Surely someone knows why my ipod won't synchronize anymore ??
It plays fine. itunes plays fine. It simply will not synchronize. I have emptied it of all 13000 songs, factory restored it, and managed to get 4000 songs back on therre but now I can't even put one on there.
Why ? Why ? Why ?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
Someone to know ¿why my IPod touch (32gb) did not upgrade to IOS 7 ?
osomeone to know ¿why my Ipod touch (32GB) did not upgrade from IOS 6.1.5 to IOS 7 ?
The fourth generation iPod touches can't be updated past 6.1.5.
(97033) -
Does anybody know why my ipod touch 3rd generations screen does not work show anything? The screen is all black like it is switched off, but my ipod synchronises to my iTunes library. It is fully charged. Please Help!!!
Try here:
iPod touch: Hardware troubleshooting -
does anyone know why my ipod nano sixth generation is displayed in windows but not itunes? I followed all the suggestions but nothing.
I apologize if I write bad but I'm ItalianDoublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black constantly. When I try to synchronise my ipod with my iTunes library it comes up with a message saying " iTunes could not back up the ipod because a session could not be started with the ipod. Please help and reply if you know an answer!!!
Try this previous discusssion:
https://discussions.apple.com/message/12518406#12518406 -
Well,after that I´ve installed the new Mac OSX Lion...and navigate trough the panel,I see that the secondary click doesn´t work. I mark it in the trackpad´s panel but when I open it again,it shows the option with no mark,do someone knows why?
Same here. Tried a restart but that didn't help.
-
My Ipad2 crushes everytime I try to enter to the email settings, Someone knows why and can help me? I need to change the email password!
I restored the ipad, but still not working.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Store (or iTunes and App Stores) and sign out and sign back in.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D
sounds like the cable or the iphone connector are somehow damaged
-
HT3529 Im unable to receive picture by sms, someone know why?
Im unable to receive picture by sms, someone know why?
Pictures are sent via MMS. Make sure you have MMS enabled. Go to settings/messages and make sure MMS is turned on
-
Like idk how to ask but would anyone know why my iPod touch 4g will not connect to a computer to my apple account but yet it will only charge I have tried numerous cords and pc's and still the same occurs
Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
my 5th generation ipod won't sync anymore to my PowerMac G4. It worked fine, but when I installed a new hard drive it won't work anymore. I've re-installed iTunes, the latest version for Tiger, I've reset and restored my iPod. The ipod shows up fine in the source banner and I can transfer files to it, however when I unplug the iPod the files are not there.
Maybe try to repair the iPod's HD using Disk Utility located in the Applications -> Utilities folder. If that doesn't help, try a low level reformat of the drive using the same application. Make sure you choose Mac OS X Extended (Journaled) as the file system format.
B-rock -
Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore. I restored it, I backed it up and I held the power and Home buttons for the reboot and still nothing. I've been looking to see if any one had the same problem and one guy did but they tOld him it was his hardware, but I don't think it was because my friend was able to get it working but it would stop working again like in 10min. So, has anyone had the same problem and can help? Please, I will greatly apretiate it. :)
What do you mnean that the screen does not work?
When you touch the screen the iPod does not respond?
Nothing shows on the screen?
Or what? -
Does anyone know why my music wont play on my 7th generation iPod nano? I've tried resetting it already but that didnt work. Can someone please help.
I would to a Restore. Select the iPod in iTunes. Go to the Summary tab for the iPod. There is a button there to do a Restore. This will erase the iPod, re-install its software, and set it to default settings. After Restore complete, try playing songs on the iPod again.
If THAT does not fix the problem, and it's not bad headphones (since you also tried the "speaker"), there is probably a hardware problem on the iPod. All 7th gen nanos are still under warranty. If you have an Apple Store nearby, you should take it to the store's Genius Bar. To minimize waiting, you can make a reservation on store's web page.
http://www.apple.com/retail/ -
Does anyone know why some Apps won't load unless I buy a new App?
I've been following a couple of threads. It seems some users, myself included, have a problem where certain Apps will not load. They simply start to open and then return back to the Home screen immediately. When it happens to me (maybe once per week) it's always the same Apps which refuse to load, and they ALL do it - Pages, Keynote, Numbers, Garageband, iMovie, Shareplus all stop working. The reported fix from all users is to go to the AppStore and either update, or buy another App - even a free one. Then all Apps work again properly. It started happening for me after upgrading to iOS 5 but many users had the same issue prior to iOS 5.
So my question is, does anyone know why this is happening? I don't want to find myself out of 3G signal, or abroad when I've turned Data off, and unable to use my Apps. The fix is useful, but I can't understand why we even need a fix. Suggestions?Have you tried a full reset when this happens? This happens to me on rare occasion and a reset fixes things.
-
Someone knows why iMessage in iPad doesn't send message any more.
I usually used iMessage in my iPad, but now it does not send messages.
Someone knows how to fix it?If a Rest does not work [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!......
Then see this link and substitute iMessage for Face Time! https://discussions.apple.com/message/18217477#18217477
Maybe you are looking for
-
Create new partnertype for serviceorder ?
I want to add a partnerroll to my serviceorder, only I can only define new partnerrolls which relate to certain partnertypes like personelid or userid or vendor. in my case I need a partnerroll which just has an text element with no reference to othe
-
Cannot set default web template
Hi I'm trying to set default web template through SPRO -> IMG -> Sap NetWeaver -> B.I -> Settings for reporting and analysis -> Bex Web -> Set standard web template -> Ad hoc analysis. It works fine in Dev, but in Production the system seems to ignor
-
N96 Error Cannot get enough information about the ...
I am getting error "Error Cannot get enough information about the phone[3] "Unspecified error [1]" i downloaded the http://static.s2g.gate5.de/nokiamaps-client/nokia_ maps_3.01_09wk44_b01_s60_3.1_lm_rom.sis , but i am getting no signal and i cant syn
-
Windows has recovered from an unexpected shut down -- Windows 7 on 64 bit problems
Hi, I know lots of people have had this problem, but I need help --- it seems like since everyone has had this problem since 2009, there should be an easier way to fix it than all the complicated answers I have read so far. I have a Toshiba Satellite
-
Oracle Backup Question about backup files
Good Morning, Oracle Database 10g (Release 10.2.0.3.0) on RHEL 4 .DB = Data File .A = Archive Log File .CTL = Control File CCPROD_bkp_al_677429110_Set6100_Piece1 <<< What does these types of file do? control01_CCPROD_30Jan09_0101.ctl.bkup <<< What do