Survey - For all 875p and 865pe : Would you buy MSI MotherBoards Again???

I dont know if this should be done here in MSI's forum but im really pissed off with these boards and until they fix those MANY BUGS i can only speak badly about them.
All i know is that i have another P4 with the Gigabyte's 8INXP Motherboard (7205 chipset) and it's stable as hell...running for almost a year now, it's much older and yet AGP 8x WORK'S WELL!!
I spent alot of money on this new system and i'm already feeling sorry for it...i was going for an ASUS P4C800 deluxe and that's what i should have done...more money but much more reliable.Should have read the forum before buying my 875p-Neo.
Well give your opinion...
My opinion is...i had never experienced computer chaos until now!!!
So with this image of MSI i will not buy another Motherboard from them.
Leba

Well I have to tell everybody that I Personaly happen to think that MSI Makes The Most Stable Motherboards that I have Ever Used ....I have owned a total of 9 Different MSI Boards over the Years, and I still have 2 Boards in operation in my home right now.....If you see by my signature that My 2'ND System I have running now is the Brand New ABIT IC7-MAX 3, And the Only reason that I purchased the ABIT is because I wanted a System that was going to be a "Shoe In" for the Pentium Prescott as far as the ability to be able to provide enough stable V-Core Voltage, as the ABIT IC7-Max 3 has From the Begining of it's inception was ment to be a Prescott Board (as the IC7-G is really thier i875 Canterwood Board), ABIT says that the New IC7-MAX 3 was built for the Prescott with the Options to provide more Voltage going to the CPU, As it has 4 Phase Power (instead of the usual 3 Phase) it also has the new OTES technology which isolates the Mosfetts and the Output transistors and capasitors with huge Heatsinks and thier own Dedicated Enclosed Fan assembly that blows the hot air off of them and removes it to outside of the Case.....But other then the Fact that this Board is Built for Heavy Overclocking in Mind as I can reach 290 MHZ FSB at a 1:1 Memory Ratio, This board also Cost a Fortune compared to to my MSI Boards ...When this ABIT first Came out it was almost as exspensive as BOTH of my MSI Boards put together !! I am not kidding, This Board was Well over $300 US in Late September, And on top of this All of these model ABIT Boards Needed to go back to the Factory because of a DDR and VTT Voltage Problem ...So Would I by another ABIT product..Absolutely NOT would I buy anothe MSI product, well put it this way , I have the New I865PE-PFISR Extreme Edition On order, And on top of it all I think that MSI Does have the BEST Tech. Support (all you have to do is Call!!) and where are you going to find a Product FORUM that has A better Administration and Moderation Team....Not to mention all of the Great Members that go the Extra Mile in order to Help One Another....You wont Find Better, Just Browse the other Websites..ie ASUS, VIA, AOpen, ABIT, Gigabyte,....All that you see in those sites is a bunch of Ranting and No HELP.........MSI ROCKS............Sean REILLY875

Similar Messages

Automatically generate thumbnail image icons for all pix and vids...

hello,
i've searched around on the forums a bit about making the icons of my pics and vids actual thumbnail images made from the picture or the first frame of the video.
a lot of responses are mistaking this question for "how do i put the window into icon view?" this infact is not the answer that i suspect a lot of windows converts are looking for.
windows automatically makes such icons for all pix and vids if you put the window into icon view.
i notice in at cmd-j or in the window preferences there is a checkbox for "show image preview" or something like that, but despite this being checked, my pix and vids do not show an image preview. i'm gathering that this information does not exist in the resource fork which mac uses to organize photos.
is there any script or addition i can make to my system to automatically generate icons for pics and vids of all types? how to i suggest to mac that they add this functionality into the next release?
thanks for your time,
max

