Surpressing and formatting screen contents in module pool

There is a lwedt  field on the screen
this ia a date field,
it must be shown on the screen as YYYY/MM
only how to do that (7 charecter visible lenth and format how ?)
please help.

Hi,
Create a data field of length 7 characters e..g
DATA: lv_lwedt(7).
In the PBO of your screen code the following:
CONCATENATE lwedt(4) lwedt+4(2) INTO lv_lwedt SEPARATED BY '/'.
And add the field on your screen in designated spot.
Cheers,
Aditya

Similar Messages

  • Error Invalid field format (screen error) in module pool

    Hi
    experts i am doing module in whichi had many check boxes on screen and each check box has function code means i want to do some thing else . but as i click the first or any other check box i get a error message
    INVALID FIELD FORMAT (SCREEN ERROR).
    Can anyody help me with this asnwers will be rewarded points .
    regards

    Dear Farukh,
    can you please let me know how have you declared you check boxes.
    how did you handle the click or the function codes in the user command module in your PAI.
    The declaration of your fucntion codes can be done when you create your screen fields and then they need to be handled in the user command module i.e what you want to do when suppose you click on that particular check box.
    Thanks
    venugopal

  • How to do ICON_EXPAND and ICON_COLLAPSE input fields in module pool screen?

    hi frnds.
    My problem is in module pool screen how to do ICON_EXPAND and ICON_COLLAPSE input fields in module pool screen?And how to do GUI STATUS and GUI TITLE? IN SE80.
      ITS URGENT.POINTS WILL BE REWADED.THANKS  IN ADVANCE.

    Hi,
    Go through this thread.
    [expand and collapse|expand and collapse]
    Cheers,
    Simha.

  • Selection screen problem in module pool

    Hi friends,
    I am working on module pool programming, I need to put select screen on the screen of the module pool porgramming. I used Input/Output field to do that and activated. But I am getting message invalid field format (screen error) can any one tell me why I am not able to run the seletion screen when I am using input/output field, also please let me know how to solve this problem.
    Regards,
    Line

    Hello,
    Think that this is useful for u/
    SELECTION-SCREEN - Defining selection screens
    Variants:
    1a. SELECTION-SCREEN BEGIN OF SCREEN scr.
    1b. SELECTION-SCREEN END   OF SCREEN scr.
    2. SELECTION-SCREEN BEGIN OF SCREEN scr AS SUBSCREEN.
    Effect
    Defines a selection screen with the number scr. scr may be up to 4 digits.
    SELECTION-SCREEN BEGIN OF SCREEN scr.
    Additions:
    (zu SELECTION-SCREEN BEGIN OF SCREEN scr) 1. ... TITLE title
    2. ... AS WINDOW
    Notes
    In reports (type 1 programs), a selection screen with number 1000 is created automatically when you use the SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statments. This selection screen appears when you SUBMIT the report.
    In any type of program (apart from subroutine pools - type S), you can define further selection screens using SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN. You enclose these statements between the SELECTION-SCREEN BEGIN OF SCREEN and SELECTION-SCREEN END OF SCREEN statements.
    You call these screens using the CALL SELECTION-SCREEN statement.
    Screen number 1000 is not allowed (reserved for standard selection screen).
    When you generate the program, all user-defined selection screens are also generated.
    Within a report (type 1 program), all SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statements outside a SELECTION-SCREEN BEGIN/END OF SCREEN block form part of selection screen 100 (standard selection screen)
    Regards,
    LIJO JOHN.

  • Customer Control in screen painter in Module pool - work like container?

    Customer Control option in screen painter in Module pool - work like container?
    is it true? How?
    Is like any work area or what?
    what is the excat use of that option?
    regards.

    Hello,
    In screen painter ,custom control is used to define the control area on the screen.Just click on that and make your own container area.When you create an ALV grid or TEXT EDITOR or any other control,it will get attached to the screen in that area through the custom container.
    Name the container area as say '<b>CONTAINER</b>'.(in capitals.)
    When you actually create the custom conatiner programatically,you should give the container area name.ie.
    Data : cont type ref to cl_gui_custom_container.
    Create object cont
    exporting
    parent = '<b>CONTAINER</b>'.
    Now,this container that you created-cont is attached to the screen in the area defined by CONTAINER.
    Regards,
    Beejal
    **Reward if this helps

  • Adding a screen element in Module pool

    Hi Experts,
             How to add a screen element in module pool programming?
    Thanks,
    Sudha...........

