Surround Sound through optical on MacBook Pro 2011

So I've got this brand new MacBook Pro connected to my 5.1 surround sound home theatre system through optical, and I can only seem to get stereo sound out of it. I go through the Audio MIDI Setup and it always only shows 2 speakers and when I open up Left 4 Dead 2 it also only shows 2 speakers, any ideas on how I can get the surround sound working, I've been searching for awhile and haven't found anything, thanks?

Stereo has 2 channels, 5.1 surround sound has six channels total.
The Mac passes 5.1 through the optical cable/port.
The audio has to have a 5.1 encoding of some sort, Dolby, Logic etc.,
Your receiver has to be set to decode the 5.1 format being sent to it.
You can test this with a DVD that has extra sound capabilities in the audio menu, then match the encoding on the receiver.
Some 3D games provide surround sound on a Mac, but usually it's to a PC sound card that handles the processing. Since Mac doesn't do that, it just passes the surround sound through, the surround sound must be in a encoding format your receiver can understand.
Some good receivers can take Stereo 2 channel and separate out some of the frequencies and send them to the appropriate speaker, like the sub woofer and mid range. Then take the left and right channels and duplicate them for the front and rear left and right channels to fill a room with sound. However this isn't true surround sound as you won't hear objects moving up behind you or flying past over your head like in a good movie or video game with true surround sound abilities.
Your lucky I was here, not many people mess with surround sound on a Mac, or really don't even know it's there.
But it's really worth the effort, even iTunes music sounds great. A iPod sounds like crap in comparison.

Similar Messages

Sound through HDMI on MacBook Pro not working

I've a MacBook Pro [Retina Display] (Mid 2012) with HDMI Output. I've tried to connect my Samsung PDP to it, and the Display is detected successfully. No problems in using the display in Mirror or Extended view. However there is no sound output on the Display. I've also tried to connect my Mac to Sony AV Receiver -- To my Samsung Display,the display is detected, but still no sound on AV Receiver.
I've than checked the sound preferences and it says that "The Selected device has no output controls". I've also tried to match the sound output Hz to input and tried all combinations, doesn't work at all. The Volume icon is greyed out as soon as I select the Output to Samsung. I'm now running out of thoughts.
My goal is to be able to Play sound on either the Sony AV receiver or Samsung PDP, either way will work for me.
Any help would be appreciated.
thanks
Rishi.

Some time ago I had this problem too. I had another Macbook with a broken main board, so I decided to wrack the connector. This showed clearly how the switch inside the connector works. It is a "normal on" switch, and it switches to off if a plug is plugged in. Then the software senses the connection to determine if this is a audio plug (metal) or a a optical connector (plastic). What happens, is that some dirt sticks on the switch, so the computer "thinks" it has a connector plugged in. Since it senses no connection, it switches to optical. The solution is clearly to clean the switch. That can be done, sometimes it might work from the outside, with the toothpick, compressed air, or whatever, but that didn't work for me. Best is to open up your mac, removing the keyboard, etc. Follow the instruction here: http://www.ifixit.com/Guide/Repair/MacBook-Core-Duo-PRAM-Battery/297/1, but not all the way! Don't remove the main board, or the cpu-cooler. Go so far that you can reach the metal strip on top of the connectors. This strip should be bend so that the connector is reachable. See first photo.The audio connector is inside a metal box. That box is for radio wave interference and for strength. So you can just wrack it open with pincers and a screw driver. Just watch out you don't drop any metal parts on the main board! When the box is removed, remove the plastic top. Now it is quite simple to clean the switch. See photo 2, the arrow is pointing to the switch. Don't be confused by the photo, you shouldn't remove the connector from the main board! On the left you see the wracked metal box. I used compressed air to clean the switch. When done (just connect the keyboard and start your mac to test), put back the plastic top, put some tape on it to keep it together and if you don't use brute force injecting a connector, you will be fine...
Hope this helps!

5.1 Surround Sound Altec Lansing with Macbook Pro

I am sure this question has been asked many times before, but I couldn't find an answer. I have 5.1 Dolby Digital Surround Sound Altec Lansing speakers that came with my Dell Desktop from several years ago, and I recently switched over to mac by purchasing a macbook pro. I would like to know what the best way, if any, would be to get the speakers working with my macbook.
The 5 surround sound speakers plug into the back of the subwoofer, and the subwoofer has 3 cables (I'm guessing right/left/subwoofer) that connect to the back of the desktop. Are there any adapters that would allow me to use them with my macbook pro? Is there any way to just stream whatever sound I want to those speakers? Is it even possible? Any help would be appreciated. Thanks!

