Survey questions show up as incorrect in reports

I have a survey question that can be answered yes or no, but the question shows up as incorrect in the reporting and it also doesn't let the users complete the module as it thinks they've answered that question incorrectly.

All answers to survey questions are tracked as incorrect, because there is no correct answer.
There is also a bug, I don't recall the number, for content that only has survey questions, and how it reports. Try setting the pass/fail level to 0% and see if that helps. If not, change the reporting to be complete/incomplete instead of pass/fail. This means they must look at all the slides to be able to move onto the next object, but it should help solve the problem.

Similar Messages

  • What could be causing my multiple response survey question to show a non-response in LMS report?

    I have a 10 question survey that has been running fine and providing accurate responses in reports generated from my LMS. I made a property change to a multiple response type question that is now causing the reports to show a date/time (2003-01-01  18:00:00) response instead of the actual multiple responses the user made. The change I made to the question was to change the "Numbers property from" [ a), b), c) ] to [ 1), 2), 3) ]. This property change did not affect the reported responses for the single response questions, only the multi-response. This problem occured Using Captivate 4. I then tried using the same properties in Captivate 5.5 thinking it was a bug in CP4, but got the same results. Has anyone else run into this issue? I'm going to bring this to the attention of my LMS provider, but want to make sure CP is clean first.
    Thanks,
    Dave

    First things first. I am not an LMS expert, so this is not about troubleshooting.
    However, to ensure that your course works fine on a SCORM-compliant LMS, you can upload it to cloud.scorm.com and test it out. If the course works fine there, rest assured that it will work fine on any SCORM-compliant LMS. If your LMS team comes back with an issue after this, you can counter them with this evidence that the problem is with the LMS and not your course.
    Sreekanth

  • How do I get the Questions to show in the 'View Responses' TAB, and then show up in the Summary Report?

    How do I get the Questions to show in the 'View Responses' TAB, and then show up in the Summary Report?

    There are more than one Applications folders. At the root level of your system is an Applications folder for all users, where most installations go. Every user, including you, also has a separat Applications folder.
    Check all of them.

  • How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9

    I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
    oRptRun=createobject("CrystalRuntime.Application")
    oRptView=thisform.oleRptViewer
    oRptOpen=oRptRun.OpenReport('MyReport.rpt')
    oRptView.ReportSource=oRptOpen
    oRptView.ViewReport
    Inside the MyReport.rpt there is two subreport name :
    1. MySubReport1
    2. MySubReport2
    My Question is :
    How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
    I try to using command :
    oRptRun=createobject("CrystalRuntime.Application")
    oRptView=thisform.oleRptViewer
    oRptOpen=oRptRun.OpenReport('MyReport.rpt')
    oRptSub=oRptOpen.OpenSubreport("MySubReport1")
    oRptSub=oRptOpen.OpenSubreport("MySubReport2")
    oRptView.ReportSource=oRptOpen
    oRptView.ViewReport
    but only show Main Report (view tab name : Preview)?
    Did I miss any command before I call oRptView.ViewReport?

    Your right, there is only one tab to view the report.
    To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
    http://diamond.businessobjects.com/robhorne</a>

  • Re-show the FPGA Successful Compile Report dialog box

    Hi, everyone,
    Could anyone tell me how to re-show the FPGA Successful Compile Report dialog box?
    I clicked the check box "do not show this massage in the future" on the dialog
    It won't show up anymore
    I need to know the accurate onboard clock rates on my FPGA.
    so the "Target specific properties" can not satisfied me...
    Is there anyone know how to solve this question? ~~Thank you

    To reenable the compile report you must modify LabVIEW's INI file. Make sure the line nirviShowCompileReport=TRUE exists in the ini file. Let us know how that works out!
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • Attaching the survey questions and the answers to the Lead

    Hi Experts,
    I am making Lead from the survey based on the rating of the questions. I am successful in doing so but I even need to make an attachment of this survey questions with the answer seleted, to the generated lead.
    I am trying to find a FM which can do this.
    If anybody here can guide me to this will be really helpful.
    Regards,
    SA

