Suri conflict with voice activation

Suri and Voice Activation - I have discovered an issue when using a bluetooth headset, when activating voice control via the bluetooth to call someone, if Suri is on the call cannot be completed. There seems to be a conflict between Suri and Voice activation from bluetooth.

Well, I have never come across this issue before, but it sounds like a quality of service issue and not really a port issue of any sort so I doubt opening any type of port will fix anything. If your ONT allows it, try bypassing our router with the linksys and see if the problem is fixed. Just want to verify it is the actiontech router causing the issue...

Similar Messages

Can I turn an iPhone 5 on with voice activation and Siri?

I'm a quad with limited function and want to know if I can turn an iPhone 5 on with voice activation and Siri? I'm hoping to wear it on my wrist.

No. If the phone is off there is no way to do anything.

Making a call with voice activation

I have been using a Palm for 5 or 6 years that has allowed me to make calls by either naming the individual (voice command) or saying the numbers. It is invaluable (and much safer) while driving. Does either the iPhone or any Third Party software support this capability?

Hello,
We can't even have the phone in our hands while driving in Québec. I currently have a Blackberry pearl and wanted to switch to the Iphone but without voice activation calls I won't... I only have to push on the main button on my bluetooth headset and tell my contact to have the call placed. Does this apps allow for some "automation" like when I get in the car I activate it and then I don't need to push any buttons on the phone ?
Thanks

Verizon router MI424WR conflict with voice over IP

I was recently as of Jan 6, 2009 set up with FIOS. In my network of computers and printers I also have a linksys T-mobile router with voice over IP (voIP). Very shortly after installing FIOS all was well until just recently (about 1 week ago) I started to experience a problem with the voIP. I get a dial tone and can call out however I can not hear the party's phone ringing and can not hear them talking. They can hear me talk.
I have the original firmware on the Linksys router. I was told that Verizon has done a firmware upgrade but can not give me the previous firmware.
Are there any suggestions for me to help getting my phone working?

Well, I have never come across this issue before, but it sounds like a quality of service issue and not really a port issue of any sort so I doubt opening any type of port will fix anything. If your ONT allows it, try bypassing our router with the linksys and see if the problem is fixed. Just want to verify it is the actiontech router causing the issue...

Apple voice activated hardware

Recently a dear friend was paralyzed from the neck down in a swimming accident. He is 20 years old and will soon have to be moved many miles from home for treatment and rehab. He has many supportive friends that will not be able to travel to see him. I want to find out if Apple has any type of program to help the disabled with voice activated hardware. I have no idea where to start. Any help would be appreciated.

The Mac-cessibility Network is devoted to connecting, compiling, and providing easy access to the best resources for blind, visually impaired, and other disability groups using Apple products:
http://maccessibility.net/about

WEIRD ACTIVITY - started with random activation of Voice Over Utility

Ok, really weird s**t happening with my PowerMac G5 running OSX 10.4.5 - while operating Logic Pro, the Voice Over Utility suddenly activated. I went in to disable it and noticed that Restart, Shut Down, and Log Out repeat in the pull down Apple menu. So in descending order, it is: Sleep, Restart, Restart, Shut Down, Shut Down, Log Out, Log Out. Everytime a website loads in Safari, a small audio sample of a sleigh plays. What the f**k is going on? Anyone else experiencing anything similar? Any help would be MUCH appreciated.
PowerMac G5 Mac OS X (10.4.5)

Hello Adam,
Not really weird. I assume that a command in Logic Pro (or a shortcut you've set yourself) is cmd-F5 or something similar. This is the keystroke to activate VoiceOver.
Once VoiceOver is activated, it does duplicate the commands on the Apple menu—you'll notice that the second occurrence of each has no ellipsis, showing that the dialogue box that would normally appear will be inhibited. Similarly, in Safari, when a page is loaded, VoiceOver signals completion of loading to the blind user by the little sleigh tune.
Suggest you investigate the shortcuts in Logic Pro and change any that conflict with the system (via System Preferences—>Keyboard and Mouse).
HTH
Archie

Current Android 2.1 OS Not Compatible with Bluetooth Voice Activation

After spending two frustrating days trying to make Bluetooth Voice Activation work with the HTC Incredible Android, I found out from HTC technical support that the Android 2.1 OS is not compatible with Bluetooth Voice Activation. Supposedly changes to the operating system will correct the problem, but you're out of luck until then.....whenever 'then' is! It appears that Verizon and HTC have not choosen to include that information in their marketing material. A bit irresponsible, especially if you live in a state that requires handsfree operation of your phone in an automobile.

