Surround sound doesnt work with 7.1.1

Ever since I upgraded to 7.1.1 surround sound will not work only plays in front 2 speakers. Quick time preferences have channels set to 5.1....control panel sounds has speakers set to 5.1 ....all other applications (media player etc.) can use all speakers...its only iTunes that has the issue.
Really frustrating anyone have any ideas??
7.1.1 Windows XP

Hey Todd,
The four vis that you listed are a part of the traditional DAQ driver. It looks like you don't have that driver installed or that you don't have support installed. One quick way to check and see if you have the traditional DAQ driver installed is to go to LabVIEW, then pull up the functions palette. Go to NI Measurements>>Data Acquisition. If you don't have the "data acquisition" option, then either support or the driver itself isn't installed. The next step is to go to the Measurement and Automation Explorer (Start>>Programs>>National Instruments>> Measurement & Automation). On the left hand side of the window, you'll see a directory structure. Under My system, you'll see a "software" directory. Expand it. Look for something called "Traditional DAQ". If you don't have it, then you don't have the traditional DAQ driver installed and that's the problem. To install the driver go to the following web site http://search.ni.com/nisearch/nisearchservlet?nistype=default&filter=+%2BProductLine%3A41+%2BDownloa.... I'm assuming you're using WinXP. Download and install the driver. If you have hardware physically installed in the computer when you install the driver, that adds another step. You'll have to perform a repair of the driver once it's installed. You can do this by going to Start>>Settings>>Control Panel>>Add Remove Programs>>NI Software. Then select change. That should create a list of currently installed software. Select "NI-DAQmx" and then hit the repair button.
One last note. When installing the driver, make sure you select to install support for LabVIEW. You should now see the vis that you were missing in LabVIEW and therefore the program should now run.
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

Similar Messages

How do i get my surround sound to work with my laptop while using a hdmi cable for the video

I have a Sony surround sound system hooked up that works great. My X-Box 360 works with it and I can get my HP G60 to play audio files through the surround sound system with a red and white audio jack plugged into the back of my surround sound receiver, the red and white audio cord goes to a 3.5mm headphone jack that i plug into the headphone plug on the front of my computer. The problem occurs when I hook my HDMI cable into my computer and connect it to my Samsung Flat screen, the HDMI sound takes over and wont allow the sound to go through the headphone jack. My tv does not have any audio output plugs, and my suround sound reciever doesnt have an HDMI input. Is there a setting on the computer that will allow me to over ride the HDMI sound and direct the sound through the head phones? or is there an app or tool that will allow my laptop to recognize my suround sound system plugged into my laptop? I have been to best buy, walmart, radio shack and even my local car audio store to ask about this issue and everyone has a different solution, and so far none of them have worked???????? sincerley frustrated! please help!?!?!?!?!?!?!?!?

Hello JaeRoc48,
I understand that the sound is not working.
Go to start.
Type Sound.
Select sound.
Select speakers as default.
Click OK.
Let me know how everything goes.

How to get Surround Sound to work With Itunes 7 and Stop Skipping

A common problem for surround sound with itunes 7 appears to come from Creative sound cards. The way to fix this problem is to right click on the volume icon in the taskbar and open the EAX Console. Open the CMSS 3D tab and check the box that says Enable CMSS 3D and set both CMSS and CMSS2 to 0% in the stereo focus slider. It should work. Remember to have the volume slider in itunes at 100%.
If that doesn't work then open the quicktime preferences in the controlpanel/quicktime. Then go to the audio tab, uncheck the safe mode box. Set the rate to 64 kHz and the size to 16 bit. Then set the channels to 5.1
This should all make it work, after hours of struggling i've found these successful settings and am loving it!
For those of you who have sound skipping during transitions----
Go to the preferences of Itunes and go to the Playback tab, disable the crossfading between songs and you should play skip free!!!!

bump

MUSIC VIDEO -SURROUND SOUND NOT WORKING WITH 7.0

My surround sound 5.1 does not work with downloaded music video playblack on windows iTunes 7.0. It used to work before I updated to 7.0. At first, my surround sound would not work with 7.0 for any iTunes songs, not just downloaded videos. However, that was corrected with the version 7.0.1 update. However, surround sound still does not work on videos I am trying to play back. This includes music videos that I purchesed both before and after downloading iTunes update 7.0.1. Has anyone got any suggestions for how to fix this problem so that my surround sound 5.1 will work on playback of the music videos?

