Supressing Inline Information Message using OAF Personalization
Hi,
Is it possible to supress an inline information message in an OAF page using personalization?
If it is possible, can you please let me know how to do it ?
Regards,
Manjusha.
Hi Gaurav,
I checked in personalization window for tip type and couldnt find any.
I think it is not a tip type.It is a information message displayed at the top of the page.
Regards,
Manjusha.
Similar Messages
-
Is it possible to launch a form from an OAF page using OAF Personalization
In R11, the Customer Standard form ARXCUDCI was customized to call a custom block from the Address screen. In R12 the customer standard form has become an OAF page. We have decided to create a custom form for the custom block using Oracle Developer. However we need a mechanism to call this custom form from the Customer Standard OAF page.
My query is if it is possible to call a custom form from an OAF page using OAF personalization only (i.e. without directly customizing the code of the OAF page)
Thanks
SanjayDear Apurba,
I have made some progress.
I have open the Customers OAF Page, queried a customer, selected a site and opened it.
Then chose Personalize "Account Site Address"
There I added a Button on the Header Address level
ID=XXTVL_LASSY_BUTTON
Populated the Additional Text and Prompt properties.
Also set Destination URI=form:SYSADMIN:SYSTEM_ADMINISTRATOR:STANDARD:FND_FNDMNMNU.
The button is now showing in the address page, and when I click on it it opens the seeded Menu form.
I now have to create the custom form and set Destination URI to the Custom Form.
I am also aware how to add parameters to Destination URI.
But could you let me know how to read the value from a OAF page form field and reference it in Destination URI.
I need the value of PARTY_SITE_ID of the Address OAF page.
Alternatively, the Site Number is displayed on the OAF page. If I can read it that will also do. I can use the Site Number in the custom form rather than PARTY_SITE_ID
Thanks
Sanjay -
How to disable link on R12 suppliers page using OAF personalization
Dear All,
My client asking to hide/disable banking details link on R12 suppliers page ,
Please let me know if there is any solution using OAF personalization.
in personalization link i am not able see any link items ,where as in about this page its showing all the link attached to page .
Thanks & Regards
RajuHi Raju,
Plz go to the region containing the links. You should find the links. Try change render property accordingly.
Regards
Sanujeet -
Supressing the information message in ALE
Hi All,
I created a report which will call this bd10 based on the selection screen parameters. it is executing correctly, but this tcode should be given to end users.
generally after execution of BD10 , it will give the information message 1 master idoc is setup and after entering this it will show another information message like 1 communication idoc is setup for this. I dont need to display these two messages. <b>how to supress this information message.</b>
Is it possible?
Regards,
vinoth.Hi,
This can be possible,but its beyond a developers rights,this information message will be displayed always.
if you want to avoid it run in background.
regards,
pankaj singh -
Hiding a filed based on responsibility using oaf personalization
Hi Experts,
I am learning OAF, I have following requirement.
I have 'SAL' filed in my page; I want to hide that filed if i access that from responsibility A and should be shown if i access it from responsibility B.
Could somebody help me how to achieve this using OAF Personalization?
Note:I heard that in 'Functional Administrator' responsibility, you can do something.
Kindly help.
Thanks.Hi,
You have to follwo below steps.
-> Set profile option Personalize%Self%Serv%Def% to Yes at user level(user you are using to personalize).
-> Navigate to the page you want to personalize
-> Click on Personalize Page in global menu on the top of the page.
-> Click the Choose Context button and select the responsibility for which you want to personalize the item(clear all other fields like site, organization, location,function,industry)
-> Click Apply button. You will get the page hierarichy.
-> Now identity the item you need to personalize and click on personalize icon(pencil icon).
-> Set Rendered property to false/true (if you want to hide the item set false to show set true) and apply.
-> Return to Application
Repeat same steps for other responsibility.
Regards,
Ram -
How to hide taxid column using oaf personalization
Hi, I need to hide tax id coulumn in supplier page in R12 for all applications except 2-3 responsibilities, can I set rendered to false on organization level and only set rendered to true for those 2-3 responsibilities at responsibility level? Do I need to sign in separately in these 2-3 responsibillities and turn rendered to true separately? Is there a good and better way to do it?
thanks for anyone can answerFirst find the full path of the page you want to personalize (ie /oracle/apps/.../) then using functional admin, go to the "Personalization" tab.
1) application catalog subtab, enter your path in the field "document path". Click GO to conduct the search
2) Click on the personalize page icon (pencil)
3) Under choose personalization context page, there is a field called responsibility. From here set the value to the desired responsibility. Here you can also set the org value.
4) Select apply. The page will look as though you had selected the "Personalize page" link from the page itself. Any personalizations you perform will then be within the contexts you have defined under step 3
Regards,
LC -
Hi,
Suppose we select the Global Data Elements feature of DFF on a standard Oracle OAF page.
I want to have this Additional Information enabled for particular Organization and disabled or read only for other Organizations.
Is there a soluion for this using OAF personalization as these DFF text inputs are not visible on OAF Personalization page.