It seems that Moto has a workaround in 2.1 on the Droid X:
I was just at VZW store this morning looking at the Droid X (which is currently at 2.1), and specifically asked an employee about this and he showed that it's solved on the Droid X -- he paired his bluetooth and demo'd handsfree dialing it for me.
Unfortunately, the Droid X is probably too large for me or my wife and the Droid Incredible doesn't have a solution for bluetooth handsfree dialing (yet).

Activating Mail account on iPhone causes conflict with Mail on iMac

I've been using my iPhone 4 to send/receive work e-mail via our Exchange server with no issue. However, when I tried to set up my phone to send/receive my home e-mail (provided by Cox Communications), it immediately caused a conflict with Apple Mail on my iMac. When I launch Mail on the iMac, I'm informed that the account is in use on another device and I need to work offline. I'm leaving for a 2-3 week trip and would really prefer not to have to log into the Cox webmail app all the time.
Is there a way to avoid this conflict and still enable me to get home e-mail on my iPhone?
BTW - I've contacted Cox and they've informed me that they provide no advanced e-mail support for any e-mail applications used by Macs.

As already provided, this is a POP account limitation that doesn't apply to an Exchange or IMAP account.
Although it is possible to access a POP account with more than one email client, a POP account is designed to be accessed with a single email client only. Only one email client at a time can communicate with the incoming mail server for a POP account - to check the account for new messages and/or download new messages available at the incoming mail server. When a 2nd email client attempts to check the account for new messages while another email client is doing the same or while another email client is downloading new messages available at the incoming mail server, the incoming mail server will temporarily lock out the 2nd email client from communicating with the incoming mail server.
Not a problem with an Exchange or IMAP account which are designed to be accessed by more than one email client with the ability for more than one email client to be accessing the server for the account at the same time.

