Surrond effects (DTS/DD) not working

Hello!
I've got some problems getting DTS/DD effects working on my Logitech Z-5500 sound system (connected through SPDIF). My sound system have an lcd panel which shows current input, effect and so on. I've two samples with DTS and DD sound, but every time I play those sound effect defaults to stereo x2 or is completely silenced. Note that those samples works with DTS and DD effect out of the box on Windows 7 using vlc player so it's not an hardware issue. I haven't found any helpful solution on the wiki or internet yet so I'm begging you for any configuration tips! I'm using KDE with Pulseaudio, recently updated. Players that I've tested: vlc, mplayer, xbmc (so I don't think it is media player related) Thank you!

I have tested both with 6 and 2 channels (I suppose that I should choose 2 channels for the spdif output). The analog connection works fine with the 5.1 sound. I know that I can only get the stereo output through spdif, but my sound system is still capable of DD and DTS playback which is working correctly under Windows.
Well, I could use ALSA if it is possible to get multiple sound outputs at once (sound from flash content, media players, etc.) and application separate volume control. If it's possible to get it on ALSA and get the DD/DTS effects without any bigger struggle, I can give it a try!

Similar Messages

Ac3 dts audio not working in my iphone but it works in my friends samsung mobile?pls help me.

Iam using o player... Ac3 dts audio not working msg showing

Settings > General > Reset > Reset Network Settings
Contact the carrier.

Adobe After Effects CS3 does not work on my new iMac

Hello everyone,
I recently bought myself a new iMac and Adobe After Effects CS3, and guess what, the stuff does not work. I've tried almost everything, been on a lot of forums but can't seem to find any solution. One thing that keeps coming back is that it has to do with the Geforce 8800 GT in my iMac, some kind of compatibility problem between both.
The problem is this, whenever I start AE CS3, a window pops up, stating "Out of Memory ( 23 :: 40 )".
And then something about licensing, but I guess I can skip that window, since that clearly has nothing to do with the problem.
Are there some beta drivers or something for my videocard that I can download somewhere to maybe get rid of this problem?
Thanks in advance,
Maxim

Maybe an answer at http://www.adobeforums.com/webx/.59b665be/1

After Effects CS6 does not work on Mac OS 10.9.1 Maverick

I made the mistake of updating my OS not realizing that After Effects wasn't going work. Short of backing up to disk my data and reinstalling an older OS, what do I do now? I'm in the middle of a project and this is casusing me problems. HALP :-/

Install the most recent update:
http://adobe.ly/AE_CS6_1104

SB0460 AC3/DTS decoder not working on Windows 7 (Driver 2.18.0015)

Hello everybody!
I hope somebody will be able to help me with my strange problem:
I just did the move from Windows XP (x64) to Windows 7 (x64) and discovered that the X-FI's AC3/DTS decoder is not working. All I get is either noise/static/crackling (AC3) or no sound at all (DTS). I have an X-FI XtremeMusic card (Serial: MSB0460535000206P) and the decoder is working absolutely fine on Win XP.
The latest driver version 2.8.005 is installed. I have also tried the first driver (2.8.003) that was supposed to have fixed the decoder under Windows 7. The changelog there says: Dolby? Digital and DTS? decode re-established for sound cards that included decoding in their Windows XP drivers. No such luck for me.
My sound card is definitely supported so I'm wondering why it's not working.
Use Built-in Decoder is selected in the Audio Control Panel I'm passing audio to S/PDIF (from e.g. PowerDVD or MPC-HC). On Win XP usually the on screen display pops up when the decoder detects the signal, nothing on Win 7.
(Note that I am NOT trying to input a signal from an external source.)
Gi'ven everything I have tried, logic tells me that there may still be a bug lurking in the decode driver.
Any ideas?

