Surface Pro 3, Win 8.1. Adobe PremElem12 & PhotoshopElem12: roll back error when installing shared technologies

I'm a technical user of Macs,Windows machines.  Attempting to install the above software on a new Surface Pro3, Win8.1.  I'm setup as an administrator (only user) I've attempted about 2hrs worth of attempted loads with the same error.  I've attempted all forum items, shut off Win Defender, changed admins, deleted PDAppflex.swf and PDAppflex-app.xml, all useless attempts.  I get the feeling, I've wasted $$, appears this is a rampant wide problem.  I can't even imagine if others are going through this.

Blairjamel please see Install rollback and Shared Technologies | Windows for information on how to resolve your current error.

Similar Messages

  • Is Firefox compatible with Window Surface Pro and Win Phone 8

    Is Firefox compatible with Window Surface Pro and Win Phone 8

    A user posted here the other day who is using a Surface Pro 2, with Windows 8.1, so that should work basically the way it works on a desktop or laptop.
    Windows Phone, I don't think so.

  • What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

    Hello,
    My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
    The complete error message is:
    Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
    What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
    What I did already:
    check my RAM (16go gskill)
    remove unnecessary hard drives
    replace my "old" SSD with a clean new one
    remove my sound cards
    remove the mouse and use only keyboard
    reset the BIOS
    check every LED on the motherboard (asus sabertooth z77) and there is no problem
    What are the problems?
    Thanks,
    Adrien.

    Hi,
    If all images cannot be installed, we have a reason to suspect the hardware cause.
    If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
    Alex Zhao
    TechNet Community Support

  • PE 9 Fails to Install Shared Technologies - Adobe Support Stumped!

    I'm having the same problem as reported in the now closed thread http://forums.adobe.com/thread/725863?tstart=0.
    During installation, Photoshop Elements 9 installs Elements, then installs Organizer.  When it gets to the point to install Shared Technologies, it stops the install and rollsback (uninstalls everything).
    I've scoured the Internet and have not found a solution.  Spent 5 hours on phone with two Adobe support people - they cannot figure out what to do.
    This is a brand new laptop running Windows 7 64-bit.  No other Adobe products are installed, so there are no processes to kill (as suggested to look for in the above post link).
    I've tried the Adobe diagnostics utility noted in other posts on the Web.  It was useless.
    I've created new user accounts with Administrative rights. Still no luck.
    I've got anti-virus and firewall turned off as well.
    Now Adobe tells me they need to have 2nd level support contact me, which will probably take a week.
    I am at wits end and about to write Adobe off.
    If anybody has any suggestions, please help.
    Thanks!

    lyriamc wrote: This is a brand new laptop running Windows 7 64-bit.
    Which means its drivers will be out of date and may well have all kinds of junk installed. Work through the following, it frequently solves user problems with 'brand new' computers.
    PrE Hanging, or Crashing - Some Tips
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Why is my recently purchased adobe photoshop elements for Mac grainy when installed?

    Why is my recently purchased adobe photoshop elements for Mac grainy when installed?

    Please share a screenshot of the issue that you are seeing.
    Thanks
    Andaleeb

  • Move CC from Win 7 laptop to Surface Pro 3 Win 8.1

    Hello all,
    I subscribe to the full CC and I am going to be moving files from a Win 7 laptop to a Win 8.1 Surface Pro 3 in the next week or so and I was wondering...The laptop is my secondary or mobile production machine and it's also used in training adult photography students.  I would prefer to NOT disable the Adobe applications on the laptop prior to completing install and testing on the new machine.  I do understand the license is for two machines but my questions are these.  If the laptop is not powered up and running, would I be able to activate the applications on the new machine to be sure that they function as expected?  Or would I need to test them in the trial mode?  If this is the case, is there any functionality that is not operational while in the trial?  Are there any 'GOTCHAs' in doing this that I should know about from Adobe?
    Advice and direction is appreciated!
    Tony...
    di Sogno Photography

    Tony you can install and activate the software included with your Creative Cloud membership on up to two computers.  You can find additional details regarding the activation process at Activation & deactivation help - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