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome. Works in IE. This is my first time trying to post a question - so please be kind. I am also not good with code and am finding css a real challenge after learning to design based on tables. I'm using CS5.
The "test" page with the slide show is: http://www.reardanwa.com/index-slides.html   The same page without the slide show is http://www.reardanwa.com/
I realize the images are not ideally sized - I'll fix those once I get the pages to function. Maybe I need a different slide show? I would prefer a widget that I can modify to required size & postition. Again - I'm not good at building with code from scratch.
The problem is the naviagation links that are directly next to the slide show do not work in Firefox of Chrome. They do work in IE.
I've read about using jQuery.noConflict(); code but can't figure out the correct way to use it in my case or whether that's even part of the solution. I know my code is not well organized as I have cobbled together from various sources in an attempt to format the page the way the client wants it. Also, FYI, I will eventually try to make the page work in Surreal CMS.
I've spent sevaral days over the last several weeks trying to solve sth slide show/navigation conflict - so any specific light you can shed will be much appreciated.
Thanks in advance.
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Reardan Area Chamber of Commerce</title>
<meta name="description" content="home page for Reardan Area Chamber of Commerce" />
<meta name="keywords" content="Reardan WA, chamber of commerce" </>
<script src="scripts/jquery-1.6.min.js" type="text/javascript"></script>
<script src="scripts/jquery.cycle.all.js" type="text/javascript"> </script>
<script type="text/xml">
</script>
<style type="text/css">
                              #slideshow {
                                  padding: 10px;
                                        margin:0;
                              #slideshow-caption{
                                        padding:0;
                                        margin:0;
                              #slideshow img, #slideshow div {
                                  padding: 10px;
                                  background-color: #EEE;
                                  margin: 0;
body {
          font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
          background: #004B8D;
          margin: 0;
          padding: 0;
          color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
          padding: 0;
          margin: 0;
h1, h2, h3, h4, h5, h6, p {
          margin-top: 0;           /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
           /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
.left
position:absolute;
left:0px;
.center
margin:auto;
width:95%;
.box
          position:relative;
          left:-90px;
          width:950px;
          height:350px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          z-index:1000;
.slide{
    position:absolute;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
          border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
          color: #42413C;
          text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
          color: #6E6C64;
          text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
          text-decoration: none;
/* ~~this fixed width container surrounds the other divs~~ */
.container {
          width: 960px;
          min-height:900px;
          padding:5px 0px 0px 0px;
          background: #E8F8FF;
          margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
          background: #E8F8FF;
          padding:10px 5px 0px 5px;
.sidebar1 {
          float: left;
          width: 225px;
          margin: 60px;
          color: #FFFF0D;
          background: #595FFF;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
    z-index:-1;
.sidebar2 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:2;
.sidebar3 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:3;
.content {
          padding: 0px 0px 0px 0px;
          width: 780px;
          float: left;
          background: #E8F8FF;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
          padding: 0px 15px 5px 10px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
          list-style: none; /* this removes the list marker */
          border-top: 0px solid #FFFF66; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
          margin-bottom: 50px; /* this creates the space between the navigation on the content below */
          font: Arial Black, Verdana, , Helvetica, sans-serif;
          font-size:1.3em;
          font-weight:bold;
          z-index:2;
ul.nav li {
          border-bottom: 0px solid #FFFF66; /* this creates the button separation */
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
          padding: 3px 0px 5px 0px;
          display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
          width: 185px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
          text-decoration: none;
          color: #FFFF0D;
          background: #595FFF;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
          background: #595FFF;
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
          color: #FFFFFF;
/* ~~ The footer ~~ */
.footer {
          padding: 10px 0;
          background: #595FFF;
          color: #FFFF0D;
          position: relative;/* this gives IE6 hasLayout to properly clear */
          clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
          float: right;
          margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
          float: left;
          margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
          clear:both;
          height:0;
          font-size: 1px;
          line-height: 0px;
-->
</style>
</head>
<body>
<div class="container">
<div class="header">
<a href="#"><img src="images/Chamber-Logo-2.gif" alt="Reardan Chamber Logo" width="187" height="163" hspace="10" vspace="5" align="top" /></a><img src="images/Reardan-Chamber-Title.gif" width="476" height="204" alt="Reardan Area Chamber of Commerce, Dedicated to Preserving and Enhancing Area Businesses" /><p></p>
<p style="color: #F00">This Site is under construction! Please pardon our dust as we create!</p>
</div>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="about.html">About Us</a></li>
      <li><a href="history.html">Reardan History</a></li>
      <li><a href="activities.html">Activities</a></li>
      <li><a href="business.html">Business<br />
        Directory</a></li>
      <li><a href="about.html">Join the<br />
        Chamber</a></li>
       <li><a href="links.html">Links<br />
  <span style="font-size: 85%">Tourism</span><br />
      </a></li>
    </ul>
     </div>
<br />
<br />
<br />
<br />
<div class="box" +"slide">
<script type="text/javascript">
// BeginOAWidget_Instance_2559022: #slideshow
                           slideshowAddCaption=true;
$(window).load(function() {
$('#slideshow').cycle({
                    after:                              slideshowOnCycleAfter, //the function that is triggered after each transition
                    autostop:                              false,     // true to end slideshow after X transitions (where X == slide count)
                    fx:                                        'blindX',// name of transition effect
                    pause:                              false,     // true to enable pause on hover
                    randomizeEffects:          true, // valid when multiple effects are used; true to make the effect sequence random
                    speed:                              100, // speed of the transition (any valid fx speed value)
                    sync:                              true,     // true if in/out transitions should occur simultaneously
                    timeout:                    5000, // milliseconds between slide transitions (0 to disable auto advance)
                    fit:                              true,
                    height:                       '300px',
                    width:         '525px'   // container width (if the 'fit' option is true, the slides will be set to this width as well)
function slideshowOnCycleAfter() {
          if (slideshowAddCaption==true){
                              $('#slideshow-caption').html(this.title);
// EndOAWidget_Instance_2559022
</script>
<div id="slideshow">
    
    <img src="images/100_1537.jpeg" width="600" height="450" title="caption for image1" /> <img src="images/Parade-2011-2.jpg" width="300" height="225" title="caption for image2" /> <img src="images/100_1495.jpeg" width="600" height="450" title="caption for image3" />
    <div title="sample title"> Images for slide show will need to be re-sized to fit box to avoid distortion</div>
    <img src="images/beach4.jpg" width="200" height="200" title="caption for image4" /> <img src="images/beach5.jpg" width="200" height="200" title="caption for image5" /> </div>

