Survey Question on Set Up

Hi,
I am trying to implement Surveys in SAP CRM 5.0. When I go into SURVEY_SUITE and click on the test survey or any survey inside I get this error "Error when opening a RFC Connection"
Can anyone tell me what or which system I would need to define.
Thanks
Sathya

Thanks to your replies. I have checked both the suggestions and It looks like
Vadim - R/3 Connection is in place. and connection test works
Gregor - As we also use ISA we have the VM Active.
Do I need to do any about CATServer this is not something I am too sure about. As far as my errror goes it still happening.
Sathya

Similar Messages

Survey Builder : Survey question not populate with questionnaire link.

Dear Friends
i have created application using SURVEY BUILDER Package application .
i have two application with same schema .one is my created application :100 and second is Survey Builder pacaskge application 105 ,with no chamge in survey builder application.
My Questionnaire Link is created but when i put this link into address bar then there is no rection,no question set open in that window.
Questionnaire Link
http://178.110.201.231:7777/apex/f?p=100:Q::AAL8:::code:AQDQEIWJAUWVCGGZ
this is my application question link.
But if i change application no 100 with survey builder application 105 and submit then survey question open .
I am confuse where is problem why survey question does not populate with my application 100.
Please help.
Thanks

Did you get your link from "Manage Respondents"?
I usually get a link like
http://apex.oracle.com/pls/apex/f?p=67351:Q::ABCD::::
(this is an example that doesn't point to a real live survey).
http://178.110.201.231:7777/apex/f?p=105:Q::AAL8:::code:AQDQEIWJAUWVCGGZ
did not work for me, maybe because of your specific IP:port in the URL. Sometimes the colons ::: create a problem when copying/pasting to email, so I use a service such as is.gd to transform it into a simpler URL like
http://is.gd/B7hxIl
Does that help?
Ben

Survey questions show up as incorrect in reports

I have a survey question that can be answered yes or no, but the question shows up as incorrect in the reporting and it also doesn't let the users complete the module as it thinks they've answered that question incorrectly.

All answers to survey questions are tracked as incorrect, because there is no correct answer.
There is also a bug, I don't recall the number, for content that only has survey questions, and how it reports. Try setting the pass/fail level to 0% and see if that helps. If not, change the reporting to be complete/incomplete instead of pass/fail. This means they must look at all the slides to be able to move onto the next object, but it should help solve the problem.

Attaching the survey questions and the answers to the Lead

Hi Experts,
I am making Lead from the survey based on the rating of the questions. I am successful in doing so but I even need to make an attachment of this survey questions with the answer seleted, to the generated lead.
I am trying to find a FM which can do this.
If anybody here can guide me to this will be really helpful.
Regards,
SA

Hi Saurabh
Maintain the setting for Questionnaire determination through following path
SAP Implementation Guide Customer Relationship Management Transactions Settings for Leads Questionnaires for Leads  Define Determination for Questionnaires
Here you will have to maintian only your lead tarnsaction type with Determaination and valid dates (if reqd). Please note do not maintain any Survey against this entry. This should help you to show the responded Survey in Assessment block in Lead.
Hope this will help.
Regards
Mallikarjun

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

I see there is no way to change the security questions i set up when I first purchased my ipod touch. Software takes you in circles with no help

I see there is no way to change the security questions i set up when I first purchased my ipod touch. All the answers I get do not work. Can't by another device until I get around this issue.

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
      Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
      like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
      tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
      "done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
      Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
      should be asked to verify your security code for the credit /debit card and NOT the
      security questions.
d. At this time you can remove the card by going back in to edit the payment info and
      selecting "none" as the card type then saving the changes by selecting "done". You
      should now be able to use your iTunes store credit without answering the security
      questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

Survey Question - Carry over data

Hi,
Is there a way to carry over responses/answers from a survey question from one slide to another? I have a scenario where users analyze a situation and note the problems (survey answers - ungraded) on one slide. I don't want them to see the answers to the scenario until the next slide but want them to remember what they've put in as the problems with the scenario. I've searched the forum but didn't see this situation. Thanks very much for any ideas.

