Supress Header and Trailer from being generated and printed

I am using oracle 9i Reports Builder.
Is there a way to supress the header and trailer pages from being generated and printed.

Increase the marigin size to zero size header and trailer in the layout editor and then run the report.

Similar Messages

Preventing .jpeg files from being generated/saved

I'm trying to capture a graph on the front panel into an .html file using the case structure in the attached .vi. The case structure works but I keep getting a jpeg file in the form of CT0327xxxxxxx.jpeg saved in the C:\vibration data directory each time a capture is performed. How do I keep this image from either being generated or saved? Thanks in advance.
Message Edited by GSO on 09-12-2007 10:33 AM

Sorry. Here it is.
Message Edited by Dennis Knutson on 09-12-2007 11:18 AM
Attachments:
Append Image.PNG ‏46 KB

How to remove repeated header and print "No records" in report

Hi,
I have a problem with my output report it is repeating the header when no records was found. And does anyone knows how i can put "No records found" (when no record is found) in the output without the Total amount and Grand Total? Please refer to the attachent file for reference.
Thanks a lot! Hope someone can help me.
Cheers,
Jen
Report ID: CRMR2W26 PARTIAL LOAN PREPAYMENTT MONTHLY SUMMARY REPORT Report Date: 08/04/2008
For the month of March
SR Creator SR No. Sales Opty Id Cash Amount($) CPF Amount ($) CIF No. Customer Name Salesperson Name Domicile Branch SR Status
Domicile Description
Branch
Code
Total amount
Grand Amount
Page 1
Report ID: CRMR2W26 PARTIAL LOAN PREPAYMENTT MONTHLY SUMMARY REPORT Report Date: 08/04/2008
For the month of March
SR Creator SR No. Sales Opty Id Cash Amount($) CPF Amount ($) CIF No. Customer Name Salesperson Name Domicile Branch SR Status
Domicile Description
Branch
Code
No records extracted
Page 1
Message was edited by:
user618088

This sounds like a Reports issue.
Perhaps you would be better asking in the Reports rather than the SQL and PL/SQL forum.
;)

Stopping Reports from Being Generated

When I first tried Network Magic I set up the reporting function. Essentials which I finally purchased does not have the reporting function but my computer is still trying to send reports. How do I turn that function off.

I am fairly new at this so let me try my best to answer these questions:
Crystal Reports XI
Visual Studio? Not sure
No service pack applied. How and where do i get it?
I am using Windows XP
I am not viewing the reports as it has to be generated before i am able to view and the systems does nothing after I click the generate button
No have not tried to view a single report; i don't know how.
I have not used Crystal reports designer for anything else.
Edited by: Sharon Aird on Dec 1, 2008 5:05 PM

Help in Reports 6i - Header and Line

Hi Gurus,
I have a requirement that I need to pull the Header and Line information in the custom oracle apps report.
If header record is not there for the filter criteria then I should display 0 in the header and print the corresponding lines for the header.
If header record is present and there is no line record for it then I need to pull the header record alone and no lines for it.
If both header record and line records are there then I need to pull the header record and corresponding lines for it.
I am pulling the header record from the table prior to the parameter <period_from>
I am pulling the lines record from the table based on the parameter between <period_from> and <period_to>
Pls note that header record will have always only one record for the lines and the line record may not have or may have 1 or more line for each header.
Kindly could you advise me as to how to make this happen.
Thanks,
Geno
Edited by: Geno on May 7, 2010 6:15 PM
Edited by: Geno on May 7, 2010 6:28 PM

Hi,
I created a "Formula" in order to retrieve the image. The File Format type set to Image, Read from file set to Yes. Use this "Formula" in the layout module and the image display on the report.
Remarks: In my case, the images are stored in a physical drive.
Hope this help.
Regards.

Emails not being generated using UDF

Hi,
We had setup a functionality to send email via UDF using the following blog.
Mail without email adapter? Part - I - Process Integration - SCN Wiki
This worked fine for some time. However, it does not generate emails anymore. There were no changes done on the objects. We checked the java mail service settings as suggested in some of the SCN posts and everything looks configured fine.
We are not able to determine what is preventing the emails from being generated. Any pointers would be really helpful.
We are using SAP PI 7.31 java only installation.
Thanks,
Ravi

Hi Ravi,
Did you check SMTP services availability?
SMTP Configuration in SAP XI - Process Integration - SCN Wiki
Regards,
Krupa

Identifying triger point & stoping an idoc from getting generated in SD

We have 2 boxes
KLE 420 ( CRM box) & KLE 430 ( SC box)
As per original business flow
1) Sales order is generated in 420 ( order type Z001, item category ZAN1 )
2) idoc is generated and message/details is transferred to 430 ( Z002, ZAN2 )
3) in 430 the delivery & shipment is created and idoc is generated and transferred back to 420 where the invoicing happens.
As per new flow
For some selected orders, the initiation(SO) and processing needs to be completed in 430 (SC) only
When I run an order cycle, a few things I need to know is
1) how do I identify for which steps in the order cycle, an idoc is being generated
2) how can I stop this Idoc from being generated ?