FI think you have to pay now for the decoder when using digital output but not sure what soundcards are limited.... otherwise try this drivers and see this help but i dont know if they will work...
http: //forums.creative.com/t5/Sound-Blaster/PAX-PCI-XFI-ALL-OS-Driver-V4-5/td-p/574643

Hi,Lighting Effect Feature is Not Working

Lighting Effects in Filter is not working in my system Suddenly. Could u please help me on this issue? What will be the Problem?

My Lighting Effects filter does not show controls for the lights. | Mylenium's Error Code Database
Mylenium

When i create a slideshow in iphoto using the ken burns effect it will not work in idvd. any tips please.

when i create a slideshow in iphoto with the ken burns effect it works fine. when i then transfer it to idvd it will not work. any tips please.

With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
how are you getting the slideshow into iDVD?
what size slideshow did you send to iDVD?
can you export the slideshow to the Desktop and play it with Quicktime Player there?
what fixes have you tried?
how much free space on your boot drive?
Here's how you should create and sent a slideshow to iDVD from iPhoto:
Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. For iPhoto 9.4.3 and earlier select Size = Medium or Large. For iPhoto 9.5 and later selct 480p.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

Ac3 and Dts is not working

Hi I have a Creative SB0090 Audigy Platinum Sound Card but i canT have it to play Ac3 or Dts on digitaloutputs.
I am using Mediaplayer Classic,Earlier it was ok buth not any more.
I send the signal from my pc with a coax cabel to my digital input on my receiver a Harman Kardon Avr 5500.
Should i use a Ac3 filter in mediaplayer ? Must i add it and enable it in the player then or is there a Ac3 dekoder originalt in MP Cl (3 2 )?
Should i uninnstalled all drivers and reinnstalled it from my original cd , or can i youst go to automatic update ?
Happy if somone cab help mee :PMessage Edited by Ulven on 08-3-2005 07:02 AM

FI think you have to pay now for the decoder when using digital output but not sure what soundcards are limited.... otherwise try this drivers and see this help but i dont know if they will work...
http: //forums.creative.com/t5/Sound-Blaster/PAX-PCI-XFI-ALL-OS-Driver-V4-5/td-p/574643

Effects panel is not working on editable text? Any ideas on how to fix this?

Trouble shooting this with even starting with a new box and still having the problem.

In order to apply Effects to text, Muse needs to rasterize the text into an image. Therefore, Effects on text will only works if you have chosen a System Font or if you have rotated your text - both of which force the text to be rasterized. The ability to select an Effect for Web Fonts or Web Safe Fonts depends on browser compatibility which is not equal for all browser platforms as compatibility with CSS on browsers is something which Muse cannot control within its design , We allow users to apply it to text using System Fonts because we are already rasterizing the text frame.
If you want effect on the text frame you have to add a stroke.
Adding effects to text | Adobe Muse CC tutorials
Thanks,
Sanjit

Many effects missing or not working

Hello everyone
First of all, sorry if there are mistakes in my sentences, I'm french (but willing to learn english)!!
I'm posting this because I would need some help on After Effects CC, and I would appreciate the help of your community
For scholar reasons, I couldn't use this software during 10 months. Today I've been led to use it again, but... strangely, I got many problems with my plugins effects.
For example, when I launch AE, this error window pops :
Furthermore, when I'm compositing, it seems that several basic effects are missing. For example, I can't use the "Brightness & Contrast", because it's "missing".
On the other hand, there are effects that are still here (for example, Color Balance is still working)...
Do you know what I could do in order to "reinstall" all the basic effects that are missing ?
Thank you very much for your attention.
Best regards,
Doubi

Hello Mylenium,
Thank you very much for your answer. I reinstalled the program and checked my system's user privileges, but it didn't fix my problem. However, I realized that many effects were duplicated at several locations on my hard drive. So I deleted all superfluous copies, and now everything is working. :-)
But, unfortunately, another problem has occured... Indeed, when I ask AE to open my most complicated composition, I got a series of error windows, and then After Effects crashes.
Now, what puzzles me is that in every other compositions, the plug-ins "Photocopy" and "Spill Killer" are working perfectly well...
Do you know what I can do about it ? :-//
Thank you for your attention :-)
Best regards,
Doubi

Tooltip Fade Effect in IE7 Not Working

I'm hoping someone has a fix for this ...
When using IE7, the first time you mouse over a
tooltip—everything works fine.
But if you mouse over it again, the Fade Effect no longer
works. Is there a way to fix this clitch??

