Supressing the selection Screen

Has anyone been successful in suppressing the selection screen that is automatically displayed when using logical database.
I want to run a job in the background using a logical database and I do not want the user prompted for the parameters. I want to pass the parameters in the program....
How to create that?

You can populate the selection screen values in the internal table and call the transation using that internal table.
CALL TRANSACTION tcod [AND SKIP FIRST SCREEN] [USING itab].
Hope it may help you.
Mullai

Similar Messages

  • Compare the input filename in the selection screen

    In the selection screen input field
    there is an option of selecting the directory and file name and not the extension .
    This is used to download the datas
    Extension can be selected by using the option button
    rtf
    csv.
    the user has to give only  the filename and not the extension.
    suppose if the user input is C:\temp\file1.rtf.
    Either i should take only the filename
    or i should display the message give only the filename and not the extension . its already been selected!!!!
    I want to compare the input string contains  .doc
    how to do the comparison and to get the above results mentiond
    Thanks in advance

    Because the requirment is there are two option buttion for selecting the download file format
    But unknowingly if the user gives the filename along with the extension. I need to handle that error
    giving some error message or information message
    By comparing the last 4 letters of the filename.. either.doc or rtf or csv or watever
    so how to do that
    then after comparing that i should give the user a msg doc type is already selected give only the filename
    I hope u understand my req

  • Displaying Variables values with Text also in the selection screen of repor

    hai
    I have one InfoObject ZPLANT .When i try to excute the report then im getting only the Values of ZPLANT(not Text of those values) .Like below
    ZPLANT :-
    101 -
    (im getting like this)
    101 London Plant ( i want like this ,when i try to excute the report).
    Please tell me how to do .
    rizwan

    Yes kamaljeet ,
    When we press F4 , then we will gwt some values .
    I want those values with description also ..
    Pls tell me how can i get those F4 values with text in the selection screen of report .
    i ll assing the points
    rizwan

  • Restrict filter values that are shown in the selection screen

    Hi Experts
    1) Is it possible to restrict the filter values that are shown in the selection screen in BEx web? When a user are asked to enter a material number and uses the selection button in BEx web, he should only see material numbers for one specific plant. How is this done? 
    2) Is it possible to remove the selection button for å characteristic filter in the selection screen in BEx web? The selection button I am talking about is the button to the right of where you enter the filter value (two white papers on top of each other). If there is no solution for question 1 we have to go for question 2 solution.
    We are using BI 04s, SP 09.
    Kind regards
    Erik

    Hi Erik,
    It seems that you would like the user to see value for 1 single plant. If the Plant Value is fixed then you can use this value in the Query and hardcode it.> in the query go to the Plant Chrac and keep a constant value of the Plant.
    How ever if you need this value to be dynamic then use a variable for customer exit and populate this value using ABAP.
    Regards,
    Jasprit

  • How to write text  on the selection screen of a  report

    Hi all,
    I need to write some user defined text on the selection screen of an ALV GRID Report.
    Please suggest me how can i do this
    Thanks
    Ajay.

    SELECTION-SCREEN BEGIN OF LINE .
    SELECTION-SCREEN COMMENT 12(31) text-024.<-----Goto text elements and add text.
    PARAMETERS:P_FILEN LIKE RLGRAP-FILENAME .
    SELECTION-SCREEN END OF LINE

  • How to create the selection screen dynamically

    Hi,
    I have a requirement to create the selection screen Dynamically. All the fields that should appear on the selection screen will be available in a custom table. So, based on the entries available in the Z tables, the selection screen should be built. Eg. If there are 10 records available in the Z table, the selection screen should consist of 10 fields. If there are 100 entries, the Selection screen should contain 100 fields. and the logic to build this selection screen should be carried out dynamically in the program.
    Could anyone of you please share the valuable inputs on this. If anyone has the sample code to do this, please share.
    Thanks in advance.
    Regards,
    Paddu.

