Survey Builder : Survey question not populate with questionnaire link.

Dear Friends
i have created application using SURVEY BUILDER Package application .
i have two application with same schema .one is my created application :100 and second is Survey Builder pacaskge application 105 ,with no chamge in survey builder application.
My Questionnaire Link is created but when i put this link into address bar then there is no rection,no question set open in that window.
Questionnaire Link
http://178.110.201.231:7777/apex/f?p=100:Q::AAL8:::code:AQDQEIWJAUWVCGGZ
this is my application question link.
But if i change application no 100 with survey builder application 105 and submit then survey question open .
I am confuse where is problem why survey question does not populate with my application 100.
Please help.
Thanks

Did you get your link from "Manage Respondents"?
I usually get a link like
http://apex.oracle.com/pls/apex/f?p=67351:Q::ABCD::::
(this is an example that doesn't point to a real live survey).
http://178.110.201.231:7777/apex/f?p=105:Q::AAL8:::code:AQDQEIWJAUWVCGGZ
did not work for me, maybe because of your specific IP:port in the URL. Sometimes the colons ::: create a problem when copying/pasting to email, so I use a service such as is.gd to transform it into a simpler URL like
http://is.gd/B7hxIl
Does that help?
Ben

Similar Messages

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

Ios 8 not working with chevy link

I upgraded my ipad 3 and iPhone 4S to IOS 8. After the upgrade neither device works correctly in my Chevrolet vehicle via Chevy Link. Both devices worked perfectly with Chevy Link when I was using IOS7.
When I plug in my ipad or Iphone it will connect and play songs but as soon as I select a playlist it displays an error message in my vehicle information screen. When you click "OK" to clear the message the device is immediately disconnected from Chevy link and the radio goes back to XM.
Any suggestions how to remedy the situation? As I said before, all of my Apple devices worked perfectly under IOS7.

After having the same problem with my 2013 Chevy Equinox, I did a factory reset of my iPhone 5s and re-installed IOS 8 from scratch.
I used my iTunes backup to restore my apps, contacts, photo ..etc
Since I did that, I was able to connect my phone via bluetooth to my Chevy Equinox, make phone calls, listen to music ..etc
So far so good. I made about 10 calls, stopped the car, restarted the car and reconnected the phone and it worked.
I wonder if the upgrade from IOS 7 to IOS 8 is not working properly and causing problems with Bluetooth. It seems that a full install after a factory reset fixed my problem.
Hopefully, it is the end of the nightmare. Good luck.

Flash Builder Design Preview Not Working With Catalyst Objects On Stage

Hi there,
I'm working with a flash catalyst component from a flex project library, and it will not preview in desing mode. Anyone ever run into this? It seems that it may be a memory issue as the custom components themselves will preview, but now a bunch of custom components all displayed in a view.
Any insight would be greatly appreciated! For now I'm back to guessing x & y coords...

Going to answer my own thread here. This issue doesn't seem to be with Flash Builder, I think the issue lies in the browser not being able to register the button modes, namely Firefox 4. I've seen it happen in other browsers too, like Chrome, where the fix is to embed the swf as param.wmode = "window". Hope this helps someone out.

Apps built with Flex Builder 2 - 3 not compatible with new Flash Players and/or new browsers, FB4 OK

My applications built with Flex Builder 2 and 3 do not start in new versions of Flash Player and/or new browsers when run remotely. I have not been able to test all combinations of FP and browser versions but there is no problem with applications built with Flash Builder 4. Does anyone have info on this?

Hi Dimitar,
Did you close all the browsers (and applications which use
Flash Player) when you install Flex Builder 3 Beta 3 or Flash
Player? You can try manually installing it from <FB install
location>/player/ directory. Here're some
installation/unintallation instructions of Flash Player:
http://labs.adobe.com/wiki/index.php/Flex_3:Release_Notes#Installing_Flex_SDK_3_Beta_3
thanks,
Sharon

CC Desktop app does not populate with apps, just an empty window. I have reinstalled with no luck.

Unable to download any CC content since the CC desktop app does not show any available. The app worked for a while and I did download some programs but now it isn't working at all. Is there a fix for this or another way to download apps, specifically Encore?

Hi there, are you still experiencing this problem with the crossword app? From your post I'm assuming that it is an intermittent problem and the app prints OK some days but not on others? Is that correct?
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Installed the Creative Cloud for the desktop, but the window will not "populate" with any information at all.

creative cloud problem - YouTube
As I asked in the very short video: HELP

Car-son please see Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html for information on how to resolve your current error.