    Hi sudha ,
    To add screen elements in you module pool programming ,
    i > Go the layout of the screen for which you want to have elements .
    ii> Drag and drop the available elements from the left hand side .
    iii> Be sure to have a name a name of the data elements that you have inserted .
    iv>Check any dataelement is't showing red in color as red color signifies error .
    v> Make sure to save and activate the layout.
    Hope this would be clear .
    Thanks
    Lokesh

  • Regarding screen flow in MODULE POOL

    Hi everyone,
                          my requirement is to cretae a module pool program. In between a program is submitted VIA  a selection screen. That selection screen contains PUSH BUTTONS. If any push button is clicked one of the dialog screens of the module pool program should be called. Can any one tell me how can this be done.
    Thanks in advance.
    Regards,
    Y.Gautham

    write a Module in PAI of ur screen and call which ever screen u want to call or leave.
    for e.g -
    PROCESS AFTER INPUT.
    MODULE USER_COMMAND_0100.
    module USER_COMMAND_0100 input.
    case ok_code.
    when 'ENTER'.
    clear ok_code.
    leave to screen 200.
    endcase.
    endmodule. " USER_COMMAND_0100 INPUT

  • Search help for screen fields in module pool

    Hi All,
    I have a screen in Module pool which has 3 input fields, each input field is attached to the same search help.
    These fields are from ztable . I have created a search help USING these 3 fields. All the 3 fields are marked for IMPORT and EXPORT.
    So whenever i click F4 on any of the above 3 fields, It will display search help popup and returns some rows...But the values are transfered back only for 1 fields ..i.e for the first field only .
    I want that ...as soon as i select any of the row from Search hit list..all the 3 columns should get populated with corresponding fields from that row.
    I require it this way as user wants to select based on * selection.Ex: as then every this related to that should be popped up.
    Pls help ASAP
    Thanks,

    This is how i got.
    data:l_shlp type SHLP_DESCR,
    l_rc type sy-subrc,
    w_DDSHRETVAL type DDSHRETVAL ,
    ls_shintf LIKE LINE OF l_shlp-interface,
    t_DDSHRETVAL type TABLE OF DDSHRETVAL.
    DATA: dyname LIKE d020s-prog,
    dynumb LIKE d020s-dnum.
    DATA: BEGIN OF dynpfields OCCURS 3.
    INCLUDE STRUCTURE dynpread.
    DATA: END OF dynpfields.
    CALL FUNCTION 'F4IF_GET_SHLP_DESCR'
    EXPORTING
    SHLPNAME = 'YTESTDMSSB'
    SHLPTYPE = 'SH'
    IMPORTING
    SHLP = l_shlp .
    ls_shintf-valfield = 'X'.
    MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
    WHERE shlpfield = 'SNNTX'.
    MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
    WHERE shlpfield = 'SBRTX'.
    MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
    WHERE shlpfield = 'SBSTX'.
    MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
    WHERE shlpfield = 'ENPTX'.
    MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
    WHERE shlpfield = 'PLANT_CODE'.
    CALL FUNCTION 'F4IF_START_VALUE_REQUEST'
    EXPORTING
    SHLP = l_shlp
    DISPONLY = ' '
    MAXRECORDS = 500
    MULTISEL = 'X'
    CUCOL = SY-CUCOL
    CUROW = SY-CUROW
    IMPORTING
    RC = l_rc
    TABLES
    RETURN_VALUES = t_DDSHRETVAL
    IF l_rc = 0.
    LOOP AT t_DDSHRETVAL INTO w_DDSHRETVAL.
    CASE w_DDSHRETVAL-fieldname.
    WHEN 'SNNTX'. "W_SNNTX = w_DDSHRETVAL-fieldval.
    dyname = sy-repid.
    dynumb = sy-dynnr.
    dynpfields-fieldname = 'W_SNNTX'.
    dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
    APPEND dynpfields.
    WHEN 'SBRTX'. "W_SBRTX = w_DDSHRETVAL-fieldval.
    dyname = sy-repid.
    dynumb = sy-dynnr.
    dynpfields-fieldname = 'W_SBRTX'.
    dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
    APPEND dynpfields.
    WHEN 'SBSTX'. "W_SBSTX = w_DDSHRETVAL-fieldval.
    dyname = sy-repid.
    dynumb = sy-dynnr.
    dynpfields-fieldname = 'W_SBSTX'.
    dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
    APPEND dynpfields.
    WHEN 'ENPTX'. "W_ENPTX = w_DDSHRETVAL-fieldval.
    dyname = sy-repid.
    dynumb = sy-dynnr.
    dynpfields-fieldname = 'W_ENPTX'.
    dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
    APPEND dynpfields.
    WHEN 'PLANT_CODE'. "W_ENPTX = w_DDSHRETVAL-fieldval.
    dyname = sy-repid.
    dynumb = sy-dynnr.
    dynpfields-fieldname = 'W_WERKS'.
    dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
    APPEND dynpfields.
    ENDCASE.
    ENDLOOP.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
    dyname = dyname
    dynumb = dynumb
    TABLES
    dynpfields = dynpfields.
    ENDIF.