The Finder will create icons "on the fly" for nearly all graphic type files (jpegs, tiff, psd, and so on) and display them in both icon view and column view, provided the appropriate view preference has been set. Movies will just have the generic movie icon in icon view, and have a "live" preview in column view, ie you can play them in preview mode. If you want to add a permanent thumbnail which will display in all views, and whether or not the preference has been set for a particular folder in Finder, you'll need to add a thumbnail to the file. There are lots of ways to do this for static pictures, even rather clumsy ways to do it for movies, but the easiest thing is to get CocoThumbX:
http://www.stalkingwolf.net/software/cocothumbx/
Drag and drop both static pictures and movie files onto the application and a permanent thumbnail is created. Indeed, it will create cool thumbs even for things like PDF and HTML files (code or rendered display). For movies to get a thumb, they must be in a format that QuickTime can read. It has a set of preferences for just how you want the thumb determined (eg random or at a certain time), and you can drop batches of movies or even folders to have it assign thumbs to multiple movies at the same time. It is a way cool piece of shareware.
Francine
Francine
Schwieder

HT204053 My kids now each have an itouch, should we all have different apple ids even if I am paying for all itunes and app store purchases? what about icloud? I would like to share itunes and app purchases, but not necessarily photos...help please!

My kids now each have an itouch, should we all have different apple ids even if I am paying for all itunes and app store purchases? what about icloud? I would like to share itunes and app purchases, but not necessarily photos...help please!

The recommended solution for most families is to share the same Apple ID for iTunes and App Store purchases, so you can share your purchases, but us different IDs for iMessage, FaceTime and iCloud. With this arrangement, each person can automatically download purchases made on the shared ID (by turning this feature on in Settings>iTunes & App Stores), while keeping their FaceTime calls, text messages and iCloud data (including photo stream) separated. There is no requirement that the ID you use for purchasing be the same as the ID you use for these other services.
This article: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/.

I have 3 apple devices and I use the same apple ID for all 3. I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device. Anyone know how I can do this?

I have 3 apple devices and I use the same apple ID for all 3. I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device. Anyone know how I can do this?

Create a new ID:
On the iPod go to
- Settings>Messages>Send and receive and sign out your ID and sign into the other one. Make sure that only her ID email address is listed.
- Settings>FaceTime sign out of your ID and sign into the other one. Make sure that under You can be reached at only the newID email address is listed
- Settings>iCloud and sign out and sign in with the new one
- Settings>iTunes and App Store and sign out your ID and sign in with the new one.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

HT5243 It says on the "Java for Mac OS X 10.6 Update 8" pg that this download is for all users and supercedes all earlier versions. Yet to the right is says you HAVE to have 10.6.8 as a requirement. WHICH is it? Is it for all versions of 10.6 or not?

It says on the "Java for Mac OS X 10.6 Update 8" pg that this download is for all users and supercedes all earlier versions. Yet to the right is says you HAVE to HAVE 10.6.8 as a requirement. WHICH is it? Is it for all versions of 10.6 or not? Why isnt this made more clear?
And question is STILL not answered. WHICH is to be downloaded and used?
I would like an answer.

Thank you for the clarification! It is really kinda circle-speaking to state on an information page to put forth info people need in that manner. It really does add to the confusion and frustration when you need a simple,
straight answer, such as you gave, and you dont get one. Kind of like that . . other... software company....
This rabbit hole still continues, though. I'm going to ladder it out, just to see for myself:
Have: MacBookPro / 2.4 GHz/ Intel Core i5/ running OS X 10.6.3 -
Need: latest version of Java, so Flash update can be loaded;
                              (want html5 to be the standard so badly, but client wants Flash)
Attempted: Tried to find Java for Mac OS X 10.6 Update 2 on Apple website. No Joy.
        Found:   Update 2 is proper update for Mac OS X 10.6.3. Could not find download on Apple website;
                       - No Joy.
Attempted: Tried to find Java for Mac OS X 10.6 Update 8. Half Joy. Confusing, no straight info.
        Found:   In order to install update for Java, must update OS X from present 10.6.3 to 10.6.8
Attempted:   Tried to find update to OS X 10.6.3 to 10.6.8. on Apple website.
how far does the rabbit hole go?