<div id="slideshow-caption"></div></div>
<div class="sidebar2" "anotherClass editable"><p align="center"><strong>Chamber News</strong><br />
Local News item
<br />
Another New item</p>
<p align="center">lots of news this week<br />
    <br />
    <br />
    <br />
</p>
</div>
<div class="sidebar3" "anotherClass editable"><p align="center"><strong>Upcoming Events</strong></p>
<div align="center">    <a href="activities.html" style="color: #FFFF0D">Community wide yard sales</a><br />
    <br />
    <br />
    <br />
    <br />
</div>
</div>
<div class="content"><br />
<br />
</div>
<div class="footer">
        <p align="center"><span style="font-size: small">Reardan Area Chamber of Commerce</span><br />
          <span style="font-size: x-small">[email protected] - 509.796.2102</span><br />
        </p>
        
</div></body>
</html>

If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
    float: left;
    width: 225px;
    margin: 60px 0px 60px 60px;
    color: #FFFF0D;
    background: #595FFF;
    border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;

6233 voice activated dialling feature. TERRIBLE!!!

For the last 30 mins I have been trying to find a way of recording my own voice tags for voice activated-calling on my 6233. What a waste of time. I think it is ridiculous that Nokia has not included this feature and according to the previous posts they are not going to put it into an firmware updates. I still have my Nokia 6230i which I think I will start using again. There are things I like about the 6233 but there are to many glitches, also the font for the time whilst in stand-by mode not only looks terrible but is hard to read. What are the people at Nokia thinking? They have put a load of junk on to the 6233 and not put the useful stuff that was on the 6230i on it. I've used Nokias for 8 years and I am now seriously considering getting a Sony Ericsson next time I can get an upgrade. WISE UP NOKIA!!

03-Mar-2007
11:45 AM
kludgefactor wrote:
The new voice recognition that appears in almost all of Nokia's latest products does have built-in training, called adaptation, which means over time and with use the accuracy should increase.
The trouble with speaker independent voice recognition is that for some people, the accuracy is good enough from the outset, but for others it is not. This is why adaptation is included in the Nokia version to help improve the accuracy - but it is hidden from the menus.
You can test this adaptation by using the voice dialler and if it gets the name or command correct, select that name or command. This tells the voice recognition to adapt to your voice. If you don't select, then it won't adapt.
If this is repeated for several names or commands, then the accuracy should start to improve.
Another problem is that sometimes people have strange names in the phonebook that can sometimes spoof the voice recognition - it is worth listening to any strange phonebook names using the "playback voice tag" just to make sure.
Kludge
that's alot to do especially when you don't have lots of time on your hands. its kind of ridiculous IMO. if it wasn't like that then names wouldn't make a difference whether its french or spanish or transfered from your sim, that's the names that confuses the voice dialler and causes it to come back empty, with the wrong name or a list of names. a headache while driving.
everything happens for a reason
check out my blog @ http://mycellife.blogspot.com/

Font conflict with Mac OS

Hi there
I hope this is relevant to this forum…
I'm having trouble with a version of Helvetica that seems to be conflicting with the Mac system fonts. So, the client sent us a packaged document with the fonts and all but we can't get them activated and recognised in InDesign. I suspect it's to do with a Suitcase / Mac OS conflict and not an InDesign problem, but I'm not sure where to look for help.
Any advice would be greatly appreciated.

Thanks! Sorry, things are pretty chaotic so I'll need a little more time to work through and figure it out, but that link looks like it'll be well worth reading through. The problem is happening on a colleagues computer, so I'm not 100 percent sure about software versions etc., but I can see how knowing that would be helpful.
So, the saga continues on Monday…
I appreciate your help!

Is voice activated dialling possible from a cark 9...

