SUS Error :- BBP_BUPA:048

Hello SRM Expert,
We are in the phase of implementing SUS (EBP SUS scenario) and facing two below error.
1. While replicating companies and employee to vendor portal (from EBP to SUS) by transaction BBP_SP_COMP_INI we are getting the below error in SXMB_MONI (in SUS)
"An error occured within an XI interface: Exception occurred E:BBP_BUPA:048 -Error while creating organizational unit; inform system admin. Programm:"
2. The PO transfer from EBP to XI successfully but in SUS it comes with the below error in sxmb_moni transaction (XML PO).
"An error occured within an XI interface: Exception occurred E:BBP_PD:147 -Enter a country for partner 9000000141 with type 'Sold-to Party' ."
Any help in this regard is highly appreciated.
Thanks,
Jain

Hi
Refer these OSS notes.
Note 806361 - Partner ID of the sold-to party in the SUS-MM scenario
Note 1027493 Replicating suppliers from R/3 to SRM-SUS
Note 754356 - SUS-XI: Current SUS message mapping
Note 1031070 Supplier cannot be registered
1003820 Supplier cannot be registered
982871 Consulting services: supplier integration in SRM
949177 SRM-SUS 3.0: Region is missing in the partner address
887348 SRMSUS: FAQ for error analysis and logging OSS tickets
868192 Consulting solution: SUS-MM (SUS-MMSRV) service procurement
885710 Display "Several" in the partner overview
884695 Configuration of several integration scenarios
852976 SUS3.0: Error in XI Mapping for Delivery Terms
621575 SRM-SUS: Mappint MM->SUS for vendors is missing
562218 SRM-SUS: Invalid path specifications in mapping
586458 SRM-SUS: Mapping SUS-MM vendor master
581786 SRM-SUS: Mapping SUS-MM ERS invoice not correct
Regards
- Atul

Similar Messages

Vendor Master Replication Error from ECC to SUS : Error in ALE Service

Dear Experts,
We are implementing MM SUS (SRM 5.0). As a part of this we need to replicate vendors from ECC to SUS system via XI. We have created a Reduced Message Type Z_CREMAS_SUSMM and had set up the partner profile in WE20 with SUS logical system as destination and specifing the Message Type, and port of the XI system
We executed the transaction BD14 for replication, it is resulting in error 29 : Error in ALE Service : Entry in Outbound table not found.
Please provide inputs to overcome this problem
Thank you,
Regards,
Ravi

Hi,
Check
Re: Idoc Error Status "Entry in outbound table not found "
Looks like some issue with the partner profile set up for the sender or receiver of the EDI message in WE20.
Set up them again and When these have been set up try reprocessing your IDocs from BD87

SUS Error

Hello SRM Expert,
We are in the phase of implementing SUS (EBP SUS scenario). We are able to transfer PO from EBP to XI successfully but in SUS it comes with the below error in sxmb_moni transaction "XML PO).
"An error occured within an XI interface: SLD system QXECLNT200 is not known Programm: SAPLBBP_BD_MAPPING_SAPXML1; Include: ; Line: 0 "
Any help in this regard is highly appreciated.
Thanks,
Jain

Thanks Ramki,
Backend system has been defined in the activity (in SUS system) for the SUS instance (Only one entry for SUS sytem)
SRM Server->Technical baisc setting->define backend system .
Thanks,

SUS - Error with duplicated company

Hi all,
We are implementing an MM-SUS scenario without EBP.
I am having a problem with companies created as business partner in SUS. I did an initial replication of companies using transaction BBP_SUS_BP_ADMIN functionality "Business Partner as Company Code". I then found out I had made a mistake with a particular company and decided to manually delete the Business Partner for that company and create it again. The problem I am having is that the system seems to keep looking for the old business partner when transfering purchase orders from R/3 to SUS, and does not look for the new one.
I keep getting the following error when transfering purchase orders related to this company number:
Exception occurredA:BBP_PD:004 -Partner XX20 not found E:BBP_PD:147 -Enter a country for partner XX20 with type 'Sold-to Party'
The rest of companies are working perfectly well. Can someone please help me?