  • Trust Relationship Failed after Upgrading Surface Pro to Win 8.1

    I upgraded a Surface Pro to Windows 8.1 a few days ago. After the upgrade we are getting an error that says that "the trust relationship between this workstation and the primary domain failed". The Surface was joined to a Windows Server 2012 Essentials
    domain network before upgrading to Win 8.1.
    I brought the tablet back to my own office which is off the DC network and now it logs in without any problem, obviously using Cached Credentials.
    I found this
    blog post but I couldn't determine how it applies to my specific case. I do have a local Administrator's account that I can access.
    What could be causing this problem and what steps should I take to resolve it?

    I had someone else have a similar issue with a PC not surface and the solution was to disjoin it from the domain from rejoin it. I think that the upgrade process doesn't seem to retain all the settings correctly as my colleague lost some other stuff too
    during the upgrade. I've not tested it myself so can't really comment - but disjoin and rejoin should resolve the issue you are having. (I'm not sure why the person on the blog advises against this, as although there are other ways as mentioned - i've never
    had much success, whereas disjoin and rejoin fixes pretty quick.) Maybe others will share their thoughts on this. 
    Regards,
    Denis Cooper
    MCITP EA - MCT
    Help keep the forums tidy, if this has helped please mark it as an answer
    My Blog
    LinkedIn:

  • Image down to a Surface Pro with Windows 8.1 Enterprise use PXE fails at Driver Pack Install

