Surcode 5.1 encoding - Multiplex or not?

I have received great help here with my 5.1 surround mix and also encoding.  I use PP and Encorse CS4 and I am trying to clarify a setting in the SurCode Media Encoder which I am using to get from PP to Encore for a Blu-Ray disc.
Minnetonka seems to state that it is okay to Multiplex the audio and video in media encoder and import them into encore as one.  I understand you cannot listen to the 5.1 track in any event in Encore but I have no issue with that.
However in some posts I have seen, I had read that you needed to render the audio and video separately if you are doing 5.1 and to NOT multiplex them in Media Encoder.  Perhaps this depends on what version of PP you are running?  Any clarifcation most appreciated.  If it could be multiplexed, I guess that is one less chance to have an issue with audio Sync.
Also, I have the Manual for Surcode but is there somewhere where recommended settings for 5.1 endoding by Surcode are posted?  For example Data rate, etc.?
Thanks,
BJBBJB1

For DD 5.1 SS Export with the SurCode plug-in, you will want elemental/elementary streams, i.e. no multiplexing and two files. That will always be the safest way.
Also, ADL (Adobe Dynamic Link) will not work with this Audio material.
[Edit] Sorry but I missed that last part. This PrPro-Wiki FAQ Entry will tell you most of what you would want to know.
There are quite a few books on DD 5.1 SS, but most go into great depth on the recording, mixing and creation, and scant mention is made of the Exporting via SurCode.
Good luck,
Hunt

Similar Messages

  • Media Encoder CC 2014 not encoder in parallel mode.

    Media encoder cc normally render in parallel.
    Media Encoder 2014 will not.
    Why?
    2014 How do I render in parallel?

    That doesn't answer any of my questions.
    1. Are those custom or system presets?
        - If system presets, what are they?
        - If custom, could you specify the basic settings of that preset?
    2. Are you exporting to Dolby in any of those presets?
    3. Is "Enable Parallel Encoding" checkbox checked in preferences?
    The reason I ask is because we purposely don't allow parallel encoding with some combinations of settings and obviously if you disabled parallel encoding in the prefs, it will not work.

  • FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6

    Could you please attempt to shed some light on why FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6, yet apple finder is able to display thumbnails for these same FLVs without issue?
    I'm running CS6 Production Premium with ALL updates installed on 10.6.8
    I appreciate any input and help provided the input is provided by someone who either
    A) knows the answer because they actually work for adobe
    B) actually tried this themselves before attempting to provide a solution
    If the conclusion is that it is a codec issue or a header issue with the FLVs You'd have to present a very strong case to back that claim up as it makes no sense whatsoever that CS6 is unable to generate thumbnails for media encoded using CS6, yet Apple finder can without issue. NOT to mention the FLVs in question are CREATED on the same machine with the same codecs installed that is trying to generate previews in Bridge.
    Apologies if my frustration is showing, I've gotten and seen several... incompetent replies on this forum regarding this issue and it has never been actually addressed properly as far as I can tell by Adobe support.

    We are all just incompetent users here.  As pointed out before this is just a user to user forum, Adobe rarely checks in.
    I was hoping by now you would have gotten to the bottom of this problem and were offering a solution.

  • Adobe Media Encoder 2.5  Not Reading Canon XH-A1

    Adobe Media Encoder 2.5 Not Recognizing Canon XH-A1
    Vegas Bill - 01:34pm Sep 3, 2008 Pacific
    I have not been able to get the Canon XH-A1 to be recognized
    by the Adobe Flash Media Encoder v2.5. Get size error and sometimes
    configuration errors. Trying to do live stream with HD. Get error
    also stating the video size from the device is wrong size error.
    I get this on both XP and Vista Prem
    Any ideas of how to get this beast to connect live through
    the encoder or is there another solution for live stream to the
    media server 3? Need to get the Camera to feed live video directly
    from local camera & box to flash media server 3
    Thank you
    Bill

    Is this using Adobe Content Server?
    Aandi Inston

  • Premiere Pro CS4 Export fails with Media Encoder CS4 "Encoding Failed"," Could Not Read From Source.

