Supressing/ hiding columns in Crosstab

Hi, I have a crosstab report and it contains columns as:
Qty Increase | Qty Decrease | Net Qty | Cost Increase | Cost Decrease | Net Cost.
I want to display only Net Qty and Net Cost
And hide/suppress all other columns.
Anyone please let me know is there any option to do this.
Thanks in Advance
Sree Raj

Hi, Thank you and it worked. But only for 1st column. If I do for 2nd col, 1st column values are displaying again. And I need to apply this formula separately for column heading. I have written formula as:
not(GridRowColumnValue("Table.Cost")="Net Cost")
where Cost is column and Net Cost is a Calculated member. (Cost Inc - Cost Dec.)
Again I have to write this formula for suppressing another column and its values.
Is there a way to suppress all these columns & its values in a single shot except Calculated members.
Thanks
Sree Raj

Similar Messages

Event getting trigger after hiding columns in alv report

Hi All,
I having requirement like after hiding columns,i have to control some of the hard coded data in report output. Is there any event to know what all are the columns are selected to hide?

You can use FM REUSE_ALV_LIST_LAYOUT_INFO_GET to read the fieldcat again.
Look at the parameter it_event_exit on the ALV FM to now user has press on some of the Layout buttons.
In the fieldcatalog, look for
- no_out = 'X'. " column is not displayed but can be choosen when changing the layout
-tech = 'X'.
" column is neither displayed nor availabe in the layout

Hiding Columns in a JTable

Hi folks,
I'm developing a program, one part of which should show in a table the information it got from the DB. It works just fine. The problem is - the user doesn't need to see all the columns (some of them are even unknown and are for intern use only). How could I hide those columns? Or should I create another TableModel and show it instead?
Thanks in advance

As a new member you should learn how to search the forum before asking a question.
A simple search would use "hiding column jtable" as the keywords as an example.

EVDRE reporting not stable: "hiding columns" & applying datarange formula"

Hi,
we use BPC 5.1. (SP6) With several EVDRE reports we experience that our excell session sometimes stops working, typically when changing the CV and expanding again. At the bottom of the excell we see the statements:
"hiding columns" or also "applying datarange formulas".
I wait for more than 10 minutes, but nothing changes and I can't do anything anymore and have to abort excell with CTRL + ALT + DEL ...
Does anyone experience the same problems? (We work with Office 2007)
regards
Dries

Hi,
I cannot test with Office 2003 since I don't have it installed ..., I typically have it with EVDRE reports, not with schedules created from a template. Numbers of members to be expanded, maximum 10, for which 10 accounts are displayed (so max 100 lines) ... We do not have many data in our system yet, lets say 20.000 records max.
D

How to fix loop value of column in crosstab BI publisher report ?

Hi all,
I have a RTF template of crosstab report.I facing the problem: Some value of each column is loop for each row.
EX: I have data: row1,co1(1000), col2(0),row2,col1(2000),col2(500).Then value of col1 loop from row1 and row2. Please help me!It's urgent.
Incorrect result:
desc col1 col2
no am am
row1 1000 0
row2 1000 500
Correct result:
desc col1 col2
no am am
row1 1000 0
row2 2000 500

Can you share the data and the version you are using ?
Tim

Hiding columns in a table?

Hi there,
I wonder if any of you know of an easy way to hide columns in a table in InDesign CS5? To further explain, i have two documents currently, one is a price guide and the other is bascially identical but without the prices, lets call that the product guide. It seems daft to have to update the two (especialy when i actually have four as i have each in two languages!) every time there is a slight change to the product listing. So, i was thinking if i have the price guide, make a PDF of that, hide the column with the prices in, and then hey presto, I've got the product guide. Seems simple but i can't seem ot find a simple way of hiding the column.
Is there such an option? Or any suggestions as to how best do it? I don't want to delete it as i will need to update this column occasionally, and i really want to avoid having lots of different InDesign documents as i have this situation for 5 different country's guides, each with a local language and english language version, making 20 in total if i keep them separate (10 if i don't, which is enough imho) - mental i know! But thats the way work want it
Cheers!
(On Mac OSX 10.6.4 and running InDesign CS5)

