Survey specs
How many people can I include in a survey form? I believe it is 500 but I am not qutie sure. I want to be able to review survey results for about 250 - 300 people
If you purchased a basic plan you can collect up to 500 responses per form.
Randy
Similar Messages
-
Job Pricing - Import Market Survey File Specs
I am in the process of importing the market survey data. The import of the survey data does not work. Does anyone have the specs for importing the file? Below is what I have.
Remove all commas from numbers
Salary amounts in full amount (81000)
Remove currency symbols
Never use percent signs
Beaware of the leading zeros
Any suggestions of what people have ran into when trying to import the survey data would be greatly appreaciated.
Thanks!Survey data was missing a key field, which is the Job Level. Need to include Job + Job Level for matching against the Job Catalog.
-
Linux Gaming Hardware Specs Survey
Hi, I'm trying to collect information about Linux gamers hardware specs, if you are interested please take a look at this poll :
http://www.misterpoll.com/polls/521555
Regards, Siavash.iFSS wrote:Answered it, but curious - what are you going to do with the results?
Thanks for feedback. Actually we are going to find a minimum hardware specs requirement for the game engine that one of friends is working on.
Best Regards, Siavash. -
This is a survey to see how many people would like to have a forum where we can post the settings and system specs we have used for a successful overclock with certain cpu's, psu's, motherboards, ram chips, video cards and so forth. Also you current OS, service pacs and final settings that work without have memory errors, constant reboots and overheating problems.
Make sure tha cpu's are correctly identified by name, core and fsb.
Any thoughts gals and guys?There is a overclocking section in the forum, Just start a thread with what you wish other users to post.
Might as well give mine for fun
K7N2-Delta-ILSR
2500+ mobile (133FSB @ 1833Mhz) @ 200FSB X 12 = 2400Mhz
Samsung 3200 512meg X 2 Running 1:1
Innovatek water cooling -
Interop Survey: Which EJB Container is _known_ to work with which RDBMS?
Which EJB Container
have you personally used to successfully deploy entity beans
in combination with which RDBMS Server Product[s]
in a production environment supporting more than just a few users?
EJB Container
.VendorName =
.ProductName =
.ProductVersion =
.ProductLanguage =
.EJB-Spec-Version =
RDBMS Server 1
.VendorName =
.ProductName =
.ProductVersion =
.ProductLanguage =
Did you do multi database update ACID transactions that were managed by the EJB Container (ie CMP not BMP)?
YES
NO
If so, did you do them across more than one RDBMS Server Product, such as mixing DB2 with SQL Server?
YES
NO
RDBMS Server Product 2
.VendorName =
.ProductName =
.ProductVersion =
.ProductLanguage =
I intend to publish the results to this forum by 15 Aug 2005.
Please post any responses until 31 July 2005 so I can consider them in the survey.Tomcat does not support EJB deployment as it is a mere servlet engine. But it can be integrated with with JBoss, an app server which is freely available.
-amit -
Hi,
running 9.0.4.0.99 on windows:
I found that when using a ui template, the survey form portlet won't work: once you press the first 'next' button and it calls the opc_survey_form_portlet.answer procedure you get an error: page cannot be found.
Also if I try to load the procedure answer through 'show properties' under the database provider tab I get the same error: though both spec. and body have status 'valid'
I see more questions regarding survey portlet esp. in combinastion with 9.0.4. has anybody gotten it to work properly yet?
regards
MarianneIf the Studio service looks good on the remote server where Studio is installed (check that
the service is started and look in the Studio logs for any warnings or errors), you should
also verify the configuration settings in the Studio remote server object. Is it properly
configured and pointing to the correct remote server?
