SUS - MM Scenario: notification mail not sent to all Supplier Users

Hi,
we're in a SUS-MM scenario and we publish Purchasing documents (PO and/or SAR) to SUS portal.
The notification mail for new published documents are sent only to the e-mail address of the Supplier (imported from SAP to SUS) which is in the SAP Supplier Master data. But if the Admin supplier creates other users for the supplier (F1 / F2 / F3), the notification mail for new published PO/SAR are not sent to the mail address of F1 / F2 / F3 users. Is it the standard behavior or is there some missing customizing setting missing?
Our customer wants that notification mail are sent to all the mail addresses of the Supplier Users.
Has someone had this kind of requirement? and, if it is not achievable via standard customizing, which could be the right solution to meet this requirement?
Thanks in advance

Hi,
This is a standard SAP process which SAP has provided,
The other way is to develop a custom program,
1) Select the Supplier.
2) Check the available contact persons of the Supplier.
3) When a document is created in ECC (Hope you are in MM-SUS), select the list of contact persons for Supplier. (I assume need a RFC FM to develop to SUS)
4) Send a e-mail to all users linked with this Supplier.
You can find the linked Contact persons in BP transaction and Table BUT000.
Please change the Status of the Issue once your problem solved, other will get benefitted. If possible post the soulution.
Thank you,
Anil

Similar Messages

  • Workflow notification mailer not starting after APPS pwd change

    Workflow notification mailer not starting after APPS pwd change
    The error in the WFMAILER log is
    [appprod@nalinoes04 ABPROD_nalinoes04]$ cat WFMAILER1300061.txt
    wferr:
    - WFXXX_DB_CONNECT CODE=1017 CONNECT=APPS
    cpid=1300061, logfile=/abprod/comn/admin/log/ABPROD_nalinoes04/WFMAILER1300061.txtparams=, status=Running, debuglevel= Error Done.[appprod@nalinoes04
    Can you please advice ?
    EBS 11.5.10.2
    DB 11.2.0.1                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    There is no upgrade, just a usual APPS password changeYou still need to bounce the application services.
    The error you have posted above does not tell much about the issue. Please clear the log file, reproduce the issue, and check the log file then.The FNDCPGSC log file
    [Oct 23, 2012 12:42:42 PM CDT]:1351014162195:Thread[BES Dispatch Thread,5,main]:0:-1:nalinoes05:172.25.80.54:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-1327162 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 115.76 2004/07/27 17:30:17 kkapur ship $ @16720915 {oracle.apps.fnd.profiles.ExtendedProfileStore@9980d5}],mUniqueId=SVC-GSM-WFMLRSVC-1327162,mLevel=4}, oracle.jdbc.driver.OracleConnection@76ab2f, 10006, DEACTIVATED_SYSTEM, This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=N, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=NONE, PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:XXAB_OPEN_IBE_WF_MAIL, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_!08^@@690^6@6$$^#9^#6#!0$04868!@$^86$!!`}0$8|&%%+++|9|*@, HTTP_USER_AGENT=Mozilla/4.76, RESET_NLS=N, PROCESS=PROCESSED, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, ACCOUNT=svc_oracle_mail, DISCARD=DISCARD, FROM=ACCO Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://nalinoes04.abd.ad.acco.com:8000/pls/ABPROD, INBOX=Inbox, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=lin-hera.na.acco.com, OUTBOUND_SSL_ENABLED=N, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, MAILER_SSL_TRUSTSTORE=NONE, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL, MORE_INFO_ANSWERED=WFMAIL:MORE_INFO_ANSWERED, HTML_DELIMITER=DEFAULT, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=5, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=Y, OUTBOUND_SERVER=nalinoes04.abd.ad.acco.com, INBOUND_SSL_ENABLED=N})
    Please see these docs.
    How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1]
    Unable To Make A Network Connection For IMAP Username/Password In Workflow Mailer Configuration [ID 784247.1]
    Workflow Cannot Connect to IMAP Sever: "Unable to Make a Network Connection" [ID 577592.1]
    Error Validation Error Has Occurred: Unable To Make A Network Connection During Mailer Setup [ID 834054.1]
    Unable To Connect To The Mail Account. Check The Host, User Name And Password [ID 1123684.1]
    How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
    Workflow Mailer Will Not Start Stays In Starting Status [ID 837893.1]
    Thanks,
    Hussein