Is there a way to identify which computer outputs support 5.1 sound? It is a media center PC, but I can't find that information anywhere.

Can i connect my cintiq 12wx to my Macbook pro 2011 through the thunderbolt using the mini display port to vga adaptor?

I just bought my cintiq 12wx and was wonderding if i can connect it to my macbook pro 2011 through the thurderbolt using a mini displayport to vga adaptor? Please help!

Yes, it should work with a mini-displayport to VGA adapter. Since a 12wx also can take DVI you could use a mini-displayport to DVI adapter instead. Why go analog when you can keep it in digital!
I guess the usb is for the pen.

Can't have sound on my TV when I connect it on my MacBook Pro 2011, with the HDMI adaptor

Can't have sound on my TV when I connect it on my MacBook Pro 2011, with the HDMI adaptor.
On SOUND preferences, I don't have the option for chosing HDMI on the OUTPUT sound.

Do you have another HDMI port that you can switch to on the TV? Is the tv source on the matching HDMI port with the volume up? After checking those try the following:
PRAM Reset: http://docs.info.apple.com/article.html?artnum=2238
SMC Reset: http://support.apple.com/kb/HT3964

How do I permanently erase my entire MacBook Pro 2011?

I am giving my Mac to somebody and don't want any recoverable traces of me to be on my computer. It's a MacBook Pro 2011 13" but it has Yosemite 10.10.1

Before Selling or Giving Away Your Pre-Lion Mac
Deauthorize your computer from iTunes, if applicable.
Back up your data using Time Machine or other backup methods for OS X Mavericks or Mountain Lion.
If you use Find My Mac or other iCloud features on this Mac, complete these steps:
Back up your iCloud content.
Choose Apple Menu () > System Preferences, then click iCloud.
Deselect the Find My Mac checkbox.
Sign out of iCloud. When you sign out of iCloud, you're asked whether you want to remove iCloud data from your Mac. Removing iCloud data in this way makes sure that the data isn't also removed from any of your other devices that are using the same iCloud account.
If you're using OS X Mountain Lion v10.8 or later, sign out of iMessage:
In the Messages app, choose Preferences > Accounts
Select your iMessage account, then click Sign Out.
5. Follow these steps for installing the original version of OS that came with the computer.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After Disk Utility loads select the hard drive entry from the left side list (mfgr.'s ID and
         drive size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. If you are planning to sell or give your computer away, then do the following:
        After you reformat your hard drive and reinstall OS X, the computer restarts to a
        Welcome screen and asks you to choose a country or region. If you want to leave
        the Mac in an out-of-box state, don't continue with the setup of your system. Instead,
        press Command-Q to shut down the Mac. When the new owner turns on the Mac,
        the Setup Assistant will guide them through the setup process.
Note: Portions of the above have been copied from What to do before selling or giving away your Mac - Apple Support.

Macbook pro 2011 model freezes after software update

my macbook pro 2011 model freezes and does a continuous alarm sound after a software update. i have taken it in twice, theyve changed the hard disk, they have done all tests but it still happens.

Run through the list of fixes here
Step by Step to fix your Mac

When installing Windows 8 from a USB to my MacBook Pro 2011 only EFI Boot option shows, there is no normal Windows Boot option

Hello. I want to install Windows 8 on my MacBook Pro 2011 form a USB stick. And when I restart, holding Alt. There only option is EFI Boot, which doesn't work. And there is no usual Windows option. I have tried instaling using an external optical drive, but it doesn't work. And I don't have an internal drive because it has been replaced with a HDD. Please help.

try kunu's solution here and report back
https://discussions.apple.com/thread/5105056?tstart=0

My macbook pro 2011 i7 2.66 - 10.6.8 freeze....

my macbook pro 2011 i7 2.66 - 10.6.8 freeze....

Make a run through this list and get back with me here
Step by Step to fix your Mac

Can i use hdd + SSD in my macbook pro 2011 ?

can i use hdd + SSD in my macbook pro 2011 ?
cause i already had 750GB and now i am palnnin gto buy SSD to install my system on it and keep the 750Gb as a storge can i ?

Go see Bmer here
http://macosg.com/
He's knowledgable about exactly what your wanting to do.
Some drawbacks, you can't boot from any OS (OS X or Windows) installer disk from a external optical drive the Superdrive goes into when you install the kit.