If so, check the portal servers access to the Studio server via the port specified in the remote
server (default is 11935). You can test this by doing a telnet test on the portal server. In a cmd
prompt (Windows) or on the CLI (Unix), type 'telnet [studioserver] 11935', where "<servername> is
the name of your Studio remote server. The screen should just go blank, meaning that there is
something accepting connections on that port on the given server. (We would hope it's the Studio
app and not another service occupying that port.) If you get "Could not open connection to the host"
or some such similar result, check that the network between the portal and the Studio remote server
is open (ie, make sure there isn't any port blocking or a firewall in place that would hinder the
communication between the two servers). -
Comment on survey:
Hi to the members of the forum.
I need to give a report to our CPA who is in charge of SOX subject.
The report has to show all the comments which were written in all the Subprocess and control assessments.
Is there other table beside GRPCQANSWER?
I donu2019t know in which table I can find the comments of the assessment itself- not for the lines in the survey but for the all of it and as well the process owner review comments.
Regards and best week,
Alik KerenSee, this is the problem with Apple. They can keep charging stocking fees, because no one knows what the Specs are of the machines, and they can keep saying it's within specs and charge the stocking fee.
Luckily, I never had to pay a restocking fee, and glad you got a refund, but to me, this looks like one big scam. They can keep reselling these machines, make there stocking fees, and still sell the old machines and make a nice healthy profit. -
I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...) -
SPECS FOR NEW MBP HARD DRIVE AND HOW TO INSTALL NEW OS AND USE TIME MACHINE
I need to replace the hard drive in my early-2006 1.83 MacBook Pro (15-inch), because the Genius at the Apple Store told me that I'm getting weird behavior on it due to the drive slowing down and that it won't last much longer.
I have 2 questions:
First, I want to order the drive online and have it installed locally. I will probably get a 320 to 500GB drive. What are the exact other specs I will need to find the right one?
Second, I am currently running 10.5.8 and backing up with Time Machine. I would like to install 10. 6 on the new drive, but don't know how to go about using the Time Machine backup to get all my apps and files running. Can someone describe this procedure for me?
Many thanks!Hi Annie,
You need a 2.5" 9.5mm high SATA HD, either 5400 or 7200RPM. Check out macsales, newegg, amazon to name a few places.
How to restore from a TM backup: http://support.apple.com/kb/ht1427
Prepare your HD by formatting and partitioning it:
1. Boot from install disc (press power button, immediately insert install disc and hold down c key).
2. Select your language.
3. Open Disk Utility from Utilities menu.
4. Select the HD in the left pane (the manufacturer’s name and the HD model number).
5. Click on the Erase tab.
6. Choose the Format: Mac OS Extended (Journaled).
NOTE: if you want to zero the HD (which I always think is a good idea, but does take time), click on Security Options, click the button for Zero Out Data, click OK. The larger the HD, the longer this will take, in some cases several hours.
7. Click on Erase and wait for the entire process to finish.
8. Click the Partition tab.
9. Click on Volume Scheme: and choose the number of partitions (normally just one unless you have other plans).
10. Click on the Options button (located underneath the Volume Scheme pane) and select GUID.
11. Click Apply.
12. Quit Disk Utility and continue with the installation process to install OSX or run Restore from a TM backup; when finished, repair permissions, run updates, repair permissions.
Message was edited by: tjk -
Interaction Centre: Survey not saved correctly
Hi,
We are using SAP CRM 5.0 Interaction Centre. While creating a customer feedback transaction with survey in Interaction Centre, following is the observation:
1. We open the customer feedback transaction, enter the mandate information in the details tab and save the transaction.
2. Then navigate to questionaire tab and fill-in the survey questions and save the survey.
3. Navigate back to details tab and save the transaction. The survey and the transaction are saved correctly. Instead, without navigating back to details tab, when we try to save the transaction from the questionaire tab, neither the survey nor the transaction is saved.
Recently the application was upgraded from SP15 to SP16.
Please provide your inputs in solving this issue.
Thanks in advance.
Regards,
Venkat
Edited by: kvenkat24 on Dec 14, 2010 8:02 AMHi Hongyan Shao,
Thanks for taking your time to answer my issue.
