Surcharge On PO For Delivery
Is it possible to maintain a surcharge per delivery on the PO? For instance, an item is purchased and is delivered in four deliveries. There is a surcharge for each delivery. The surcharge is not based on the quantity on the order and is not a surcharge for the total order.
hi
u can maintain unpanned delivery cost in miro
or u can activate direct gl posting ,by using which u can post a perticular amount in perticular gl acct
go to spro>mm>liv>incoming invoice >activate direct post to gl acct
regards
kunal
Similar Messages
-
Proforma invoice is created for delivery without PGI in STO(Depot sales)
Dear Gurus,
I am facing a strange issue, user created Purchase order with some material X of 4 quantity, and he created the replenishment delivery for 1 quantity and without doing any Picking and PGI but system allowed to create proforma invoice with 4 quantity I checked the copy control config settings for Delivery and Proforma invoice all are maintained fine (viz., billing qty as D, copying req:311 and Data VBRK\VBRP:001)( Ichecked the change log for delivery but I didnt observed any chanes in delivery) .. strange to watch ........created the same scenario in quality but system doesnt allowed to create proforma invoice without PGI and picking(Just one month before quality is refreshed with Production).
If anyone faced the same problem let me konw the solution ate the earliest.
Best Regards,
Kishore.SGRHi
As already said, as per the standard the Performa Invoice do not check the Goods Issue status of a Delivery since it uses the Copying Requirement 009 in transaction VTFL.
If you want your performa invoice to be created only after the PGI of a delivery, then use the Requirement 003 in Copying Requirement field for the combination of your Delivery Doc. and Billing doc. in transaction VTFL at Header level.
Regards
Amitesh Anand -
Hi,
1.
I need to have a report for the paid delivey costs(planned and unplanned) for the given pos.
2.
Is there any std transaction which can give the list of fast moving items based on movement types?
Please help me, it is very urgent.
Your help is appreciated.
Regards,
Subbu.Hi,
For Delivery Cost look in Table EKBZ ,EKBZH.For Fast moving item use the T Code MCBE (also MCBA,MCBC)in which you can find the fields like number of valuated stock receipts and issue and also number of movements .Selecting a given period range if the number of movemnets is sorted in descending order the maximum moved material can be found.
Dhruba
Message was edited by:
Dhruba Charan Behera -
Sales order need to be blocked for delivery while creation
Hi experts,
My requirement is to block sales orders for delivery, for the selected distribution channels, and for selected countries while creation itself, so for this I came to known that a program MV45AFZZ include, here in this at which form can I write code to block SO for delivery. and is it enough to put a reason in the field LIFSK in VBAK table to block SO for delivery.
Thanks in advance
Regards
SriNivas........Hi,
You can use form routine USEREXIT_SAVE_DOCUMENT_PREAPRE of user exit MV45AFZZ to update the delivery block.
MOVE '10' to vbak-lifsk. "13 is the reason for block in header"
MOVE '10' to xvbak-lifsk. "13 is the reason for block in header"
Use following code to update delivery block at item level
MOVE '10' to vbep-lifsp. "13 is the reason for block in item schedule line"
MOVE '10' to xvbep-lifsp. "13 is the reason for block in item schedule line"
Regards
Vinod -
Want to know the sale order report for Delivery bclok at header level
Dear,
i would like to know some reports
1). I would like to know is ther any SAP std report is available for Sale order if Blocked for delivery(VBAK-LIFSK)??
2). is ther any report for knowing the Sale order if header/item text is maintained??
Pl advice if any std report is available.
Thanks in advanceDear Pradyumna,
Thanks for your reply, I did't find any Header r item text in the report.
Pl suggest is there any other report is availble???
Thanks in adv. -
Hi,
My requirement is -
whenever I save any sale order,by default it should be block for delivery.
how to make the setting in system.
HarshHi
Put Delivery Block at Sales Order type in t code VOV8.
regards
kedasu.a -
Can't change quantity when copy from Sale order for Delivery
Hi all!
Can i use authorization for can't change quantity when copy from Sale order for Delivery.Tien,
Approval will not work when you have mutiple rows of data. You would have to work with SP Transaction Notification
There has been threads before on the forum on the same topics.
Block the Quantity in Sales Delivery
Approval Procedure for chaning quantity in Delivery Document
Suda -
Open Order scheduled for delivery
Hi there ,
Please suggest me the report to spool the Open Order scheduled for delivery for a material ....
Regards
KaushikHi
Check the delivery due list, its shows open orders due for delivery for a particular date
and the list can be printed or sent to spool
Anurag -
Bursting Control file, Error!! Could not deliver the output for Delivery
Hi,
I am using bursting control file to send report output to email in R12.1.3.
If the report output is having data, it is working fine. if there is no data it is getting errored out with the below message.
"Error!! Could not deliver the output for Delivery channel:null "
In the report output i put "No data found", when i click on view output the output in application is showing as "NO DATA FOUND" in PDF .
"Bursting VMC Approved Purchase Orders for a period (XML Publisher Report Bursting Program)" got above error.
my requirement is if there is no data, still i require the output to email.
Thanks in Advance
Adina.Hi,
I am facing the same situation and want the bursting program to finish in normal even when there is no data.
Can you please let me know how you resolved this?
Thanks
RG -
Root cause for delivery to show up on LX47 transaction
All,
I am new to SAP and supporting an off site warehouse location. I'm trying to research and locate the root cause for why a delivery shows up on LX47.