    I am using SCCM 2012 SP1 running on windows server 2008 R2 deploying to windows Surface Pro, I am deploying Windows 8.1 Enterprise using PXE.
    It gets the pxe response, formats the HD, deploys the image, downloads the driver package, but when it installs the driver package I get a (0xC0000135) error. When it finishes it boots to windows 8.1 but is missing it's drivers. Here is the dism.log
    2014-06-10 15:49:06, Info                  DISM   PID=160 TID=1704 Scratch directory set to 'C:\_SMSTaskSequence\PkgMgrTemp\'. - CDISMManager::put_ScratchDir
    2014-06-10 15:49:06, Info                  DISM   PID=160 TID=1704 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
    2014-06-10 15:49:06, Info                  DISM   PID=160 TID=1704 Successfully loaded the ImageSession at "X:\WINDOWS\Pkgmgr" - CDISMManager::LoadLocalImageSession
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Failed to get and initialize the PE Provider.  Continuing by assuming
    that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Manager: PID=160 TID=1704 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE:
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE:
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=4
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Dism.exe version: 6.2.9200.16384
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Executing command line: "X:\WINDOWS\Pkgmgr\dism.exe" /image:"C:" /windir:"Windows"
    /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Loading Provider from location X:\WINDOWS\Pkgmgr\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Connecting to the provider located at X:\WINDOWS\Pkgmgr\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Loading Provider from location X:\WINDOWS\Pkgmgr\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Connecting to the provider located at X:\WINDOWS\Pkgmgr\WimProvider.dll. -
    CDISMProviderStore::Internal_LoadProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Loading Provider from location X:\WINDOWS\Pkgmgr\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Connecting to the provider located at X:\WINDOWS\Pkgmgr\VHDProvider.dll. -
    CDISMProviderStore::Internal_LoadProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Loading Provider from location X:\WINDOWS\Pkgmgr\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Connecting to the provider located at X:\WINDOWS\Pkgmgr\ImagingProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Loading Provider from location X:\WINDOWS\Pkgmgr\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Connecting to the provider located at X:\WINDOWS\Pkgmgr\CompatProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: WimManager
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: WimManager.
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: VHDManager
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
    2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
    [160] [0x80070002] FIOReadFileIntoBuffer:(1415): The system cannot find the file specified.
    [160] [0xc142011c] UnmarshallImageHandleFromDirectory:(511)
    [160] [0xc142011c] WIMGetMountedImageHandle:(2568)
    2014-06-10 15:49:06, Info                  DISM   DISM WIM Provider: PID=160 TID=1704 [C:\] is not a WIM mount point. - CWimMountedImageInfo::Initialize
    2014-06-10 15:49:06, Info                  DISM   DISM VHD Provider: PID=160 TID=1704 [C:\] is not recognized by the DISM VHD provider. - CVhdImage::Initialize
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting Provider VHDManager - CDISMProviderStore::GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM VHD Provider: PID=160 TID=1704 [C:\] is not recognized by the DISM VHD provider. - CVhdImage::Initialize
    2014-06-10 15:49:06, Info                  DISM   DISM Imaging Provider: PID=160 TID=1704 The provider VHDManager does not support CreateDismImage on C:\ - CGenericImagingManager::CreateDismImage
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting Provider WimManager - CDISMProviderStore::GetProvider
    2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    [160] [0x80070002] FIOReadFileIntoBuffer:(1415): The system cannot find the file specified.
    [160] [0xc142011c] UnmarshallImageHandleFromDirectory:(511)
    [160] [0xc142011c] WIMGetMountedImageHandle:(2568)
    2014-06-10 15:49:06, Info                  DISM   DISM WIM Provider: PID=160 TID=1704 [C:\] is not a WIM mount point. - CWimMountedImageInfo::Initialize
    2014-06-10 15:49:06, Info                  DISM   DISM Imaging Provider: PID=160 TID=1704 The provider WimManager does not support CreateDismImage on C:\ - CGenericImagingManager::CreateDismImage
    2014-06-10 15:49:06, Info                  DISM   DISM Imaging Provider: PID=160 TID=1704 No imaging provider supported CreateDismImage for this path - CGenericImagingManager::CreateDismImage
    2014-06-10 15:49:06, Info                  DISM   DISM Manager: PID=160 TID=1704 physical location path: C:\ - CDISMManager::CreateImageSession
    2014-06-10 15:49:06, Info                  DISM   DISM Manager: PID=160 TID=1704 Copying DISM from "C:\Windows\System32\Dism" - CDISMManager::CreateImageSessionFromLocation
    2014-06-10 15:50:07, Error                 DISM   DismHostLib: Failed to create DismHostManager remote object. Checking for dismhost.exe exit code.
    2014-06-10 15:50:07, Info                  DISM   DismHostLib: Found dismhost.exe exit code.
    2014-06-10 15:50:07, Error                 DISM   DISM Manager: PID=160 TID=1704 Failed to create Dism Image Session in host. - CDISMManager::LoadRemoteImageSession(hr:0xc0000135)
    2014-06-10 15:50:07, Warning               DISM   DISM Manager: PID=160 TID=1704 A problem ocurred loading the image session. Retrying...  - CDISMManager::CreateImageSession(hr:0xc0000135)
    2014-06-10 15:50:07, Info                  DISM   DISM Manager: PID=160 TID=1704 Copying DISM from "C:\Windows\System32\Dism" - CDISMManager::CreateImageSessionFromLocation
    2014-06-10 15:51:08, Error                 DISM   DismHostLib: Failed to create DismHostManager remote object. Checking for dismhost.exe exit code.
    2014-06-10 15:51:08, Info                  DISM   DismHostLib: Found dismhost.exe exit code.
    2014-06-10 15:51:08, Error                 DISM   DISM Manager: PID=160 TID=1704 Failed to create Dism Image Session in host. - CDISMManager::LoadRemoteImageSession(hr:0xc0000135)
    2014-06-10 15:51:08, Error                 DISM   DISM Manager: PID=160 TID=1704 Failed to load the image session from the temporary location: C:\_SMSTaskSequence\PkgMgrTemp\82E1FB72-A2BA-4355-B95D-2AC1A905B6D4
    - CDISMManager::CreateImageSession(hr:0xc0000135)
    2014-06-10 15:51:08, Error                 DISM   DISM.EXE: Could not load the image session. HRESULT=C0000135
    2014-06-10 15:51:08, Error                 DISM   DISM.EXE: Unable to start the servicing process for the image at 'C:\'. HRESULT=C0000135
    2014-06-10 15:51:08, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2014-06-10 15:51:08, Info                  DISM   DISM.EXE:
    2014-06-10 15:51:08, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    2014-06-10 15:51:08, Info                  DISM   DISM.EXE:
    2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
    2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
    2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
    2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
    2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
    2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