Apologies if this is really a dumb question.
Having used a Nokia bluetooth headset for years with my Nokia 6310i, and using voice activated dialling from the headset, I've finally had a cark 91 car kit installed in my car. Can I use voice activated dialling? I have them set up on phone but can't work out how to use them when the phone is in the cark 91 cradle. With the headset you had to push the button and speak after the tone, hence confusion now I haven't the headset and a button to push.
Thanks, Sue4089

I tried both methods and, actually both were really easy to do . When I added the DV-AVI file to the timeline and used the Motion properties to scale to 133% (constrained--so both height and width were enlarged), I lost the text I had in the title slide. Then I checked the photos--heads were cut off and on captions under the photos, the last line was missing. (I had enlarged the canvas in PSE and added text.) I tried reducing the scaling to about 80% which would maintain the captions, which may work--though I have black bars, but I sure had black bars in widescreen too--especially on the vertical photos.
My test may not be accurate since I don't have a 4:3 TV set any more. I tried the Sidebar setting on my widescreen TV. It may work better on a 4:3 set--I'll try that on someone else's set tomorrow. I had also put text on some photos and each line on the right side was cut off too. Without thinking I tried to edit it and move it--of course I couldn't because it was "fixed" in the avi file.That's the reason I had asked about editing the prel so I could start the 4:3 project and use everything I had already done in the 16:9 project and everything would still be editable. The draw back on scaling with that method is I have to do each photo individually unless there is a way to batch scale. Is there?
I am going to have to do more experimenting and viewing on a 4:3 set to decide which way works best for me.
Thank you so much for your suggested solutions

How do I unlock voice activation on iphone

How do I unlock voice activation on iPhone 4

Hi Kilted Tim, thank you for your quick response.
Yup, I've had the unlimited plan for about 4-5 years, and I do everything I can to keep from losing it, for obvious reasons.
As you advise, I've been using the iphone in airplane mode with wifi activated which works fine when I am in wifi range. But of course when I'm out and about I want to use my data roaming for internet, maps, skype, whatever so I take it out of airplane mode.
The trouble is that I get incoming calls and am charged international rates even when I dont answer. I havent looked lately but I think AT&T charges me for one minute even for unanswered incoming calls.
Any ideas?
Many thanks!

Flash Player 10 does not work in IE or Firefox. What could it conflict with?

I'm using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash. Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything. I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
Yup. Nothing. When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option. I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
Flash 10i.ocx (10.1.82.76)
FlashUtil10i_ActiveX (10.1.82.76)
FlashUntil10i_Plugin (10.1.82.76)
genuinst (6.0.2800.1531)
FlashUtil10i_ActiveX.dll (10.1.82.76)
NPSWF32.dll (10.1.82.76)
KB931433
FlashInstall
Install
Flashplayer.xpt
When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled. I even enabled the other Adobe add-ons for Acrobat and such just to be sure. Firefox shows Shockwave Flash and Shockwave for Director both to be enabled. The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website. I have DirectX 9.0c installed and everything else works fine. I can play audio and video elsewhere with no problems. It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
Any ideas?

Well, great. I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it. No such luck. The video still plays, but no sound.
All the sound settings are working with everything else from games to media players. I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
In the Flash folder, I now have:
Flash10l.ocx (10.1.102.64)
Flash Util10l_ActiveX (10.1.102.64)
FlashUtil10l_Plugin (10.1.102.64)
Genuinst (6.0.2800.1531)
FlashUtil10l_ActiveX.dll (10.1.102.64)
NPSWF32.dll (10.1.102.64)
And the setup and text files that went with 'em.
I've also done a system restart since then and zip.
I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go. The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
Now what? I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
Date: Sun, 14 Nov 2010 17:37:07 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
>

HT1438 i keep getting SIM locked message on my iphone 4s and I need to unlock it please please can someone help me? The voice activation is on and when I type in what I think is the code It wont even put in the numbers

I am trying to unlock my SIM from my iphone 4s, as I am getting a mesage SIM locked. How do I unlock this?Also I am typing in what I think my code is and it is not working. The voice activation wil not allow me to type in the numbers for some reason. I have turned it off and on about 7 times now. please please please can someone help me?

If you bought the iphone in the US and it is locked to a specific carrier, then you can't use a different sim (from another carrier). Is this your situation?
Otherwise I'm not sure what you mean by "trying to unlock my SIM". In which country did you buy the iphone? Who's your carrier?

Suri conflict with voice activation

Similar Messages

Maybe you are looking for