I have an Airport Express that is linked to my TV. It is interfaced to my Denon AVR. To get surround sound I had to just select the correct output option via the Denon. Then the speakers set up for SS would work.
MJ

Is-32-900-Tvbu - Getting the surround sound to work with this TV

Can anybody help??
We have just bought a Is-32-900-Tvbu ISIS TV from Best Buy but we have tried wiring up our speakers and no sound is coming out of them. I dont know much about Sound Sytems so bare with me, but there is nowhere in the back of the TV to connect the speakers directly so we had the speakers conencted to a Stereo and then a lead from the Stereo to the TV (the one with the red and white connections). This worked fine on our old TV (one of the ancient bulky things) but doesnt seem to work now. The speakers work fine so its not them.
I have tried playing around with the Audio settings on the TV but nothing i do seems to make any difference.
Do you think this is a fault or am i doing something wrong??
Thanks for your help

With that TV, I believe the only audio output that it gives you is through the SCART connection. I might be wrong though. Does your stereo have a SCART connection? I've only worked with this connection once so I'm not completely farmilair with it but, I think this would be your best conneciton for audio. If your Stereo doesn't have this connection there are addaptors you can get. It's called is a Multi-AV SCART adaptor with input/output signal switch..... I think.

I can not get 3D surround sound to work with my X-Fi and headhones please he

I have an X-Fi Xtrememusic soundcard and I have been unable to get possitional sound working consistantly with two sets of stereo headphones. I have the latest drivers installed and have creative audio console set to: headphones, game mode, CMSS 3D and I still have no possitional sound at all. Noises seem to come from above my head I can't tell right from left or forward from backward in other words I am completely lost as to were sounds are coming from in games. I used to be able to get possistional sound to function by changing headphones in the creative audio console to 2. or 4. speakers.
If I set the mode to 5. or higher the sounds in games (footsteps, weapons fire) would become heavily muted and hard to hear while I would gain better positional sound for other players and now this does not work at all. I have also tried disabling sync to windows control panel and changing its sound options and there have been no beneifts from doing so. In settings other then stereo headphones no sound was produced at all while others stopped sound coming from one of my headphone speakers. I am at a total loss I can not think of anything thing else to fiddle with.
My system specs: Athlon 64 4000+ San Diego, ASUS A8N-E mobo, 2GB DDR400 2.5CAS Buffalo ram, EVGA 7800GT CO, X-Fi Xtrememusic. No popping or crackling sound at least. Thank you you reading this.



Message Edited by Blah-and-Feh on 04-5-2006 :50 PM

Hay everyone thanks for the advise but i was finally told by one of the support personnel that I actually need the dri've bay insert that comes with the fidelity in order to get the cmss 3d to work with the headphones.
I only purchased the extreme gamer not the extreme gamer fidelity and that is why i cant get the cmss 3d to work but it still advertises on the box that you can use the cmss 3d and get that feature. :angry:? Should have done homework but i was out Christmas shopping and i went off of what the box advertised. This is very unusual for me to shop compulsi'vely. The funny thing is that everything else on the box that is advertised such as the increase of the CPU and the EAX HD features are able to be used. Im very upset about this because I particularly bought this card for the cmss 3d. I really don't know if i will ever recommend another Creative Product to any of the people i do computer repair or gamer builds for, unless this gets resolved and the only way to resolve this is to get the cmss 3D to work. By the way I did do a full reinstall even with clean boot so that isn't the problem. I'm really upset and ready to return this product to Best Buy unless this can be resolved. Any admin that comes across this please send me any ways of getting a hold of anyone that can help. Tks and hope yall had a wonderful Thanksgiving.
Creatively toastedMessage Edited by toast on -24-200608:48 PM

Soundblaster X-Fi Surround sound not working!!!! HELP!!!!