Hi there,
From my experience I have seen IDOCS triggered by O/p types that are assigned to SD documents in SAP.
If that is the case, then check the sales orders what O/p types it is triggering & which O/p is triggered by EDI.
Delete the condition records for that particular O/p which is triggered by EDI. This will make the O/p not generated.
Also remove the O/p type in the determination procedure of you dont need that O/p at all. Or in the requirment routine, specify a condition like sales org or order type for which the O/p should trigger. So basing on the condition you mentioned, system will trigger the O/p accordingly.
If IDOCS are not triggered by the O/p type, then it is trigered by an external prog. In that case, specify a condition (like above) that system should not trigger the IDOCs.
Hope this helps.

How to generate Header and Trailer for a file

Hi Guru
How can we generate header and Trailer for a file
EX:
i want to generate header with date and trailer with record count from table.
Sample file :
20120120
fwsfs
adfwsfd
adff
afsadf
afdwsg
adgsg
adgsgg
asgdsag
sdgasgdaf
sdfsagfadf
10

Hi ,
1.Create an interface to load data from oracle to file and set generate header as false option in IKM .
2.Create variable get_current_date of alphanumeric datatype and implement logic SELECT to_Char(SYSDATE,'yyyymmdd') FROM DUAL under refreshing tab
3.Create variable get_record_count of numeric datatype and implement logic SELECT '<%=odiRef.getPrevStepLog("INSERT_COUNT")%>' FROM DUAL under refreshing tab
4.Create a package
Drag the get_current_date variable ,
Drag odioutfile and paste the below logic OdiOutFile "-FILE=D:\ODI_TEST\emp.txt" "-CHARSET_ENCODING=ISO8859_1" "-XROW_SEP=0D0A" #GET_current_date in command tab
Drag the interface
Drag another variable get_Record_count
Drag the odioutfile and paste the below logic OdiOutFile "-FILE=D:\ODI_TEST\emp.txt" -APPEND "-CHARSET_ENCODING=ISO8859_1" "-XROW_SEP=0D0A"
#GET_RECORD_COUNT in command tab
Link all these in sequence,save and run the package.
OR Modify the IKM SQL to File Append to achieve same functionality.
Thanks,
Anuradha

Header and footer in PDF files generated from Business Publisher

Hi All,
Is there any out of box feature to include Header and Footer of our choice in the Pdf file of Process Model generated from Business Publisher (from Print function in the publisher explorer)
Thank you all in advance.
regards,

Hi Raja,
Does this mean that you have been sucessful in generating the PDF from the BPublisher?
If yes, could you please share how you achived this. Platform .. version ect. you have.
I am trying to create the PDF , but my IE popup just ... well ... just disappears..
thanks
regards
Sanjiv

Generating Header and trailer sections in reports..

Hi all.
I want to generate reports, that has both a header- and a trailer section page.
Usually this was part of the template report, but in Designer 9, the generator first converts the template report (.rdf) to a template report (.tdf), and is then using this template.
But where is the header- and trailer page? You can't see them in the reports builder, when looking at templates, and the generated report does not contain any header- nor trailer pages.
Have I missed something?
Any replies welcome...
Benny Albrechtsen

I have the same question. This is what I found on Metalink.
goal: How To Define A Header/Trailer Section In A Reports Template Definition File (TDF)
fact: Oracle Reports Developer
fix: It is not possible to have a HEADER/TRAILER section in a Reports Template Definition File (TDF). Templates do not need to have a HEADER/TRAILER section, infact there is no sectioning in a template. They just define the visual layout when applied against a report section.
This did not answer my question!

Extracting body with header and trailer multiple times from a multirow file

Hello Everyone,
I am new to OSB and currently working on a project where I need to extract data from a flat file containing multiple rows of body and a single header and trailer in the following fashion:
Original File:
<Header></Header>
<Details></Details>
<Details></Details>
<Trailer></Trailer>
Desired format using OSB:
<Header></Header>
<Details></Details>
<Trailer></Trailer> ... in a single file, multiple times
Please help me in carrying out this functionality. It's really urgent and important.
Thanks,
Saurabh

Some may argue this is not the right forum - database general might have been a little been than downloads - but now the thread is here I'll try an answer.
As I see it It depends on your spooling tool.
Lets assume you are using sqlplus.
I that case the sql prompt command may serve your purpose
Alternatively
select 'header' from dual
union all
select field1||','||field2||','field3 .... /*must single string expression but may concatentate field */ from somtable
union all
select 'trailer' from dual;may suit.
However I fear either I have not understood the question or if I have understood the question that you may have difficulties implementing this.
Edited by: bigdelboy on 19-Apr-2009 14:32

How Do I Stop the Header and Trailer From Printing

When ever I print a page from my web browser Firefox 8 it also sends to the printer a header containing the page name and the URL and at the bottom of the page it prints a trailer which consist of a page number such as 1 of 2 and a date and time.
How do I stop this?
The trailer is causing havoc when I print mailing labels on ebay. Ink is getting smeared from one printed page to the next.
Firefox had always done this but now that I am using Avery labels (8.5x11.5) sheets split into two labels it is causing problems. Once the top half of the label it used I flip it over and print on the other half. The "used" part of the label will not hold ink, hence the smearing problem with the trailer.

