Supress errors in SQLPlus
Hi,
Does anyone know of a way to suppress a specific ORA error in SQLPlus?
What I want to do is to Create a View with Force option and supress the informational error:
ORA-24344: success with compilation error.
Regards
HÃ¥kan
SYS cannot connect by itself, it can connect only with the SYSDBA or SYSOPER roles. Those roles are roles enabled by Oracle even before creation time, and those are used to perform specific adminstrative tasks such as install, recover, startup and shutdown, among others.
If you want to perform other administrative tasks when the database instance is already open you may use any other user with DBA privileges, such as SYSTEM.
In order to enable access as SYSDBA/SYSOPER your os user must be authenticated, either from the os (privilged dba group) or by means of the sysdba password , stored at the database password file.
~ Madrid.
Similar Messages
-
Shell Script: Timeout and return error if Sqlplus hangs
Shell Script: Timeout and return error if Sqlplus hangs
Dear all,
This morning, our production database hung with lots of ORA-600 and 7445. The issue has been escalated to Oracle Tech support but my monitoring script which tries to make a connection every 5 mins to the database to see if its up, did not alert me. The reason is that, it connected to the database and hung, never came out to report an error and so I never got alerted until a user called me.
Can any one tell me how I can exit from the sqlplus block if I dont get a response in x seconds? This sqlplus block is being called with in a shell script.
Any help is highly apprciated.I don't know of anything built into any shell scripting language that would do this, no. I'm not a Perl programmer, but I have a vague recollection that Perl may have something useful here.
From the "separate thread" part of my comment, though, you could certainly spawn a separate thread (thread 2), have thread 2 wait a period of time, then look for a message from thread 1 and throw an error if the message hadn't been sent. I don't know that I'd be for writing multi-threaded shell scripts, though. The heartbeat also gives you a layer of redundancy so that something is monitoring the monitor in case that process stops working.
Justin -
How to write errors in sqlplus script into logging table?
Hi,
I am having sqlplus script which do some DDL and DML statements.
Now is there any way to logg errors which pop up when the script is esxecuting?
For example something like:
WHENEVER SQLERROR EXIT SQL.SQLCODE
BEGIN
/* SOME DDL OR DDL */
CREATE TABLE A
COL_1 NUMBER,
COL_2 NUMBER
/* Wrong sql statement */
INSERT INTO TABLE_DOWS_NOT_EXISTS(....);
EXCEPTION WHEN OTHERS THEN
INSERT INTO logging_tbl (error_description) VALUES(SQL.SQLCODE);
END;
I know, this one will tell sqlplus to exit with sql error code without trapping into exception section, but is there any way to handle it?
ThanksAn approach would be to enable spooling in the beginning of your script. Wrap dbms_output into an error_log procedure. The error_log should simple write an errorcode + message to the prompt.<br>Afterwards - a search batchjob or manual search for errorcode occurances in the script spool file(s) should reveal the outcome.
-
Greeting gurus
it is some setup issue with sqlplus ?
I can run this sql using TOAD but when this sql is issued using sqlplus in the unix shell it gives the error below
We do . oraenv and gives the instance name but it still gives us this error
any help will really appreciated.
SQL> l
1* select count(*) from ahha_std.all_tables_tbl
SQL> /
select count(*) from ahha_std.all_tables_tbl
ERROR at line 1:
ORA-01115: IO error reading block from file (block # )
ORA-01110: data file 2: '+DATA1/ahhadb/datafile/sysaux.425.810935331'
ORA-15081: failed to submit an I/O operation to a diskWhy post this to the SQL and PL/SQL language forum? I see TOAD mentioned, SQL*Plus mentioned, and an Oracle server error posted.
Where is the SQL or PL/SQL language problem? -
Error starting SQLPLUS after updating Fedora Core 5
Hi,
I ran "yum update" on fedora core 5 and now sqlplus does not start anymore. I get this error:
sqlplus: error while loading shared libraries: /opt/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libnnz10.so: cannot restore segment prot after reloc: Permission denied
I understand it has something to do with the SELinux policy but how can I configure my system so Oracle still works AND the security policy still works ?
Thanks !!!
CoenHello,
This solution ( tail -f /var/log/audit/audit.log |tee oracle.log; audit2allow -M oracle < oracle.log; semodule -i oracle.pp)
worked for me. Can somebody explain what it did (I don't understand from the man pages)? ALso, how did this come to be. This happened to me right after a fresh install, and the machine got bounced.