Deadline Panic--Encore Subtitles Do Not Burn with DL link Project

I have a big SD DV project that I DL ed to Encore where I did the usual Menu and Chapter Work, and this time I added subtitles. They are made by the book, per the docs, as shown in the tutorials, and they preview perfectly from the Encore Monitor, as do all the other Encore parts. The problem is that the subtitles not burn to the DVD--nada, nothing, zilch, zip, nicht. Everything else burns from Encore CS4 and everything else works perfectly.
I could have done the subtitles in PrCS4, but there were a lot and that operation simply goes a lot faster in Encore. But, the choice to do it there may have been a major mistake. However, I would like to salvage this if I can. I simply cannot find where I have missed any steps! It seems to me that if it previews in the Encore Monitor, it ought to burn. I have only one subtitle track and one audio track, which ought to be in compliance with the DVD standard.
I know this is perhaps not strictly the right forum, though it is related in essence because of the DL connectivity concept. I have, of course, posed the question in the Encore Subtitles forum, but don't expect any response from there in anything short of a week. Just not many posts ever in that forum. And I know that a lot of users here also burn their projects with Encore. Can anyone corroborate this as a bug, or tell me what might possibly be wrong?
Thanks very much.

Check your topic in the Encore forum.
-Jeff

Q10 will not connect with BB Link via WiFi (updated software)

Hello! I have not been able to get my Q10 to connect to BB Link via WiFi since the lastest OS update. Before, it was not an issue. I can connect via USB without problems. I have uninstalled/reinstalled BB Link on my computer and it does not work even though both the PC and the device are connected to the same WiFi network. The checkbox in BB Link to allow WiFi connections is checked. It is not the end because I can at least connect via USB, but wireless was so convenient. Can anyone help? Suggestions? Thanks!

OK, just messing around with this more tonight. I was able to finally just get the iPod touch to connect to my phone via WIFI.
My question or concern still remains about the Bluetooth connection.,,,
Why is it that she can connect to my Personal Hotspot on my iPhone 5 even when I have the Personal Hotspot on my phone set to OFF?
Is this working as designed? Even if I change my phone's Personal Hotspot password, she can still instantly connect even if I have it set to OFF on my phone. You'd think that it would require for me to have it set to ON? Or at minimum, if I changed the Personal Hotspot password on my phone, it would at least prompt her to enter a valid password?
Thanks!

WRE54G not working with D-Link DIR-655

After having 2 Linksys WRT310N units fail within 14 months, I was given a D-Link DIR-655 to use for my home network. When I originally purchased the WRE-54G for use with the 310N, the signal strength as indicated on a Tivo and PS3 went from 20%-40% range to 70%-85%. These two components are approximately 30 ft horizontally, and 20 ft down vertically from the router.
Upon replacing the router with the DIR-655, both of these units are again registering signal of 20%-40%, as if the WRE-54G is not functioning, and/or the TiVo and PS3 are getting their wireless signal directly from the DIR-655.
I can access the WRE-54G's web interface, can ping it, can see it as active in the DIR-655's interface, and have two solid blue lights. Everything has been powered down and reset multiple times. I have the same issue whether or not the WRE-54G sits inside or outside my DHCP range.
How can I determine if these components are getting signal from the router through the WRE-54G or if they are getting the signal directly from the router and bypassing the WRE-54G, and is there a way to "force" these components to take signal from the WRE-54G?

Hello. Is the D-link an N router? The WRE doesn't really work well with N routers. The ppl that have say that security must be disabled. I think I have read posts that got this working, though. I'm wondering if the WRE is physically on the edge of your signal strength, e.g. if you got the WRE closer to the router it would work better. The only thing that is unusual is that you said you have two solid blue lights. The activity light should be blinking blue. So I guess I don't think the WRE is really doing anything right now, though you have all the indications except for increased signal strength.
As far as forcing the equipment to connect, you'd just have to set up static IP's and say that the WRE IP addy was the gateway, not your router. But I don't think that is the problem as WIFI will connect to the stronger signal if it is present. I just don't think the WRE is repeating the router signal.
Edit: Did a search. See if this post helps:
http://forums.linksysbycisco.com/linksys/board/message?board.id=Range_Expanders&message.id=2611&query.id=16490#M2611
Message Edited by Luckydog on 06-19-2009 03:07 PM

On Ticketmaster, the page titled "Box Office" where ticket information should be provided is mostly blank and on the Error Console is "ClickTrack is not defined" with a link to the problem page.

I'm using Firefox 4.0.1 on a Dell Inspiron laptop with Vista. I've had no problems before buying tickets from Ticketmaster using the same system.

