Supress message in status bar when using Call Transaction
Hi,
I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
As this was a Flowrack storage type we will assign Source HU during TO confirmation. So I went for a BDC.
But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
Please let me know for more information.
Thanks,
Manoj.
>
kaka79 wrote:
> I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
> But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
> I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
The CTU (CALL TRANSACTION ... USING ...) captures and stores all the messages into the message internal table (... MESSAGES INTO itab ...), but they are not displayed. So, if one of them appears in the status bar, it's because there is an additional MESSAGE ... statement in the program using the CTU. So look at it and add a condition before the MESSAGE statement to not output this exact message (click the message on status bar to get the message number, or debug the program to get it from the message internal table).
Similar Messages
-
Display a message in status bar when error in a block based procedure
Hi
I have a block based on procedures.
If I have an exception when I try to insert a record for example, how can I display a user friendly message in the status bar ?
here is my insert procedure :
PROCEDURE emp_insert2(t IN emptab) IS
BEGIN
FOR i IN t.first..t.last LOOP
INSERT INTO emp (empno, ename, job, hiredate, sal)
VALUES(t(i).empno, t(i).ename, t(i).job, t(i).hiredate, t(i).sal);
END LOOP ;
EXCEPTION
When DUP_VAL_ON_INDEX then
Raise_Application_Error( -20002, '^This identifier already exists^' ) ;
END emp_insert2;When I use the ON-FORM trigger and ERROR_CODE and ERROR_TEXT variables, I get an FRM-XXXX message saying :
40735--INSERT-PROCEDURE trigger raised unhandled exception ORA-00001.
I want a message like :
ORA-20002 This identifier already existsHello,
ORA-20500: ^This identifier already exists^ ORA-06512: à "SCOTT2.EMP_PKG", ligne 48
I cannot figure out what is the problem described by the second part of the message.
why numeric or value error in this case ? ( ligne 48 corresponds to the raise_applicaion_error instruction )There is no problem with the second part it is just for showing the line number it not the numeric or value error the code for numeric or value error is ORA-06502. See the below link for more information
http://www.techonthenet.com/oracle/errors/ora06512.php
So, now you can display your customized message in status bar using the error code which you defined in RAISE_APPLICATION_ERROR like below...
DECLARE
errcode VARCHAR2(50) := DBMS_ERROR_CODE;
errtxt VARCHAR2(1000) := DBMS_ERROR_TEXT;
BEGIN
IF vErrCode='-20500' THEN
MESSAGE('Here display your customized message.');
ELSE
-- Handle the rest errors...
END IF;
END; -Ammad -
Error 00-341 RAISE_EXCEPTION when using Call Transaction for VA01 in backgr
Hi,
I am getting this message when I use call transaction to create a sales order using VA01. Following is the statement I have used. Note that when i execute the program online, I am not getting any errors. I could create sales order without any problem. I am getting this exception only when I run in background.
CALL TRANSACTION 'VA01'
USING BDC_TAB
MODE 'N'
UPDATE 'S'
MESSAGES INTO W_MESS_TAB.
When I captured message tab, I got following messages.
DC006 - Control Framework: Fatal error - GUI cannot be reached
00341 Runtime error RAISE_EXCEPTION has occurred.
Please help me in this regard.
Regards
KasiSome times execution of BDC program in back ground is different from the foreground. Some screens may appear in background and raise error while same will not when executed in foreground.
Double click the message in Session log to know more details.
One way is to suppress the screen while executing BDC.
Alternatively I suggest to use BAPI instead.
- Sanjay -
Message in Status Bar while using ALV Objects
Hi All,
If we use ALV in objects (Build in class and methods for ALV),is it possible to display a error message using Message statement in Status bar.
Thanks in advance.Hi,
Yes, it is possible. You can do it using the ALV Object Model (ALV OO methods) within an event handler method. For example, the event "added_function of cl_salv_events" can be used and you can add code similar to the following code within the event handler method:
CASE e_salv_function.
WHEN 'XYZ'.
MESSAGE w001(00) WITH 'Message text goes here...'.
ENDCASE.
The warning message will either show up as a popup or in the status bar depending on your user settings. Of course, you can also use other message types (e.g. I, E, S) or other message techniques besides the message statement.
Best Regards,
Jamie -
SAP GUI 7.20 and Animated Messages in Status Bar
Hello Experts,
Is there a way to disable "animated" display of messages in status bar when Signature Design is active? Currently messages are scrolled from left to right and then fade in. (Please note that this is a different from "Animated Focus" or "Animation" feature and only unique to Signature Design Theme). It would be nice to disable the animation so messages are immediately displayed without disabling Signature Design. I have asked this question in the past and there was basically no way to accomplish this. Is there any hope that this would be included in future patches for SAP GUI 7.20?
Thank you!
AbdulDaniel,
Have you had any luck with this issue? We recently installed SAP GUI 7.20 patch 2 and are having similar issues. While working in t-code SWDD, "Workflow Builder", I am automatically logged out of SAP and the LOGON pad also closes out and I forced to sign back in. This is happening when I drag and drop an event into a step and enter in information that should normally prompt a warning/error message after hitting the "Enter" key.
Thanks in advance.
Edited by: Michael Kostek on Oct 7, 2010 9:11 AM -
Tracing of message in Status Bar using Call Transaction for MRBR
Hi
As per the business requirement, I would like to automate the MRBR Transaction. I am achieving this by using Call Transaction. After aaplying certain company codes as an i/p; i receive the invoices as an o/p in a ALV Lay out. Say for example, 100 invoices are displayed in a AlV Lay-out after applying i/p. Now I select all these 100 invoices and release them.
All these steps are recorded and supplied to Call Transaction via BDC table.