Actually we have two issue in this
1.When users press the End button, ideally, the current screens should be closed and default screen of Accoutn Identification should be shown.
This does not happen.
Actually, nothing happens when users press the End button.
Users cannot click on anything else too and the screen seems to be frozen.
Users have to close the IC session and relogin.
2.And one more issue is when user ends call by click on end button it goes to account identification but Name of the account still be there on top left top side where it shown account name. but it allows agent to take another call and create service ticket.
Please note that we are using CTI( Avaya phone)
Now since these two are an intermittent issues, i do not have reproduction steps.
Thanks and regards,
Teja -
Error in updating object SURVEY
Hi Experts,
The following error occurs not always but very rarely while updating the notes field or while saving an Activity.
SAP Note
The following error text was processed in the system P60:
Error in updating object SURVEY
The error occurred on the application server crmpcs2c_P60_09 and in the work process 6.
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
Function: CRM_SURVEY_UPDATE_DY of program SAPLCRM_SURVEY_DU
Form:CRM_SURVEY_UPDATE_DY of program SAPLCRM_SURVEY_DU
Form:%_UPDATES_NO_UTASK of program SAPMSSY4
Form: LOCAL_UPDATE_TASK of program SAPMSSY4
START-OF-SELECTION of Program SAPMSSY4
Could you help me in this regard.
Thanks in Advance.
I will reward full points to the expert.
Regards,
Madhura.Hi Gervase,
No, but there was an associated dump in the transaction SM13.
Here is the detail:
Function Module: CRM_SURVEY_UPDATE_DU
Status: Update was terminated
Report: LCRM_SURVEY_DUU02
Row: 94
Error details Class: CRM_ORDER_MISC Number: 002
Error in updating object SURVEY
Thanks in Advance.
Regards,
Gabriel. -
Can't move images in Survey mode
I click on a folder and pull up a few images in Survey and am not able to move/re-arrange said images, on other folders it works as it should -- Sometimes it works sometimes it doesn't -- yes, I click on the image itself. Is this a bug?
Did you ever figure this out?
I have the same issue... can't figure out why... -
Can too much RAM memory in a late 2011 model macbook pro lead to kernel panic? That is what I was told by a senior supervisor from apple support who troubleshot this issue.First noticed this problem in Dec 2014 while using a private wifi at a relative's home. Did not occur again until Feb1 using a public wifi at a hotel. Never happened on my private wifi network until last night attempting to use airplay. ( have used airplay before without issue). Late 2011 MacBook Pro running 10.9.5; 2.4 GHz Intel core i7, 16 GB DDR3,AMD Radeon HD 6770m 1024 MB graphic card. The laptop came with 8GB RAM and I installed 8 GB about 2 years ago for some reason I cannot remember... probably because I thought the system was slowing down a little. I know that sounds silly. I do not run multiple programs at a time except I leave 6-8 website tabs open simultaneously. I don't photo or video edit. I would describe my use as "light" based on reading these blogs.I had purchased apple support and spent hours on the phone with them in early Feb moving up through support and senior support to sending logs to the "engineers." Of course lots of things were done some of which I am sorry to report I cannot recall their technical definitions. Deleted 3rd party apps/programs; re-worked start up menu; re-installed operating system; reset " this, that and the other" using acrobatic simultaneous key strokes both in and out of safe mode..Anyway the results from the engineers came back and they suggested that if it happened again I was to remove the 8GB of RAM I had installed as the system was getting confused as to which chip to use.( that is my interpretation of what was said..prob dumbed down for me)...Anyway 1 day after these pronouncements came down I read that Apple had agreed to fix graphics cards in some late model 2011 MBPs. I felt this was unlikely to be the issue given all that had been done including an extended hardware test but called the Senior Support Supervisor I was working with to ask him to make sure. He never phoned me back. Should I go to the trouble of removing 8GB of RAM from my laptop? Of course I will try it as the alternative is a new computer.Blogs read that this model can support 16GB but Apple didn't test for it. Senior Supervisor claims this is my trouble. Does that make sense? Not to me....but it is clear to all my level of knowledge. Can a malfunctioning graphics card be missed by an extended hardware test? I appreciate comments.