    Hi,
    Kindly go through this sample program below:
    DEMO_LIST_FORMAT_INPUT *and
    check this function module:
    FREE_SELECTIONS_DIALOG *.
    Hope it helps
    Regards
    Mansi

  • How i can show the selection screen input field in the top of page in alv

    hi ,
              how i can show the selection screen input field in the top of page in alv  grid output.
    tell me the process

    Hi,
    excample from my program:
    FORM topof_page.
      DATA: l_it_header   TYPE TABLE OF slis_listheader WITH HEADER LINE,
            l_info        LIKE l_it_header-info.
      DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
      DATA: l_key LIKE l_it_textpool-key.
      READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
      DEFINE m_selinfo.
        if not &1 is initial.
          clear l_it_header.
          l_it_header-typ   = 'S'.
          l_key = '&1'.
          translate l_key to upper case.
          read table l_it_textpool with key key = l_key.
          if sy-subrc = 0.
            shift l_it_textpool-entry left deleting leading space.
            l_it_header-key = l_it_textpool-entry  .
          endif.
          loop at &1.
            case &1-option.
              when 'EQ'
                or 'BT'
                or 'CP'.
                write &1-low to l_it_header-info.
              when others.
                write &1-low to l_it_header-info.
                concatenate &1-option
                            l_it_header-info
                       into l_it_header-info
                       separated by space.
            endcase.
            if not &1-high is initial.
              write &1-high to l_info left-justified.
              concatenate l_it_header-info
                          l_info
                     into l_it_header-info
                     separated by space.
            endif.
            if &1-sign = 'E'.
              concatenate ']'
                          l_it_header-info
                     into l_it_header-info.
            endif.
            append l_it_header.
            clear: l_it_header-key,
                   l_it_header-info.
          endloop.
        endif.
      END-OF-DEFINITION.
      m_selinfo: s_trmdat,
                 s_trmext,
                 s_trmint,
                 s_fkdat,
                 s_delno,
                 s_vbeln,
                 s_deact,
                 s_kdmat.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
           EXPORTING
                it_list_commentary = l_it_header[].
    ENDFORM.
    I hope, this will help you.
    Regards
    Nicole

  • How to display the sort value in the selection screen in the report title

    Dear All,
    How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
    Good day,
    Thanks and regards
    Arun S

    Hi Arun,
    Try this.
    1, Set one dynamic parameter,
    2, Drag and drop that parameter into  your report title.
    3, Pass the value(sort value) dynamically from your application,
    4, Cheers..
    Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then  set the data source from CR designer. and darg and drop that data column into the report.
    Hope this will work,
    Regards,
    Salah
    Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

  • Problem with checkbox in the selection screen

    Hi guys,
    I have a problem with the check box in the selection screen.When i select a check box then a field in the selection screen should be enabled for entering a value.Again if i unselect the checkbox then the field should be disabled for entering a value.I have written the code in at selection-screen output.
    The problem is when i select the check box ,the field is not enabled.But when i press enter after selecting the checkbox then the field is enabled for input.It is the same when i unselect the checkbox,after i press enter only the field is getting disabled.What could be the problem.Any suggestions please?
    Thanks.

    Hi d p
                 Please try this code . I think this code have some way that you would like.
    REPORT  zdownload_to_application_server.
    TABLES : caufvd, jest.
    I N C L U D E  P R O G R A M                                        *
    *INCLUDE znrpstnd.
    Selection Screen                                                    *
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
    PARAMETERS: p_outb RADIOBUTTON GROUP g1 USER-COMMAND outb DEFAULT 'X' ,
                p_inb RADIOBUTTON GROUP g1.
    SELECTION-SCREEN END OF BLOCK b3.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
    PARAMETERS : p_werks LIKE caufvd-werks MODIF ID a.        " Plant   "OBLIGATORY
    SELECT-OPTIONS  :  s_auart FOR caufvd-auart MODIF ID a,       " Order Type
                       s_aufnr FOR caufvd-aufnr MODIF ID a.       " Order number
    PARAMETERS: p_path TYPE string DEFAULT 'C:\SchedulerInterface-OutboundTextFile\' MODIF ID a,
                p_actual AS CHECKBOX MODIF ID a.                  " Transfer Actual
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
    PARAMETERS : p_werks2 LIKE caufvd-werks MODIF ID b,   " Plant   "OBLIGATORY
                 p_path2 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
                 p_path3 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
                 p_sessio TYPE apqi-groupid MODIF ID b.   " BDC Session
    SELECTION-SCREEN END OF BLOCK b2.
    AT SELECTION-SCREEN OUTPUT.
      IF p_outb EQ 'X'.   " Outbound --> Hide inbound
        LOOP AT SCREEN.
          "IF screen-name = '%BT02011_BLOCK_1000'.
          IF screen-group2 = 'BLK'.
            screen-active = 1.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'A'.
            screen-active = 1.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'B'.
            screen-active = 0.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ELSE.
        LOOP AT SCREEN.
          "IF screen-name = '%BT01004_BLOCK_1000'.
          IF screen-group3 = 'BLK'.
            screen-active = 1.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'A'.
            screen-active = 0.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'B'.
            screen-active = 1.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path2.
      CALL FUNCTION 'WS_FILENAME_GET'
        EXPORTING
          def_path         = 'C:\SchedulerInterface-InboundTextFile\'
          mask             = ',Text Files,.txt,All files,.*.'
        IMPORTING
          filename         = p_path2
        EXCEPTIONS
          inv_winsys       = 1
          no_batch         = 2
          selection_cancel = 3
          selection_error  = 4
          OTHERS           = 5.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path3.
      CALL FUNCTION 'WS_FILENAME_GET'
        EXPORTING
          def_path         = 'C:\SchedulerInterface-InboundTextFile\'
          mask             = ',Text Files,.txt,All files,.*.'
        IMPORTING
          filename         = p_path3
        EXCEPTIONS
          inv_winsys       = 1
          no_batch         = 2
          selection_cancel = 3
          selection_error  = 4
          OTHERS           = 5.
    TOP-OF-PAGE.
    START-OF-SELECTION.
    Regards
    Wiboon