    There has never been a history of Adobe CS3 installation on the brand new MAC Pro I am using prior to installing Master Collection CS4, despite other posts claiming that chief cause of this issue is a previous CS3, Beta or trial installations of previous versions. I simply had a straightforward installation of CS4 and have had trouble since day 1.
    I have uninstalled and reinstalled Master CS4 three times, two times with the action script cleaner for CS4. I tried changing Adobe Cache folder locations to alternative drives. I ran shift start many times to correct any inconsistencies and corrected for permissions using disk utilities repeatedly. All updates have been installed and I am still getting the same error when exporting my timeline to Media Encoder CS4, be it a large High Definition project or a small one consisting of few stills.
    No matter what presets I chose, the job appears as one of the items in the render qeuee of Media Encoder CS4 and sits there with the status WAITING until i hit Start Queue. When I do, it still says WAITING under Status and at the bottom corner of the window it reads : Loading "project name.prproj" and after an average of about 6 minutes, a yellow caution sign appears. No render whatsoever takes place. When I click on the yellow caution sign, it reads a log of all errors in connection with each job, including the ones that have gone before it. Here is one:
    Start of the Error Paste
    - Source File:/users/myname/Library/Caches/TemporaryItems/test.prproj
    - Output File:/ users/my name/Documetns/Adobe/Premiere Pro/4.0/Sequence 01.mov
    - Preset used :NTSC DV
    - Video:
    - Audio:
    - Bitrate:
    0 Encoding Time: 00:33:01
    Sat Mar 21 17:12:25 2009 : Encoding failed
    Could not read from the source. Please check if it has moved or been deleted.
    END OF ERROR Paste
    Please any gurus out there know how to troubleshoot this damn thing on Mac, I really appreciate it. I have not yet encountered any posts of Mac owners with no previous CS3 installation having this issue. I am in the middle of 3 projects with tight deadlines and need your urgent help. THANK YOU!

    Hello There,
    I resolved the issue through a simple process of elimination. So simple in fact I wonder how I missed it. Since there has been no history of prior CS3 installation on this machine and every conceivable trick was applied to resolve the problem (refer to my original post earlier in the thread) ending in frustration, the problem had to reside in a factor or series of factors that were only present in this machine. Of the two remaining causes different in compare to other machines, I had to look into the possibility of any hardware and/or software conflicts. After all, this very same installation works perfectly fine on my colleague's Apple Macbook Pro and several Windows machines.
    It turns out that I had installed Pro Tools on this machine that comes with all kinds of optional plug-ins in the so called ignition pack. One of these optional plug-ins is called IZOTOPE (three varieties include Spectron, Trash and another one that escapes my mind). They were all lite version licenses that would automatically pop up on their own when you would start a program where they had been residing. One such program where an association existed was indeed the Premiere. An annoying dialogue box directing you to buy the full version when you would start the premiere would refuse to go away. Sometimes it would even start on its own culminating in a a permanent dialogue box.
    The cause of the problem was right before my eyes and I had overlooked it. Once uninstalled using IZOTOPE clean uninstaller on step 4, the problem was resolved. Projects are now loading very fast into the AME and encoding begins in earnest. I have never had any issues ever since.
    Long story short, if you have any plug-ins specially the ones that are loading upon the start of any program or the ones that reside inside the premiere or the ones that start on their own independently, they could be one of the highly probable causes of this error. I have seen other similar posts complaining of plug in folders inside premiere that needed to be moved to resolve the issue for instance the ones that needed to be moved to AE folders. If you are a plug-in admirer, I would suggest to look into them seriously.
    On the side note, many combination and causes may lead to the same error. I am not claiming that this is the solution for everyone.
    It must also be noted that I applied the trick of creating a shortcut of Premiere (and naming it exactly as such) and dropped it into the Adobe Dynamic LInk folder (even though this was suggested for windows)and have changed the adobe Cache locations to an alternative folder on a separate drive. I haven't been able to establish conclusively if the latter steps are also essential in fixing the error on MAC but I can confirm that since the latter steps were taken before the uninstalling of Izotope plug-ins and i still had issues, probably uninstalling those plug ins or finding a way to move them to a place where they don't interfere (if you absolutely need to keep them) is the one essential step that solved the problem.
    Hope this helps.