9Soundblaster X-Fi Surround sound not working!!!! HELP!
!!! officially i hate creative to the what was supposed to be simple registration which in itself annoyed me to now the speakers i have been using for a longggg time for the past 4 days has been bothering me..
Using a Creative Soundblaster X-fi ?sound card with a 7. surround sound speaker set-up and windows vista ultimate (32bit) the sound refuses to come out of all the speakers during the channel test it sometimes picks up certain speakers but never all of them and the sound is pretty much coming out of the left speaker only i've tried uninstalling all the drivers installing every driver i can find together with the console launchers i've changed the config settings in windows itself which doesnt help uninstalled all codecs bought another x-fi card (i was getting frustrated) still nothing the only thing i havent done is re-install windows which i refuse to do because of some creative defect!
I hope someone has a solution or any advice would help i've also used dri've cleaner and sweeper to clear all data from the registry etc rebooted etc etc etc still no luck....
Sort it out creative!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!

**beep** !! a response would be GREAT............
Admin Notes: I understand that you are frustrated but cursing & swearing is not allowed here. If you need help from customer support, you can contact them through email. Please abide to the rules if you want to participate in this forum.
Message Edited by KokChoy-CL on 02-7-2009 09:50 [email protected]

Cmss 3d doesnt work with dolby digital live pack

0cmss 3d doesnt work with dolby digital li've pack4 From the page of Dobly Digital Li've pack
"Stereo content (MP3, WMA, CD audio or games) that is transformed into 5. surround sound using Creative CMSS-3D or DTS Neo:PC can also benefit from this encoding scheme that will further enhance the entertainment value of your Sound Blaster X-Fi."
with that said, i bought the pack that has both DDL and DTS Interacti've. but while playing music my reciever only gets front left and right channels. No sound comes from the center or rear channels. This is with CMSS 3D on. With analog all 5 speakers work. Before installing this pack, my reciever got PCM input from the optical line. Thus only the front channels working. now with this pack the speaker recognises that the signal is Dolby or DTS yet, only the front channels work. in short there is no difference with this pack.
could someone please explain to me how to get the whole 5. working with Dolby or DTS
thank you
Sound Blaster X-Fi Platinum, Driver 2.8.003
Windows 7 x64 Build 700

thank you for the promp reply
the problem was with the reciever. just a change in setting was all it took
but now i have anoter problem
how do i bypass dolby and dts signals from movies to my reciever
before i simply had to set spdif out as default sound device and set ac3filter to spdif passthru
now the driver panel tells me that SPDIFOut will be exclusvely be used by DTS Interactiv. it doesnt pass the signal through from Media player classic or powerdvd.
am i expected to turn off DTS Interacti've or DDL when watching a movie and needing to pass on the signal?

5.1 Surround Sound in VLC with OSS4

I don't seem to get 5.1 surround sound in vlc with oss4. The audio device's available in vlc are stereo and mono only even when playing 5.1 surround sound compatible media.
Is this issue still unresolved?

ok.... strap your-self in Freddie
with a surround panner, bleed-over (on to other channels) can be ugly as i have found surround panners are anything BUT precise (perhaps accurate, as you say but NOT precise). Oh don't forget that sub channel. The bus trick really helps out here with limiting and compression..blahblahblah.. Automation with panning (on the main track) and bussing (i know this sounds goof-ball) making dup tracks for different panning functions (like sweeping aircraft sound spinning around the sweat-spot spectrum) leverages standard (old-skool) automation 'thinking' rather then the (new-skool) surround panner thinking... plus i'm still waiting for a low cost HUI style mixer with REAL tactical 3d surround panning joysticks so i can truly leave the stereo world. the mouse and a surround panner is the 'lame' some times.
But, yah, i do mix in both worlds..5.1 panners and my uber-hax0r bus panners. To tell the truth, when i'm in LP7 i still have use my bus trick in conjunction with 5.1 panners. Kinda too bad however that logic (Pro and Express) don't have the kewl mono/stereo into 5.1 effects of Digital Performer... oh well... good luck all you AC-3'ers out there!.. i'm going back to work...[beep]

I start running a java program and when i switch users the sound doesnt work

When I start running a java program or leave a game running and i switch users the sound doesnt work. I have been searching around the web and nobody seems to have an answer. This just recently started to happen. Please if anyone has any ideas that would be much appreciated and the problem is my computer its almost brand new. And my computer is completely up to date.