  • F4 help for the screen fields in module pool program

    Hi All,
      I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
    i could provide search help for two fields.
    but how to select matching fiscal year for that document number.
    problem: i am getting fiscal year as first four digits of document number.
    please help me to solve this problem.
    Thanks & Regards,
    Namratha.V

    Hi,
       If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
    In  this function module pass the screen no program & field for which u want to update value

  • Selection screen processing in Module pool

    Dear Friends,
    I am preparing a module pool, in which from one screen, i have to call a selection screen. I want to define this selection screen in the same program. Under which event block, i can define this selection screen?
    Once its called, how can i process the selection screen ( like START-OF-SELECTION etc ?). If i use a LEAVE TO LIST-PROCESSING to display some output, how can i process the user actions in this list?
    Thanking you in anticipation.
    Deepak

    HI Max,
    Thanks a lot for your reply. It was really helpfull. But my problem is not yet solved.
    When i call the selection screen from the PBO of a screen, the selection screen is not being displayed. Only the blank screen is displayed. So i tried another way. I put the CALL SELECTION-ECREEN  statement in the USER_COMMAN_100 module of PAI of the previous screen. (ie when user choose a button from the tool bar, in the initial screen the selection screen will be displayed.)
    module user_command_0100 input.
      OK_SAVE = OK100.
      CLEAR OK100.
      CASE OK_SAVE.
        WHEN 'LIST'.
          CALL SELECTION-SCREEN 200.
          IF SY-SUBRC = 0.
            PERFORM PROCESS_LIST.
          ELSE.
            leave screen.
          ENDIF.
    endmodule.                 " USER_COMMAND_0100  INPUT
    form process_list.
    ... reading database...
    IF SY-SUBRC = 0.
      LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 100.
      SET PF-STATUS 'GUI_LIST'.
        LOOP AT ITAB.
          WRITE :/ ITAB-BUKRS, ITAB-BELNR, ITAB-GJAHR.
        ENDLOOP.
      LEAVE SCREEN.
      ENDIF.
    endform.                    " PROCESS_LIST
    Now i have two problems to solve.
    1. I want to come back to the same selection screen (screen no 200) instead of screen 100, when the user click 'back' button in the list. but if i specify screen no 200 in
    LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 100.
    it gives runtime error. ( Msg: Selection screen ZTEST3 0200 was not called using CALL SELECTION-SCREEN). How to return back to selection screen?
    and
    2. If the user selects a line from the list(PICK/F2), that value has to be passed to the input field of first screen( ie the initial screen from where i called the selection screen : screen no 100) For this, where can i write the code to process the user actions in the list?
    Thanking you in anticipation
    Deepak

  • Screen problem in Module pool program

    Hi all,
    I have developed a module pool program, in which i have used simple selection screen and after executing it will call screen 9001 to display the data. everything is goin fine but if i leave my output screen as it is for some time (or even if i lock my system then unlock it) i am getting an error message
    "Selection screen ZDEV1110PGM_SF 1000 was not called using CALL SELECTION-SCREEN".
    do any one have idea why this is happining without doing anything further to the output.
    Regards,
    Nilanjana

    Have you used CALL SCREEN ?
    Regards
    Abhii

  • Problem in Screen field position ( Module pool )

    Hi Experts,
    We changed the screen field position ( GUI ) of SAP standard module pool program.  we had taken the access key from SAP and modified the layout.
    Our Problem :   We had transported  these change request to Quality and Pre Production. The changes are transferred correctly in Quality .  when coming to Pre Production the changes are not visible on  the screen.
    Checks Performed :  1. We had analyzed the Transport request - They are imported correctly.
                                        2. We had rechecked the layout that we had changed its good and correct.
    Can you experts help me out in identify the exact solution for this problem.
    - Best Regards,
    Sudhakar Puppala
    Edited by: CRM Sudhakar on Sep 16, 2010 11:25 AM

    Hi, no idea can be given without having a look..
    but just check the screen layout in the pre-production itself..instead checking transport..

