Surely Apple didn't remove the ability to export selected clips????

So I've got a project I've been working on, and at this point I only want to export a specific section on it. From what I can tell, I can no longer export that specific footage. Is this really the case, and what the heck am I supposed to do? I tried to copy to another project, but my title sequence didn't come with it.
Surely Apple didn't remove this funcionality?

You could also select the part you want, do a COPY, then open a new project, PASTE, then export.
I didn't use iMovie 5 through '06, but as I recall in v4, you never had the ability to export a selection of a project, just clips. So if the part you wanted only was part of clips (and not the whole clip(s)) then you had to COPY then paste to make it a new whole clip before you could export it.
Patrick

Similar Messages

HT4970 Has Apple documented that it has removed the ability to share Reminders in IOS 6?

I have upgraded to IOS 6 and can no longer find out how to Share my Reminder lists. Based on what I can see - it appears that the functionality has been removed - but I can not find any thing directly from Apple that confirms this. I am relatively new to the Apple world and I am astounded that they would remove functionality in an upgrade. Is this common?

Hi, I have a similar problem. I live in the UK in an area where the 3G signal is weak. Ever since I have used iphone (since iphone 3G) - I have used it with 3G switched off when at home. That way it was forced to use the GPRS (or 2G) mobile signal from o2.
This worked fine, and I had 4 or 5 bars of signal always. If I enabled 3G at home that would drop to between 1 bar and NO SERVICE. This made using the iphone as a telephone virtually impossible as call quality was rubbish and often dropped out.
I used wifi for internet so it was never an issue, and I switched on 3G when out if I needed it.
Since the ios8 upgrade APPLE have taken away the ability to switch between 2G and 3G. Instead the button now switches between 4G and either 2G or 3G, this either is decided by the iphone itself depending on the strength of the 2G and 3G signals.
I have spoken to APPLE twice about this. The first time yeaterday they flatly blamed o2 and said it was nothing to do with them. So I called o2 and guess what; yes you got it, they blamed Apple. IT reminded me of when Steve Jobs got up on that stage and denied there was ever a problem with the iPhone 4 antenna a few years back.
So I called Apple back, and today the guy I spoke to did seem to understand my problem and sympathise with it. He said I was not alone and that hopefully it would be fixed by an update.
Luckily for me I am only 3 months away from an upgrade, so if they dont fix it by then I am going to take the leap and jump to Android.
The short term solution - and you need to be quick if you have already upgraded to ios8, is to downgrade to ios7.1.2
This is not officially supported by Apple, but it you google it, it is quite easy, you have to download an ipsw file and then do a restore in itunes, but you will lose everything on the phone, and you cannot back up from a backup made with ios8.
I hope they sort this out, it has driven me mad over the past 2 days.
We need the Toggle between 2G and 3G to be re-instated.

Why has ios6 removed the ability to gift on iPhone

Why has Apple removed the ability to gift Apps and music in ios6? I'm so, so angry about this issue. I want it back IMMEDIATELY!!!!!!

Hi, I have a similar problem. I live in the UK in an area where the 3G signal is weak. Ever since I have used iphone (since iphone 3G) - I have used it with 3G switched off when at home. That way it was forced to use the GPRS (or 2G) mobile signal from o2.
This worked fine, and I had 4 or 5 bars of signal always. If I enabled 3G at home that would drop to between 1 bar and NO SERVICE. This made using the iphone as a telephone virtually impossible as call quality was rubbish and often dropped out.
I used wifi for internet so it was never an issue, and I switched on 3G when out if I needed it.
Since the ios8 upgrade APPLE have taken away the ability to switch between 2G and 3G. Instead the button now switches between 4G and either 2G or 3G, this either is decided by the iphone itself depending on the strength of the 2G and 3G signals.
I have spoken to APPLE twice about this. The first time yeaterday they flatly blamed o2 and said it was nothing to do with them. So I called o2 and guess what; yes you got it, they blamed Apple. IT reminded me of when Steve Jobs got up on that stage and denied there was ever a problem with the iPhone 4 antenna a few years back.
So I called Apple back, and today the guy I spoke to did seem to understand my problem and sympathise with it. He said I was not alone and that hopefully it would be fixed by an update.
Luckily for me I am only 3 months away from an upgrade, so if they dont fix it by then I am going to take the leap and jump to Android.
The short term solution - and you need to be quick if you have already upgraded to ios8, is to downgrade to ios7.1.2
This is not officially supported by Apple, but it you google it, it is quite easy, you have to download an ipsw file and then do a restore in itunes, but you will lose everything on the phone, and you cannot back up from a backup made with ios8.
I hope they sort this out, it has driven me mad over the past 2 days.
We need the Toggle between 2G and 3G to be re-instated.