linziloop wrote:
Hi there,
I wonder if any of you know of an easy way to hide columns in a table in InDesign CS5? To further explain, i have two documents currently, one is a price guide and the other is bascially identical but without the prices, lets call that the product guide. It seems daft to have to update the two (especialy when i actually have four as i have each in two languages!) every time there is a slight change to the product listing. So, i was thinking if i have the price guide, make a PDF of that, hide the column with the prices in, and then hey presto, I've got the product guide. Seems simple but i can't seem ot find a simple way of hiding the column.
Is there such an option? Or any suggestions as to how best do it? I don't want to delete it as i will need to update this column occasionally, and i really want to avoid having lots of different InDesign documents as i have this situation for 5 different country's guides, each with a local language and english language version, making 20 in total if i keep them separate (10 if i don't, which is enough imho) - mental i know! But thats the way work want it
Cheers!
(On Mac OSX 10.6.4 and running InDesign CS5)
* If you experiment with some table cell settings, you can probably find a design that works when the columns are exposed, and when they're set to their minimum width - 3pt.
Setting the column width to its minimum may not conceal cell content if the cell side margins are so small as to allow content to touch the cell sides, so you may need to pay attention to the margin values. If the column has vertical rulings, you may also need to pay attention to their stroke width and color.
* Conditional text won't hide a column, but if the column is the furthest left or right, you might achieve what you want by applying a condition to the text in each cell of the column and hiding or showing it as needed. The width will be preserved, but no text will appear when hidden.
* Similar to conditionalizing the cell content, you can define a paragraph style for only the cells in the column, and redefine the character color to None or Paper to hide the content, and redefining the color to Black to show it.
* It may be possible to script a solution. I'm not familiar enough with available scripts. Inqire on the scripting forum.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Hiding column in table in smartform

HI,
Can we hide a column in a table on a specific condition?
PLease let me know.
Reagards
Sandeep

Hi,
Here 2 options are there select based on requirement.
1. Column will hide but there empty space will display. This can be acheived by setting the condition in condition tab of the column related text in that node(table).
2.Completly hiding the cloumn and also empty space means create 2 tables table1 with 4 columns and table2 with3 columns. create alternative and put condition. if yes table1 display.if no means table2 will display.
Thanks,
Suma.

Hiding columns in view.

Hi all,
I need to hide two columns in a view. I need to save this view and use it in a web template. I can do this if the column is a key figure but not when its a selection in a structure. What are my options? I tried deleting and hiding the columns and then saving it as a view but when I execute the template, the columns come back. Please let me know what I can do.
Thanks!

Hi Uday,
See if you can do this using the filter option: Right click on the Structure in the view and choose filter. Then move the selections that you want to the right, and other to the left.
Hope this helps...

Hiding column in BPM workflow inbox

There is a requirement to hide few columns. Using IBPMUICustomizations, I can show required columns. But as this list is bigger and can increase in future.
Wanted to hide displaying few columns that are not required.
Wanted to know is there a way of hiding few columns by name?
Thanks in advance,
Bhaskar

any help?

Hiding columns in Presentation Layer, but still accessible in a report.

Hi BI Devs,
I have a question on how to hide certain columns in the presenation layer but still make them available in a dashboard/report.
We have 3 sections in our Presenatation Layer...section_a, section_b, section_c. We have two groups created, group_max and group_lite. Group_max will have access to all the sections in the presentation layer but group_lite will only have access to section_a and section_b
We have a report in a dashboard (lets call it full_dashboard) that contains columns from section_a, section_b and section_c. We want all users (group_max and group_lite) to have access to the report, run the report and return data.
Our requirement is that the group_lite will not have access to the section_c in "Answers".
When we set the permissions in the RPD for the different sections, the permissions work correctly in hiding the section_c from group_lite, but when they run the report full_dashboard, the report errors out for group_lite users.
Is there a way to grant access to the group_lite users so that they can run full_dashboard but still deny them access to the columns in Answers?