Macbook pro 2011 early cannot find right resolution for external display and keeps flickering

I have a macbook pro 2011 early running 10.9, and a LG FLATRON W2242T external screen. Also, I have a VGA to miniport from Apple and a VGA to HDMI, plus a HDMI to miniport(from Apple). By just connect with VGA to miniport to my MBP, it just flickers few times and stops detecting. But by connect VGA to HDMI converter and HDMI to miniport to my MBP, it keeps flickering, a non-stop flickering. The external screen always shows no signal. However, if I connect my MBP to my TV through HDMI to miniport, it works fine. But connecting the VGA port to my TV, it gets the same problem. I have tried clear my PRAM many times, and it gets the same result. Does anyone have the same problem? Thanks

Macbook Pro 15" Early 2011 external display won't work as it used while Snow Leopard, I hate you Lion so far. I cannot even Go Back!
Did you bother to backup or clone your SL installation before dumping it?

Display issue - My macbook pro 2011 detects my display but does not display an image

Hi, I am having a problem connecting my MacBook Pro (2011) to my HP 2511x display. I used the display all morning with my mbp connected and closed. When I came back, after the computer went to sleep, I cannot get any image on the display. The computer detects the display but no image appears.
I have tried-
Installing the latest firmware and software updates
restarting both the computer and monitor
trying all of the possible display arrangements and settings for resolution and refresh rates
Also I am connected using a minidisplay to DVI adaptor in the thunderbolt port.
Any and all suggestions appreciated.
thanks.

Hello Aminetti,
It sounds like your computer goes to sleep, and will not wake up, so you must manually restart your computer. I recommend the troubleshooting in the following article:
OS X: When your Mac doesn't sleep or wake
http://support.apple.com/kb/TS5357
Reset SMC
Reset NVRAM/PRAM
Test with external devices disconnected
Try Safe Mode
Try another user account
Thank you for using Apple Support Communities.
All the best,
Sterling

Macbook Pro (2011 Model) suddenly does not boot from SSD in main bay

I have been using Macbook pro 2011 and Samsung SSD (256GB) for about a year.
All of sudden, the computer will not from SSD from the main bay, but it will boot from the optical bay.
I have tried an Intel SSD 120gb which came with the computer, but it does not work either.
However, it will boot from the regualr hard drive from the main bay.
I have read somewhere that it could be due to the hard drive flex cable.
Has anyone experienced a similar problem?

It may very well be a problem with the SATA cable... for some reason (and I don't know why, but...) SSDs seem more prone in 'detecting' a faulty SATA cable than a standard hard drive. Where a hard drive will boot, an SSD will not.
I would advise purchasing a new SATA cable - from ifixit.com or powerbookmedic.com - and replacing the cable. That (normally) clears up the problem.
Clinton

Does anyone know of a mini sterio with surround sound and optical input in Mac Mini form factor?

Does anyone know of a mini sterio with surround sound and optical input in Mac Mini form factor?
I use a Mini as the family media center and would like to have 5.1 or 7.1 sound for films but don't want a huge piece of eletronic equipment (I have one of those, but it isn't hooked up because it doesn't fit on the bookshelf). Years ago I used a PC and still use the Creative Audigy speaker system (Jimmy rigged to the Mini) that I ran from the PC. The Audigy PCI sound card obviously doesn't work on the Mini, so I just have two chanel plus sub. That has been fine since I switched to the Mini in 2007, but am updating to a new Mini in the summer and would like to upgrade my sound as well.
I also wouldn't be opposed to a USB soundcard that can drive the speakers. In fact, my wife would prefer smaller and less visible, ergo USB card hidden in the back.
Suggestions?

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

My Macbook pro 2011 suddenly has a really slow bootup. What can I do?

My Macbook pro 2011 suddenly has a really slow bootup. What can I do? I did install a cannon printer upgrade and security upgrade. Not sure if it was something to do with that. Also I tried the disk utility repair and didn't improve anything. I also reset PRAM and SMC.

1. Try booting in e Verbose mode - press and hold [cmd] + [v] keys just right after the boot chord sounds till you get a black screen and white letters.
if there are some delays in the boot process - you should see where the system is stuck.
this mode is not permanent - the next [re-] boot will be normal.
2. repair permissions. disk utility does fine. Disk Warrior is better.
sometimes after half done updates (it may happen though should not) there are items that are "belonging to someone else"
3. try cache cleaner (or there are some other utilities as well - I just like SlCC more) http://www.northernsoftworks.com/snowleopardcachecleaner.html - it's shareware though the basic functionality is free for you to use.
Try caches -> deep cleaning (please read the developers site what it does) and select checkmark at all options - reply yes to the requests and after a reboot the next reboot should be as it is intended.
p.s be sure you do have backup

Surround Sound through optical on MacBook Pro 2011

Similar Messages

Maybe you are looking for