    Hi,
    This might cause the newer version .wim cannot be modified by the lower version dism.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Errors when installing Premiere Pro

    When I installed Premiere Pro all these error messages come up and it says installation failed. Adobe encoder will not open and Adobe Encore will not transcode. I am using a windows vista computer. Can Some one please help. thanks joey
    Adobe Device Central CS4
    Error:
    Error 2.
    Adobe Dynamiclink Support
    Error:
    Error 2.
    Adobe Encore CS4
    Error:
    Error 2.
    Adobe Encore CS4 Codecs
    Error:
    Error 1603. Error 1402.Could not open key: UNKNOWN\Components\163E0B0F7CCE48542B03C78F29551631\CCF5A2BFB18B2C840A90874096D4389E.   Verify that you have sufficient access to that key, or contact your support personnel.
    Adobe Encore CS4 LangPack (en_US)
    Error:
    Error 2.
    Adobe Encore CS4 Library
    Error:
    Error 1603. Error 1402.Could not open key: UNKNOWN\Components\B1DA4D4B28C80FF4DB94D6C430413368\4A0B590B5A057D6499880D83EF0B040C.   Verify that you have sufficient access to that key, or contact your support personnel.
    Adobe Media Encoder CS4 Dolby
    Error:
    Error 2.
    Adobe Media Encoder CS4 Exporter
    Error:
    Error 2.
    Adobe Media Encoder CS4 Importer
    Error:
    Error 2.
    Adobe Output Module
    Error:
    Error 2.
    Adobe Premiere Pro CS4
    Error:
    Error 2.
    Adobe Premiere Pro CS4 LangPack (en_US)
    Error:
    Error 2.
    Adobe Premiere Pro CS4 Third Party Content
    Error:
    Error 2.
    LangPack (English) for DeviceCentral
    Error:
    Error 2.
    Photoshop Camera Raw
    Error:
    Error 2.

    Ricky,
    simply find your work folder and save everything in safe place.
    If you have not changed any setting, it should be in user\your name.
    About uninstall, just launch it like you'd want to remove everything, then, when the program will ask you which application had to be removed,
    just sign premiere, mediaencore and company.
    Unfortunately for you, I'm quite agree with Harm.
    Ciao
    Giorgio

  • Get an error when installing Adobe Reader

    Each time I install adobe reader, I get an error at about 80 to 85% :
    Error B708EB72-AA82-3EB7-8BB0-D845BA35C93D
    HRESULT : 0x80070422
    I have Windows 7 familly.
    Thank you very much

    Hi,
    Please provide the windows installer log of Adobe Reader installation, it will be helpful to know the exact cause of filure.
    To get the windows installer log follow the steps given below:
    1. Enable the Windows Installer logging on your machine. ( Find the help to enable Windows Installer logging at : http://support.microsoft.com/kb/223300 ). 
        OR simply create the following registry key:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer\]
    "Logging"="voicewarmup"
    2. Now get the Adobe Reader Installer from http://get.adobe.com/reader/enterprise/ .
    3. Now try to install Adobe Reader.
    4. If Installation fails, cancel it.
    5. Get the Windows Installer log which is created in %temp% directory. It is a file, that begins with letters "Msi" and have a .log extension.
    6. Share this file.
    Thanks.

  • Error when installing app updates on Win 7 64 Bit machine

    I was trying to update to Photoshop CC 14.2 and I am getting an error.
    This is what I found in the log file.  help please?
    DF045: File corruption detected. Re-install the product & then apply the patch again. (Can not repair file "C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4\lib\ServiceManager-Launcher.dll")(Seq 6)
    02/06/14 11:40:18:929 | [WARN] |  | OOBE | DE |  |  |  | 9244 | DW063: Command ARKPatchCommand failed.(Seq 6)
    02/06/14 11:40:18:929 | [INFO] |  | OOBE | DE |  |  |  | 9244 | Completing installation for payload at C:\Users\CMSkrundz\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\s etup\payloads\AdobeCSXSInfrastructure4-mul-261213100542\Install.db
    02/06/14 11:40:18:984 | [ERROR] |  | OOBE | DE |  |  |  | 9244 | Failed to apply patch to file at "C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4\zlib1.dll", Patcher tool returned error: 32769(Seq 4)
    02/06/14 11:40:18:985 | [ERROR] |  | OOBE | DE |  |  |  | 9244 | DW063: Error rolling back command ARKPatchCommand(Seq 4)