The RAM needs specs as shown below.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM -
Adobe Creative Cloud Computer Specs
My office is getting ready to move to Adobe Creative Cloud. I'm currently running CS5 Production Premium. I'm not computer tech savvy, so I'm concerned my current set up will run CC.
Here are my editing PC's specs. Could someone let me know if it is ok in the current configuration to run CC?
Specifically, I had heard initally there was an issue with the nVidia Quatro 4000 card.
Thanks for everyone's help.
HPZ800 Workstation
Windows 7 Professional
Dual Intel Xeon 6 Core
12GB Ram
nVidia Quatro 4000 Graphics Card
If you need any other information, please let me know.See http://www.adobe.com/content/dam/Adobe/en/solutions/broadcasting/pdfs/Adobe-Hardware-Perfo rmance-Whitepaper.pdf
Your card is listed as supported.
You may also wish to post in the Premiere Pro and After Effects forums depending on which software you use the most (maybe both?). -
!!! We Want Design-Specs Of The MEGA LED-displays !!!
Every once in a while someone opens a topic in which he/she askes for a possibility to control the LED display. Some have even sent e-mails to MSI support, only to receive no for an answer. I see no reason why MSI could not release more details about the LED panel, specifically because most of us feel like a bunch of Beta-testers. Hey, we don't even ask for a complete SDK-kit, I think that sufficient knowledge about (hardware)programming is available amongst the users of this forum to make direct use of the design specifications.
Therefore I would ask you to reply to this post to make a general statement towards MSI, and hopefully convince them of releasing the so-wanted data.
JaDi.I think you know that I want this for a long time:
sure I will support you
But unfortunatly I see just two solutions for this problems you won't like:
[list=1]
We program it
We all travel to the Taiwan headquarters and start a hunger strike on front of the main building.[/list=1]
I prefer 1
Second thing: I worte to MSI (germany) for the specs of the LCD and they transfered by to a technician/programmer in Taiwan. After his holiday he told me that he mustn't give any information about it out. This is again one more example of data protection that just blocks every kind of progress. At the moment I AM expecting an SDK. I won't spend my whole free time to do THEIR job - well and if I do - I'm sure I will charge. I've seen this trouble with the girder plugin which was very very little work compared with an LCD control - enough is enough
Why should anybody of us HELP MSI do make their products more attractive? That's what it's really all about.
Regards
Nathan
Maybe you are looking for
-
I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Mavericks for everything but the dictation software. I'm a newbie to apple
-
Table-Header to Excel-Header (Kopfzeile)
Hi, I defined a Header-Text using cl_salv_wd_header. I expecetd to see it in corresponding Excel-Header (Kopfzeile) after export, but i can't see this text anywhere. How can I export it to Excel? Thanks for tipps. Berti
-
Connection manager documentation
I'm having trouble finding some good documentation on Oracle Connection Manager, can anybody point me in the right direction. I'm looking in to how it might be used to proxy SQLnet in order to satisfy firewall requirements, and I'm at the stage of wh
-
"Bad handshake" error with MySQL
Hello, I'm having problems when I try to connect to DB using MySQL 4.1.1alpha. I have Conector/J 3.1 and Connector/ODBC 3.51. The exceptions occur when I try to connect with the sentence: conection = DriverManager.getConnection("jdbc:mysql://localhos
-
If I duplicate the browser (permission) set how do you add the ability to export for users in that group? I'm looking at the Trait Permissions and nothing obvious jumps out. In short - Where do we control the ability to permit/deny Export? Also is it