  • Mail step should be sent to all the users in multiple condition

    hi experts,
                      I have a requirement on invoice posting.Say if invoice amount is 1000 then person A can post the invoice.
    if >= 1000 person B can post the invoice.
    If >=2000 person C can post the invoice.
                                                                      what i have did is, created a multiple condition and then based on the inv amount assigned 3 methods for invoice posting.My problem is if a person posts an invoice amount of 1000.A mail has to be sent to Person B and C informing that an amount of 1000 is posted with user id.Same for person B, ie mail should be sent to person A and C informing regarding invoice posting.Now inside the multiple condition i cannot assign mail step.Coz based on the condition it will go to a particular user for invoice posting but where as mail should be sent to all the users.So how can i achieve this??.

    Hi Priyanka,
    I am getting 1 thing why you need need multiple conditions. No need to create any multiple conditions.
    1. Create a rule using transaction PFAC. (you can use the example as Rule: 0000168).
        a. Create an function module with table parameters as ACTOR_TAB (type SWHACTOR) and AC_CONTAINER (Type
            SWCONT). You can aswell copy the FM used in 168 rule and change it. check the logic mentioned below.
        b. In PFAC transaction, go to container tab and create 2 container elements.  For amount and Mail_indicator (type should be
            same as that of the amount field in your workflow) .
    2. Use this Rule in your workflow to send mail.
    Logic:
    ""Lokale Schnittstelle:
    *"       TABLES
    *"              ACTOR_TAB STRUCTURE  SWHACTOR
    *"              AC_CONTAINER STRUCTURE  SWCONT
    *"       EXCEPTIONS
    *"              NOBODY_FOUND
      INCLUDE <CNTAIN>.
      DATA BEGIN OF ORG_OBJECT OCCURS 0.
              INCLUDE STRUCTURE SWHACTOR.
      DATA END OF ORG_OBJECT.
      DATA: BEGIN OF NEW_AC_CONTAINER OCCURS 3.
              INCLUDE STRUCTURE SWCONT.
      DATA: END OF NEW_AC_CONTAINER.
      DATA: V_AMOUNT TYPE <AMOUNT FIELD>.
      DATA: V_MAIL_INDICATOR TYPE <FLAG>.
      REFRESH: actor_tab.
    Get the org-object under consideration. AMOUNT is the container name defined in your PFTC transaction
      SWC_GET_ELEMENT AC_CONTAINER 'AMOUNT' 'V_AMOUNT'.
    Get the org-object-type and the org-object id.
      SWC_GET_ELEMENT AC_CONTAINER 'MAIL_INDICATOR' V_MAIL_INDICATOR .
    Pass the org-object, the org-object-type and the org-object-id
    to a new container.
    The org object get a new name: ORG_AGENT.
      SWC_SET_ELEMENT NEW_AC_CONTAINER 'AMOUNT' 'V_AMOUNT'.
      SWC_SET_ELEMENT NEW_AC_CONTAINER 'MAIL_INDICATOR' V_MAIL_INDICATOR .
    check for V_AMOUNT and V_MAIL_INDICATOR.
    if the v_amount = 1000 .'
      if  v_mail_indicator = ' '.
        actor_tab-OTYPE = 'US'  .
        actor_tab-OBJID = 'SAPUSER1'.
        append actor_tab
      else.
        actor_tab-OTYPE = 'US'  . 
        actor_tab-OBJID = 'SAPUSER2'.
        append actor_tab
        actor_tab-OTYPE = 'US'  .
        actor_tab-OBJID = 'SAPUSER3'.
        append actor_tab
      endif.
    endif.
    Similarly write the logic for other conditions.
    This way you can use same for different purposes.
    If you pass the indicator that means you are sending mail to other approvers for information.
    Revert back if u need more help.
    Regards,
    Gautham

  • Upgrade packages(mups) are not sent to ALL mobile clients

    Upgrade packages are not sent to all mobile clients even though there are
    subscriptions assigned. There are 3 sites(A,B,C) with these
    subscriptions. Only one site(A) receives the package. The other two
    sites(B and C) doesnt receive the package and their outbound queue doesnt
    show the messages.
    The subscriptions were earlier removed for these sites (B and C) and then
    added back.
    Generated all the bdocs in smoggen, gnrwb and sent the package again but in vain.

    the generation did the trick. the queue has been stopped in between and that is the reason why the packages were not sent after the bdocs were generated.