Does anyone know when a next version of Spry is going to be
released. I can't seem to fix this problem and I'm hoping that it's
fixed in the next version.
When using IE7, the first time you mouse over a
tooltip—everything works fine.
But if you mouse over it again, the Fade Effect no longer
works. Is there a way to fix this glitch??

Edge Text Effects in Chrome not Working - from Dan Carr / Inspire Mag article

I've been working with the tutorial in the September issue of Adobe Inspire to create text effects with Edge Animate - see link:
http://www.adobe.com/inspire/2013/09/edge-text-effects.html
I can get it to work well in IE and Firefox but nothing much happens in Chrome.
Anyone any idea where I may be going wrong?
My problem is with the section specifically relating to using Edge Animate - the other parts of the tutorial work OK in Chrome when using a plain HTML file but I'm interested mainly in adding the text effects to existing Edge compositions.

Here's an example based on the tutorial - just open in the different browsers to see the problem:
http://www.wizinnovation.com/edge/boardWithSVG.html
DDcreams mentions a problem with webkit browsers which I expect is correct - I have no idea where to start to try and fix it though!
Here's a paste of the edgeActions:
* Adobe Edge Animate Composition Actions
* Edit this file with caution, being careful to preserve
* function signatures and comments starting with 'Edge' to maintain the
* ability to interact with these actions from within Adobe Edge Animate
(function($, Edge, compId){
var Composition = Edge.Composition, Symbol = Edge.Symbol; // aliases for commonly used Edge classes
   //Edge symbol: 'stage'
   (function(symbolName) {
      Symbol.bindElementAction(compId, symbolName, "document", "compositionReady", function(sym, e) {
         // insert code to be run when the composition is fully loaded here
         // Load text animation JS
         yepnope({
                   nope:[
                   'libs/raphael/raphael-min.js',
                   'libs/textfx/Text.js',
                   'libs/textfx/svg/SVG.js',
                   'libs/textfx/svg/SVGText.js',
                   'libs/textfx/svg/SVGTextBlock.js'
                   complete: init
         var textAnimation = {
                   params: {
                             fontStyles: {
                                       'font-family': 'Arial, serif',
                                       'font-size': 60,
                                       'color': '#9080c7',
                                       'stroke': '#fff',
                                       'stroke-width': 1
                             letterSpacing: -2,
                             wordSpacing: 24,
                             easing: 'backIn',
                             duration: 550,
                             delay: 15,
                             type: 'letters'
                   canvas: null,
                   text: null,
                   addCanvas: function(div){
                             this.canvas=new Text.SVG(div);
                   addText: function(txt, styles, params){
                             $.extend(this.params.fontStyles, styles);
                             $.extend(this.params, params);
                             this.text = this.canvas.addText(txt, this.params);
                   animate: function(type){
                             this.text.animate(type);
         sym.setVariable("textAnimation", textAnimation);
         // Draw the text animation
         function init(){
                   textAnimation.addCanvas(sym.$("text_animation"));
                   sym.play(0);
      //Edge binding end
      Symbol.bindTriggerAction(compId, symbolName, "Default Timeline", 0, function(sym, e) {
         // insert code here
         var styles = {
             "font-family": "Microgramma, Arial"
          sym.getVariable("textAnimation").addText("Text Goes Here!", styles);
          sym.getVariable("textAnimation").animate("slideLeftIn");
      //Edge binding end
      Symbol.bindTriggerAction(compId, symbolName, "Default Timeline", 2000, function(sym, e) {
         // insert code here
          sym.getVariable("textAnimation").animate("slideRightOut");
      //Edge binding end
      Symbol.bindTriggerAction(compId, symbolName, "Default Timeline", 4000, function(sym, e) {
         // insert code here
        var styles = {
             "font-family": "Eurostyles, Arial"
          sym.getVariable("textAnimation").addText("Some more text!", styles);
          sym.getVariable("textAnimation").animate("zoomBigIn");
      //Edge binding end
      Symbol.bindTriggerAction(compId, symbolName, "Default Timeline", 6000, function(sym, e) {
         // insert code here
          sym.getVariable("textAnimation").animate("zoomBigOut");
      //Edge binding end
      Symbol.bindTriggerAction(compId, symbolName, "Default Timeline", 8000, function(sym, e) {
         // insert code here
          sym.play(0);
      //Edge binding end
   })("stage");
   //Edge symbol end:'stage'
   //=========================================================
   //Edge symbol: 'text_animation'
   (function(symbolName) {
   })("text_animation");
   //Edge symbol end:'text_animation'
})(jQuery, AdobeEdge, "EDGE-26783744");