Sony Mobile team has a separate community which can be found here.
If my post answers your question, please click on "Accept as Solution"

I book doesnt work with power cord only

Hello. I was just using my ibook g4 and shut it down. When i tried to turn it back on it worked for about 5 minutes then it shut off. I tried taking out the battery and holding down the power button for 5 seconds among other things. I gave up and borrowed a friends battery, he has the same model as me and that battery doesnt work either. I tried just using the power cord only and that doesnt work either. Do i need to take it in to a professional? I've tried just about everything.

Hey Caesar and Welcome to Apple Discussions,
So your header reads:
"i book doesnt work with power cord only "
Is that right? Will it run only on the battery?
If so this is from the manual:
"The computer runs with battery, but not with the power adapter plugged into
wall outlet
1. Try known-good power outlet.
2. Try known-good power adapter and power cord.
Note:
Verify that power adapter connector glows amber or green. If the power
adapter light is green, turn over the computer and press the battery button. The
battery lights should glow green and stay on if the power adapter is operating
correctly.
3. Reset the power manager by pressing the key combination Control-Option-Shiftpower.
Warning: Make sure you do not hold down the "fn" key when resetting the
power manager.
Warning: Resetting the power manager means you will also need to reset the
date and time (using the Date & Time control panel).
4. Replace DC board.
5. Replace logic board."
and it would help to know exactly which iBook you have but this is pretty generic.
Richard

Why is the fb video call doesnt work with macbook?

why is the fb video call doesnt work with macbook?

Hi
Just to correct GerdW - the vis of a polymorphic vi do not have to have the same output.
Have a look at the vis I attached. I just pass a dbl to a polymorphic vi and get a dbl in one vi and a string in the other.
The real problem is that the vi has to be set to the necessary type. If there are different inputs you just can wire them to the polymorphic vi, but this does not work with the outputs, so you have to set the type.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Polymorph.zip ‏14 KB

HP 4330s SRS Premium Sound not working with External Speakers

And this is my second topic and rant!
The SRS Premium sound driver doesn't work with USB Speakers.
It doesn't work with Bluetooth speakers either!
In other words it only works with the Laptop speakers.
ARE YOU KIDDING ME!
SRS Premium sound for Deeper Bass and Clear sound enhancement bla bla bla now in you HP Laptop
but ONLY with your LAPTOP SPEAKERS!
ARE YOU KIDDING ME!
DEEP BASS on these cell phone speakers!!! Really???
Why doesn't the SRS Premium Sound driver work with external speakers!
I believe I have used SRS Sandbox before and ALL THE SOUND was directed to that driver and it worked with everything!
WHY DOESN'T YOUR HP DRIVER WORK WITH EXTERNAL SPEAKERS!
Is everyone in HP a bloody RETARD?
FIX YOUR DRIVERS!
End of rant!

Oh BTW {Content Removed: rant} http://www.srslabs.com/landing.aspx?id=693#23
23. Will the SRS Audio Sandbox work with my USB speakers or Bluetooth speakers?
Yes, the current version, 1.6.6.0 will work. If you have a previous version that is not working with these speakers, please upgrade to this version.
Do you have anything else to share with me {Content Removed: rant}

Sound quit working with game apps?

Sound quit working with my game apps and email.
Radio, facetime & music work fine.
Has anyone had this issue?
I did not change any settings.
It worked fine yesterday and today no sound.

If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Seagate 1.5TB doesnt work with mac

hi, i have a seagate external hard drive 1.5 TB, i generally use it for my windows laptop. now i bought a mac and it doesnt work with my mac. Am i doing some thing wrong..?

Are you planning on using the drive with Windows? If no, then use Disk Utility in Applications/Utilities to reformat the drive. Formatting erases contents on a drive. Copy the data to another source before formatting.
Format the external drive as Mac OS Extended (Journaled) - Partition Map Scheme: GUID
Select Drive (top name) then click on Erase tab.
Under Format select Mac OS Extended (Journaled)
This should format as GUID when erasing but sometimes you need to click on an Advanced tab and select GUID.
If you do plan on using the drive with Windows machine, format on Windows machine as exFAT.

Surround sound doesnt work with 7.1.1

Similar Messages

Maybe you are looking for