    Hi Saurabh
    Maintain the setting for Questionnaire determination through following path
    SAP Implementation Guide Customer Relationship Management Transactions Settings for Leads Questionnaires for Leads  Define Determination for Questionnaires
    Here you will have to maintian only your  lead tarnsaction type with Determaination and valid dates (if reqd). Please note do not maintain any Survey against this entry. This should help you to show the responded Survey in Assessment block in Lead.
    Hope this will help.
    Regards
    Mallikarjun

  • Previewing Pages document in Preview shows page numbers incorrectly

    Previewing Pages (5.2) document in Preview (7.0) shows page numbers incorrectly. Regardless of starting page number preview shows as Page 1.
    Suggestions appreciated...

    That appears to be YABIP5 (Yet Another Bug In Pages 5].
    Pages .09 documents are fine.
    No prizes however for finding bugs in Pages 5/5.2 it's swarming with them.
    Peter

  • PO Amount Not showing up in the S_ALR_87013558 Report

    Hi,
    I have done PR->PO->MIGO->MIRO. but when i try to run the report (S_ALR_87013558).
    The PO amount doesn't shows up in the "Actual" Colum in the report. But when i run the Cost/revenues/expenditure/receipts report (S_ALR_87013531), the PO Amonut is displayed properly as required.
    I am using account assigment category as "W". Is there any steps i am missing?
    Note:-
    I have searched the forum for the same query, but didnt find any sutialbe solution to my query.

    no, i have not created secondary cost elements.
    It is showing properly in the S_ALR_87013531 report. Column name "Act.costs "...the same should be reflected in the S_ALR_87013558 report..but it is not doing so..

  • I need to delete my Apple ID on my iPhone 4.  I forgot my psw for my account.  When I answer the security question, the system responds incorrect answer.  I created a new Apple iTunes account but I still unable to delete the old iTunes account.

    I need to delete my Apple ID on my iPhone 4.  I forgot my psw for my account.  When I answer the security question, the system responds incorrect answer.  I created a new Apple iTunes account but I still unable to delete the old iTunes account.

    AppleFAN7591 wrote:
    I need to delete my Apple ID on my iPhone 4.  I forgot my psw for my account.  When I answer the security question, the system responds incorrect answer.  I created a new Apple iTunes account but I still unable to delete the old iTunes account.
    How to reset your Apple ID password.
    Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
    Verify your date of birth, then click 'Next'.
    You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
    If neither method works, then go to https://getsupport.apple.com
    (If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
    Choose 'More Products & Services', then 'Apple ID'.
    A new page will open.
    Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
    Click the blue 'Continue' button.
    Select the contact option that suits your needs best.
    How to reset your Apple ID security questions.
    Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
    Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
    Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'.  This will generate an automated e-mail that will allow you to reset your security questions.
    If that doesn't work, or  there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
    Next, go to https://getsupport.apple.com
    (If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
    Choose 'More Products & Services', then 'Apple ID'.
    A new page will open.
    Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
    Click the blue 'Continue' button.
    Select the contact option that suits your needs best.

  • Survey Question - Carry over data

    Hi,
    Is there a way to carry over responses/answers from a survey question from one slide to another? I have a scenario where users analyze a situation and note the problems (survey answers - ungraded) on one slide. I don't want them to see the answers to the scenario until the next slide but want them to remember what they've put in as the problems with the scenario. I've searched the forum but didn't see this situation. Thanks very much for any ideas.