After Effects CS6 will not work on OS 10.9.4

Error:
You can't use this version of the application with this version of OS X.

Install the updates:
http://adobe.ly/AE_CC_1201_Mavericks

After Effects CS6 not working on yosemite

I upgraded my MAC OS from Mavericks to Yosemite and After Effects suddenly does not work. It says that the version cannot be used in the current OS X version. I have searched and did all the suggested solution available on the internet. I have reinstalled and installed after effects CS 6 and downloaded the updates (11.0.4). But it says that the update is not applicable for the product. What is odd though, the other CS6 programs are working properly other than After Effects. What should I do? any help??

Try fixing permissions problem that impedes start of Adobe applications
Then try updating within another Adobe app.

Slow/Fast/Reverse DOES NOT WORK

I have read other posts on this issue. When I attempt to apply this effect, it does not work. This is a new project in iMovie HD 6. Clips will not take this effect. It shows up in the preview fine but will not apply. Below is what I sent Apple. Any and all help (solutions) appreciated. Is anyone else using this effect successfully in HD 6?
I select a clip (it is selected), click on the Editing tab, then click on the Video FX tab, and then select the fast/slow/reverse option. I am correctly using the slider to slow the clip down just one tick past the default position. The effect shows up in preview but will not apply. The red progress line (that indicates the effect is being rendered) shows up for about a tenth of a second and then stops. I am using the latest version of iMovie (6.0.3). I have a Dual 2 Ghz G5 Tower. I have 1.5 GB of ram. I am using OSX 10.4 8. All my software is up to date.
The camera I am using is a Sony VX2000. Never had a problem with iMovie 4 and 5. I have two internal drives. I have an external drive that is for backups only. All three are Mac OSX Extended (Journaled) format. The drive i am capturing to is the original drive that came with with my computer. It is 160 GB. 147 GB is free. I keep this drive clean and only for current projects.
I did have some plugins installed for iMovie from GeeThree. They are the updated versions for Intel and PowerPC running OSX 10.4.8. Again, all software is up to date. I did remove those plugins from the plugin folder. Also, I have ran Disk Utility and permissions are fine. I have not removed the preference files yet (plist) because I wasn't sure which ones to remove.
A third thing I did was to create a new project (after unstalling the plugins, restarting, using Disk Utility), reimport some footage and see if the slow/fast/reverse effect would work then. It did not work. I then saved all my current work and saved to tape. I NEED THIS EFFECT TO WORK! Please who can solve my problem? Dinner is on me!! LOL!
Mac OS X (10.4.8)

In addition to Karsten's great advice...
Read Karl Petersen's post in this discussion for the common reasons the video FX don't work:
http://discussions.apple.com/message.jspa?messageID=1852869#1852869
:)Sue

Surrond effects (DTS/DD) not working

Similar Messages

Maybe you are looking for