Hi,
Pls see the foll notes:
987569(Very much related to the error you are getting)
804317
982822
BR,
Disha.
Pls reward points for useful answers.

SUS - ERROR: CRM_ORDER_READ

In the transfer of idoc from the R/3 system to system SUS (Supplier Self Service) through Exchange Infrastructure a following verification error in the transaction sxmb_moni on the SUS.
Inside of an interface XI has taken place one error: CRM_ORDER_READ-> Document not characterized
Not further detailed information exists
Message was edited by: umberto orazzo

Hi Carl,
Have you checked any exception through by FM
FM has following exceptions
DOCUMENT_NOT_FOUND
ERROR_OCCURRED
DOCUMENT_LOCKED
NO_CHANGE_AUTHORITY
NO_DISPLAY_AUTHORITY
NO_CHANGE_ALLOWED
Thanks & Regards,
Arun

Error in company SUS - BBP_BUPA:263

We have SRM 5.0 ECS and ECC 6.0.
We handle scenarios SRM-SUS and MM-SUS
When shipment a PO of MM to HIS the IDOC is processed correctly, but in SUS not, in trx SXI_MONITOR I find an error:
BBP_BUPA:263 -Ordering party has to be a company
I define the companies (the same company code) from SRM to SUS and from MM to SUS and the error persist.
When complement the data in trx PPOMA_BBP the system sends the error:
Company code 126 in system RQACLNT350 is already assigned to Vitro Vidrio y Cristal, S.A.
But any registries have this company code.
Where I can visualize the registries?

Hi,
Can you explain how you solved the problem?
Regards,
Jose Neves

SUS Vendor Replication Error (CL_BBPX_TRADING_PARTNER_SUS_IN)

Hi SRM Gurus!
We are in the process of replicating our SRM vendors to SUS via XI and we are encountering some error. After running tcode BBP_SUPP_INI, we checked tcode SXMB_MONI in SUS and we found 2 flags, one is checkered (processed successfully) and the other is red (system error). We checked the trace of the XML file and we found this error:
<FAULT_TEXT>An error occured within an XI interface: Exception occurredE:00:282 -The password must contain at least 1 special characters E:BBP_BUPA:060 -Error while trying to create contact person. Inform system administration Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
The same error is shown in transaction SLG1. (The password must contain at least 1 special characters)
We are wondering which password is the system checking? The password of PIAPPLUSER, the XI service user processing the transaction already contains a special character and we do not know of any other user that the system may be calling.
We hope anyone could shed light in this issue. We are in SRM 5.5 SP13, PI 7.0.
Thanks in advance!

Hi
assume that you have replicated vendors to sus. how the supplier to acess your SUS browser?
check with basis person ? what profile he maintained to create a pasword ?
SAP Note 1003820 - Supplier cannot be registered
Symptom
After you replicate a supplier in SRM-SUS, the supplier receives an e-mail
that contains the registration ID. When the supplier attempts to use the
logon link to register, the system displays the error message stating that
the registration ID is not valid, and the supplier cannot be registered.SAP Note 880735 - UME/SUS: error with administrational
user creation
br
muthu

PO error in SUS-MM Scenario

We are implementing SUS-MM scenario. A purchase order is created in R/3 and sent over to SUS. When it comes to SUS it errors out with the following error. The Business partner it is looking for is company code. Which is there in the system.
any ideas how to resolve this?
An error occured within an XI interface: Exception occurredA:BBP_PD:004 -Partner 000000xxxx not found E:BBP_PD:147 -Enter a country for partner 000000xxxx with type 'Sold-to Party' W:BBP_PD:649 -Delvery date is in the past; check the entry Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57
Message was edited by:
jai bh