I am using a verizon email address and microsoft office for mac outlook program to manage my emails. Does any one know if the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

I am using a verizon email address and microsoft office for mac outlook program to manage my emails. Does any one know if the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

This is the Microsoft forum site that parallels what Apple has:
Office for Mac forums
It's not uncommon for MS employees who work with the Mac side of the business to help there. All in all a useful resource for Office:Mac

Accidentally removed the ability to use remote desktop

Hi,
Thanks to anyone that can assist.
Using SBS2011 Standard:
Whilst remotely connected and investigating ways to allow an ordinary domain user to have login access to the server, I inadvertently removed the ability of the primary domain admin user to gain access with remote desktop. By primary domain admin
user, I mean the default user created for administrative purposes at SBS set up/install time.
I was able to regain remote desktop access by adding this user to the Remote Desktop Users group. However this is really a workaround rather than proper corrective action. I know that this is not necessary in a basic default setup of SBS2011 as there are
other almost identical servers I look after where I have not needed to do this and yet still have remote desktop connection capability with "out of the box" settings.
Also, I would really like to find out what mistake I made so that I can avoid doing this again.
Tricky

Hello Larry,
Your suggestion of comparing ADUC across servers was one that I had already thought of and done but I did not notice any differences. Nonetheless, your post suggested to me that I ought to recheck my steps, so I revisited it and was mortified to find that
somehow the admin user was no longer a member of Administrators. I am baffled as to how I managed to achieve this because to the best of my memory, Administrators group membership was not one of the things I looked at in connection with my intent (read on
for my logic in this respect).
I suspect that this might be the problem! I will attempt to rectify and return to this thread in due course.
WRT granting a user logon rights at the server, I hear what you are saying and even said the same to myself. But let's just for the moment look at the real world rather than the ideal world. Many SBS installations are in the types of businesses that are,
let's face it, small (after all that is what the first S in SBS stands for). Such business cannot afford qualified IT personel and as such need to designate certain trusted members of staff to carry out some of the things that, if they had any, IT personel
would normally do. For example, swapping external USB hdd's and monitoring backup success/failure.
Rather than allow them to logon to the server as an administrator, safer I would have thought to allow them to logon as a user. Unless you can tell me of a way that this can be done from a user logon at their client PC? My knowledge is not encyclopaedic
so I am open to suggestions of a better way if such a way exists.
Tricky

I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip. Yes, I know I can add them up myself, but why? :-)

I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips. Yes, I know I can add them up myself, but why? :-)
I am using imovie 10.0.6

For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
Geoff

Why has apple removed the ability to sync calendars, contacts, notes, and what ever by hard wire and is forcing people to use iCloud?

Removing this ability has to be one of the worse moves that apple has made. Beleave it or not some people may not want to connect to use iCloud.

I hate iCloud, too
Never use it. I don't want to trust any of my real important data to remote servers.
Especially don't trust Apple and their servers with personal contacts info, my calendar and appointments info, personal note, etc.
I want the ability back to sync calendars, notes, contacts to my local computer and local storage.

It appears that Apple has taken away the ability to highlight, in color, file names, replacing them with just a hard-to-see colored dot. Can I get back the ability to highlight the whole file name in color?!

It appears that Maverick has banishd the ability to highlight, in color, file folder names, replacing the color highlight band with a hard-to-see color dot. Is there a way to get the color-band highlight ability to operate?

Welcome to Apple Support Communities
Apple has replaced that feature in OS X Mavericks by color tags, so you cannot get it back. The only thing you can do is to send feedback to Apple about it, so they will think about including it in future OS X versions > http://www.apple.com/feedback

Removing the ability to drag columns

In 11g the end-user has the ability to change the position of columns on a request... change the order, make them section headers etc.
I want to remove that ability - any one been able to do this and can let me know how its done, please?
Thanks - and 10 points to the first correct answer!!

Hi User,
Not possible for now.Open bug with Oracle,
BUG:10222173 - ABILITY TO DISABLE DRAG AND SORT FUNCTIONALITY OF COLUMNS
Rgds,
Dpka

Removing the ability to edit a form once it has been submitted

Good Day All;
I am not sure if this has been asked before......
Is there a way to turn off the ability to edit a form once it has been completed and submitted?
Thanks all
Chomp

Thanks Malcolm... That is what I thought... I guess there is no way to do it unless LiveCycle Designer is installed....
Chomp

Can Apple modify or remove the writing which is done by lase engraving on the back of the ipad?

HI,
I have received an ipad as a gift and on the back of that is some writing (6 words) .I want to know can is it possible to remove the writing ?or at least modify it to a flower shape or whatever?
Many Thanks,
SadeghAPP

I think that a professional engraver could modify it with some other design that makes the words no longer readable. As noted above the only way to get a smooth surface is to replace the cover.

TS1646 Apple needs to remove the auto-fill feature for the zip code!!!

Keep getting an error that states my billing info is incorrect, ever since I updated to 7.0.2!
Appears to be the zip code or middle initial...

I am 99.9% sure it's the update that is causing the problem. The problem started for me after my first purchase once I updated on Tuesday. Oddly, but thankfully for some reason I had not updated my son's iPad to I OS 7, earlier today out of curiosity I attempted to make an in app purchase and it went through no problem still using OS 6. When I checked mine, I still cannot make purchases. Apple said earlier in the week it was my bank, then it must be that I am continuously entering info wrong. The info has to be correct if all the 1.99 hold charges they process for confirmation when updating payment info have shown up on my account. The question now is can they fix this a.s.a.p or how long can it take to get a patch if the cannot.