  • How to get the F4 help for a field in the selection screen

    Hi all,
    I am working on a report program. In the selection screen, I have the field 'Brand Node ID'(ZNODEID). The requirement is to have the F4 help for this field. This field is available in a 'Z' table ZNODETAB. There is no Value table maintained for the corresponding data element. So, without disturbing the table data element/domain, I should get the F4 help in the selection screen of the report. In the F4 help, data should be fetched from the table ZNODETAB and the field is ZNODEID. Is there any way to do this.
    By searching the function modules, I could find that, we can use the FM F4IF_INT_TABLE_VALUE_REQUEST. But, I am not Sure. Can someone tell me the parameters to be passed to this function module to get the F4 help and the procedure to follow. S_NODEID is the select option used in the program. Please help me in this regard. Thanks in advance.
    Thanks & Regards,
    Paddu.

    look at this code and try
    select-options : S_NODEID for ZNODETAB-ZNODEID.
    at selection-screen on value-request for s_nodeid-low
    perform f4_nodeid using 'S_NODEID-LOW'.
    at selection-screen on value-request for s_nodeid-low
    perform f4_nodeid using 'S_NODEID-HIGH'.
    end-of-selection.
    FORM f4_nodeid  USING    p_field.
      declare it_node.
    select znodeid from ZNODETAB into table it_node.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'ZNODEID'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          dynprofield     = p_field
          value           = space
          value_org       = 'S'
          display         = 'F'
        TABLES
          value_tab       = it_node
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
    endform

  • F4 Help for the selection screen field

    Hi Gurus,
    I have to display F4 help for a selection screen field. i am using following code:
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
             EXPORTING
                  retfield        = 'CODE'
                  dynpprog        = lw_repid
                  dynpnr          = sy-dynnr
                  VALUE_ORG       = 'S'
             TABLES
                  value_tab       = gi_text
                 field_tab       = li_fields_tab
                  return_tab      = pi_return_tab
             EXCEPTIONS
                  parameter_error = 1
                  no_values_found = 2
                  OTHERS          = 3.
    My internal table gi_emp has two fields CODE & TEXT. When i select 1 particular value, it returns the CODE value in the pi_return_tab table.
    But my requirement is i have to capture the corresponding TEXT value for the Returned CODE. Ex: following is the F4 help being displayed: -
    001    test
    001    test1
    but is i select code 001(First Value), i also need to capture it's corresponding Text value. In return table pi_return_tab i have only Code value.
    Please help me out.
    Note: Based on return code i can't search into the internal table gi_code, because as shown in the example, code has multiple text.