All answers are apprecaited.
Thanks,
Edited by: user8674025 on Nov 27, 2009 9:59 AM -
Possible to supress error dialogs not related to a script?
I have a script that I want to run on AEP files that may have effects plugins that are not available on the host machine. I need to be able to supress the error message that says: This file is missing X number of effects. I tried using the app.beginSuppressDialogs in my script like this:
app.beginSupressDialogs();
that didn't work, so I used:
app.beginSupressDialogs;
that didn't work, so I used:
app.beginSupressDialogs(true);
that didn't work, so I used:
app.beginSupressDialogs = true
and that didn't work. So now I'm here again, posting to find an possible solution. How can I supress the error dialogs that are not a direct result of the script necessarily, but rather the project itself.
Thanks!Wait, I'm lacking sleep. I mis-spelled the method. It works with two p's in suppress.
Back to work -
How to get ORA Errors on SQLPlus in english
Hi,
I am running 10gR2 on american Windows.
Even I have set NLS_LANG=AMERICAN_AMERICA.WE8MSWIN1252
still getting oracle errros on SQLPlus in german :-(
What do I else need to change?
ThanksHi,
Are you sure that the NLS_LANG variable was correctly set up ?
C:\>sqlplus system/manager
SQL*Plus: Release 10.2.0.1.0 - Production on Dom Jun 10 21:43:40 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Conectado a:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> select * from mytable;
select * from mytable
ERRO na linha 1:
ORA-00942: a tabela ou view não existe
SQL> select * from nls_session_parameters;
PARAMETER VALUE
NLS_LANGUAGE BRAZILIAN PORTUGUESE
NLS_TERRITORY BRAZIL
NLS_CURRENCY R$
NLS_ISO_CURRENCY BRAZIL
NLS_NUMERIC_CHARACTERS ,.
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD/MM/RR
NLS_DATE_LANGUAGE BRAZILIAN PORTUGUESE
NLS_SORT WEST_EUROPEAN
NLS_TIME_FORMAT HH24:MI:SSXFF
NLS_TIMESTAMP_FORMAT DD/MM/RR HH24:MI:SSXFF
NLS_TIME_TZ_FORMAT HH24:MI:SSXFF TZR
NLS_TIMESTAMP_TZ_FORMAT DD/MM/RR HH24:MI:SSXFF TZR
NLS_DUAL_CURRENCY Cr$
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
17 linhas selecionadas.
SQL> exit
Desconectado de Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
C:\>set NLS_LANG=AMERICAN_AMERICA.WE8MSWIN1252
C:\>sqlplus system/manager
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Jun 10 21:44:12 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> select * from mytable;
select * from mytable
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> select * from nls_session_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
17 rows selected.
SQL> alter session set nls_language=german;
Session wurde geõndert.
SQL> select * from my table;
select * from my table
FEHLER in Zeile 1:
ORA-00933: SQL-Befehl wurde nicht korrekt beendet
SQL> select * from mytable;
select * from mytable
FEHLER in Zeile 1:
ORA-00942: Tabelle oder View nicht vorhandenCheers -
Hi,
I am working in oracle9i and solaris 5.8 ..
In OS level
$ if i give sqlplus means it shows error as
sh sqlplus : not found
then i export all the Environmental varialbles
again the same errror...
please tell me how to resolve this error
Regards...Hi sorry ,
There is no such character
ls $ORACLE_HOME/bin | grep sqlplus
/export/home1/ngptmis/bin: No such file or directory
bash-2.03$ echo $PATH | grep $ORACLE_HOME/bin
bash-2.03$
bash-2.03$ pwd
/apps/informatica/data/pc/SrcFiles/Teams
bash-2.03$
it shows like this
How to resolve this error -
Supress error message in reports 6i
I am brand new to reports.
I validate a date parameter in the AFTerFormParmater. If the
date is null (blanked out) I want to issue an srw error message
and reset the date on the form to a default.
I get the my srw error message but
then I also get a system error message about the "trigger failed"
how can I supress this message
in addition - how can I reset the date so it is not blank when
the parameter form is redisplayed.
I cannot run the report from a normal form as I have not taken'
the forms class yet. Everything needs to be done from reports
itself.Hi Dhananjaya,
also check this.