Problem:
The number of invoices released, appear in the status bar of that ALV Lay-out screen. This message appears on the ALV screen after I have released the invoices and clicked on "SAVE" button.I would like to use this information and display this number (No. of Invoices released) in my Job Log. But I do not know how to do it. Could any one help me out for this?
Thanks in advance,
Jigar Shah.Yes I have tried that option as well.
But the thing is, the recording gets over as soon as I click on "SAVE" button.And that message apperas in status bar only after I click on "SAVE" button.So this way the message in the status bar never gets recorded.
Thanks & Regards,
Jigar Shah. -
How to pass message in Status Bar
How can I pass message in status bar.
I typed bellow line but get some error.
void itemFileOpen_actionPerformed (ActionEvent e) {
statusBar.setText(" need Help ");
Error: (456) method setText(java.lang.String) not found in class oracle.dacf.control.swing.StatusBarControl.
Warning: Deprecated APIs are used. Please recompile with the 'deprecation' option for details.
nullSergio,
Even though your form is based on the Apps Template form, double-check to ensure it has all of the triggers it should have, like the Form level Key-Commit. The easiest way to make this comparison would be to open your custom form and then open one of the EBS forms like "ARXCUDCI". If your comparison shows no significant differences you might be dealing with a situation when the message is displaying in the Console (status bar) but something else is clearing the console. Check for any Clear_Message calls.
Hope this helps.
Craig...
If my response or the response of another was helpful, please mark it accordingly -
Hi friends,
Thanks in advance.
Can we hide or suppress the messages displayed on the status bar .Hi,
For BDC
R u using call transaction for ur BDC? If u r then u can catch all your messages and put them into an internal table of type bdcmsgcoll. Use the addition ... MESSAGES INTO itab with your CALL TRANSACTION statement.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
ALV Report - Field Overflow message in status Bar
Hi
I am trying to display ALV report , ALV report is displaying fine but on execution of report , an message in status bar is coming as "Field copy Number can not be totalled because of field overflow."
Can anyone tell why such messgae is comming?
Thanks,
DebadattaJust a wild guess, treat the below as an example.
Eg:
assuming one field in the output is of length 2 type i.
values: 20, 30, 60, 45.
Totalling the values result as 155. but due to the length of the field as 2. We can encounter the overflow message.
Considering the above example, manually total the values of your numerical columns and see if any of the column is execeeding the specified length.
Regards
Eswar
Note: Reward if you find the info useful. -
FM to display warning message at status bar
Hi,
can any body give me the FM to display the warning message
at status bar.
Thanks in advanceHi,
To give a warning message , you dont need any function module. You can use the keyword 'MESSAGE' and give the type as 'W'.
Do a F1 on the keyword MESSAGE for further details.
regards,
Advait -
Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc.. Please Help!
Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.'' -
Regarding message in status bar
Hai SDN members , i have to display message in status bar , my requirement is like this ,ihave three fields in gui screen 1 is shipment num ,2 is shipment type and 3 is packing ref . and if i give the input in this three fields ,then the shipment number should be displayed in status bar
hi,
u want message after pressing some button or enter?
u need to write this in USER_AOMMAND module of PAI, in when case..
like
when 'SAVE'.
MESSAGE s000(zmsg_fmtr) WITH srn.
here zmsg_fmtr is my message class
and this is my 000 message in that mssage class
Record Saved Successfully with Serial Number &
in place of & my passing parameter (srn) will come on status
reward if usefull... -
No Status Bar when Bouncing Audio
I used to see a status bar when I bounced audio to MP3 or Wave, etc. Now I don't. Anyone know why this may have disapeared?
Thanks,
SteveIt's a bug in Logic 8 - it sometimes occurs on my system and sometimes it doesn't...
-
Hi ,
i am getting an error message in pop-up box ,can we show this same error message in status bar..?
Thanks.Hi shiva ,
data : dtype type c value 'S'.
MESSAGE E053(z4) DISPLAY LIKE dtype.
my code is like that,but still it shows in popup window.
can you check it once...?
Thanks -
When we use call transaction and session method?
cud anyone tell me the exact difference between session and call transaction ? when we have to use ?
hi,
BATCH INPUT METHOD
Asynchronous processing
Transfer data for multiple transactions.
Synchronous database update.
A batch input process log is generated for each session.
Session cannot be generated in parallel.
CALL TRANSACTION METHOD:
Using CALL TRANSACTION USING statement
Faster processing of data
Synchronous processing
Transfer data for a single transaction.
No batch input processing log is generated.
Maybe you are looking for
-
Can I open file in shared mode so that multiple users can write at same tim
Hi, I want to write to a trace file from a user exit and BADI. But I want to create only one trace file in which multiple users can simultaneously append. Is it possible to do this? How? Code could really help as this is urgent. Thanks for reading.
-
How To Create Logical column For Lastyear To Till Date
Hi All, I Have to calculate Lastyear to Till Date for Logical Column. Ex:I have Time Dime and Fact column and Dimension columns. jan 2011 to oct 2012. Please Let me know. Thanks, Abhi
-
Query with trim function running more than 15 hours..
Hi, I have one select query which is running more than 15 hours.I have many trim() functions in that.and i have index for some columns for the tables that i used in that query.but it is not considering those indexes.. select DISTINCT trim(A.x) x, tri
-
CRM 5.0 and telephony integration
Hi gurus, We have CRM 5.0 integrated with Siemens HiPath ProCentre and we've come across a couple of issues with it, which our users are not able to pinpoint the first occurence of for us to trace back. 1. When ending an outbound call the call timer
-
I lost my smiley face icons etc in my text messaging after I upgraded to ios7 on my iPhone 5
I lost my smiley face icons etc in my text messaging after I upgraded to ios7 on my iPhone 5