For short answer questions the value of the system variable cpQuizInfoAnswerChoice is the exact text that was entered, which is great news for you I suppose? Be sure to assign the value of that variable to a user variable before the next question is answered. That means that best event to trigger the action is the On Enter event for the next slide. As you perhaps know, there is no On Exit event possible for Question slides.
http://blog.lilybiri.com/events-and-advanced-actions
You will have to create an advanced action for that: Assign v_answer1 with cpQuizInfoAnswerChoice
And you'll need a different action for each question, even shared actions couldn't help you because a variable (it is the user variable v_answerx that will be different for each action) cannot be a parameter.
Lilybiri

TS3297 I don't remember the security questions I set...!

I don't remember the answers to the security questions I set for my apple store account.
I ned to know who to restore them or change them because I can't buy nothing from my iPad

Click here for information. If you can't get the answers emailed to you for some reason, contact the iTunes Store staff via the link in that article.
(75530)

Question about Setting Window Title/the use of AVWindowSetTitle()

Hi everyone,
I have a question about setting the title of the window in which the Acrobat viewer normally opens a PDF file. The documentation states that AVWindowSetTitle() cannot be used in this case. However, using it has worked with versions of Acrobat/Reader up until and including version 8.
Everything breaks down starting with Acrobat 9.
According to the documentation I am supposed to do the following: "To set the title of a window in which the Acrobat viewer opens a PDF file, you must replace AVDocOpenFromASFileWithParams() and pass the window title in tempTitle."
Unfortunately, there are 2 problems I have with this approach:
     I do need to be able to change the document title on document Save, not only on document Open
     I do not know what AVDocOpenFromASFileWithParams() implementation has to look like if I have to replace it using HFTReplaceEntry().
Is there a sample customized implementation of AVDocOpenFromASFileWithParams() somewhere that I could take a look at?
Is there a way to change a document Title inside Acrobat/Reader window after a Save operation?
Thanks a million,
Lana2010K

     I am sorry. I don't know how you tested this and came to conclusion that this works correctly in Acrobat X.
     I just tested our Acrobat plug-in with a trial version of Acrobat X and this did not work.
     When we open a file in Acrobat (doing it ourselves in the plug-in by adding another specialized open) we set the window title to something different from the default file name. Then if a file gets edited and saved (File->Save), the window title gets reset to the file name. In the PDDocDidSave callback we call AVWindowSetTitle() to set it back to a more descriptive window title we need. This has worked up until and including Acrobat 8, but does not work in either version 9.0 or 10.0.
     Also, I just modified the plug-in code to always change the Window Title of every document (even if opened through native File->Open) on document Save. It does not work.
     Please help,
          Lana2010K

Question about setting cookies and custom authentication

I have a question about setting cookies.
I have two different 'projects' in HTMLDB - we will call them App1 and App2.
I also have two different connection configurations setup in the DADs.conf file. - we will call them Connect1 and Connect2.
App1 is setup to use database authentication (no user is specified in the DAD) and uses Connect1. Once the user successfully logs in, we set a username cookie (this is a persistent connection).
We created a custom authenticatoin scheme for App2 - this scheme checks for the username cookie (set by App1). We would like for App2 to use Connect2 (HTMLDB_PUBLIC_USER is the default user specified and it uses connection pooling).
Is it possible to set a cookie from App1, Connect1 for App2, Connect2 - then redirect to App2 and pick up that cookie?
Here is an example of what we are trying to accomplish:
A user loggs into App1, we set a cookie, and the user is redirected to App2. If the cookie exists, we allow them access to the home page in App2, if no cookie, we redirect back to a 'Login Failed' page in App1. We don't want App2 to use the same database connection as App1 though, we need App2 to use connection pooling.
Is this possible? OR...Is there a better way to accomplish what we want to do?
This is an enhancement to an existing app. Our requirements are to use Database Authentication (setup where pass expires after 60 days or so, cannot reuse last 3 passwords, etc.) - which is already setup and being used by other applications in our organization. All of our users have accounts in the database. We don't want users to have a new username/pass - and we don't want to manage a separate group for HTMLDB apps.
The existing application uses HTMLDB's built in authentication - which uses database username/pass, and it uses connection pooling, but we cannot handle the pass expire stuff in it, unless there's something we're not seeing or understanding - at least that's how our DBA explained it to us.
Any help with this will be appreciated so much. I can send you the code we have if needed.
Thanks!