Messages allow you to communicate with users from your programs. They are mainly used when the user has made an invalid entry on a screen.
To send messages from a program, you must link it to a message class. Each message class has an ID, and usually contains a whole set of message. Each message has a single line of text, and may contain placeholders for variables.
All messages are stored in table T100. You create and edit them using Transaction SE91. Once you have created a message, you can use it in the MESSAGE statement in a program.
Also,
In SE91, you can see all the error message details.
For information, if the error message shows "V10222", you have enter the first three digits in "Message Class" and last three in "Number". This means, whatever the message number is, the last three digits has to be entered in "Number" and the value precedes this last three numeric value has to be entered in Message Class.
And finally,
Let me put it this way..
Every Error Message belongs to a Message Class.
So, a particular Message Class will have a number of Messages under it.
You need to know the Message class first. For Sales we have the following message classes V1, V10, V2, V4, V5, VD, VU, VV, VX, WVA
*If you want to know all the message classes available for a transaction:-*
For knowing all the Message Classes for a particular transaction, you goto-->SE93, put the transaction code and choose display. After this, there is a button on the top (Display Object List), press that button. On the left hand side you will get the Object Name-(example: VA in case of sales). Drop down there and choose Message Classes. You will get all the message classes there.
If you know the Message Class and want to see the Messages under it:
So, goto-->SE91, put the message class and choose Display
cheers,
Hema. -
Giving error as sqlplus is not recognised command
hi all
I want to log in through the Cmd of windows.
as
C:\> sqlplus
gives error
'sqlplus' is not recognized as an internal or external command,
operable program or batch file.Can you post here ORACLE_HOME?
and
C:\Users\Mahir>echo %PATH%
C:\Program Files (x86)\Common Files\NetSarang;C:\Oracle\App\Mahir\product\11.2.
0\oraclient\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windo
s\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\and set your PATH enviriment like my %PATH%.
C:\Oracle\App\Mahir\product\11.2.0\oraclient\bin; - my oracle client home + BIN path sqlplus is there
Edited by: Mahir M. Quluzade on May 5, 2011 11:56 AM -
Supress Warning on SQLPLUS output
Hello!
So, how can i supress warnings on sql plus output?
Let me explain
I have a install script with procedures and somethings have error dependences, this is ok, but i would like remove the "Warning: Procedure created with compilation errors" when execute.
Now, my header is
set verify off
set head off
set echo off
set feedback off
ALTER SESSION SET PLSQL_WARNINGS='DISABLE:ALL';
Thanks for help
Best regards
Felipe.sb92075 wrote:
when all else fail Read The Fine Manual
http://download.oracle.com/docs/cd/E11882_01/server.112/e16604/ch_twelve052.htm#i2700066
WHENEVER SQLERROR WARNING CONTINUESb, thanks for your reply
But the WARNING clause works only with EXIT.
I've tried WHENEVER, ALTER SESSION and DBMS_WARNING but without sucess.
Regards,
Felipe. -
Error using sqlplus when not oracle
I've been able to duplicate this same problem on two machines
running RedHat 6.0. Everything works great when I call the
Oracle binaries as oracle. Any other user priduces the following
errors.
[jkinney@hal jkinney]$ echo $ORACLE_HOME
/opt/oracle
[jkinney@hal jkinney]$ echo $ORACLE_SID
ORCL
[jkinney@hal jkinney]$ echo $LD_LIBRARY_PATH
/opt/oracle/lib
[jkinney@hal jkinney]$ sqlplus
SQL*Plus: Release 8.1.5.0.0 - Production on Thu Jul 22 23:07:01
1999
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: scott
Enter password:
oracleORCL: error in loading shared libraries: libskgxp8.so:
cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
[jkinney@hal lib]$ ls -al /opt/oracle/lib/libskgxp8.so
-rw-r--r-- 1 oracle dba 4847 Jun 14 16:20
/opt/oracle/lib/libskgxp8.so
jkinney : dba users
[jkinney@hal lib]$
Any ideas?
Thanks,
Jamie
nullI've had the exact same thing happen. I expected that
LD_LIBRARY_PATH would have taken care of this.
Anyways, the following commands worked for me:
(as root)
# cd /usr/lib
# ln -s /u01/app/oracle/product/8.1.5/lib/libskgxp8.so .
# ln -s /u01/app/oracle/product/8.1.5/lib/libobk.so .
# ln -s /u01/app/oracle/product/8.1.5/lib/libjox8.so .
Replace the /u01/app/oracle/product/8.1.5 above with the
ORACLE_HOME on your system.