Thanks for pointing that out, it was not apparent on the day i used them and wrote the How-To. The links have been replaced with the SID# (Solution ID #) and the title given for the Article.
Have fun

Stabilizing not working with Dynamic Link

So, here's the steps:
1) Right click clip in premiere
2) Select 'Replace with after effects comp...'
3) In AE i click 'Stabilize Motion'
4) Select motion source 'cu_1.mpeg' the only video track
5) Check 'Position' and 'Rotation'
6) Setup my two tracking points
7) Click 'Analyze Forward' button
8) When analyzing is done i click 'Apply'
At this point the clip is stabilized.
9) Click 'Save' and return to premiere
This is where the problem is. Premiere sees the linked AE comp but doesn't do all the stabilizing. From what i can tell it's doing the anchor point but ignoring the rotation in the AE comp. I think this because i do see the edge of the frame moving around like it's doing some stabilization.
The clip is fine if I pre-render the AE comp.
Any ideas?
Thanks,
p

quote:
Originally posted by:
DwayneHeronimo But when I try to enbed the font or
setting embedFonts = true the text just disappears.
It's not enough to just type : embedFonts = true.. You have
to link also your fonts to be included in the produced flash - but
be careful. It will increase enough your swf 's file size,
depending the sets of fonts you enter!
The only secure way I have found to do it, using and other
languages characters, is to create a movieclip inside the first
frame of my file, containing dynamic texts with all types fonts
that I am using in my application (i.e. Myriad Pro, Myriad Pro
Bold, Myriad Pro Italic.. etc). I type on those texts just a dot,
and I embed them via Flash CS3 enviroment my fonts. Then I make the
movieclip Invisible.
If you want an example check this one:
http://www.sp7.gr/adobe_forum_data/04_EmbedFonts.zip
Due to embed fonts, the size of swf is ~180KB, although it
displays just a fading text....!

Touch screen not working with internet link in safari

Anyone has the same problem?
After 1.1.1 update, my touch screen occassionally fails to respond any tap on internet links in safari. no matter which web site you go to, no link will work on tap.
I tried to clean catch, cookies, etc. The only way to out of it is to reset the phone (both key pressed).
It happens about once or twice a day, not often enough for Apple people to duplicate it, but enough to bother me.

I have had the same exact problem occur 3 or 4 times since the update. I fix it by turning the phone off and on again.

Your Session is not Valid with Google link

Hi Gurus,
I have a B2C with 3 different scenario and shop.
When Google or other Search engine indexing my Ecommerce pages
and allow anonymous people to access to pages, they have a Invalid Session Page.
How can fix this kind of problem?
Thanks
Nicola

This is my Stack Error text
java.lang.ClassCastException: java.lang.String incompatible with java.lang.Boolean
     at com.sap.isa.backend.r3.shop.ShopBase.read(ShopBase.java:626)
     at com.sap.isa.backend.r3.shop.ShopR3PI.read(ShopR3PI.java:99)
     at com.sap.isa.businessobject.BusinessObjectManager.createShop(BusinessObjectManager.java:209)
     at com.sap.isa.isacore.action.ShopReadAction.isaPerform(ShopReadAction.java:431)
     at com.sap.isa.isacore.action.IsaCoreBaseAction.isaPerform(IsaCoreBaseAction.java:377)
     at com.sap.isa.isacore.action.IsaCoreBaseAction.isaPerform(IsaCoreBaseAction.java:417)
     at com.sap.isa.isacore.action.IsaCoreBaseAction.ecomPerform(IsaCoreBaseAction.java:343)
     at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
     at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
     at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
     at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
     at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
     at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1012)
     at com.sap.isa.core.RequestProcessor.processForward(RequestProcessor.java:643)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:260)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
     at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:373)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Any Help would be appreciate..
Thank
Nicola
Edited by: Nicola Bisinella on Jan 21, 2010 10:14 AM

Group shows in contacts but does not populate to send?

Say I want to send or forward an email to a group-- it works fine from the desktop. Although the iPhone Contacts book shows all members correctly, so I guess they are syncing properly, and when I type the name into the Send To field it autofills the group name, it then informs me that this doesn't look like a valid email address and does not populate with group addresses.
I see a number of folks have had similar questions but I'm not seeing an answer. IS there one? (iPhone 4, latest OS)

the hd of the macbook shows both the old itunes folder (4123 songs, 25 GB) AND the new itunes folder (all songs, same size)
both? on the new MB? where are these located?
Your iTunes folder should be in the SAME relative position on the new Mac as on the old. If not, then try copying it to that place (e.g. ~user/Music/), then relaunch iTunes with the option key held down, and when asked to Choose Library.., point it to your iTunes folder. (iTunes needs a Library file pointing to a Music folder in order to display and play your music.)

Survey Builder : Survey question not populate with questionnaire link.

Similar Messages

Maybe you are looking for