Hi
Which SUS version are you using ?
Please refer to the SAP OSS Note below ->
Note 982822 - PO Inbound in SUS with error BBP_PD 147
Prerequisites to SAP OSS Note - 982822
Note 733294 SUS local service agent in PO Response does not work
Note 739359 SRM 4.0 dump when processing contact person from XML
Note 751143 SUS: PO with service agent cannot be sent to SUS
Note 761879 SUS-MM: PO with teleph. number/e-mail does not arrive in SUS
Note 784386 SRM-SUS: Error E:BBP_PD:537. Order is not created.
Note 786566 SUS-MM: Address cannot be printed in the SUS
Other related SAP OSS Notes ->
Note 987569 SRM 5.0: ASN and SUSPO mapping corrections
Note 804317 - SRM40/SUS/PO: PO inbound with error BBP_PD 147
Do let me know.
Regards
- Atul

Runtime Error when creating SUS user

Hi All,
I started configuring SUS demo for my client, but when i created user with role "SAP_BC_BASIS_MONITORING" and "SAP_EC_SUS_ADMIN_VENDOR",
i am getting:
Runtime Errors: DBIF_RSQL_INVALID_REQUEST
Short text: Invalid call of database interface.
Do i need to configure anything before creating SUS users with this roles? Please help me?
Regards,
Ravi
Message was edited by:
Ravi Varma Nadimpalli

Hi
Which SUS Verson are you using ? Are you using SUS on the same system, where EBP is installed ?
You can create users and assign role to respective users in SUS for creating
Bids in Bidding starting form SUS. But you must replicate users from SUS to EBP.
Then only systems will identify each other while logging.
Meanwhile, Please go thrugh the following pointers and SAP OSS Notes ->
Re: Clarifications on EBP-SUS and MM-SUS Scenario
Note 893714 - SUS30: Replication of bidding users from SUS to EBP
Related Notes
1060329 - Mandatory check of form of address during user creation SUS
895217 - SUS30: SUS not integrated with CUA currently
880735 - UME/SUS: error with administrational user creation
779658 - SRM40/SUS/BP: Error during change of employee
Note 778483 - SRM-SUS: Force a user to change password on initial logon
Note 1060329 - Mandatory check of form of address during user creation SUS
Note 946159 - SRM-SUS 4.0: Termination when users are created
Regards
- Atul

ERS Invoice Error from MM to SUS

Hi,
I am getting the following error when posting Invoice from MM to SUS:
I am getting this error in SUS client, we are on SRM550, SP10 and on idependent clients for SUS, EBP and MM.
Error Message:
An error occured within an XI interface: Exception occurredE:BBP_TAX:013 -Not possible to calculate tax I:R5:553 -'Different country' field contents deleted because identical to 'Country' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BBP_TAX:005 -Error in parameter transfer E:BS:013 -System status INCM is active (SUS Invoice 5000000087) Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002;
We tried with note No. 888952, but the error persists for Tax and parameter transfer. We need note or any further inputs to correct this errors in SUS. We are using Tax calculations from Backend.
Your inputs will be highly appreciated.....
Regards,
Mohan

Hi
Which SUS and R/3 versions are you using ?
Please go through the links/pointers, which will definitely help ->
Refer SAP OSS Note number 806361
Re: invoice in sus
ERS- Evaluated Receipt settlement
R/3-XI-SUS
Error Sending SRM PO Change to SUS-Different Country field contents deleted
Purchase Order Response in SRM from R/3 through XI
Automatic Entry of purchase order Response
Enter a country for partner with type 'Sold-to Party'
Re: SRM-XI-SUS
Do let me know.
Regards
- Atul

Errors:Error in parameter transfer

Hii
I am very new to SAP and SRM as well. I am doing a scenario in which R/3 backend system that is SAPSRM5 system will SAPSRM SUS is communicating for PO to INVOICE. I done everything that is PO is reaching from R/3 to SUS and confirmation and ASN from SUS to R/3 backend system. These connection is fine.
When I am creating Invoice and sending it ro R/3 then it is Showing me two errors:-
Errors:Error in parameter transfer ( Item XXX )
Errors:System status INCM is active (SUS Invoice XXXXXXXXXX)
Can anyone tell me why these errors are coming and how to avoid these error.
please reply soon
its urgent
Thanks in advance
Regards
Sami

