Survey questionaire disappearing when updating the start date and end date to previous year
Hi Experts
When the start and end dates are updated to the previous year dates the questionaire is disappearing from the assignment block, is this a standard behaviour or this is a bug which needs to be raised to SAP.
Please advise.
Appreciate for a quick response as this is quiet urgent.
Regards
AM
Hi AM,
Check the SAP Note 1629777 - SVY: Survey becomes invalid if the from date < sysdate
This should resolve the issue.
Regards,
Gervase
Similar Messages
-
Error 4 when updating the text data
When i am trying to load the data using IP i am facing the issue Error 4 when updating the text data.Please suggest me
Edited by: srikanth reddy612 on Dec 15, 2011 12:45 PMhi srikanth,
you might have selected given lowercase data
and please check in the Infoobject the lowercase Checkbox is unchecked then it will allow you to update from IP.
also check in the Datasource fields tab whether particular field is unchecked with lowercase.
if checked all records you are pushing will have to be in uppercase.
thanks
Sankaresh S -
Hide the start time and end time in ESS portal
Experts,
We have a requirement to hide the Start time and End time on the header section of the travel request / expense sheet in the ESS portal. I have searched through the configuration and found several place to hide the start time and end time of segment yet these have no impact on the porta start and end time fields.
Please Advise.
Best Regards,
Martin WeakleyHi Martin,
you can achieve this with administrative personalisation. In portal content navigate to the role where you deltalinked your iView, click "preview". When a new Window for the preview is opened, notice the URL contains "&sap-config-mode=true". Now right click on the fields you want to hide and choose "enter configuration" (or the like, wording is not exact) from the context menue. The WD-UI-Element tree opens where you can directly hide/customize properties of the WD. When clicking save+exist you can also transport the alterations you did.
maybe this helps or gives you a helpful alternative to the already stated measures in this thread
regards, Lukas -
OBIEE 11g - Current year date and the same date in Previous year
Hi Experts,
I have an attribute say RECEIPT NO, i want to display the "No of Receipts" i.e(count(receipt no)) for any given date in the current year as well as for the same date in previous year.
Please suggest me how to achieve this in 11g.
ThanksHi Veeravalli,
Thanks for your prompt help.
Could you please ellobarate this. I have to display the count(receipt_no) for the last year same date.
Thanks -
SCOM Alert Connector - not updating the start time and finish time
When I am monitoring the status of connectors in service manager console, I found that for SCOM Alert Connector the Start Time and Finish Time are not updating. Previously it was updated daily. As of now, service manager is working fine but would like
to check will it create any issues? Even I have cliked on Synchronize Now, but there is no update. Please guide me on this to trouble shoot further? Thanks.Hi,
Based on my research, the Start Time and Finish Time values are not updated when an alert connector is synchronized. These values are only updated when alert data is transferred between Operations Manager 2007 and Service
Manager.
More details, please refer to the link below:
http://technet.microsoft.com/en-us/library/hh495609.aspx
In addition, here is a blog about troubleshooting for SCSM and SCOM alert connector:
http://blogs.technet.com/b/servicemanager/archive/2010/04/14/troubleshooting-tips-for-your-scsm-scom-alert-connector.aspx
Regards,
Yan Li
Regards, Yan Li -
I am needing to create a line graph with dates consisting of MM/DD/YY along the category axis. I would like to rotate the labels 45 degrees and have them stay when I update the graph. I have read about manually doing it, I even made an action to make it faster, but it still seems inefficient. Is there a setting that I could use to automatically create my labels as rotated? Thanks.
Hi Gravy Train,
I'm curious about why you are using 2 loops. You mentioned one is for monitoring and one is for DAQ....what do you mean by that? What is the overall goal of this piece of code. Also, I noticed that you are not closing the task. Since this is just a subset, I realize you could be closing it in your actual code, but just in case you're not.....it is very important that you close all tasks when you are down acquiring data.
Best Regards,
Starla T -
User Menu Image disappear when update the system menu
Hi all,
We created an user menu after the system menu Sales A/R, with an image as an icon.
And also we changed some of the system menu description.
But the problem is when you change some information from the Admistration menu, the system menu is updated and all the changes we made in the systems menu description and the image of our user menu, disappear.
The system menu description return to the oficial description and our image isn't showed after the system menu update.
Thanks,
Fran.Dear Francislaine,
There is a very good example which might be helpful in this context; given by SAP which is installed while installing SDK. The sample project is stored in the followng default folder :
C:\Program Files\SAP\SAP Business One SDK\Samples\COM UI DI\VB.NET\UIDIBasicApp
In th above sample project the basic need for adding images to the menu has been addressed.
PS: Would it be possible to change the system menu description before adding the image to the custom menu?
Regards
Arshdeep -
How to complete the iCloud update process without it taking forever as it has been doing?
try rebooting the ipad
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
then go back to settings/icloud and set up again -
<header style="box-sizing:border-box;color:#777777;line-height:1;font-size:13px;padding-right:46px;margin-bottom:3px;font-family:'Helvetica Neue', arial, sans-serif;">
</header>
I'm doing SP app development and have the following problem.