Jeff
Jamie Kinney (guest) wrote:
: I've been able to duplicate this same problem on two machines
: running RedHat 6.0. Everything works great when I call the
: Oracle binaries as oracle. Any other user priduces the
following
: errors.
: [jkinney@hal jkinney]$ echo $ORACLE_HOME
: /opt/oracle
: [jkinney@hal jkinney]$ echo $ORACLE_SID
: ORCL
: [jkinney@hal jkinney]$ echo $LD_LIBRARY_PATH
: /opt/oracle/lib
: [jkinney@hal jkinney]$ sqlplus
: SQL*Plus: Release 8.1.5.0.0 - Production on Thu Jul 22 23:07:01
: 1999
: (c) Copyright 1999 Oracle Corporation. All rights reserved.
: Enter user-name: scott
: Enter password:
: oracleORCL: error in loading shared libraries: libskgxp8.so:
: cannot open shared object file: No such file or directory
: ERROR:
: ORA-12547: TNS:lost contact
: [jkinney@hal lib]$ ls -al /opt/oracle/lib/libskgxp8.so
: -rw-r--r-- 1 oracle dba 4847 Jun 14 16:20
: /opt/oracle/lib/libskgxp8.so
: jkinney : dba users
: [jkinney@hal lib]$
: Any ideas?
: Thanks,
: Jamie
null -
I just installed oracle9i client for linux and I run SUSE8.1 After the installation, I tried launching sqlplus from $ORACLE_HOME/bin and I get this message:
error while loading shared libraries:linInstsh.so.9.0: cannot open shared object file: No such file or directory.
I checked my $ORACLE_HOME/lib and I can't find that file too. Any help please ?Pls check if you have set ORACLE_SID, and ORACLE_HOME environment variables.
hth -
Supress error log display in editable ALV
Hi,
I am using an editable ALV to get input. Some of the fields in the grid are assigned a check table. So when a entry which does not exist in the check table is made for these fields ALV by default displays a error log.
Is there any way to supress the display of this error log and collect the errors in this log to some internal table? I want to do this because apart from the standard validations done by the ALV i am performing some validations in the program and displaying a log. So i want to capture the error log of the ALV and display them in my log so that 2 error logs wont be displayed.
Thanks in advance,
Tongston Immanuel.I'm building a kind of feature, where you can go different ways in a tree, based on a condition. The values for this condition are entered in an ALV-grid, which is a table with fields of type C(30). However to have a F4 help, I fill in ref_field and ref_table in the fieldcatalog. Most of the time, this works fine, but for fields of type NUMC, even if no F4 help is available, this doesn't work since internally it wants to convert this NUMC field to my CHAR field and it fails.
I refreshed my log table in the DATA_CHANGED event. Thanks for your suggestion! -
How can i supress error message
hi Al,
I am getting an error message on screen , i want to supress this and hold data from screen , how can this be done,
Regards
AnujHi,
you mean you don't want to flash these error messages but wants to hold them ,in this case just try to use FM 'MESSAGE_TEXT_BUILD'
CALL FUNCTION 'MESSAGE_TEXT_BUILD'
EXPORTING
msgid = sy-msgid
msgnr = sy-msgno
msgv1 = sy-msgv1
IMPORTING
message_text_output = g_message.
where you can also pass the particular message class and message numbers also and in g_message you will get the message text.
Maybe you are looking for
-
Customer account statement has issue with dual currency.
Hello Experts, As per your clients requirement we have modified the form for customer account statement for ETHIOPIA. In the requirement we have asked to get the opening balance of the customer. For example we are running the report for the period 0
-
Time machine: need to use an now unsuported program.
Hi! My dad just updated my Mac book Pro to Lion. In doing so, made a program he uses called Palm Desktop incompatible, and he needs some files from it. I believe he regularly backed up with Time Machine. My question is this: is it possible for h
-
how do u change fonts in smart forms?
-
Has anyone used the Rage iWeb SEO tool with any success?
-
Anyone able to use Google Docs with Safari?
In Safari 6, I always get this error when I open any docs: https://docs.google.com A server error occurred. Please press 'Reload' in your browser. (screenshot: http://d.pr/i/qalj) Of course, reloading doesn't work. Any one else have that problem or