Why does Maverick mail no longer search properly? I used to search for a name and it would find it in All mailboxes. Now it sometimes works, but mostly not. Any solutions?

Why does Maverick mail no longer search properly?
I used to search for a name and it would find it in One or All mailboxes. Now it sometimes works, but mostly not. Any solutions?

I would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
Still hoping someone out there can help me.
thanks,
anne

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]

Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

What application does an iMac come with that lets you see the core of its system, and what would you look for to determine if malware was on it?

What application does an iMac come with that lets you see the core of its system, and what would you look for to determine if malware was on it?

This extension?
*FireBug: https://addons.mozilla.org/firefox/addon/firebug/
Firefox 4 also has a build in inspector: Firefox > Web Developer > Inspect

Email Notifications through workflow for all Approved and Rejected Orders

hi,
i have to send Email Notifications through workflow for all Approved and Rejected Orders to the user who have submitted the order for approval.how could it be done.please send ur solutions.
regards
yesukannan

Hi,
An option would be use Oracle Alert. Create an event based alert on the table where you have order approvals or rejections. This alert will be raised after inserting or updating this table. Create an action linked to this alert, and choose message as action type.
This setup can be done under Alert Manager Responsibility.
Regards,
Ketter Ohnes

Difference between Due Date for All Tasks and Duration per task in an approval workflow

Hello,
I'm starting to read up and learn about approval workflows in Designer 2010. I am confused by the fields "Due Date for all Tasks" and the "Duration per task". I understand that the Due date for all Tasks is the date that all
of the tasks in the workflow must be completed by. And I understand that the duration means each task has x number of days to complete.
But I dont know whey we need them both. If I have the task duration set to two days and there are 3 tasks involved, then wouldn't the due date be 6 days from the start? Why would I have a due date for all tasks that is completely different than
the sum of the duration of days for each task?
Please help shed some light!

Hi Michelle,
Due date for all tasks, this setting specifies the date by which all tasks are due. It’s used for serial and parallel
task.
Duration per tasks, this setting specifies the date by which an individual
task is due, it’s used for serial workflow participants.
Note, when you create an approval workflow, select task process participants(approvers oob approval workflow), we can also
select once at a time(serial) or all at once(parallel).
For more information, see
http://office.microsoft.com/en-us/sharepoint-server-help/use-an-approval-workflow-HA101793831.aspx
Best Regards.
Kelly Chen
TechNet Community Support

Setting up proxies for all users and clearing it on logoff

Hi,
This is an emergency, So any help would be welcomed.
Scenario - I have a lab which is configured with windows 8.1 enterprise 64bit. I created two local account. I want to connect it to our proxy such that its set up for all users and local users would not be able to change it. this way they have to log in
to use the browsers (IE/Firefox/Chrome). Secondly if they logout and log back in, it should require them to re-login to use the browsers. (It looks like its cached by default.
Any idea how to do these, Any suggestions are welcome.
I would Preferably like to script this so that I can run it on all machines.
Thanks
Manoj

Hi,
Could you please have a share with the network environment?
If we are in a domain environment, we could configure the proxy using group policy, but the configuration won't change unless the policy changes.
For the scripting, if you would like to use, we'd better ask in the scripting guys forum for a better help.
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home
Best regards
Michael Shao
TechNet Community Support

What is the condition for using 'for all entries' and why?

what is the condition for using 'for all entries' and why? can any body tell the reason for this ? its a big favour of me .
regards,
ravi.