''Answer provided was for the default installation of Firefox. It doesn't account for user changes to the UI.'' The Menu Bar with the File menu item isn't the default in Vista or Win7 versions of Firefox, only for WinXP. When the Menu Bar doesn't show, the orange Firefox button appears. (grey button on Linux)
That setting should hold until you change it again, and will apply to all pages. You may need to restart Firefox.

Tables in header and trailer subforms

I'm trying to create a form which would generate a report containing assets from our ERP system. The very first version is in attachment. The output of report should be splitted to individual pages according to change in column "asset class" of imported assets. I achieved this successfully by creating conditional breaks. So now I have report which generates for every asset class collection of subforms: heading + n x body + trailer. Each heading appears on new page.
The problem occurs when I try to insert table into heading or trailer subform. This leads to strange behavior visible in PDF attached. The table has 2 rows and 3 columns. In the last trailer subform it is displayed fine. In all other trailer subforms generated after conditional break all rows and columns are rendered on the same X and Y coordinates so they cover themselves. The same occurs in heading subform. I want the tables to be shown correctly.
I would appreciate any suggestion and help...

Hi Prashant
You can use a combination of external table and multi table insert. In ODI 11g there is a Oracle Multi Table Insert IKM. You will have to have one interface which has the source as the file and the target is a temporary target. The LKM will use LKM File to External Table, the IKM will use Oracle Multi Table IKM, and it will set DEFINE_QUERY. Also the LKM should set DELETE_TEMPORARY_OBJECTS to false. Then define 2 interfaces to load your 2 targets for example. The first target loading interface will use the 1st interface as a source and the MTI IKM again will use the MTI IKM and set IS_TARGET_TABLE to true and execute to false. Then the second target loading interface will use the 1st interface as a source and the MTI IKM again wil set IS_TARGET_TABLE to true and execute to true.
Cheers
David

Header and trailer pages in report templates

Hi:
I wonder how can i make header and trailer pages in the tamplate reports , so that the objects in the template header & footer report would be inherited to the generated reports. I use Oracle reports 6.0.8 and there is no header section, niether Trailer section in the Template Editor, I've read in the reports online help :"You can use the margin and body of the Header and Trailer sections to create a Header and Trailer page as in earlier releases. In future releases, you will be able to add and delete sections.", is there any method i can use to make header&trailer pages in the template.

I have the same question. This is what I found on Metalink.
goal: How To Define A Header/Trailer Section In A Reports Template Definition File (TDF)
fact: Oracle Reports Developer
fix: It is not possible to have a HEADER/TRAILER section in a Reports Template Definition File (TDF). Templates do not need to have a HEADER/TRAILER section, infact there is no sectioning in a template. They just define the visual layout when applied against a report section.
This did not answer my question!

RESTORE - Kernel   Bad page - header and trailer not matching

Hello,
I have a Problem with the recover of my backup.
When i want to make a restore of the Database this error is shown in Logfile KNLDIAGERR
2008-11-26 21:20:38                               --- Starting GMT 2008-11-26 20:20:38           7.5.0    Build 032-123-111-699
2008-11-26 21:26:57      0xE0C ERR 20005 Kernel   Bad page - header and trailer not matching
2008-11-26 21:26:57      0xE0C ERR 20006 Kernel   Header [ 5277032 - data - tab - checksumData - empty ]
2008-11-26 21:26:57      0xE0C ERR 20007 Kernel   Trailer[ 0 - data - nil - chckNil - empty ]
2008-11-26 21:26:57      0xE0C ERR 52015 RESTORE write/check count mismatch 5277032
2008-11-26 21:26:57      0xDFC ERR 52012 RESTORE error occured, basis_err 300
2008-11-26 21:26:57      0xDFC ERR 51080 SYSERROR -9026 BD Bad datapage
any Help ?
thanks a lot
Steven

Hi Steven,
the database kernel checks with every read the header trailer. If it got a mismatch during read the error message you got is logged.
The same checkes will be executed when you create a backup. You told us that the backup could be executed without any errors and that the system where you created the backup is ok as well -> you executed a Check data?
Now everything looks like the error is in the backup and happened during writies to the external backup medium. Or the backup is ok and then the error happens during read from the external medium.
To get closer to the reason where the problem is located I need to have some more information.
1. You did the restore several times?
2. Did the bad Data Page shappens always on the same page -> Check knldiag.err
3. Did you do your backup on tape?
4. Did you try to create a backup into a file?
5. Does the restore from file got the error as well?
Regards, Christiane Hienger

Supress Header and Trailer from being generated and printed

Similar Messages

Maybe you are looking for