Any help is welcomed
ThanksYou should be able to set the segment list to meet your requirement.
From the developers guide ...
If you leave the Segment List property empty, all segments render. The value you specify for this property must use the following format:
Global Data Elements|[global segment1]|[global segment2]||...||Context1|[segment1 for context1]|[segment2 for context1]||...||Context2|....
For our example shown in Figure 1, Packaging Type is the context field and Warehouse is the global field for the descriptive flexfield. To always display the Warehouse global field and display the context-sensitive fields Items per Box and Box Size for the Box context and Items per Pallet and Pallet Weight for the Pallet context, you would specify the following value for the Segment List property:
Global Data Elements|Warehouse||Box|Items per Box|Box Size||Pallet|Items per Pallet|Pallet Weight
As shown, segments within a certain context are separated by a single pipe, "|", while data from a different context is separated by a double pipe, "||".
Read-Only Segments
You can also add the read-only token ($RO$) after any of the segments in the list. For example, the ($RO$) designator below sets Segment1 to be read-only:
Context1|Segment1($RO$)|Segment2...
Mark -
Suddenly all information messages appear as popups
Hello,
Information messages used to appear on the bottom of the screen. Now they all appear as popups as well. It's very annoying.
Other's have noticed this as well. Is there a system wide setting that is causing this?
Thanks,
MattHi Matt,
i think you are using sap gui 710.
go to sap tweak gui , in that there is option for visulization & interaction
In that there is one option for
Show error messages in a dialog box.
just remove this tick.
or login in sap press (ALT + f12) OR Click on customizing local layout,
go to option ,
there is a block for messages.
just remove click if there.
i hope this solved ur query.
Regards,
Arpit -
We are on PI 7.31 (SP9) dual stack and when I look at logviewer, I see the following information messages at regular intervals
SAPTimeZone Log Info: Action: CreateSAPTimeZone. Reason: Timezone xxxx not found
SAPTimeZone Log Info: Action: getTimeZoneABAPOrJava. Reason: Timezone xxxx
SAPTimeZone Log Info: Action: getTimeZoneABAPOrJava. Reason: Timezone xxxx mapped to CST
There are hundreds of such messages every few minutes.. I know that the following note 1604058 made this an information message.
1) I am trying to figure out if we need to take any action on such information messages? Does this message mean that timezones are not being maintained?
2) If this information message has no functional meaning, how do I ensure that it does not fill my logviewer? I noticed that Log configurator is set to 'Error' for Tracing Location com.sap.i18n.SAPTimeZoneInfo.Rafikul,
so we are getting this information because one of the timezone is wrong?
This was the result of report TZCUSTDISP
Display System Parameters for Time Zones
current date: 13.03.2014
current time: 17:35:42
timezone: CET
Time Zone Information of System
sy-tzone : 3.600
sy-dayst :
sy-zonlo : CET
sy-datlo : 13.03.2014
sy-timlo : 17:35:49
sy-datum : 13.03.2014
sy-uzeit : 17:35:49
Setting in Operation System
Diff. from UTC 3.600-
Time Zone Text CEST
R/3 Time Diagnostic Program on SERVER
Universal Time Coordinated UTC....: 1394728549
Date and time of database.........: 13.03.2014 17:35:49
Date and Time of R/3-Kernel.......: 13.03.2014 17:35:49
Date and Time of ABAP-Processor...: 13.03.2014 17:35:49
ABAP Timezone Setup ..............: 3.600
Date and Time / localtime ........: 13.03.2014 17:35:49
No Time Inconsistencies detected !
Checking GET RUN TIME from 17:35:50 to 17:35:55 during 00:00:05
GET RUN TIME result ..............: 5.000.004 us
GET RUN TIME time measurement accuracy ok !
or if nothing is wrong, is it okay to supress this information message? AND how can this information message be supressed (if at all it can be supressed). -
OAF Personalization and Validation Issue
hi Gurus and Experts
Lets say I have my lines contain following attributes, and I have following users (User-Cre, User-LA)
User-Cre > LinesId
User-Cre > LinesNumber
User-Cre > ItemCategory
User-Cre > ItemId
User-Cre > RequestedQty
User-LA > SanctionedQty
User-LA > LPQty
User-LA > AuthorityLetterNumber
User-LA > Remarks
I have mentioned the fields filled by respective user. I want fields to be shown to relevant users only, for example last 4 fields should not be shown to "User-Cre" and first five fields should not be shown to "User-LA". I guess I can achieve it through OAF personalization using SPEL. Problem is I have some validation on both sets of attributes. I want to know that if validations will be fired on User-LA related attributes when these fields will not be rendered using OAF Personalization ? Kindly explain it deeply so that my understanding become clear. If there exist any coding then please write it here and please give some more smart techniques to do so. Many many thanks in advance
RegardsHi,
I have mentioned the fields filled by respective user. I want fields to be shown to relevant users only, for example last 4 fields should not be shown to "User-Cre" and first five fields should not be shown to "User-LA". I guess I can achieve it through OAF personalization using SPEL. Problem is I have some validation on both sets of attributes. I want to know that if validations will be fired on User-LA related attributes when these fields will not be rendered using OAF Personalization ? Kindly explain it deeply so that my understanding become clear. If there exist any coding then please write it here and please give some more smart techniques to do so. Many many thanks in advances
You can achieve this requirement by using SPELL for the following columns. You can set those columns rendered = false //by SPELL
Even though you will set it rendered false, all the validation will get fired related to those field. Try to find out whether there is any validation for the given columns. If there is some sort of validations done then you need to go for overriding Validation methods.