  • The encoding "ISO8859_1" is not supported.

    I am trying to bring up WLS 6.1 for the examples that got shipped by BEA and I
    am getting this error:
    Starting WebLogic Server ....
    <Dec 28, 2001 5:50:46 PM CST> <Notice> <Management> <Loading configuration file
    .\config\examples\config.xml ...>
    <Dec 28, 2001 5:50:54 PM CST> <Notice> <WebLogicServer> <Starting WebLogic Admin
    Server "examplesServer" for domain "examples">
    <Dec 28, 2001 5:51:25 PM CST> <Error> <Management> <Error parsing XML descriptor
    for application examples:Name=petstore,Type=Application
    org.xml.sax.SAXParseException: The encoding "ISO8859_1" is not supported.
    at weblogic.apache.xerces.framework.XMLParser.reportError(XMLParser.java
    :1082)
    at weblogic.apache.xerces.readers.DefaultEntityHandler.startReadingFromD
    ocument(DefaultEntityHandler.java:541)
    at weblogic.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.j
    ava:310)
    at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:966)
    at weblogic.xml.process.ProcessorDriver.process(ProcessorDriver.java:131
    Can anyone please advise what I need to do
    KK

    Kubo,
    What platform are you running on? Did you change any of the config.xml, startPetStore
    scripts? Is this a 'clean install' and then you run startPetStore and receive
    this error?

  • My video needs to go on a SD DVD single layer-it is 1h 51m long-the only way I can make is fit is encode H. 264-not ideal-I am using the Share option in FCP-native media was shot 980x720...any other way to do this??

    My video needs to go on a SD single layer DVD…it is 1h 51m long…the only way I can make it fit is encode H. 264…not ideal…I am using the Share option in FCP…native media was shot 980x720...any other way to do this??

    To play on DVD Players, it has to be MPEG2.
    It's under 2 hours; I'm surprised it won't fit. If not, get Compressor and lower the bit rate to fit.
    The native resolution was 980X720…you mean 960?
    It will all be resized to 720X480, which is DVD standard.
    Russ

  • Requested Java encoder 'Cp932' is not supported by this JDK

    I've got :
    MS SQL Server 7.0 SP2 setup for Japanese using codepage 932
    WebLogic 4.51 using jdbcKona/MSSQLServer4 drivers
    JDK 1.2.2
    on Windows/NT 4 SP5
    I get the following when attempting to create a connection pool:
    registerDriver:
    driver[className=weblogic.jdbc.mssqlserver4.Driver,weblogic.jdbc.mssqlserver4.Driver@7bd40dd9]
    java.sql.SQLException: The requested Java encoder 'Cp932' is not supported by
    this JDK.
    at
    weblogic.jdbcbase.mssqlserver4.BaseConnection.setEncoding(BaseConnection.java:303)
    at weblogic.jdbcbase.mssqlserver4.BaseConnection.<init>(BaseConnection.java:66)
    at weblogic.jdbcbase.mssqlserver4.TdsConnection.<init>(TdsConnection.java:47)
    at weblogic.jdbc.mssqlserver4.TdsConnection.<init>(TdsConnection.java:40)
    at
    weblogic.jdbc.mssqlserver4.MicrosoftConnection.<init>(MicrosoftConnection.java:31)
    at weblogic.jdbc.mssqlserver4.Driver.newConnection(Driver.java:30)
    at weblogic.jdbcbase.mssqlserver4.ConnectDriver.connect(ConnectDriver.java:165)
    at
    weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:145)
    at
    weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:105)
    at
    weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.java,
    Compiled Code)
    at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java,
    Compiled Code)
    at
    weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:327)
    at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java, Compiled
    Code)
    at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:133)
    at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
    at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java, Compiled Code)
    at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:61)
    DriverManager.getConnection("jdbc:weblogic:mssqlserver4")
    trying
    driver[className=weblogic.jdbc.pool.Driver,weblogic.jdbc.pool.Driver@f6380ddf]
    trying
    driver[className=weblogic.jdbc.mssqlserver4.Driver,weblogic.jdbc.mssqlserver4.Driver@7bd40dd9]
    What is happening?
    Any help/info is greately appreciated.
    Thanks.
    -pc
    sien, peng-chong
    mailto://[email protected]
    918 parker street, suite a-12, berkeley, ca 94710-2526
    tel: 510.649.3757 | fax: 510.848.1533