hi,
for all entries is used to join two or more tables.
It is same as join but performance wise for all entries is more effective.
You can only use FOR ALL ENTRIES IN ...WHERE ...in a SELECT statement.
SELECT ... FOR ALL ENTRIES IN itab WHERE cond returns the union of the solution sets of all SELECT
statements that would result if you wrote a separate statement for each line of the internal table replacing the symbol
itab-f with the corresponding value of component f in the WHERE condition.Duplicates are discarded from the result
set. If the internal table itab does not contain any entries, the system treats the statement as though there were
no WHERE cond condition, and selects all records (in the current client).
for example:
SELECT * FROM sflight INTO wa_sflight
FOR ALL ENTRIES IN ftab
WHERE CARRID = ftab-carrid AND
CONNID = ftab-connid AND
fldate = '20010228'.
this condition, return all entries of the sflight
hen using FOR ALL ENTRIES the number of matching records is restricted to the number of records in the internal table. If the number of records in the database tables is too large then join would cause overheads in performance. Additionally a JOIN bypasses the table buffering.
So for all entries is used for filtering out the data from the two tables based on the entries in them.
Advantages:
1) For all entries avoids inner join & so the performance increases.
2) For specified values in 1 itab, if you to fetch values from other table you can use it.
3) Use of select stmt in loop is gets avoided, as u can use read statement on the the new itab.

I keep getting an intermittent error on web pages where a blue box with a question mark appears instead of pictures. For example Facebook and Zappos would load normally on one visit, but if I visit other websites and return I get the blue box.

I keep getting an intermittent error on web pages where a blue box with a question mark appears instead of pictures. For example Facebook and Zappos would load normally on one visit, but if I visit other websites and return I get the blue box instead of pictures. If I restart the problem will go away temporarly. However, normally returnes in time.

HI,
From the Safari Menu Bar click Safari/Preferences then select the Appearance tab. Tick the box next to: Display images when the page opens.
If that box is already ticked, from the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset. Relaunch Safari. If you still have problems loading images, go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
Web pages now include a small icon or 'favicon' which is visible in the address bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. *To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
Make sure Safari is not running in Rosetta. Right or control click the Safari icon in your Applications folder then click Get Info. In the Get Info window click the black disclosure triangle so it faces down. Where you see Open using Rosetta... make sure that is NOT selected.
If you still have problems, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
Carolyn

Would you buy a 64gb iPad 3rd Gen or an iPad Mini 16 gb if you could purchase either for $320? Thank you

Would you buy a 64gb iPad 3rd Gen or an iPad Mini 16 gb if you could purchase either for $320? Thank you

I know your question has been answered by Demo and agree. And I agree that I would stay away from the ipad 3 that was discontinued after only months on the market.
That said, I'm not sure where you were getting an ipad 3 for that cost - a friend, a store, an official reseller? I would be very careful of that.
If you decide to buy a used ipad or even a new 16 gb mini, I strongly suggest you only buy it through Apple's online only certified refurbished store. They come and go as they are refurbished by Apple, so if you see what you want, buy it. An ipad mini 32 gb is now $339 in the refurb store. That's only $20.00 more than you're willing to pay.
Personally, I'd go for the regular sized ipad with more space, but I would pay more if necessary and only buy it at the Apple online refurb store. If you buy an outside ipad, you usually only get the rest of the warranty if any time is still on it. Some resellers do not give any warranty. You might not know if it's been dropped and is working now but might quit soon, etc. You could end up with a demo version from a store, the battery could be on its way out, etc. There have been such stories on here.
Each refurbished ipad and mini comes with a brand new front and back cover, a brand new battery, and a full one year warranty , including 90 days of phone support. It will come in the white box with the charger just as a new one does, with free and fast shipping.
We have had two 64 gb refurbed ipad 2's from the Apple store for almost a year and a half. They have been great!
(As others have and almost always suggest, get as much space as you can because you cannot increase that. Many end up wanting to do more than they planned as they learn about new apps and all they can do with their ipad. Also, updating apps also will take up more space.)
And you don't get 16gb or 32 gb, etc. Some space is used to run the ios and apps that come with the ipad that are not removable.
Oh. I needed to add that through the refurb store, you'll get it with ios 6 still installed.
Hope this helps.

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out.

Survey - For all 875p and 865pe : Would you buy MSI MotherBoards Again???

Similar Messages

Maybe you are looking for