    Sachin,
    I think this is what you need. The following code will return the key and the text (OR any other columns), if both columns are in the selection screen the selected values (both columns) will also be passed to the corresponding parameters. If you only need the text to be in the return table and not passed to the selection screen then set the parameter for text with NO-DISPLAY option.
    REPORT zktest01 .
    DATA :
      BEGIN OF value_tab OCCURS 0,
        field  LIKE e070-trkorr,
        text   LIKE e07t-as4text,
      END OF value_tab.
    DATA: t_fldtab LIKE dfies OCCURS 0 WITH HEADER LINE,
          t_rettab LIKE ddshretval OCCURS 0 WITH HEADER LINE,
          t_dynmap LIKE dselc OCCURS 0 WITH HEADER LINE.
    PARAMETERS : p_field  LIKE value_tab-field,
                 p_text   LIKE value_tab-text. "NO-DISPLAY.
    INITIALIZATION.
      t_fldtab-tabname   = 'VALUE_TAB'.
      t_fldtab-fieldname = 'FIELD'.
      t_fldtab-langu     = 'E'.
      t_fldtab-position  = 1.
      t_fldtab-offset    = 0.
      t_fldtab-fieldtext = 'Key'.
      t_fldtab-reptext   = 'Key'.
      t_fldtab-leng      = 20.
      t_fldtab-intlen    = 20.
      t_fldtab-outputlen = 20.
      t_fldtab-datatype  = 'CHAR'.
      t_fldtab-inttype   = 'C'.
      t_fldtab-headlen   = 20.
      t_fldtab-keyflag   = 'X'.
      t_fldtab-lowercase = ' '.
      APPEND t_fldtab.
      t_fldtab-tabname   = 'VALUE_TAB'.
      t_fldtab-fieldname = 'TEXT'.
      t_fldtab-position  = 2.
      t_fldtab-offset    = 20.
      t_fldtab-fieldtext = 'Text'.
      t_fldtab-reptext   = 'Text'.
      t_fldtab-leng      = 60.
      t_fldtab-intlen    = 60.
      t_fldtab-outputlen = 60.
      t_fldtab-headlen   = 60.
      t_fldtab-keyflag   = ' '.
      t_fldtab-lowercase = ' '.
      APPEND t_fldtab.
      value_tab-field = '101'.
      value_tab-text = 'dddd'.
      APPEND value_tab.
      value_tab-field = '202'.
      value_tab-text = 'aaaa'.
      APPEND value_tab.
      t_dynmap-fldname = 'FIELD'.
      t_dynmap-dyfldname = 'P_FIELD'.
      APPEND t_dynmap.
      t_dynmap-fldname = 'TEXT'.
      t_dynmap-dyfldname = 'P_TEXT'.
      APPEND t_dynmap.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_field.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
           EXPORTING
                retfield        = 'FIELD'
                dynpprog        = 'ZKTEST01'
                dynpnr          = '1000'
                dynprofield     = 'P_FIELD'
                value_org       = 'S'
           TABLES
                field_tab       = t_fldtab
                value_tab       = value_tab
                return_tab      = t_rettab
                dynpfld_mapping = t_dynmap
           EXCEPTIONS
                parameter_error = 1
                no_values_found = 2
                OTHERS          = 3.
      IF sy-subrc EQ 0.
      ENDIF.
    START-OF-SELECTION.
    Jeffrey Satriadi

  • How to Display my Form in the selection screen.(without print format)

    Hi all,
    I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as  a display by giving one Z-code.
    i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
    For example.ZGPOUT if i enter as a t-code.
    it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
    Pls post ur comment and reply me with examples,if possible.
    thanks & regards
    sankar.

    Hi Prasad,
    Pls refer the below link.
    << Moderator message - Point begging removed >>
    http://wiki.sdn.sap.com/wiki/display/Snippets/Displayimagesontheselection-screen
    Thanks
    Arjun
    Edited by: Rob Burbank on Aug 17, 2011 2:24 PM

  • How to use MM/YYYY Format in the selection Screen?

    There is this program RMCB0300 where the date format in the selection screen has MM/YYYY Format.
    I am working on a report which requires it "Period" Field in the selection screen to be in the same format.
    However, i am trying to give the select option as " SL_SPMON FOR S031-SPMON MODIF ID PER." and declaring S031 table in the declaration part.
    But still, its not been able to provide me F4 help in the inpur screen.
    Can someone please provide me some guidance in this regard?