    I figured out the problem with the sqljdbc4.jar but...
    now i am getting this error
    java.lang.ClassNotFoundException: No ClassLoaders found for: com.microsoft.sqlserver.jdbc.SQLServerDriver
         at org.jboss.mx.loading.LoadMgr3.beginLoadTask(LoadMgr3.java:212)
         at org.jboss.mx.loading.RepositoryClassLoader.loadClassImpl(RepositoryClassLoader.java:521)
         at org.jboss.mx.loading.RepositoryClassLoader.loadClass(RepositoryClassLoader.java:415)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:169)

  • Compressor not encoding Multiplexed MPEG-2 files after 10.4.9 update???

    When I try to encode a multiplexed MPEG-2 file (e.g., checking the 'Multiplexed MPEG-1/Layer 2 Audio' box under 'Extras'), Quicktime is unable to open the Compressor generated file and produces the following error (which has helped significantly with troubleshooting the issue):
    Error opening movie
    The movie could not be opened.
    Fortunately, MPEG Streamclip is able to open the file -- and provides the following alert:
    One or more transport stream files have a bad size. Do you want to open them anyway?
    This usually happens when a file is incomplete.
    As an experiment, I generated two multiplexed MPEG-2 files - one with Compressor and the other with MPEG-Streamclip, both were identical in file size...but the Compressor generated file won't open. Is anyone else running into this issue?
    Seemed to work before upgrading to 10.4.9.
    Running Compressor 2.3 (and all my other software is completely up to date). Even tried reinstalling the Compressor 2.3 updater.
    MacBook Pro 15" 2GHz   Mac OS X (10.4.9)  

    I also experienced a similar issue.
    Compressor was unable to encode a CBR 8mb/s, multiplex job. It rendered log results that said "Failed: 3x service crash". However, it still produced a m2t file. Compressor could not open this file (even though I have the quicktime mpeg 2 component installed). MPEG Streamclip was able to open the file, but it was not the same duration of the original file.
    I tried the same process for settings of 25mb/s CBR multiplex. This time compressor was successful. Compressor still could not open the resultant m2t file. MPEG Streamclip was able, as it was with my 8mb/s m2t file, but this time MPEG Streamclip warned me of opening a "Bad Movie..." I opened anyway and was able to view the entire video. However, Streamclip does not seem to offer options for encoding to MPEG. Meaning, there's no way to dictate the bit rate or other specs.
    The long and short of it; I hope apple figures this one out, because I don't want to have to use another product like Cleaner or BitVice.
    Any advice out there?

  • Media Encoder Multiplex fail - Mux suggestions?

    I edit continuing professional education seminars for streaming.  I use the same settings preset every time - a customer frame size in baseline profile H.264.  I have a particularly long project (8-hours) that I encoded overnight last night. AME log shows everything was sucessful:
    - Output File: H:\12_2012 Nunnallee\Nunnallee_Webcast_12_11_C_T_W_7_4_D_3.mp4
    - Preset Used: CPE Ipod-ready MP4 w 20 key fm
    - Video: NTSC, 700x290, 24 [fps], Progressive
    - Audio: AAC, 64 [kbps], 32 kHz, Mono
    - Bitrate: VBR, 1 Pass, Target 0.30, Max 0.50 [Mbps]
    - Encoding Time: 12:07:03
    12/12/2012 2:14:22 AM : File Successfully Encoded
    12/12/2012 2:14:23 AM : Queue Stopped
    but the files were not muxed together:
    I tried importing both files back into Premeire and neither seem corrupted. I just need to mux them together. Virtual dub won't mux H.264 files. Graph edit Plus won't import the M4V file.  The closest I've come is tsMuxer, which reads the files correctly, but doesn't seem to have an option for muxing to MP4.
    I tried the other options listed but they all seem to crash/not work.
    I'm going to bite the bullet and upgrade to CS6.  I can re-encode tonight, but it will still take a LONG time.  I'd like to work with the files I have, if muxing is possible.  Does anyone have any ideas?

