Surveys Text not saved

Hello All,
After creating a survey using CRM_SURVEY_SUITE, texts are not been saved in table CRM_SVY_RE_ANSW. Even when we've activated the questionarie several times and applied SAP Note # 1057321.
Any suggestions?
Thanks in advance.
Marisa

Hi Marisa,
Please Check for the Survey has been Generated(CTRL+F2) Properly or Not,
After Activating the Survey you shall select the Following Option for Successfull generation of the Survey.
Else Try Editing the Survey form by making Some small change in the Header and Activate the Same again,It should get Activated and your Survey answers should get Saved.
Also Ensure in Settings in Survey (CTRL+F12) you have Selected the CheckBox for "Save Completed Surveys" in the Technical Settings Tab.
Hope it Answers your Queries...
Revert Back for Further Doubts..
Thanks and Regards,
RK.

Similar Messages

Text not saving properly in Acrobat Pro XI

I use Adobe Acrobat XI Pro. When I use the add text function, everything shows up correctly. I save the file and close it. Later on, when I open the saved file, some of the text (especially capital letters and symbols) show up as little boxes with an X in them. I have to highlight, cut, and paste everything in order for the text to show back up. Once it happens one time, it usually does not happen again. However, if I open up a document, fix the boxes, add additional notes, those notes then turn into boxed Xs the next time I open the document.
How do I fix this?

Hi rdh2209,
Is Acrobat 11 updated to the latest patch v11.0.09?
Does this happen with any specific font?
Try repairing Acrobat and check if it resolves the problem.
Regards,
Rave

Why is my text not saving correctly in Acrobat Pro XI?

I use Adobe Acrobat XI Pro. When I use the add text function, everything shows up correctly. I save the file and close it. Later on, when I open the saved file, some of the text (especially capital letters and symbols) show up as little boxes with an X in them. I have to highlight, cut, and paste everything in order for the text to show back up. Once it happens one time, it usually does not happen again. However, if I open up a document, fix the boxes, add additional notes, those notes then turn into boxed Xs the next time I open the document.
How do I fix this?

Hi rdh2209,
Kindly post this query in Acrobat forums:Acrobat
Regards,
Florence

Survey questionaire not saved

Hi,
We are using SAP CRM 5.0 Interaction Centre. While creating a customer feedback transaction with survey in Interaction Centre, following is the observation:
1. We open the customer feedback transaction, enter the mandate information in the details tab and save the transaction.
2. Then navigate to questionaire tab and fill-in the survey questions and save the survey.
3. Navigate back to details tab and save the transaction. The survey and the transaction are saved correctly. Instead, without navigating back to details tab, when we try to save the transaction from the questionaire tab, neither the survey nor the transaction is saved.
Recently the application was upgraded from SP15 to SP16.
Please provide your inputs in solving this issue.
Thanks in advance.
Regards,
Venkat

a bug. rare but happens

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

Text fields populated from lov mapping are not saved to database

Hi Everyone,
I'm having a wierd problem. My requirement is to autopopulate two text fields field 2 and field 3 when a value is selected from lov in field1 and save all the values to database on click of a submit button.
Using lov mapping i'm able to populate field 2 and field 3 with corresponding values based on the value selected in field1. And also field2 and field3 should be in the readonly mode so that user cannot change the value.
So to make the fields readonly i have changed the property of readonly to true for field2 and field3. But if I change the readonly property, the values for field2 and field3 are not being saved to database.
The values are getting saved to database only when readonly = true for messageTextInput item type or if the item type is a form value.
I also tried disable = true, which also didnt work.
I tried to debug by writing some sop statements in PFR, but these statements also returned null for pageContext.getParameter("field2") etc;
Can anyone please tell me how to solve this problem?
Thanks
Sunny

Hi Gyan,
I forgot to mention that , I also tried messageStyledText. Which also didn't work. I wanted to use vo.setAttribute as my last option, but i wanted to understand why the values are not saved to database when the text item is showing the values on the page.
Thanks
Sunny

Pc suite restore not saving names for text message...

Hi, I have a nokia N95 and recently got the N95 8gb. I backed up everything from my original N95 using pc suite and then restored onto my new handset and i found that it has done everything except it has not saved the names with the text messages, just the numbers. The names are in the phone book and aren't duplicated. It has saved names for the my picture messages just not text messages. I am finding it really annoying!! I hope someone is able to solve this for me! Thanks

You can try to restore category by category: phonebook first then the text messages. I'm not sure if it works. But it seems to be caused by the wrong order of restore.
What's the law of the jungle?