I need to check Start time and End Time in SharePoint Calendar using CAML query and then add a new event to Calendar list using the Start time and End Time that user has entered in 2 datapickers
in the form.
function AddCalendarListItems() {
var SD = document.getElementById("datepicker1").value;
var SThh = document.getElementById("St1").value;
var STmm = document.getElementById("St2").value;
var ED = document.getElementById("datepicker2").value;
var EThh = document.getElementById("Et1").value;
var ETmm = document.getElementById("Et2").value;
var T = document.getElementById("Title").value;
var S1 = SThh;
SD = SD.slice(6, 10) + "-" + SD.slice(0, 2) + "-" + SD.slice(3, 5) + "T" + SThh + STmm + ":00Z";
ED = ED.slice(6, 10) + "-" + ED.slice(0, 2) + "-" + ED.slice(3, 5) + "T" + EThh + ETmm + ":00Z";
//alert("SD= " + SD + " , ED= " + ED);
var siteUrl = SiteCollurl + "/SharePointApp11";
var clientContext = new SP.ClientContext(siteUrl);
var oList = clientContext.get_web().get_lists().getByTitle('Calendar');
var ListItemCInfo = new SP.ListItemCreationInformation();
var newEvent = oList.addItem(ListItemCInfo);
newEvent.set_item("Title", T);
newEvent.set_item("EventDate", SD);
newEvent.set_item("EndDate", ED);
newEvent.update();
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQueryAddCalendarSucceeded2), Function.createDelegate(this, this.onQueryAddCalendarFailed2));
function onQueryAddCalendarSucceeded2(sender, args) {
alert("Success");
function onQueryAddCalendarFailed2(sender, args) {
alert('Add new item to the calendar failed. ' + args.get_message() + '\n' + args.get_stackTrace());
But I receive the following error:
Add new item to the Calendar failed. Column 'Start time' does not exist. It may have been deleted by another user.
I've checked and 'Start time' does exist. So it seems in SharePoint Calendar lists, field [Start Time] and [End Time] exist but do not exist at the Site Column level.
Please advise.Hi Khojasteh,
Use “EventDate” for Start Time field, and “EndDate” for End Time field. They are the internal name of the two fields, you can check it in the column settings page url like “Field=EndDate”.
If it isn’t the issue, please debug the code, in which line the error occurs.
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support -
How to get start date of fiscal year?
hi all,
how to get the start date of fiscal year by passing fiscal year variant and fiscal year?
please let me know.hi,
See this FM
FIRST_AND_LAST_DAY_IN_YEAR_GET " Provides the first and last calendar date for a fiscal year
Regards -
Any idea why my folders disappear when I complete my updatetes and/or sync my phone? This started w/ the latest Software Update.
Thanks!Sounds like you have Do NOt Disturb turned on.
settings - do not disturb - off -
When is the release date for Windows 8.1 update?
When is the release date for Windows 8.1 update? You know I pay my bill every month so that my carrier can provide me with the best service. And yet, I don't see any improvement in my service. It seems like Windowsphone is an inconvenience to Verizon and that is the way they seem to be treating Windowsphone users. Do you have the new Windowsphone in stock? No, but it is available online. Do you have any Windowsphone cases? No but they are available in the the color you want online. Screen protectors? No the 928 screen protector will not fit the Icon, but let me cut up this other one and make it fit.
This is the information I received via chat with customer service. We aren't all hearing the same thing.
>> Chat transcript removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator -
When and how to update the "saved data" in report ?
Hi,
The BO version is "BusinessObjects Enterprise 12.0"
The case is that, some reports are uploaded withe saved data. while viewing the reports, the reports return the old data.
How to view the update data while click the "View" in CMC/InfoView ?
I have tried to schedule it , then can see the update data in "View the latest instance".
Is there any approach to refresh/update the saved data in the report ?
Thanks and regards,
Forest
Edited by: Forest lin on Dec 5, 2008 12:12 PMHello Forest lin,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk -
Hi,
I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by
the target Office client. To debug those apps, update manifest files to exclude any unsupported API sets or Office applications, and then start the project again. Alternatively, you can debug your apps by using Office 365 as a target." when when
updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1 in manifest file though i have added host elements.
any help in this regard is highly appreciated
Thanks,
Santosh SutarHi Satosh Sutar,
Based on the description, you got the error message when you update the apps from version 1.0 to 1.1.
From the error message, it seems the menifest include some settings no allowed in the new version. Would you mind sharing more detail about how you update the project?
And here is an article about updating apps for Office and menifest schema files in the project for your reference:
How to: Update the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Cursor disappears when Rt-justify numeric data items
Folks,
Why does my cursor disappear when Rt-justify numeric data items ?
It does appear again when I actually start typing a dollar amount. Note that my item is a Number value in a database block and my format mask is $9,999,999.99 .
Thank you,
BobSorry, I copied in the incorrect link. Try this post: Field text Disappears And I found the other bugs I was thinking of: 379621 and 398900.
Maybe you are looking for
-
Extremely slow Crystal Reports environment
<p>Hi there, I need help with my Crystal Reports environment, please!</p><p>While developing a report I've noticed that everything is achieved with great slowness. Even right click menu shows up only after a couple of seconds. It takes more then that
-
Vga to dvi with cinema displays?
are the aluminum apple cinema display DVI-I or DVI-D? we have some extras and some people with vga computers (analog out) want to use the monitors. will a vga to dvi-i adapter work with these displays? or are they dvi-d (digital signal only)? thanks
-
Hi Has anyone used "W2 Reprint" service in ESS before? Can anybody say how does this work? I have read the online documentation, but it doesnot give much information. Where will the request go after submission?Does it go to the chief of Org.unit? Is
-
L_TO_CREATE_DN
Hi, in my code i have: SELECT * FROM lips INTO TABLE tlips WHERE vbeln = likp-vbeln. IF NOT tlips[] IS INITIAL. CLEAR: it_delit, l_wa_delit. REFRESH it_delit. LOOP AT tlips INTO wa_tlips. Compruebo el estatus de la posición
-
Touch screen and swipe problems on brand new iPhone 5S
I brought it to the Apple store and they restored it. It started happening again. So the Apple store gave me a new phone, but used the same microchip. Today, I couldn't tap out of voice messages. I tapped "recents" - nothing. I tapped "contacts"- not