Same problem here. I have so many problems with this remote app. Is there an iTunes API? I would like to write my own remote app that actually works.

Can you embed survey questions in discontinuous places on a Web site?

Can you embed survey questions in discontinuous places on a Web site? By analogy, think of an online magazine that would have survey questions at the end of each article. The reader would never go through the survey from start to finish, but rather read an article, then answer questions about subjects covered in the article, then read the next article, answer or skip questions, and so on. In this scenario, if there are 30 survey questions, I would not want 30 separate surveys, but rather an means of rolling up all the answers from a single respondent who logs into the Web site. Can Acrobat forms help in this context, or do you know of other software/services that I should consider?

You could look into a service such as http://www.formsite.com/. I believe it can do what you want. The support there is excellent so if you can't find the answer looking around, just contact them.

Read CRM Survey question and answers

Hi,
I have a requirement, where-in I need to read the Survey question and answers.
I am able to read the order data using CRMD_ORDER_READ and able to retrieve the xml id from the table CRM_SVY_DB_SVS. But unable to go further and retrieve the Survey data in text format.
Any suggestion would be of great help and I promise to reward all the helpful answers.
Thanks in advance,
Shankar.

Hi Shankar-san
When I had a same inquiry, I used class 'cl_crm_svy_survey_texts' like below.
data:
imp_guid type CRMT_OBJECT_GUID
    v_valueg       TYPE crmd_survey-valueguid,
i_surveyt       TYPE REF TO cl_crm_svy_survey_texts.
SELECT SINGLE s~valueguid
   FROM crmd_orderadm_h AS h
    JOIN crmd_link       AS l
     ON hguid      = lguid_hi
    JOIN crmd_survey     AS s
     ON lguid_set = sset_guid
   INTO v_valueg
   WHERE h~guid = imp_guid.
CREATE OBJECT i_surveyt
    EXPORTING
      i_valueguid      = v_valueg
    EXCEPTIONS
      survey_not_found = 1
      values_not_found = 2
      OTHERS           = 3.

Forgot security questions, Cannot set up rescue email

this is bugging me so badly, i cannot use my itunes gift card because it asks for security questions, when i try to retrieve my security questions by setting up a rescue email, it requires me to answer the security questions which i cannot do. what in gods name do i do.

You won't be able to add one until you can answer 2 of your questions, you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Email question: I set my Full Name in Preferences/Accounts/Account Information. Why does my name default to a partial version of my name on incoming/outgoing mail? How can I correct this?

Email question: I set my Full Name in Preferences/Accounts/Account Information. Why does my name default to a partial version of my name on incoming/outgoing mail? How can I correct this?

Lurup wrote:
I apologize for my ignorance, but what do you mean by 'everything'? The computer name, e-mail accounts, icloud accounts etc?
My work computer (this mac) i use with my private icloud account so I have access to my private calendars etc. My husband's airbook is also connected to that icloud (since I only have 1 icloud account) and so is our shared ipad. Is that where the problem is? Do I need to change everything on those devises into my name too? Thanks again for you time and help!
So you are sharing the account. Very bad idea.
Get your husband his own account and stop sharing yours, they are free.

Security questions never set up

Hi, I'm trying to buy songs with my apple ID in App Store and I can't because the system ask me security questions that I never set up.
I consulted apple support and they mention a recovery email that I never set up as well...
Just to clarify, I don't have problems with my apple ID or password.
How can i solve this issue?
Regards,
Ney Paz.

If you log into your account via http://appleid.apple.com are you able to select and questions and set their answers : http://support.apple.com/kb/HT5312 ?
If not, then as you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Survey Question on Set Up

Similar Messages

Maybe you are looking for