I have recently purchased the new iPad and I am having difficulties with draft emails not saving. Either it saves some of the added text or it saves none of it. Any suggestions, thanks?

I have recently purchased the new iPad. I can send and receive e-mails (iCloud) without a problem but the draft function does not seem to be working. Specifically, when you go back to work on a draft e-mail, it has not saved the changes you made previously. Kinda annoying! I think it must be a problem specific to my iPad as my iPhone does not have this problem. All suggestions as to solutions very welcome.

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

My blends in Illustrator CS4 are not saving or printing correctly. Why?

Why are my blends in Illustrator CS4 not saving or printing correctly???
SPECS:
Adobe CS4
MAC 10.5.8
I got a outlined Text blend with a drop shadow. And another text with a drop shadow on top. Not too complex at all.
Heres some screenshots of the problem.
(1) Adobe Illustrator Screenshot
(1) Screenshot of my saved TIff file. I saved as a PDF as well and still no luck.
Any suggestions?

Mylenium,
Thanks for you time and suggestions! You helped alot! My layers panel was crazy. I re-arranged, re-organized and stacked according to the graphic. Solved my problem first try. Not used to making sure the order is right in illustrator, only in photoshop.
Thanks again man!
-NightRed

Hyperlinks not saved correctly in PDF and Excel

Hi,
I have a few reports with hyperlinks to other reports that contain multiple input parameters, which makes the links very long. ( greater than 400 characters )
When the reports are saved as excel, I am unable to invoke the child report on clicking the link as the link is not saved entirely ( can see that when i try to edit the hyperlink in excel ). Therefore the child report opens but prompts for inputs as not all the inputs are passed
When saved as pdf, the link is not saved correctly and i cannot invoke the child report at all
Please can you suggest a solution/workaround? Alternately is it possible to disable the hyperlinks when saved as excel/pdf?
Regards
Sameer

Hello,
I think this is a limitation in Excel where URL syntax has to be 255 characters or less
In order to prove that it's coming from excel and not BO, try in excel to create a false hyperlink which contains more than 255 characters.
A workaround might be to modify the cell as text and will not be recognized as a URL. So you should get it entirely.
Please let me know if it helps you
Regards,
Philippe

Photos not saving to camera roll - iphone 5s

I upgraded to the Iphone 5s from 4s now photos are not saved to the camera roll. Took it to the Genius bar and they restored to factory settings, same problem but they later did a "deep restore" and it worked. When they restored my data, it broke the camera roll again. The only soultion seems to be to "start over". But this is not acceptable. How can I transfer some of the app data (texts, voicemails, and select apps) to the new phone?
Alternatively, how can I "fix" the camera roll?
Some hints: There is a folder in DCIM folder (when viewed with the app iExplorer) called 101APPLE that contains 49 phots and 2 movies from 2010 that I CANNOT delete. Iphoto wont delete them, they wont delete from the phone UI, and they cant be delete with iExplorer - in all cases it SEEMS like they delete then pop right back in!!

The only way photos would go to the camera roll would be if you restored the 5S from an older backup. If you transfered these photos via iTunes sync, they do not go into the camera roll.

FACT SHEET Configuration not saving in transport to move to QA system

hi Experts
I am setting up the Account Fact Sheet BP_ACCOUNT_FS for my users and the only configuration that is saving is the configuration of the layout of the fact sheet to a transport. The actual settings or configuration within the fact sheet is not saving. For example, I used a BI report and added my query and parameter and while this saves in our development box, this will not save in the transport to move up through the systems.
Any thoughts? I already have a message open with SAP but checking to see if anyone has an immediate solution.
Thanks,
Chris

Hi,
P-table is an time independent attribute table ie it contains all the attribute info. in that table. so when u added a characteristic to that infoobject, u can find that entry in the P-table.
Also M is a view on P & Q tables. It is not a table.
T- ie Text table will contain only short,medium and long texts related to that info object.
so when u add a characteristic to infoobject it will be refelcted in P-table or Q- only. Not in Text tables.
Narendra Reddy

Save as text not working

When I try to save a PDF as text, my document is empty. Also, it appears I only have the option of saving as accessible text, not plain text. I am using the latest version (8.1.2). Anyone able to do this successfully?