Hi
Which SRM version are you using ?
Please go through the following SAP OSS Notes, which will definitely help ->
Note 1080762 - Held incomplete bids hold up closing of the RFx
Note 753255 - SRM40-SUS: Invoice > "Error in parameter transfer"
Note 731037 - Converting SUS 1.0 and SUS 2.0 documents to SUS 3.0
Note 954973 - SRM 5.0 SP-Stack 05 (07/2006) (SAPKIBKT05): Release/Info Not
Related Notes
Note 895217 - SUS30: SUS not integrated with CUA currently
Note 825820 - SRM40-SUS: Follow-on error when converting purchase orders
Note 782482 - Document texts are missing after conversion to SUS 3.0
Note 878678 - SUS30: SUS order can not be processed after 'Hold' action
Note 831493 - SRM40-SUS: Error in Change PO for a held purchase order (2)
Note 731037 - Converting SUS 1.0 and SUS 2.0 documents to SUS 3.0
Note 669742 - Held bids of completed bid invitations
Note 505805 - EBP: Invoice and account assignment
Do let me know.
Regards
- Atul

ITunes 11.3 failing to load in 10.6 SUS

Is anyone else having trouble adding iTunes 11.3 to a Snow Leopard SUS? I believe it may be similar to the problem reported in this thread (and perhaps the fix is similar to electromojo's fix in the thread):
Why am I getting errors for swupd_syncd of Product ID: "091-7360" (Java Update)
If I look in these folders where the two sets of iTunes 11.3 dist and package files should be:
     /var/db/swupd/html/content/downloads/61/24/zzzz031-01973/tzufb9rm3yjshv7sx7kfz1 0jklzs4k6o39
     /var/db/swupd/html/content/downloads/07/07/zzzz031-01974/6t442m0ma4fabjgjqs9z1u os5lp6nbcwuw
I only see the files:
     iTunesXPatch.smd
     iTunesXPatch.smd.previous
and nothing else. Not surprisingly the SUS error log shows this when a client who needs the 11.3 update tries to grab it:
[Tue Jul 29 17:18:11 2014] [error] [client 192.168.46.125] File does not exist: /var/db/swupd/html/content/downloads/07/07/zzzz031-01974/6t442m0ma4fabjgjqs9z1u os5lp6nbcwuw/031-01974.English.dist
Again, maybe the fix is simply to give SUS a little push by manually creating a directory in there. However, looking at the files in a 10.5 SUS for comparison, I don't see any directories, only files, so I don't know what to try to create.
Any thoughts? Thx,
Fred

I am having the same problem. I have not been able to access the iTunes store for a couple months. I have no problem with my Internet connection and I have the latest version of iTunes 10.4.1 in Windows 7. When I begin to load the iTunes store I get nothing, not even an error message.

Vendor registration

Hi experts
After vendor replication from EBP to SUS an e-mail notification is sent to vendor with a URL, USER and Pass, when vendor goes to URL and do the registration and try to create an error occur, CALL FUNCTION NOR EXECUTABLE, INCORRECT PARAMETER
Someone knows what is the solution for it?
Thanks
Nilson

Hi
Did you replicate the company code from Txn BBP_SUS_BP_ADM ? Did you see the option to replicate company code ? One you replicate the company code, it inserts a node in PPOMA_BBP. You can check the companies there. You do not maintain them directly.
See related links ->
Note 361829 EBP (BBP2.0C): Business partner <-> vendor mapping
Urgent - SUS with multiple company scenario
Urgent - SUS with multiple company scenario
Re: URL for vendor self registration without SUS
Send vendor to SUS (EBP-SUS)
Re: Vendor replication in MM-EBP-SUS Scenario
User's vendor in SUS
SUS - Error with duplicated company
In SUS Link between registered User ID and Business Partner (Vendor) Number
Re: Vendor replication to SUS
"Business Partner Does Not Exist" SUS admin user registration
Re: Clarifications on EBP-SUS and MM-SUS Scenario
Hope this will definitely . Do let me know.
Regards
- Atul