  • Screen Attributes in Module Pool Programming

    Dear Experts,
    In Module Pool Programming, if we write LOOP AT SCREEN we can see and modify SCREEN-ACTIVE, SCREEN-INVISIBLE and other fields. But where we can modify Data Type and Other Attributes of the field dynamically?
    Thanks in advance.
    Regards,
    Kumar

    Hello Kumar,
    you can not change data type of a screen field dynamically. What you can change is an output length of a field. This can be done changing the value of SCREEN-LENGTH.
    Regards
    Adrian

  • Function module / table which lists screen numbers in module pool program

    Hi everyone,
    I wish to make a list of all screen numbers used in my module pool program Is there any FM / table which maps module pool program name with all the screens used in it?
    For example, if my module pool is SAPMZPROG and it has screens 9001, 9002 and 9003, then I want to have a report as follows:
    Input to the report (selection screen): SAPMZPROG
    Output:
    9001
    9002
    9003
    Thanks,
    Shailesh

    Hello
    Try tables D020S, D020T

  • Setting format and format options in Output module settings for render queue item

    Hello,
    I am unable to set the "Format" and "Format options" for video in output module settings programatically using After effects apis.
    I referred the after effects cs3 sdk guide for the apis.
    I find apis for all other options in the "outputmodule settings " like :
    AEGP_SetEmbedOptions
    AEGP_SetOutputChannels
    AEGP_SetStretchInfo
    AEGP_SetSoundFormatInfo
    But there is no api listed for setting the options available in the "Format" tab and "Format options" tab.
    The "Format" tab and "Format options" tab is available in the dialog that opens when user clicks on the Output module settings for the render queue item.
    The format tab when clicked shows a drop down list with aff different formats. By default "Video for Windows" is set.
    The drop down list contains following format options
    Adobe Clip Notes
    Adobe Flash video
    Quicktime movie
    Video for Windows
    I need to be able to set the "Quicktime movie" option in the Format tab programmatically and then set the compression type as "Animation" in the compression settings programatically using the api functions available in AE CS3 SDK
    Please suggest the suitable api to do so.
    I need to write my own plugin to export to Quicktime movie using the after effects apis.
    I follow below steps to do so.
    1. AEGP_InsertMenuCommand and add export option to AE with my own plugin name
    2. In the command hook, select active item using AEGP_GetActiveItem
    3. Add it to render queue
    4. Set the output module settings for 0 th output module using
    suites.OutputModuleSuite1()
    5. Use different functions from suites.OutputModuleSuite1() to set the output module settings like EmbedOptions,StrechInfo etc.
    6. Till this step, I am doing it right. But I am not able to find any api for setting Format options using suites.OutputModuleSuite1()
    I also checked all other suites available for setting FormatOptions but no luck.
    Please help.
    Thanks,
    -Namita

    Hi Namita,
    I am experiencing the same problem.
    I am using AE CC SDK, and I am unable to change the outputmodule format to any of the other movie format types (mov, mpg, flv, etc.).
    It is always set to "avi"
    I even compiled and ran the Queuebert example in the SDK, and there I get the same problem: the path extension is always left on ".avi"
    Does anyone know how to change this?

Maybe you are looking for

  • Customer (or Vendor) Ageing Report Problem

    Dear Experts, Firstly, Glad to be before you. Here, we have developed tht ageing report for Customers and Vendors.In which the Partial payment line item (let us say A) against an Invoice (lets say X) is not being shown under the same age of Invoice L

  • Problem with ALV GRID layout

    Hi friends really need yours help I have to show an ALV grid with checkbox as first column. This checkbox is based on internal table condition may be enabled or disabled, other columns are disabled. I used the structure 'ZMESD' where i decleared that

  • Rman Backupset size is exceeding the database size

    Hi my rman backup size is exceeding the database backup size and occupying the full mountpoint. and finally due to space issue, backup is failing. Below is the RMAN script run { backup incremental level 0 tag ASCPLVL0 database plus archivelog ; delet

  • How to "include" another page or servlet in a standard servlet

    How can I achieve a "include" in a servlet? From what I see... the include() method is on the PageContext class, which is in org.apache.somewhere... right?? Or am I missing something? thanks

  • Audio pops in PPRO CC 2014

    I am getting PAINFUL audio pop in Ppro with MP3 audio tracks. As I move the CTI, it will max out and blow my eardrums to pieces. Any idea as to what would cause this? -gl