    I have tried uninstalling and reinstalling the app before I dug into the Error Log File.  I got the error during the reinstall.  The app installed, but the update did not.

  • Error when installing Adobe XI Trial

    Hello,
    I get "The application cannot be installed due to a certificate problem.  The certificate does not match the installed application certificate, does not support application upgrades, or is invalid.  Please contact the application author." error when I try to install Adobe XI.
    How can I fix this? My windows 7 computer has Illustrator C6, InDesign C6, Media Encoder C6, Extension Manager CS6, ExtendScript Toolkit CS6, Creative Cloud, Content Viewer, and Bridge CS6 Adobe products on it, if this info helps.

    If by "Adobe XI" you mean Acrobat, I suggest that you ask in the Acrobat forum.

  • Error when installing Adobe Illustrator CS6 (64bit)

    Hello everybody,
    I've been trying to install all packages inside Creative Suite 6 Design Standard CD but the installation fails, then decided to install one by one and noticed the error comes only when installing Illustrator CS6 (64bit).
    My PC is runing windows 7 64bit and the error it appears says: win32 cabinet self-extractor stopped working.
    Could anybody give me a hand with this issue, I already look on the web but couldn't find something that really helps me.
    Br
    Angie

    If you are installing from a CD/DVD I don't think you have a Cloud suite
    First, try the Next link for a "Chat Now" button near the bottom
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    For future product questions, you will most likely get better answers in the specific product forums
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right to open the drop down list and scroll

  • Certificate error when installing Adobe Acrobat on iMac?

    I just attempted to download a trial of Adobe Acrobat and I encountered this error from Adobe Download Assistant:
    Sorry, an error has occurred.
    The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades or is invalid. Please contact the application author.
    Any advice?

    [Moving the discussion to Acrobat Forum]

  • How to get Adobe Elements 11 to finish downloading with the "Shared Technologies Error"

    Hey everyone
    I've tried many times to get my Adobe Elements 11 software to download, but every time more than half way through an error pops up saying Shared Technologies error, unable to install. Then it deletes everything and shuts down. It says for me to restart my computer and try again, I've done that many times..... if anyone has any information on how to finally get this software up and running that would be greatly appreciated!!
    Thanks guys!
    Heather

    Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
    Mylenium

Maybe you are looking for

  • XML Schema file in data definition

    Hi, I am creating a custom RTF template for a seeded data definition in the eBusiness Suite. The data definition has an XML Schema file loaded however this does not include all the data required for the template. Running the report to just generate t

  • The pictures are there, but can't find the library

    My primary HD for photos is external, and an iphoto library is there. Took my laptop out of town and loaded photos on it. It created a new library. I cannot figure out, however, where this puppy is stored. It is not in the usr/pictures folder, and ne

  • Woke up this morning to fan blasting and no response to keyboard

    I have been using my mac with a surveillance program called SecurutySpy for the last 3 weeks with no problem. I leave the Mac running all night and just turn off the dual monitors. Last night, after finally reading the manual for the program, I decid

  • Why provide fonts that can't be used??

    Adobe provided a huge list of fonts in InDesign CS4, but several are not able to be embedded when used because of licensing restrictions. Why did Adobe, in its infinite wisdom, provide fonts that can't be reproduced on the page? Along that same thoug

  • Login crashes at loading home directories

    I hope someone can point me in the right direction. About 2 weeks ago I replaced our network router with a brand new one. There were no directions for manual install, just a "wizard" to run for setup. BECAUSE I AM AN IDIOT I used the closest computer