  • Notifications are not sent to some users, even after the status is green.

    Hello
    There are some notifications sent to many(4 to 5 users and i am one of them) users from the SAP system. And i can see in the SCOT transaction that the notifications are sent successfully to all the users. Status is Green(transmitted). But,the issue is that, Some users are getting the notifications and some(Incliding myself) are not.
    The users who has mail id say for example  [email protected] are getting the notifications within no time but some usres who has maild id like [email protected] are not getting the notifications even after a day.
    There are two Nodes are active in the SCOT transaction, One is SMTP and other one is Dummy.
    In the address area of the Node SMTP, around 11 users mail ids are maintained, which includes both type mail ids xxxxxxx@xyz and
    [email protected]
    And the * (star) is maintained in the address area of the Node Dummy.
    Can you please give me some clue which can help me in resolving this issue.
    Thanks for your time.
    Chetan....

    Hello Balaji,
    Thanks for your inputs.
    As i informed that, there are two nodes active in the SCOT transaction. Address area of the NODE A is already set as '*'. So, it was not possible for me to set the start * value in the address area of the NODE B. I dont think its possible to maintain * in Both the NODES.
    In the Node A, we have maintained * and in the Node B we have maintained some users mail ids. Because, as this is Quality system we dont want everyone to get the notifications.
    Thanks for your inputs.

  • Copy of notifications (mails) not received in business workplace

    Hi,
    The users stopped receiving a copy of the notifications in their business workplaces sent via mail step in a workflow.
    The WF is using the SAP username to send the mails in the mail step of the workflow (we are not using the e-mail address, just the user name so the e-mail is obtained from SU01D).
    Do you know if there is any custimization particular of the user or in general where you can set up if a copy of the e-mail can be received in the business workplace as unread document?
    Thanks!

    Sorry, I was a bit confused that you said "The users stopped receiving a copy of the notifications". So did they receive them before? Did they get both 1) email and 2) notification in business workplace?
    At least I don't know a way to get notifications in business workplace if you have the above-mentioned "forwarding" setting on in SO16. I assume that if you turn it on, it simply forward everything to the email address and notifications are not coming to business workplace anymore. But if you said that it was working before, then I don't know how did you manage to get it working .
    I would understand that you have to steps in workflow One sends notfication and one sends email. But if you somehow get this working with only one step and then get a "copy" into business workplace and email both, that is great. I would be interested to know about how to achieve this.
    Regards,
    Karri

  • Mail not sent from iphone mail app

    I tried to send a mail through the mail app through my gmail account. Was shocked that the mail was not sent nor I can find it in any of "sent" or "draft" boxes. And the very disappointing thing about this problem is that there was no errors, and I just knew about 12 hours later from the expected recipient that he did not receive my mail.
    #SHOCKING
    I hate iOS 7, thus I mat start to hate iPhone and Apple.

    Has the Mobile Me account been set up on your iPhone as POP rather than IMAP? If it has been set up as POP then any message sent will not be mirrored. Your Mobile Me account should also be configured as IMAP on all your devices in order to see those messages in your Sent Items folder.
    The idea of IMAP is to be device independent such that whatever you do is mirrored on all your devices as they each synchronize with Mobile Me. I suppose you could view the Mobile Me "cloud" as being the main repository. If you delete a message from your Inbox via your iPhone, the next time you connect your Mac that message will not appear in the associated Inbox in Mail.
    Does that make sense?
    Chris

  • Extended Notifications: Message not sent

    Hi Folks
    I had configured the extended notifications in the development system and it was working perfactly. Then I transported the customizing request for the above config to Test system.
    I have scheduled the job for SCOT and SWN_SELSEN.
    SWN_SELSEN do select the notifications to be sent but it does not send any messages.
    I have checked the application log and it displays a message SWN 032 ERROR while creating a message.
    Waiting for your expert opinion on how to resolve this issue.
    Regards
    Waz

    Hi Folks
    Thanx for sending me your answers. I found the solution to this.
    The solution lies in the activation of some services in SICF.
    List of services can be found at the following link in the Pre-requisites section:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/27/9a793426cea749b18fa409565c3dee/content.htm
    Thanks & Regards
    Waz

  • Notification mail not send

    Hi All,
    I have an issue in PR workflow.A notification mail is send to user to approve a PR,but the user says that he did not receive that notification mail.He manually goes to transaction & approve the PR & workflow gets completed.
    Please let me know how to find out the cause of this problem.In my workflow log it shows workitem approved by the user.
    What can be the cause that notification mail is not send.The user email id is maintained in su01.
    Please help.
    Thanks in advance