Here is my thinking about duplicationg the section_c
1. If i duplicate section_c, it will still be visible to group_lite in the presenation layer.
2. If i duplicate section_c, i will have to change the dashboard (a very complex one too) to point to the duplicated section. How will I be able to hide the duplicated section?
I am just not sure how to hide section_c from the group_lite users and still have the reports in the dashboard access the columns, without having to change the report.
Edited by: empyre on Mar 16, 2011 8:21 AM

Custom column in Crosstab query in BO 6.5

Hello Gurus,
I am trying to create a report in BO 6.5 using data from two flat files by linking them and I applied cross-tab template as I need row data as columns based on a field called STATUS (Approved, Cancelled, In process etc). And in this STATUS field I want to add another column (Not Ordered) on the run using some conditions which is not in the flatfile. How can I do that?
Please let me know if my post in unclear so that I can provide more data regarding the report.
Thanks in advance for your time.

Let me elaborate my requirement. I am trying to create a report using data from two flat files. I am supposed to give the status of orders. So I created crosstab query and I chose STATUS field data to be as columns. Currently it have three fields----Approved, In process, Waiting for approval. Now as per requirement I am supposed to include another column called Not applicable based on two fields Amount and Local/No local. Before this we used to create the same report uising excel and I used below formula:
=IF(AND(Amount=0,B2="Non-Local"),"Not Applicable","Approved")
But in BO if the above condition is False I want that particular record to fall under already existing "Approved" but it is creating another "Approved" status and it is not catagorizing Not applicable....I mean every record with amount =0 falls under new Approved status but not in Not applicable as expected. Hope you understand my issue.
Am i doing anything wrong in creating formula?

About hiding columns in a JTable.

I have read various ideas on how to hide columns in these forums,. Everything from using the removeColumn method in TableColumnModel to writing a wrapper TableModel to handle the details. These ideas work, but in certain situations it is difficult to retro-fit the code in this manner. Being that Swing has a MVC architecture, does it not make since that I should be able to alter the view ( The Table ) any way I like without altering the underlying models? Does anyone have a good solution?
I already had implemented a TableModel which does this, and a TableColumnModel. Probelm is, I have external libraries that make extensive use of the DefaultTableColumnModel in the JTable, and I would rather not have to alter it. those libraries.
Thanks.
AC

Being that Swing has a MVC
architecture, does it not make since that I should be
able to alter the view ( The Table ) any way I like
without altering the underlying models? Does anyone
have a good solution?I can see your point, but JTable presents the view it does which is customizable in certain ways only.
The hiding of columns just isn't part of what it does.
So you could extend JTable to add such functionality. Having looked at the source of JTable recently, I wouldn't want to do that.
The alternative is to wrap existing models in another model that does some transformation (i.e. hiding a column) without changing the underlying model. See the TableMap and TableSorter examples in the Swing Table Tutorial to see an example of this.

Dynamic columns in crosstab report

Hello,
I'm using CR 2008.
I've created a dynamic crosstab report. The number of columns could be any, depending on the data.
I need to replace the original column headers with the formula, so the headers would look like this:
Set1 Set2 Set3... etc., where 1, 2, 3... etc. are the column indexes (or just sequential numbers).
Could you please recommend me a formula for it? I'm not sure how to insert these sequential numbers to the column headers.
Thank you.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Blank columns in crosstab data

Hello!
I have a crosstab report that I use that shows revenue forecast by month. The months are across the top of the crosstab. My problem is that if there is no revenue forecast for a particular month, the column does not show up. So I may have columns for Jan, Feb and March and then the next column is May (skipping April). How can I make sure all columns show up even if there is no revenue?
Thank you!
Megan

Hi,
You will have to outer join a folder or table into your report that defines all the months that you wish to include in the report. Otherwise the report will not know about the missing months. For example, define a folder that always returns the previous 6 months, then outer join this folder to the folder used in your report using the month as the join column. Then take the month column used in your report from the new folder.
Hope that is clear.
Rod West

Hiding columns

I am trying to print, hiding selected columns. Some columns hide almost immediately. Other seem to hang. I am not using any functions in any cells. It is purely text. There are no more than 10 characters in a cell, approx 900 rows. Any suggestions?

Run Activity Monitor.
Doing that you will see when Nummbers is heavily busy.
This will help you to be patient
Yvan KOENIG (VALLAURIS, France) mardi 22 septembre 2009 19:12:28

Supressing/ hiding columns in Crosstab

Similar Messages

Maybe you are looking for