Regards,
Gyan -
Supress Message using Personlization in Oracle Forms
All,
Is there a way to supress the message using Personlization in Oracle Forms 11i.
Thanks,Hi;
Please check below thread which could be helpful
Forms Personalization Document
Re: Forms Personalization Document
Re: Form Personalization
Regard
Helios -
when I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome this.
Delete abd re-enter your Facebook account information jnder the accounts tab in the iPhoto preferences
You may also want to take a look at the user tip for Facebook problems
LN -
I get the error "missing or invalid personalization information" This used to run, I'm now on Windows 7 64 bit. Anyone have any ideas please? Thanks.
Hi,
If my memory serves me right (it’s some while since I changed and I have not used Photoshop for some years…) I was running it on XP. I upgraded to Win 7 on a new machine but ported across files, programmes etc. I cannot recall if Photoshop ever ran on Win 7.
I have tried to reinstall but the CD is warped and despite applying pressure to it neither of my drives likes it. I have Photoshop 7 on my third hard drive, a portable drive, which came from the XP machine.
Sorry, long-winded but I hope it helps. -
Hi Experts
We are working on one requirement in which on a standard D2K EBS form based on the response of a warning message we need to perform certain actions using Form Personalization.
The problem is that we are not able to capture response of OK and Cancel buttons of the warning.
If any one has come across such scenario, I would request to please share your valuable suggestions. 2898414
Thank You
Regards
Mirza TanzeelFigured out myself that this is mot possible using Form Personalization.
Only option possible is to try implementing by modifying custom.pll
Thanks
Mirza Tanzeel -
Catching Information message in Program called using SUBMIT
Hello All,
I am calling a report program using below
SUBMIT program EXPORTING LIST TO MEMORY
AND RETURN.
the program called is having one inforamtion message and is coming out after this message appears on screen. I want to capute this information message and need to display in my main program.
Please let me know how capture this type of messages in SUBMIT.
Thanks in advance.
Regards,
Ganesh.Hi ,
DATA: text TYPE c LENGTH 10,
lt_selscreen TYPE TABLE OF rsparams WITH HEADER LINE .
lt_selscreen-sign = 'I'.
lt_selscreen-option = 'EQ'.
lt_selscreen-low = '7100'.
append lt_selscreen.
FIELD-SYMBOLS <lt_pay_data> TYPE ANY TABLE.
DATA lr_pay_data TYPE REF TO data.
cl_salv_bs_runtime_info=>set( EXPORTING display = abap_false
metadata = abap_false
data = abap_true ).
Submit Wage Type Reporter
SUBMIT ZMR113_NON_MOVING_AGING WITH SELECTION-TABLE lt_selscreen with so_werks ='7100' AND RETURN.
TRY.
cl_salv_bs_runtime_info=>get_data_ref( IMPORTING r_data = lr_pay_data ).
ASSIGN lr_pay_data->* TO <lt_pay_data>.
CATCH cx_salv_bs_sc_runtime_info.
MESSAGE `Unable to retrieve ALV data` TYPE 'E'.
ENDTRY.
cl_salv_bs_runtime_info=>clear_all( ).
THis Code i used in my report it was Created by Glen Simpson Expert Blogger : it was nice piece of code to Gain Access from Other ALV Report of SAPGUI
regards
Deepak.
Edited by: Deepak Dhamat on Oct 5, 2011 8:18 AM
Edited by: Deepak Dhamat on Oct 5, 2011 8:21 AM
Maybe you are looking for
-
Can we please hear from Management on the HTC EVO 4G LTE Status
I am starting this post as a hope to actually get some sort of status update on the HTC EVO 4G LTE release. I think I speak for the techno philes out there that are waiting for and pre ordered the device. Back on the 17th we were disappointed with
-
Graphical glitch when using textinput on iPad
I've got a strange problem when using textinput on the iPad. When you select a textinput the iOS keyboard will be shown so you can enter text, so far so good, but if the textinput component is located in the area where the keyboard is the screen shou
-
How to change the payment Block?
Dear all, How to change the payment Block? Please help. Regards Mahfuz
-
I am having trouble opening itunes in windows 7 with shield on shortcut
what ca I do? I have uninstalled it and reloaded t several time and it still wo'nt boot?
-
Dear SDNs, My client wants to extract the data from invoice text types like he wants to find out the text data in each text fields which are maintain in the invoice item level. please advice my above scenario.I dont know where it could be stored and