    Hello,
    You wrote:
    "As he executed that step manually ,automatically the workitem got deleted from the user inbox"
    This is not something that happens automatically. Is the workflow listeing out for an event which tells it that the activity represented by the step has already been done?
    I assume you mean the user performed the operation that was supposed to be done via the workflow step, not that he performed the workflow step itself. If the workflow log shows that he did perform the step, then the user is mistaken.
    regards
    Rick Bakker
    Hanabi Technology

  • Workflow notification mailer not working properly

    Hi,
    I got the following error and I have restart the services but still facing the same problem, Please advice
    Definition
    ID 10006 Name Workflow Notification Mailer
    Startup Mode Automatic Container Type Oracle Applications GSM
    Inbound Agent Workflow Notification In Queue Outbound Agent Workflow Notification Out Queue
    Correlation ID
    Status Information This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=Y, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=NONE, PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:OPEN_MAIL_FYI, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_@@#$@4@8$@8#0488$89668$$@98!8$6@@0#9@9 `99%@*B+#B&|8B*^&, HTTP_USER_AGENT=Mozilla/4.76, RESET_NLS=N, PROCESS=PROCESS, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, [email protected], DISCARD=DISCARD, FROM=Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=200, HTMLAGENT=http://erp.arabtecconstruction.com:8009/, INBOX=INBOX, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=mail.arabtecuae.com, OUTBOUND_                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Please post the details of the application release, database version and OS.
    Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Please see these docs.
    Unable To Make A Network Connection For IMAP Username/Password In Workflow Mailer Configuration [ID 784247.1]
    Workflow Cannot Connect to IMAP Sever: "Unable to Make a Network Connection" [ID 577592.1]
    Error Validation Error Has Occurred: Unable To Make A Network Connection During Mailer Setup [ID 834054.1]
    How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
    How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1]
    Unable To Connect To The Mail Account. Check The Host, User Name And Password [ID 1123684.1]
    Workflow Mailer Will Not Start Stays In Starting Status [ID 837893.1]
    Mailer cannot Connect to IMAP Server on Oracle Applications R12.1.1 [ID 1300542.1]
    Java Mailer not Starting Error in Handling Component Event [ID 297725.1]
    Inbound Processing Is Not Happening While Approving/Rejecting From Emails [ID 418931.1]
    Unable To Start Notification Mailer After Upgrade To 10.2.0.3 [ID 725852.1]
    Thanks,
    Hussein

  • APEX_MAIL - e-mail not sent anymore

    Hi,
    I created an evaluation application on apex.oracle.com. I created a page based on a procedure where a user can fill in e-mail addresses. The procedure should then send an e-mail to each e-mail address. This has worked for some time. I use APEX_MAIL.SEND to send the e-mails, and i can see them in the APEX_MAIL_QUEUE table. So far so good. But then even if i run APEX_MAIL.PUSH_QUEUE the e-mails are not sent. There are no errors in the MAIL_SEND_ERROR column.
    In the APEX_MAIL_LOG table I can see 10 e-mails, 8 of them were sent successfully (the 2 others had syntax issues in MAIL_TO, I was experimenting how strict "comma separated" was meant :-) )
    But the past 2 days I haven't been able to get any mail out. It just stacks in the queue table. I ran push_queue, without effect, and then deleted all rows in the queue to be sure the first row in the table contained a valid e-mail with existing and different mail_to and mail_from. But it has no use...
    I searched the forum but none of the existing posts solved this. Since I use apex.oracle.com I have no access to a lot of the settings, but as I said I have been able to get 10 mails out, so I suppose settings for SMTP server etc. are correct.
    Can anyone help me? Thanks,
    Jan

    I (Oracle) use(s) the latest version of apex I suppose? It's version 2.2.1.00.04
    I can't test the mailserver using PHP, as I don't know it's name/address, it's maintained by Oracle.
    My web application uses an evaluation workspace provided by Oracle, I don't have any control over "external" settings and configuration like the mail server. It is strange however that the first 10 e-mails got through (moved from APEX_MAIL_QUEUE to APEX_MAIL_LOG).
    Anyone knows about a limitation of the number of e-mails allowed by Oracle? Or anyone else uses one of these evaluation workspaces and is (un)able to send e-mail? I can't get ant mail out since november 30th.
    Thanks