The situation the warehouse is experiencing is that they are having to run the LX47 transaction multiple times a day to correct delivery issues.
I know from my initial research that deliveries show up on LX47 due to the OB Delivery being blocked, and that this is caused by the OB delivery and related Transfer Orders do not match in the system.
What I'm trying to figure out is, from an Operations standpoint, what is causing the OB Delivery and the TO's not to match?
Is there only 1 reason? Are there 100? This is what I'm trying to understand.
The only thing I have found thus far is that 2 people/transactions are in the delivery at the time of the update. Is this accurate?Hi Nicholas,
I am sure you are very much aware about the process flow however i just want to narrate again, if the plant and storage location is WM managed then you generally create a transfer order with reference to the delivery document to perform the picking process now at the time of confirmation of the transfer order you can update the Delivery immediately (Standard SAP) or you can set the indicator to delay the delivery update(Check the below mentioned screen and IMG path).if you choose to delay the delivery update those delivery will appear in the LX47 and you have the provision to manually update the Delivery from there. (Apart from the above mentioned there are some instance where after confirmation of the transfer order and in between updating the delivery either material master / Batch master / or some other relevant parameter is in edit mode or locked which cause failure to update the delivery immediately and you will find those delivery will also appear in the LX47)
Hope this will help to get some idea about LX47 and reason for delivery whose appear in the LX47
SPRO PATH
SPRO---Logistic Execution---Warehouse management ---Shipping ----Define Shipping control -- Shipping control per warehouse -
Items due for delivery as per available stock
Hello Gurus,
May i know if there is report which gives me a visibility if all sales order items are available to create a delivery.
I know the report VL10H & VL10C gives the items due for delivery, these are reports that gives the as per the schedule line.
As you all know a sales order may get confirmed due to some production order and purchase orders are expected, if in case a production order is delayed and items are in no stock, we will not be able to completely deliver all the items.
thank youHi Verada
To know which orders can be delivered; a fresh ATP-check are required.
An idea could be to run the backorderprocessing (report sdv03v02) and use the resultlog and/or create your own report.
Kind regards
Søren Nielsen -
Release Orders Blocked for Delivery
Hello Experts!!
We have V.23, release orders blocked for billing.. is there a similar transaction where we can release orders blocked for delivery??
Help is greatly appreciated.Hello Carla,
Yes in the T-code "V.23", you can release the billing block for SALES ORDER in one single click. While releasing the delivery block for the Sales order the following T-code are useful:
1. VDBLOCK
2. V.14
3. VA14L
When you are using these T-codes, you get the list of all the Sales order which are blocked for Delivery. Then you can select the document for which you want to remove the delivery block and do the required updation.
Regards,
SARTHAK -
Sales Orders Blocked For Delivery
Hi,
Do we have T-Code for Sales Orders Blocked For Delivery other than VA14L,Because Customer name is not there in VA14L list.
Thanks,
NAGHi naga sudhir
Go to T-code--VA14L
In that go to menu-SettingsLayout--Current/Choose
In this layout u can choose fields what u want to appear in that row.
Any quries revert back to me
Regards
Srinivas. -
Purchase report on PO due for delivery
I wanted to get report of list of PO due for delivery/not yet delivered though delivery date is past
When i go ME2M, give open GR in Selection parameters and give delivery date then execute this gives list of PO's still need to be delivered
In output we dont have delivery date to review, is there any other way to fetch a report of list of PO's due for deliver and output must have delivery date as a column
ThanksCheck this links
past Due delivery date in PO
Report: PO with delivery date
Delivery due in days -
BAPI Error: No schedule lines due for delivery up to the selected date
Hi,
I have created a program to create delivery orders with reference to sales orders using BAPI - BAPI_OUTB_DELIVERY_CREATE_SLS.
After execution I get the error: No schedule lines due for delivery up to the selected date
Please help.
Thanks in advance!!!
Regards,
Sriramhi,
this is to inform you that,
please check the schedule line date in the sales order because the date is not matching here for the BAPI to upload.
here, for example the schedule line is 4 days after and you are running BAPI today. that will mismatch no.
the same thing is happening in uploading case also.
so please check the date.
because in teh sales order if teh schedule line date is today it will accept the uploading with out throwing any errors.
regards,
balajia
Maybe you are looking for
-
So you don't support corporate environments now?
Hey Adobe, were you aware that some businesses use your Flash plugin too? Or is that not on your radar? I just attempted to download 11.5.502.135 IE 32-bit version at my business. The reason was I set the last version to auto-update and guess what
-
PVC2300 - Video Monitoring System (3 urgent questions)
Hi there, I'm pretty sure these questions have been asked before - but could not find answers to these. Setup: When running a Video Surveillance setup, with up to 16, PVC2300 cameras connected to the Video Monitoring System (LBAVMS16): 1. Does the PC
-
Where is pointer pointing to in Call Library Function
I am using Call Library Function (FillString) to call a function in a DLL. I set Parameter 1 to: Parameter: arg1 Type: Array Data Type: signed 32-bit Integer Dimension : 1 Array Format: Array Data Pointer so the Function Prototype below in the Call
-
Hi, I am a fan of 360 QTVR Panoramas and I would like to enjoy the "virtual reality" also on my new iPhone. Is there a way to watch the QuickTime Panoramas on the iPhone 3G? Thanks for any help!
-
Call rest services and populate ViewObject
Hi All, I have scenario where i need to populate the view object data from rest services and while loading the task flow i need to call the rest service and load data into view object. So i marked java bean method as default activity in task flo