    Hi,
    the following works for me..
    *& Report  ZPMONAT                                                     *
    report  zpmonat                                 .
    tables: s031.
    selection-screen begin of block abc.
    select-options:  sl_spmon for s031-spmon.
    selection-screen end of block abc.
    at selection-screen on value-request for sl_spmon-low.
      perform monat_f4.
    at selection-screen on value-request for sl_spmon-high.
      perform monat_f4.
    start-of-selection.
    end-of-selection.
    *&      Form  monat_f4
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form monat_f4 .
      data: begin of mf_dynpfields occurs 1.
              include structure dynpread.
      data: end   of mf_dynpfields.
      data: mf_returncode   like sy-subrc,
            mf_monat        like isellist-month,
            mf_hlp_repid    like sy-repid.
      field-symbols: <mf_feld>.
    * Wert von Dynpro lesen
      get cursor field mf_dynpfields-fieldname.
      append mf_dynpfields.
      mf_hlp_repid = sy-repid.
      do 2 times.
        call function 'DYNP_VALUES_READ'
          exporting
            dyname               = mf_hlp_repid
            dynumb               = sy-dynnr
          tables
            dynpfields           = mf_dynpfields
          exceptions
            invalid_abapworkarea = 01
            invalid_dynprofield  = 02
            invalid_dynproname   = 03
            invalid_dynpronummer = 04
            invalid_request      = 05
            no_fielddescription  = 06
            undefind_error       = 07.
        if sy-subrc = 3.
    *     Aktuelles Dynpro ist Wertemengenbild
          mf_hlp_repid = 'SAPLALDB'.
        else.
          read table mf_dynpfields index 1.
    *     Unterstriche durch Blanks ersetzen
          translate mf_dynpfields-fieldvalue using '_ '.
          exit.
        endif.
      enddo.
      if sy-subrc = 0.
    *   Konvertierung ins interne Format
        call function 'CONVERSION_EXIT_PERI_INPUT'
          exporting
            input         = mf_dynpfields-fieldvalue
          importing
            output        = mf_monat
          exceptions
            error_message = 1.
        if mf_monat is initial.
    *     Monat ist initial => Vorschlagswert aus akt. Datum ableiten
          mf_monat = sy-datlo(6).
        endif.
        call function 'POPUP_TO_SELECT_MONTH'
          exporting
            actual_month               = mf_monat
          importing
            selected_month             = mf_monat
            return_code                = mf_returncode
          exceptions
            factory_calendar_not_found = 01
            holiday_calendar_not_found = 02
            month_not_found            = 03.
        if sy-subrc = 0 and mf_returncode = 0.
    *     ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
    *     <MF_FELD> = MF_MONAT.
          call function 'CONVERSION_EXIT_PERI_OUTPUT'
            exporting
              input  = mf_monat
            importing
              output = mf_dynpfields-fieldvalue.
          collect mf_dynpfields.
          call function 'DYNP_VALUES_UPDATE'
            exporting
              dyname               = mf_hlp_repid
              dynumb               = sy-dynnr
            tables
              dynpfields           = mf_dynpfields
            exceptions
              invalid_abapworkarea = 01
              invalid_dynprofield  = 02
              invalid_dynproname   = 03
              invalid_dynpronummer = 04
              invalid_request      = 05
              no_fielddescription  = 06
              undefind_error       = 07.           "<<== note 148804
        endif.
      endif.
    endform.                                                    " monat_f4
    Regards,
    Suresh Datti

  • How to disable the selection screen element?

    Hello Colleague,
    I have a report which has a checkbox in the selection screen. Currently I need to create two transaction codes for the report. When Tcode1 is executed, the program will execute in normal way. When Tcode2 is executed, the checkbox should be selected and greyed (not ready to input).
    To implement the requirement, I think I should control the screen in the INITIALIZATION event according to the SY-TCODE.  But when I tried to use LOOP AT SCREEN, I find SCREEN is empty.
    I search a lot of threads. They all introduce the selection control after screen is displayed. 
    Can any expert help me on the problem?
    Thansk & Regards, Yongbo.

    I think you can use Screen Variants T.Code SHD0.

  • Is there a way to use 'GET PERNR' without the selection screens?

    I would like to use the GET PERNR event in a batch program without using the default selection screens.  I would like to be able to use my own selection screen and parameters, but only get them along with the default selection options for payroll period.  I've tried removing the screen number from the attributes screen, but still get these options.  Is this possible?

    hi Kiran,
    report Category is a Pushbutton on the Attributes popup, it only appears if you use PNP logical DB.
    this is from SAPHelp: "Report Category
    Category used for HR reports that use the PNP logical database. It controls the type and number of fields that appear on the selection screen of an evaluation report."
    hope this helps
    ec

Maybe you are looking for