    I don't want seperate files.  I WANT a single MP4, and this was what was checked in multiplexer export settings.  It just didn't work due to kind of glitch with AME 4. 
    I tried changing the M4V extension to mts, but graphedit and virtual dub still wouldn't import.  I actually WAS able to import the M4V file into MKVtoolNix software and mux into a MKV. It plays, however it turns out there was also a problem in the last 45 minutes of my 8-hour file.  Playback just stops.  So, it's all going to have to be re-encoded anyway.  CS6 is downloading now.  My threshold for pain has finally been reached.

  • Problem Encoding WMV to FLV with Media Encoder CS4 (but not with CS3)

    Hello,
    I have been attempting to encode some WMV files with Flash Media Encoder CS4 (I have Adobe Creative Suite CS4 installed) but it has failed, generating this error:
    - Source File: C:\Documents and Settings\usf\Desktop\incoming\ch01.wmv
    - Output File: C:\Documents and Settings\usf\Desktop\incoming\ch01_3.flv
    - Preset Used: Custom
    - Video: 624x343, Same as source [fps]
    - Audio: MPEG Layer III (MP3), 128 [kbps], Stereo
    - Bitrate: VBR, 400.00 [kbps]
    - Encoding Time: 00:06:36
    5/28/2010 11:26:16 AM : Encoding Failed
    Error compiling movie.
    Unknown error.
    On another computer where Adobe Media Encoder CS3 is installed (with Creative Suite CS3), I experience no such problem.  I do notice that when I add the WMV to Adobe Media Encoder CS3, it opens a window that prompts me to use "ffdshow", which will apparently work if it's configured to decode the file.  I click "OK" and start the queue in the encoder.  A few minutes later I get a successfully encoded FLV file.
    I have come to question whether Adobe Media Encoder CS4 should be re-installed, whether the entire Suite should re-installed, or if there is some patch or fix I can install somewhere.  Adobe Media Encoder CS4 is installed on my "production" computer which also has Adobe Premiere Pro (CS3) and Adobe Premiere Elements (7).
    Could use some advice here.
    Glen
    P.S.  the files will also not export to FLV using Adobe Premiere or Premiere elements...

    Again, the reason we are capturing with Windows Media Encoder is because we tried using Live Flash Encoder to capture directly into flash but our equipment wasn't fast enough and it was dropping frames all over the place.  We also don't have the space to capture into an uncompressed format because we don't have the available storage, and our events can be 8 hours long or more (each video is about 15 minutes, 20 or more videos)
    Ive listened to everything in my workflow and it sounds fine until the outputted FLV file from AME.
    WME is capturing at the following specs:
    160kbps 48KHz Windows Media Audio 9.2 codec (stereo) 1 pass CBR
    1800kbps 1 pass CBR video
    29.97 fps
    640x360 resolution
    buffer size: 5 seconds
    key frame interval: 8 seconds
    I have verified this with a codec info utility I ran on the wmv files.
    AME is encoding with the following specs:
    FLV Multiplexing
    On2 VP6 codec
    620x360 resolution
    800kbps 2 pass VBR
    100% undershoot at best quality
    160kbps stereo MP3 audio
    I verified the above with the same codec info utility (gspot 2.70a) and it is all acurate, it also told me that the audio is at 44.1KHz rather than 48 (there was no place to specify this, is this a limitatino of the VP6 codec?)
    Yes, these are our source assets.  They're being captured either through an XL2 via firewire, or from an analog program feed converted to firewire via a Canopus converter box.
    If anyone has any suggestions on how to get rid of this, or a different encoder (either to capture with rather low cpu resources, or to encode into flash) let me know.  I can provide a sample of the clipping if you need
    Thanks,
    Peter