    For short answer questions the value of the system variable cpQuizInfoAnswerChoice is the exact text that was entered, which is great news for you I suppose? Be sure to assign the value of that variable to a user variable before the next question is answered. That means that best event to trigger the action is the On Enter event for the next slide. As you perhaps know, there is no On Exit event possible for Question slides.
    http://blog.lilybiri.com/events-and-advanced-actions
    You will have to create an advanced action for that:  Assign v_answer1 with cpQuizInfoAnswerChoice
    And you'll need a different action for each question, even shared actions couldn't help you because a variable (it is the user variable v_answerx that will be different for each action) cannot be a parameter.
    Lilybiri

  • EPM Reports error Incorrect Asymmetric Report

    when running a report in Hyperion 11.1.1.3 Workspace that is connected to an Essbase application I get the following error:
    5200: Error executing query: essbaseserver/App/PlanType//Error(1001058) Incorrect Asymmetric Report, [100] Records Processed
    Where do I begin troubleshooting this issue?

    Hi
    Is the issue happening to specific FR Reports which using Prompts in FR Reports design ?
    Try verify  fiddler trace logs to know what happens in the background. This can be done by installing Fidler from http://www.fiddler2.com/fiddler2/
    regards,
    Harish.

  • Incorrect Asymmetric Report

    i'm trying to run a report comparing data from two cubes. i keep getting the error 5200: Error executing query:.... Incorrect Asymmetric Report.
    any ideas? it works singly, but when i put both cubes it crashes.
    thks

    It sounds like the report is using members which differ between the cubes.
    You can set the report to consolidate assymetric columns using the Data Query Optimization Settings, see the Studio User Guide (fr_user) for more details:
    http://download.oracle.com/docs/cd/E12825_01/nav/portal_4.htm
    Regards, Iain

  • When I go to purchase an item from iTunes the wrong security questions show up so I cannot correctly answer them. What can I do to fix this?

    When I go to purchase an item from iTunes the wrong security questions show up and I cannot answer them accurately. Also it is now locked. How can I unlock my ID and get the correct security questions?

    1)  Apple ID: All about Apple ID security questions
    If necessary
    2)  See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security
    3)  Or Email Here  >  Apple  Support  iTunes Store  Contact

  • Web part created on a subsite for a sharepoint list in another site using sharepoint designer, to show only the subsite's reports. Connection dropping off and showing all the reports

    I crated web parts in the sub-sites (we have about 10 subsites) using sharepoint designer from a main list in another site.  Then used web part to show only the  ubsite's reports - using connection to the main list.  Problem is, the connection
    is dropping off and showing all the reports on the main list that are confidential.  this has happened 3 time lately.  Could someone explain why it happens some times?  I had to fix it by adding the web part again and connecting it
    Thanks, Subathy.

    Hi George,
    If you want to use a top level site "department" list column in all sub-sites, you can go to top level site and create a
    lookup type "Site column" to look up the value from the department list, then all sub-sites can use this lookup type site column created in top level site.
    Thanks 
    Daniel Yang
    TechNet Community Support

  • Survey Builder : Survey question not populate with questionnaire link.

    Dear Friends
    i have created application using SURVEY BUILDER Package application .
    i have two application with same schema .one is my created application :100 and second is Survey Builder pacaskge application 105 ,with no chamge in survey builder application.
    My Questionnaire Link is created but when i put this link into address bar then there is no rection,no question set open in that window.
    Questionnaire Link
    http://178.110.201.231:7777/apex/f?p=100:Q::AAL8:::code:AQDQEIWJAUWVCGGZ
    this is my application question link.
    But if i change application no 100 with survey builder application 105 and submit then survey question open .
    I am confuse where is problem why survey question does not populate with my application 100.
    Please help.
    Thanks

    Did you get your link from "Manage Respondents"?
    I usually get a link like
    http://apex.oracle.com/pls/apex/f?p=67351:Q::ABCD::::
    (this is an example that doesn't point to a real live survey).
    http://178.110.201.231:7777/apex/f?p=105:Q::AAL8:::code:AQDQEIWJAUWVCGGZ
    did not work for me, maybe because of your specific IP:port in the URL. Sometimes the colons ::: create a problem when copying/pasting to email, so I use a service such as is.gd to transform it into a simpler URL like
    http://is.gd/B7hxIl
    Does that help?
    Ben

Maybe you are looking for