Will Ebay.ca remove the ability to list in US dollars sometime in the near future

After reading on the boards as well as some of the comments on the weekly board, how many sellers think this will become permanent as it is in all other countries? Only listing in Can dollars on the Canadian site. Could be an interesting discussion

"Finally, as eBay's only dual-currency listing platform, our French and English sites present architectural challenges that sometimes slows or event prevents the delivery of new functionality that has tested well on other sites. Removing USD support would simplify things for eBay as well as the companies in our ecosystem moving forward.
If we do ever decide to retire the option to list in USD on the Canadian site, we will communicate that decision, then look to do so gradually, over a period of time, to minimize disruption for sellers. Canadian sellers who prefer to sell in USD would still be able to list using eBay.com. "________________________________________________________________________________________ Well, this was an interesting pronouncement, also interesting that Rodney stepped in to make it. I read "architectural challenges" as "too much cost", for one thing. Secondly, "delivery of new functionality that has tested well on other sites" sounds like a convenient excuse to me. They've been making new functionality work on .ca for quite some time. I agree with Pierre's view: "The way I read this comment by Rodney is that a final decision has not yet been made but will be made within the foreseeable future." ... and I suspect we had all better be prepared to be forced to list in $Cdn if we want to continue to list on eBay.ca. A few weeks ago when this topic was first mentioned by Raphael, I recall pointing out that eBay was probably trying to slowly get us accustomed to an unpalatable concept that would at some point be obligatory, by telling us that their "data" showed that all Canadian sellers would either benefit or see a neutral effect from listing in $Cdn. It seems that time is around the corner now. And I'm afraid I still think there is more behind this than the specious explanation given today would indicate. No wonder they removed the reference to "15% more sales when listing in U.S.". My goodness, who would want sellers to believe that if eBay needs (for reasons only they know) to have sellers list in $Cdn? New propaganda required, quick! Lastly, I find this part of Rodney's remarks rather disturbing: "Canadian sellers who prefer to sell in USD would still be able to list using eBay.com". So, let me get this right: It appears eBay will likely force us to list only in $Cdn on .ca in the near future. Yet many of us who mainly sell to the U.S. prefer to list in $US for obvious reasons of profitability. At that point, the only option will be to list on eBay.com. In other words, the only way Canadian sellers will really be able to make a profit (if you sell largely to the U.S.) will be to list on .com. Is it really just a coincidence that the recommended "workaround" for a longstanding and serious problem that we're told eBay will never fix (the ".com cart disconnect"), has been for Canadian sellers to list on .com exclusively? This would be a absurd suggestion if it were not that eBay might have other motives in trying to direct more Canadian sellers onto .com, i.e. to ultimately phase out (or at least pare down) eBay.ca. Consider this: perhaps this was the true reason eBay never resolved the cart disconnect -- they never intended to in the first place. One might even cynically say that the disconnect was a deliberate step toward getting more Canadian sellers to list on .com. Is eBay trying to "shepherd" Canadian sellers off eBay.ca? I personally believe so, perhaps for fiscal reasons. Quite frankly if I'm still around here in 2 years I wouldn't be surprised to see the whole site phased out.

Did Apple remove the ability to report Safari bugs?

If not, where is it?

I don't see it in the drop down menu, but you can always go to http://www.apple.com/feedback/safari.html, and for "Feedback Type," select Bug Report.

Has Lightroom CC removed the ability to Batch apply changes to many files at once (after import) using presets?

I've just upgraded to Lightroom CC and most of the changes are very welcome - especially the performance improvements.
However I've been processing several thousand images and in Lightroom 5 when wanting to apply changes to many images at once it was as simple as selecting the group of images and then right clicking, selecting Develop Settings and then selecting one of my many Presets from a sub menu.
This sub menu seems to have disappeared in Lightroom CC.
This is a MASSIVE problem for me as I cannot work out how to apply the presets to multiple images anymore.   I note that there is a tutorial on how to do it during import - but I want to specifically be able to do it post import, during development of large groups of images for clients.
Anyone know what has happened here and how we can get access to applying presets to multiple images during development under Lightroom CC?

Yes ssprengel.
I regularly work with all the Presets visible in the left of the Develop module.   But this cannot be used to apply the preset to multiple images.   For that (in Lightroom 5) you had to select the multiple images and then right click (on any one of the images) then go down the menu to Develop Settings, then select the Preset Folder and the Preset you wished to apply to all the images selected.   This worked well for me in my workflow.   But the access to the Presets through the Develop Settings menu has been removed in Lightroom CC.   ManiacJoe's solution above works - but it's accessed from the Library module.   That's kind of counter intuitive.   I want access to apply any preset I've saved to multiple images (in many cases t's being applied to thousands of images) from within the Develop module.   it makes little sense to apply a preset one image at a time to thousands of images when developing them
The whole idea behind presets was that they could be quickly and consistently applied across multiple images.   Removing this functionality is a backward step by ADOBE in my opinion and I really want them to add it back to the Develop Module menu systems.

Surely Apple didn't remove the ability to export selected clips????

Similar Messages

Maybe you are looking for