  • Media Encoder CC will not install with PPCC on Mac OS 10.9

    After numerous tries after updating to Mavericks to install Media Encoder CC, it has failed each time. When trying to render projects in Premiere Pro CC a screen pops up that says I am using an old version of Media Encoder and need to update so I go to update and is says I have the most current version. I also have Media Encoder CS6 installed on this Mac which shows up under Applications but MECC does not. So, I have tried about three times to unistall Premiere Pro CC via the CC Cleaner Tool and upon reinstall, MECC still does not show up. Any thoughts?

    Moving this discussion to the Adobe Media Encoder forum.
    A/V Warrior I would recommend reviewing your installation logs to verify that no installation errors occurred.  Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files.  Please feel free to post any specific errors you discover to this discussion.
    Also in case it is applicable can you please provide the specifics regarding the computer hardware you are running Premiere Pro CC and the Adobe Media Encoder on?  Please see http://www.adobe.com/products/premiere/tech-specs.html for a guide of the hardware specifics which may be applicable.  You will also want to verify that you meet or exceed the system requirements.

  • Media Encoder CS6 does not always "Use Previews"

    I've attempted several transcodes using pre-rendered timelines in Premiere Pro. Media encoder does not always use the preview files despite the appropriate box being checked. Any suggestions what I can look for? I don't see that I am doing anything different between the times it works and the times it doesn't.
    Bruce B.

    We are all just incompetent users here.  As pointed out before this is just a user to user forum, Adobe rarely checks in.
    I was hoping by now you would have gotten to the bottom of this problem and were offering a solution.

  • Media Encoder CS4 does not work

    CS4 Windows 7 Media Encoder does not work!?
    From PremierePro to the Encoder (fullHD to MPEG2)
    The encoder is very slow and stops after time.
    And I see that the encoder try to make a .mpg file but it also makes .m2v and .mpa. in the same time?
    What to do???

    You'll have better luck asking such questions in the Premiere and AME forums.... Could simply be running out of temp disk space or a problem with teh Media Cache.... anyway, ask the pros...
    Mylenium

  • Premiere Pro CC 2014 and Media Encoder CC 2014 not completing encode.

    This is a project that I have been successfully encoding in short segments until now.  Now when encoding, session runs about 10-15 minutes and then ends without error messages. 
    Removing effects and changing to Mercury PB Engine SW did not help. 
    Also tried disabling metadata as suggested in another forum. 
    When CUDA used, logged as "Encoding failed."  When Mercury SW used, logged as "File Successfully Encoded" even though video file is only 6 KB with no content.
    Premiere Pro Build 8.1.0 (81)
    Media Encoder Build 8.1.0.122
    Windows 7 Professional
    Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
    8 GB RAM
    NVIDIA GeForce GT 610 (9.18.13.3788)

    I am having a similar problem.
    Premiere Pro CC 2014 suddenly decided to crash every time I export to either Adobe Media Encoder or within Premiere itself.
    The encode will usually go for 5-10 minutes before the programs either spits out a "serious error has occurred" window, or it just sits there frozen until I force quit.
    I did find a work-around for the moment. If I open AME and FILE > OPEN, select my project and then the sequence I want, AND put it in Software render mode, it will work.
    My timeline is 2K, 58 minutes in 23.976
    Only effects applied are Lumetri LUTs - no third party.
    I've exported as recently as a week ago without issue.
    Running OSX 9.5 on an X99 board
    3.75 GHz 8-core
    64GB 2400 MHz RAM
    EVGA Titan Black 6GB
    Because I can get my renders out, I am not too concerned. Either there is something wonky with my timeline that screws with any graphics enabled rendering, or there is a bug that is have the same effect. I will try rendering on another of my edit bays that utilizes a GTX 580 that I KNOW works. The Titan is pretty new to my workflow.
    Thanks Adobe, for checking this out.

Maybe you are looking for