I have found this does work, but only with Acrobat Pro. You must use save as, accessable text (plain text doesnt work with the document that I have been using).
I have tried the SAVE AS TEXT option with Adobe Reader, versions 6, 7 & 8. I wonder why that option is even available.

Why SQL queries are not saving in agentry editor for first publish?

Hello Experts,
In the process of developing an agentry application i have defined SQL steps and saved in agentry editor with out any errors .When i have published definations for first time it is displaying error 'Invalid object some where' in back end SQL log file ,when i have seen in editor some times the query is not saved,some times even it is defined then also the same error.So i have copied the steps and saved again.Now i have done a publish,it is working fine.This is happening only when i implement exchange mechanism(Showing error in ATE getfetch error).But with out exchange mechanism it is working fine.Is this related to the installation of editor plig-in is not correct?. I have done preferences setting in my workspace correctly.
Help me in this regared.Thanks in advance.
Thanks & Regard,
Sravanthi Polu

Sravanthi,
For your error: displaying error 'Invalid object some where' in back end SQL log file.. This is happening only when i implement exchange mechanism(Showing error in ATE getfetch error)
Two suggestions (My best suggestion is item 2 below - I think that is where you have the error)
Item 1: Are you using the right encoding? In your Eclipse Editor under the main menu Windows - Preference -> General -> Workspace. What is your Text file encoding set to? Cp1252? Try setting it to UTF-16.
There is a tutorial about this in:
https://service.sap.com/sap/bc/bsp/spn/esa_redirect/index.htm?gotocourse=X&courseid=70246375 (Enterprise Academy classes). The course is really a simple < 5 minutes discussion on different types of encoding and why they exist and how to change the Eclipse to what you wanted. SQL is normally done in UTF-16 for 16 bit.
I am assuming that the encoding could be wrong.
Item 2: Another thing that could be wrong is how you specify the SDML (Flunky code).
In your SQL Script: Anything that has the "<<" and ">>" open and close marker is an SDML (Data Markup Language) and needs to be pre-populated before the Agentry Server submits your SQL query to the backend. In essence, this is use to populate the SQL query with predefine information like your userID or location and when the SQL gets process it will populate the script with the correct information.
So if you are not properly using the flunky (ex: <<object.address>> where address is not a key ID in a Fetch step (Check manual for usage of SDML AgentryLanguageReference_6.0.0.0.pdf) then you may get invalid object.
When you do a SQL "Fetch" Client Exchange and Server Exchange Steps, you can select a few options:
For this discussion let us talk about these 2 items below.
1. Run Attribute: Run One Time
or
2. Run Attribute: Run Once Per Object.
When you select Run Once Per Object the only available Flunky or SDML commands you have are:
object.keyPropertyName
lastUpdate
fetch.messageNumber
The 3 above are your only options
If you try to do something like object.property1 where property1 is part of your object properties then it will not work for Run Once Per Object.
It may work for Run One time as fetch.propertyname.
From your symptoms where you are complaining about an issue in exchange steps, your error is a typo or a misused or a misunderstanding of how fetches and SDML works (documented in page 398 or 399 of AgentryLanguageReference_6.0.0.0.pdf).
See pictures just in case you don't have access to that pdf file (The picture below simply proves what SDML options is available for your Fetch Client Exchange Step).
Hope this helps.
Regards,
Mark Pe
SAP Senior Product Support Engineer

Why is the text not the visible in the protected PDF opened on Mac?

Long story short:
I've created a document in Microsoft Word 2010 and saved it as PDF. With the .pdf open now in Acrobat Reader 9.4.1 I have enabled the protection over the .pdf file by only allowing Printing and saved the protected .pdf. All of these actions are made on Windows 7 machine. Now when trying to open the protected .pdf on Mac (with Snow Leopard 10.6.6 and Preview) the .pdf opened only shows the lines and bullets but not the text.
Why is the text not visible in the protected PDF opened on Mac?
(is this bug or a "feature"?)
Note: the protected .pdf looks good on Windows 7 and it works on Mac if the .pdf has no protection.
Thanks!

A. What application are you using to add the protection? Reader cannot add any file security and I don't think the PDF feature of Word will either.
B. Mac Preview has issues with PDF standards so there may be some features that you will experience issues with that have no workarounds.
C. Have you checked the file after adding security to see if all fonts are embedded?

Surveys Text not saved

Similar Messages

Maybe you are looking for