  • How to see mail NOT SENT?

    i am trying to troubleshoot an issue where i am not sure if mail i write on the phone is getting sent out.
    is there a way to check for email that was written on the phone but not sent?
    also, is there a way to change a setting so that i get a confirmation that mail sent in the future goes out? i have seven or eight accounts so it would be ideal if this was one setting or one method as opposed to something i have to set in each account.
    TIA

    If an email cannot be successfully sent, it will remain in the Outbox mailbox which won't be available unless there is an email that was not successfully sent for whatever reason.
    A successfully sent email will be in the account's Sent mailbox that sent the email - an email will not be in the account's Sent mailbox unless it was successfully sent.

  • Notification mailer not sending emails for PO approvals and requistions etc

    I started my notification mailer
    Edited it and gave the smtp server IP there..I did go into advanced settings
    Than i ran a request and selected an employee defined as user in the apps for notify in the options..i saved the employee earlier with its email address
    it was working fine, but for this, shud the email address has to be defined with the user or the employee that is attched to the user?
    Second problem
    on PO approval cases, the PO maker is not receiving emails when the PO gets approved..and the approver is not receiving email notifying him that he has received a PO for approval
    Can you please tell me what am i missing?

    Hi,
    the diagnostic i ran was accoring to the note
    Oracle Workflow ATG Support: R12 Java Mailer Setup Diagnostic Test [ID 748421.1
    It has so many output files
    which one should i post
    Did you get any error/warning messages? If yes, post this part only here.Regards,Hussein                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Outgoing mail not sent

    In my email account, i am unable to send out emails.  When I click the "send" icon, a box appears.  It says to Enter Password for Acccount
    "mail.gmx.com:[email protected]", enter Password for user, with a box to type password in.  I type in Password, click "OK".  Then this same box appears with a blank line for my Password to be typed in again.  This keeps happening again and again, and my outgoing email apparently is not sent out.  I hope you can help with this vexxing problem.

    Good morning Nadia :-)
    You believe? Go on Preferences (Mail) > Accounts > Account information and check, whether there is the right server for the Outgoing Mail server (as I said, there must be "mail.gmx.de")
    If not, you should go to "edit SMTP Server list ..." and
    Account information:
    Description: smtp gmx server (or you fill in nothing)
    Server Name: mail.gmx.de
    Advanced:
    radio button checked: Use defaults ...
    Authenitfication: password
    User Name: the same as in Incoming Mail Server
    Password: the same as in Incoming Mail Server
    Hope this helps! Have a nice weekend
    marek

  • Notification Mailer not working in EBS

    Hi all,
    Notification mailer has been configured, but while starting it gives error like
    ' The Service Component Container is not running. '
    In Log file
    "FND_WEBFILE.GET_URL (CPID=0) "
    EDS Running in windows 2000 server
    All service are Running
    What does one has to do to solve this error. Can anyone suggest why this error is there.
    regards
    Gokulkumar

    Hi,
    You need to have the Workflow Agent Listener (its service container) up and running for the Notification Mailer to be up and running. Please start this, and then WF Mailer should start - if configured.
    Rgds,
    Rakesh.

Maybe you are looking for

  • Can I sync iPad on two computers?

    Is it possible to sync them using both my MBP and my iMac?

  • When i transfer my photo to pc, they are all rotated for 180 degrees

    Well,just like it says. I was trying to backup my photos to my hard disk to free up my phone space. But all photo are rotated for 180 degrees on my pc. It is immposible to watch those on pc. Did i do something wrong? 

  • Org Structure Craetion - 2

    There is a req to create new Company since client moved into new business. Company Policies, Work Timings, Leaves everything remains same including Grades & Levels, everything will be same. Finance Team Created New Company Code... For my part I intia

  • An error occurred in system during account assignment RFC way

    Hello Partners. I created a function ( FM ) type RFC and this FM call CRM_ORDER_MAINTAIN . The function creates Service Reques 'BUS2000223'. When I test the function locally, All is ok. But when the function is called from SAP IS-U, I have a problem

  • Creative Cloud's Photography-plan vs. Single App-plan

    I'm wondering about goiing for a Creative Cloud solution. I'm only interested in Photoshop. So what's the difference between the Photography-plan and the Single App-plan? Is the Photoshop-version that comes with the Photography-plan the full version?