Archivo corrupto Illustrator

Ayer a las mil me fui a la cama dejando un trabajo casi liquidado en Illustrator. Hoy, cuando lo intento abrir, me dice "No se puede abrir la ilustración. No se puede completar la operación solicitada". Lo he probado en otro equipo y ocurre lo mismo, así que lo doy por perdido*.
El caso es que photoshop esi que abre el archivo. Me imagino que es porque el pdf que genera illustrator al guardar no está corrupto. Así que lo que querría saber es si hay alguna forma de sacar los vectores de ese pdf.
Sistema operativo: Windows Xp sp2
Illustrator CS2
* Os recuerdo, amigos de esta comunidad, que Adobe reconoce sus errores en Illustrator y la falta de soporte en el paquete en castellano, y que si se lo notificáis os mandan otro illustrator en Inglés, el cuál muy posiblemente tenga que instalar para ver si rescato el archivo de marras, lo que querría decir que es un nuevo error del paquete en castellano.

Jijijjij!!!
Lo que pasa es que yo vivo en la tierra del nunca jamas!!! tenemos restricciones para todo, los pobres cristianos no tenemos acceso a moneda extranjera solo 3000$ al año y 4000 $ si sales de Venezuela, asi que nos queda comprar a comerciantes que obtienen $ del gobierno a un precio controlado y ellos les ganan en $ mas del 60% y si les sumas los impuestos pues a llorar!!!
Eso es algo que yo nunca he entendido, como es posible que en los paises de Latino America, los equipos, las licencias sean de un 40% a 200% mas costoso que en USA y Europa, y al final tengamos que cobrar menos por nuestro trabajo!!! aun invirtiendo mas!!!, espero que las empresas se sumen poco a poco a la filosofia de venta de la Dell...

ROS. organizative unit 00000000 doesn't exist, check your entry

Hi,
When the purchaser director (for example) is completing the business partner to vendor and choose any purchasing organization the message BBP_BUPA034 appear.
The error is being showed in BBP_VENDOR_CREATE_F01
We are running SRMSERVER550 SP 6
Anybody knows how I can solve this??
thanks and regards
Jorge

Hi
Please go through this ->
When you read the content of this chapter, you expect that users replicated from SUS to EBP (so-called user-snychronization) are integrated in the corresponding organization for the vendor. Until Support Package SP08, only the SU01-user is created in EBP after replication, nothing more, there is no automatical complete synchronization for the users between SUS and EBP, the corresponding document is wrong with regard to this aspect. Users can only be replicated from SUS to EBP as SU01-users. Even when one tries to use transaction 'USERS_GEN', option 4: 'Create Users from Existing SU01 Users : You can select the users that you wish to assign to an organizational unit.', the bidding user still is not complete and will receive an error message when he logs on to the EBP application.
[ Refer Note 893714 - SUS30: Replication of bidding users from SUS to EBP ]
Related Notes
Note 895217 - SUS30: SUS not integrated with CUA currently
Note 880735 - UME/SUS: error with administrational user creation
Note 779658 - SRM40/SUS/BP: Error during change of employee
Note 783227 - SRM40/SUS/BP: Migration - Settings not converted
The supplier settings (for example, e-mail notification) are not converted if you execute conversion report BBP_SUS_BUPA_MIGRATION.
Note 777503 - SRM40/SUS/BP: Organizational data in settings disappears
Note 723610 - SUS 3.0: Portal Integration doesn't work
Hope this will help.
Regards
- Atul

SUS Error :- BBP_BUPA:048

Similar Messages

Maybe you are looking for