox 11, it prints blank space for the portion above my selection before printing my selection. This blank space could span several pages, and my printer prints those several blank pages with only headers and footers.

    Still happens with Firefox 12. I wish they'd just fix it, the way it used to be in Firefox 10, without the complicated workaround suggested above.

Maybe you are looking for